Attachment 300007 Details for Bug 440180 – output of dmesg

output of dmesg

crash.log (text/plain), 120.88 KB, created by Alex Eskin on 2008-04-02 02:57:50 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Alex Eskin

Created: 2008-04-02 02:57:50 UTC

Size: 120.88 KB

patch

obsolete

>er of device 0000:00:1f.1 to 64
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
>ata1.00: HPA detected: current 110302575, native 117210240
>ata1.00: ATA-6: HTS726060M9AT00, MH4OA6GA, max UDMA/100
>ata1.00: 110302575 sectors, multi 16: LBA 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4242N, 0201, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      HTS726060M9AT00  MH4O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4242N 0201 PQ: 0 ANSI: 5
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>radeonfb: Retrieved PLL infos from BIOS
>radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=252.00 Mhz, System=200.00 MHz
>radeonfb: PLL min 20000 max 35000
>i2c-adapter i2c-1: unable to read EDID block.
>i2c-adapter i2c-1: unable to read EDID block.
>i2c-adapter i2c-1: unable to read EDID block.
>i2c-adapter i2c-3: unable to read EDID block.
>i2c-adapter i2c-3: unable to read EDID block.
>i2c-adapter i2c-3: unable to read EDID block.
>Non-DDC laptop panel detected
>i2c-adapter i2c-2: unable to read EDID block.
>i2c-adapter i2c-2: unable to read EDID block.
>i2c-adapter i2c-2: unable to read EDID block.
>i2c-adapter i2c-3: unable to read EDID block.
>i2c-adapter i2c-3: unable to read EDID block.
>i2c-adapter i2c-3: unable to read EDID block.
>radeonfb: Monitor 1 type LCD found
>radeonfb: Monitor 2 type no found
>radeonfb: panel ID string: SXGA+ Single (85MHz)    
>radeonfb: detected LVDS panel size from BIOS: 1400x1050
>radeondb: BIOS provided dividers will be used
>radeonfb: Dynamic Clock Power Management enabled
>radeonfb: IBM Thinkpad R50/R51/T40/T41 detected, enabling workaround
>fbcon: ATI Radeon Lf  (fb0) is primary device
>Console: switching to colour frame buffer device 175x65
>radeonfb (0000:01:00.0): ATI Radeon Lf 
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:8192 avtab hash slots allocated.Num of rules:217677
>SELinux:8192 avtab hash slots allocated.Num of rules:217677
>security:  8 users, 12 roles, 2372 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 217677 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1206571120.681:2): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>thinkpad_acpi: ThinkPad ACPI Extras v0.17
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 1RETDOWW (3.20 ), EC 1RHT71WW-3.04
>thinkpad_acpi: IBM ThinkPad T41 
>thinkpad_acpi: another device driver is already handling bay events
>thinkpad_acpi: disabling subdriver bay
>input: ThinkPad Extra Buttons as /class/input/input3
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>input: Video Bus as /class/input/input7
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0d:60:af:25:e3
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>input: PC Speaker as /class/input/input8
>parport_pc 00:0b: reported by Plug and Play ACPI
>parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
>NET: Registered protocol family 23
>nsc-ircc 00:0c: activated
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>IrDA: Registered device irda0
>nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>ath5k_pci 0000:02:02.0: registered as 'phy0'
>phy0: Selected rate control algorithm 'pid'
>ath5k phy0: Atheros AR5213 chip found (MAC: 0x56, PHY: 0x41)
>ath5k phy0: RF5111 5GHz radio found (0x17)
>ath5k phy0: RF2111 2GHz radio found (0x23)
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ALSA sound/pci/ac97/ac97_codec.c:2121: AC'97 0 analog subsections not ready
>Clocksource tsc unstable (delta = -139134117 ns)
>intel8x0_measure_ac97_clock: measured 50372 usecs
>intel8x0: clocking to 48000
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.28.0 20060524 on minor 0
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>fuse init (API version 7.9)
>SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>audit(1206589154.395:3): audit_pid=1949 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>mtrr: no MTRR for e0000000,2000000 found
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: RX authentication from 00:14:6c:3d:7c:d0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:6c:3d:7c:d0
>wlan0: RX AssocResp from 00:14:6c:3d:7c:d0 (capab=0x421 status=0 aid=17)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Setting GART location based on new memory map
>[drm] Loading R200 Microcode
>[drm] writeback test succeeded in 2 usecs
>wlan0: no IPv6 routers present
>usb 1-4: new high speed USB device using ehci_hcd and address 2
>usb 1-4: configuration #1 chosen from 2 choices
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>ISO 9660 Extensions: Microsoft Joliet Level 3
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     Apple    iPod             1.62 PQ: 0 ANSI: 0
>sd 2:0:0:0: [sdb] 58605120 512-byte hardware sectors (30006 MB)
>ISO 9660 Extensions: RRIP_1991A
>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 6c 00 00 08
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
>sd 2:0:0:0: [sdb] 58605120 512-byte hardware sectors (30006 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 6c 00 00 08
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1 sdb2
>sd 2:0:0:0: [sdb] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>SELinux: initialized (dev sdb2, type vfat), uses genfs_contexts
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX AssocResp from 00:18:4d:8f:1d:14 (capab=0x431 status=0 aid=1)
>wlan0: associated
>wlan0: no IPv6 routers present
>usb 1-4: USB disconnect, address 2
>usb 1-4: new high speed USB device using ehci_hcd and address 3
>usb 1-4: configuration #1 chosen from 2 choices
>scsi3 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 3:0:0:0: Direct-Access     Apple    iPod             1.62 PQ: 0 ANSI: 0
>sd 3:0:0:0: [sdb] 58605120 512-byte hardware sectors (30006 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 6c 00 00 08
>sd 3:0:0:0: [sdb] Assuming drive cache: write through
>sd 3:0:0:0: [sdb] 58605120 512-byte hardware sectors (30006 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 6c 00 00 08
>sd 3:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1 sdb2
>sd 3:0:0:0: [sdb] Attached SCSI removable disk
>sd 3:0:0:0: Attached scsi generic sg2 type 0
>SELinux: initialized (dev sdb2, type vfat), uses genfs_contexts
>usb 1-4: USB disconnect, address 3
>wlan0: disassociate(reason=3)
>wlan0: disassociate(reason=3)
>Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.02 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>nsc-ircc 00:0c: disabled
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI: PCI interrupt for device 0000:02:02.0 disabled
>ACPI: PCI interrupt for device 0000:02:01.0 disabled
>ACPI handle has no context!
>radeonfb (0000:01:00.0): suspending for event: 2...
>radeonfb (0000:01:00.0): switching to D2 state...
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>Disabling non-boot CPUs ...
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1.01: _GTF evaluation failed (AE 0x1001)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata2.01: _GTF evaluation failed (AE 0x1001)
>ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata2.00: configured for UDMA/33
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>radeonfb (0000:01:00.0): resuming from state: 2...
>radeonfb (0000:01:00.0): switching to D0 state...
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>serial 00:0a: activated
>parport_pc 00:0b: activated
>nsc-ircc 00:0c: activated
>sd 0:0:0:0: [sda] Starting disk
>PM: Finishing wakeup.
>Restarting tasks ... <3>hub 3-0:1.0: over-current change on port 1
>hub 3-0:1.0: over-current change on port 2
>done.
>hub 1-0:1.0: over-current change on port 3
>hub 1-0:1.0: over-current change on port 4
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: RX authentication from 00:14:6c:3d:7c:d0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:6c:3d:7c:d0
>wlan0: RX AssocResp from 00:14:6c:3d:7c:d0 (capab=0x421 status=0 aid=16)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Loading R200 Microcode
>VFS: busy inodes on changed media.
>VFS: busy inodes on changed media.
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: no IPv6 routers present
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX AssocResp from 00:18:4d:8f:1d:14 (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: No ProbeResp from current AP 00:18:4d:8f:1d:14 - assume out of range
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX ReassocResp from 00:18:4d:8f:1d:14 (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: no IPv6 routers present
>wlan0: disassociate(reason=3)
>wlan0: disassociate(reason=3)
>Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>nsc-ircc 00:0c: disabled
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI: PCI interrupt for device 0000:02:02.0 disabled
>ACPI: PCI interrupt for device 0000:02:01.0 disabled
>ACPI handle has no context!
>radeonfb (0000:01:00.0): suspending for event: 2...
>radeonfb (0000:01:00.0): switching to D2 state...
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>Disabling non-boot CPUs ...
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1.01: _GTF evaluation failed (AE 0x1001)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata2.01: _GTF evaluation failed (AE 0x1001)
>ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata2.00: configured for UDMA/33
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>radeonfb (0000:01:00.0): resuming from state: 2...
>radeonfb (0000:01:00.0): switching to D0 state...
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>serial 00:0a: activated
>parport_pc 00:0b: activated
>nsc-ircc 00:0c: activated
>sd 0:0:0:0: [sda] Starting disk
>PM: Finishing wakeup.
>Restarting tasks ... <3>hub 3-0:1.0: over-current change on port 1
>hub 3-0:1.0: over-current change on port 2
>done.
>hub 1-0:1.0: over-current change on port 3
>hub 1-0:1.0: over-current change on port 4
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:0c:41:6f:ab:0e
>wlan0: RX authentication from 00:0c:41:6f:ab:0e (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:0c:41:6f:ab:0e
>wlan0: RX AssocResp from 00:0c:41:6f:ab:0e (capab=0x5 status=0 aid=2)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: association frame received from 00:0c:41:6f:ab:0e, but not in associate state - ignored
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Loading R200 Microcode
>VFS: busy inodes on changed media.
>VFS: busy inodes on changed media.
>wlan0: no IPv6 routers present
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX AssocResp from 00:18:4d:8f:1d:14 (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: No ProbeResp from current AP 00:18:4d:8f:1d:14 - assume out of range
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX ReassocResp from 00:18:4d:8f:1d:14 (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: no IPv6 routers present
>ath5k phy0: noise floor calibration timeout (2462MHz)
>wlan0: CTS protection enabled (BSSID=00:18:4d:8f:1d:14)
>wlan0: CTS protection disabled (BSSID=00:18:4d:8f:1d:14)
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX AssocResp from 00:18:4d:8f:1d:14 (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: disassociate(reason=3)
>wlan0: disassociate(reason=3)
>Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>nsc-ircc 00:0c: disabled
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI: PCI interrupt for device 0000:02:02.0 disabled
>ACPI: PCI interrupt for device 0000:02:01.0 disabled
>ACPI handle has no context!
>radeonfb (0000:01:00.0): suspending for event: 2...
>radeonfb (0000:01:00.0): switching to D2 state...
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>Disabling non-boot CPUs ...
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1.01: _GTF evaluation failed (AE 0x1001)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata2.01: _GTF evaluation failed (AE 0x1001)
>ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata2.00: configured for UDMA/33
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>radeonfb (0000:01:00.0): resuming from state: 2...
>radeonfb (0000:01:00.0): switching to D0 state...
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>serial 00:0a: activated
>parport_pc 00:0b: activated
>nsc-ircc 00:0c: activated
>sd 0:0:0:0: [sda] Starting disk
>PM: Finishing wakeup.
>Restarting tasks ... <3>hub 3-0:1.0: over-current change on port 1
>hub 3-0:1.0: over-current change on port 2
>done.
>hub 1-0:1.0: over-current change on port 3
>hub 1-0:1.0: over-current change on port 4
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: RX authentication from 00:14:6c:3d:7c:d0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:6c:3d:7c:d0
>wlan0: RX AssocResp from 00:14:6c:3d:7c:d0 (capab=0x421 status=0 aid=16)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Loading R200 Microcode
>wlan0: No ProbeResp from current AP 00:14:6c:3d:7c:d0 - assume out of range
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: RX authentication from 00:14:6c:3d:7c:d0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:6c:3d:7c:d0
>wlan0: RX ReassocResp from 00:14:6c:3d:7c:d0 (capab=0x421 status=0 aid=16)
>wlan0: associated
>VFS: busy inodes on changed media.
>VFS: busy inodes on changed media.
>wlan0: no IPv6 routers present
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: RX authentication from 00:14:6c:3d:7c:d0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:6c:3d:7c:d0
>wlan0: disassociate(reason=3)
>wlan0: disassociate(reason=3)
>wlan0: RX AssocResp from 00:14:6c:3d:7c:d0 (capab=0x421 status=0 aid=16)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX AssocResp from 00:18:4d:8f:1d:14 (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: No ProbeResp from current AP 00:18:4d:8f:1d:14 - assume out of range
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX ReassocResp from 00:18:4d:8f:1d:14 (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: no IPv6 routers present
>wlan0: no IPv6 routers present
>npviewer.bin[18900]: segfault at f3b19490 eip 00ae5037 esp 08ed8370 error 5
>wlan0: disassociate(reason=3)
>wlan0: disassociate(reason=3)
>Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>nsc-ircc 00:0c: disabled
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI: PCI interrupt for device 0000:02:02.0 disabled
>ACPI: PCI interrupt for device 0000:02:01.0 disabled
>ACPI handle has no context!
>radeonfb (0000:01:00.0): suspending for event: 2...
>radeonfb (0000:01:00.0): switching to D2 state...
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>Disabling non-boot CPUs ...
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1.01: _GTF evaluation failed (AE 0x1001)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata2.01: _GTF evaluation failed (AE 0x1001)
>ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata2.00: configured for UDMA/33
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>radeonfb (0000:01:00.0): resuming from state: 2...
>radeonfb (0000:01:00.0): switching to D0 state...
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>serial 00:0a: activated
>parport_pc 00:0b: activated
>nsc-ircc 00:0c: activated
>sd 0:0:0:0: [sda] Starting disk
>PM: Finishing wakeup.
>Restarting tasks ... <3>hub 3-0:1.0: over-current change on port 1
>done.
>hub 3-0:1.0: over-current change on port 2
>hub 1-0:1.0: over-current change on port 3
>hub 1-0:1.0: over-current change on port 4
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: RX authentication from 00:14:6c:3d:7c:d0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:6c:3d:7c:d0
>wlan0: RX AssocResp from 00:14:6c:3d:7c:d0 (capab=0x421 status=0 aid=16)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Loading R200 Microcode
>wlan0: No ProbeResp from current AP 00:14:6c:3d:7c:d0 - assume out of range
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: RX authentication from 00:14:6c:3d:7c:d0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:6c:3d:7c:d0
>wlan0: RX ReassocResp from 00:14:6c:3d:7c:d0 (capab=0x421 status=0 aid=16)
>wlan0: associated
>VFS: busy inodes on changed media.
>VFS: busy inodes on changed media.
>wlan0: no IPv6 routers present
>process `skype' is using obsolete setsockopt SO_BSDCOMPAT
>wlan0: disassociate(reason=3)
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>nsc-ircc 00:0c: disabled
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI: PCI interrupt for device 0000:02:02.0 disabled
>ACPI: PCI interrupt for device 0000:02:01.0 disabled
>ACPI handle has no context!
>radeonfb (0000:01:00.0): suspending for event: 2...
>radeonfb (0000:01:00.0): switching to D2 state...
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>Disabling non-boot CPUs ...
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1.01: _GTF evaluation failed (AE 0x1001)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata2.01: _GTF evaluation failed (AE 0x1001)
>ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata2.00: configured for UDMA/33
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>radeonfb (0000:01:00.0): resuming from state: 2...
>radeonfb (0000:01:00.0): switching to D0 state...
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>serial 00:0a: activated
>parport_pc 00:0b: activated
>nsc-ircc 00:0c: activated
>sd 0:0:0:0: [sda] Starting disk
>PM: Finishing wakeup.
>Restarting tasks ... <3>hub 3-0:1.0: over-current change on port 1
>done.
>hub 3-0:1.0: over-current change on port 2
>hub 1-0:1.0: over-current change on port 3
>hub 1-0:1.0: over-current change on port 4
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:0c:41:6f:ab:0e
>wlan0: RX authentication from 00:0c:41:6f:ab:0e (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:0c:41:6f:ab:0e
>wlan0: RX AssocResp from 00:0c:41:6f:ab:0e (capab=0x5 status=0 aid=6)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Loading R200 Microcode
>wlan0: no IPv6 routers present
>VFS: busy inodes on changed media.
>VFS: busy inodes on changed media.
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX AssocResp from 00:18:4d:8f:1d:14 (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: No ProbeResp from current AP 00:18:4d:8f:1d:14 - assume out of range
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX ReassocResp from 00:18:4d:8f:1d:14 (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: no IPv6 routers present
>wlan0: disassociate(reason=3)
>wlan0: disassociate(reason=3)
>Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>nsc-ircc 00:0c: disabled
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI: PCI interrupt for device 0000:02:02.0 disabled
>ACPI: PCI interrupt for device 0000:02:01.0 disabled
>ACPI handle has no context!
>radeonfb (0000:01:00.0): suspending for event: 2...
>radeonfb (0000:01:00.0): switching to D2 state...
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>Disabling non-boot CPUs ...
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1.01: _GTF evaluation failed (AE 0x1001)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata2.01: _GTF evaluation failed (AE 0x1001)
>ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata2.00: configured for UDMA/33
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>radeonfb (0000:01:00.0): resuming from state: 2...
>radeonfb (0000:01:00.0): switching to D0 state...
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>serial 00:0a: activated
>parport_pc 00:0b: activated
>nsc-ircc 00:0c: activated
>sd 0:0:0:0: [sda] Starting disk
>PM: Finishing wakeup.
>Restarting tasks ... <3>hub 3-0:1.0: over-current change on port 1
>done.
>hub 3-0:1.0: over-current change on port 2
>hub 1-0:1.0: over-current change on port 3
>hub 1-0:1.0: over-current change on port 4
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:0c:41:6f:ab:0e
>wlan0: RX authentication from 00:0c:41:6f:ab:0e (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:0c:41:6f:ab:0e
>wlan0: authentication frame received from 00:0c:41:6f:ab:0e, but not in authenticate state - ignored
>wlan0: RX AssocResp from 00:0c:41:6f:ab:0e (capab=0x5 status=0 aid=6)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Loading R200 Microcode
>VFS: busy inodes on changed media.
>VFS: busy inodes on changed media.
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: no IPv6 routers present
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX AssocResp from 00:18:4d:8f:1d:14 (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: No ProbeResp from current AP 00:18:4d:8f:1d:14 - assume out of range
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX ReassocResp from 00:18:4d:8f:1d:14 (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: no IPv6 routers present
>wlan0: disassociate(reason=3)
>wlan0: disassociate(reason=3)
>Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>nsc-ircc 00:0c: disabled
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI: PCI interrupt for device 0000:02:02.0 disabled
>ACPI: PCI interrupt for device 0000:02:01.0 disabled
>ACPI handle has no context!
>radeonfb (0000:01:00.0): suspending for event: 2...
>radeonfb (0000:01:00.0): switching to D2 state...
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>Disabling non-boot CPUs ...
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1.01: _GTF evaluation failed (AE 0x1001)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata2.01: _GTF evaluation failed (AE 0x1001)
>ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata2.00: configured for UDMA/33
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>radeonfb (0000:01:00.0): resuming from state: 2...
>radeonfb (0000:01:00.0): switching to D0 state...
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>serial 00:0a: activated
>parport_pc 00:0b: activated
>nsc-ircc 00:0c: activated
>sd 0:0:0:0: [sda] Starting disk
>PM: Finishing wakeup.
>Restarting tasks ... <3>hub 3-0:1.0: over-current change on port 1
>hub 3-0:1.0: over-current change on port 2
>done.
>hub 1-0:1.0: over-current change on port 3
>hub 1-0:1.0: over-current change on port 4
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:0c:41:6f:ab:0e
>wlan0: RX authentication from 00:0c:41:6f:ab:0e (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:0c:41:6f:ab:0e
>wlan0: RX AssocResp from 00:0c:41:6f:ab:0e (capab=0x5 status=0 aid=6)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Loading R200 Microcode
>wlan0: RX non-WEP frame, but expected encryption
>VFS: busy inodes on changed media.
>VFS: busy inodes on changed media.
>wlan0: no IPv6 routers present
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX AssocResp from 00:18:4d:8f:1d:14 (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: No ProbeResp from current AP 00:18:4d:8f:1d:14 - assume out of range
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX ReassocResp from 00:18:4d:8f:1d:14 (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: no IPv6 routers present
>wlan0: CTS protection enabled (BSSID=00:18:4d:8f:1d:14)
>wlan0: disassociate(reason=3)
>wlan0: disassociate(reason=3)
>Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>nsc-ircc 00:0c: disabled
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI: PCI interrupt for device 0000:02:02.0 disabled
>ACPI: PCI interrupt for device 0000:02:01.0 disabled
>ACPI handle has no context!
>radeonfb (0000:01:00.0): suspending for event: 2...
>radeonfb (0000:01:00.0): switching to D2 state...
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>Disabling non-boot CPUs ...
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1.01: _GTF evaluation failed (AE 0x1001)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata2.01: _GTF evaluation failed (AE 0x1001)
>ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata2.00: configured for UDMA/33
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>radeonfb (0000:01:00.0): resuming from state: 2...
>radeonfb (0000:01:00.0): switching to D0 state...
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>serial 00:0a: activated
>parport_pc 00:0b: activated
>nsc-ircc 00:0c: activated
>sd 0:0:0:0: [sda] Starting disk
>PM: Finishing wakeup.
>Restarting tasks ... <3>hub 3-0:1.0: over-current change on port 1
>hub 3-0:1.0: over-current change on port 2
>done.
>hub 1-0:1.0: over-current change on port 3
>hub 1-0:1.0: over-current change on port 4
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: RX authentication from 00:14:6c:3d:7c:d0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:6c:3d:7c:d0
>wlan0: RX AssocResp from 00:14:6c:3d:7c:d0 (capab=0x421 status=0 aid=17)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Loading R200 Microcode
>wlan0: No ProbeResp from current AP 00:14:6c:3d:7c:d0 - assume out of range
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: RX authentication from 00:14:6c:3d:7c:d0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:6c:3d:7c:d0
>wlan0: RX ReassocResp from 00:14:6c:3d:7c:d0 (capab=0x421 status=0 aid=17)
>wlan0: associated
>VFS: busy inodes on changed media.
>VFS: busy inodes on changed media.
>wlan0: no IPv6 routers present
>wlan0: disassociate(reason=3)
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>nsc-ircc 00:0c: disabled
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI: PCI interrupt for device 0000:02:02.0 disabled
>ACPI: PCI interrupt for device 0000:02:01.0 disabled
>ACPI handle has no context!
>radeonfb (0000:01:00.0): suspending for event: 2...
>radeonfb (0000:01:00.0): switching to D2 state...
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>Disabling non-boot CPUs ...
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1.01: _GTF evaluation failed (AE 0x1001)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata2.01: _GTF evaluation failed (AE 0x1001)
>ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata2.00: configured for UDMA/33
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>radeonfb (0000:01:00.0): resuming from state: 2...
>radeonfb (0000:01:00.0): switching to D0 state...
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>serial 00:0a: activated
>parport_pc 00:0b: activated
>nsc-ircc 00:0c: activated
>sd 0:0:0:0: [sda] Starting disk
>PM: Finishing wakeup.
>Restarting tasks ... <3>hub 3-0:1.0: over-current change on port 1
>hub 3-0:1.0: over-current change on port 2
>done.
>hub 1-0:1.0: over-current change on port 3
>hub 1-0:1.0: over-current change on port 4
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: RX authentication from 00:14:6c:3d:7c:d0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:6c:3d:7c:d0
>wlan0: RX AssocResp from 00:14:6c:3d:7c:d0 (capab=0x421 status=0 aid=17)
>wlan0: associated
>wlan0: No ProbeResp from current AP 00:14:6c:3d:7c:d0 - assume out of range
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Loading R200 Microcode
>VFS: busy inodes on changed media.
>VFS: busy inodes on changed media.
>wlan0: no IPv6 routers present
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: RX authentication from 00:14:6c:3d:7c:d0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:6c:3d:7c:d0
>wlan0: RX ReassocResp from 00:14:6c:3d:7c:d0 (capab=0x421 status=0 aid=17)
>wlan0: associated
>wlan0: no IPv6 routers present
>wlan0: No ProbeResp from current AP 00:14:6c:3d:7c:d0 - assume out of range
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: RX authentication from 00:14:6c:3d:7c:d0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:6c:3d:7c:d0
>wlan0: authentication frame received from 00:14:6c:3d:7c:d0, but not in authenticate state - ignored
>wlan0: authentication frame received from 00:14:6c:3d:7c:d0, but not in authenticate state - ignored
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: association frame received from 00:14:6c:3d:7c:d0, but not in associate state - ignored
>wlan0: RX authentication from 00:14:6c:3d:7c:d0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:6c:3d:7c:d0
>wlan0: RX deauthentication from 00:14:6c:3d:7c:d0 (reason=6)
>wlan0: deauthenticated
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: authentication with AP 00:14:6c:3d:7c:d0 timed out
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX AssocResp from 00:18:4d:8f:1d:14 (capab=0x431 status=0 aid=2)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present
>wlan0: CTS protection enabled (BSSID=00:18:4d:8f:1d:14)
>wlan0: CTS protection disabled (BSSID=00:18:4d:8f:1d:14)
>wlan0: CTS protection enabled (BSSID=00:18:4d:8f:1d:14)
>wlan0: CTS protection disabled (BSSID=00:18:4d:8f:1d:14)
>wlan0: CTS protection enabled (BSSID=00:18:4d:8f:1d:14)
>polygon[25820]: segfault at 00000008 eip 08064e44 esp bf8b62b0 error 4
>polygon[25956]: segfault at 00000008 eip 08064417 esp bfe5c8a0 error 4
>gdb[26055]: segfault at 00000014 eip 080f4755 esp bfa8b980 error 4
>polygon[26069]: segfault at 00000008 eip 08064417 esp bf9631d0 error 4
>polygon[26086]: segfault at 00000008 eip 08064417 esp bf89c8f0 error 4
>wlan0: disassociate(reason=3)
>wlan0: disassociate(reason=3)
>Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>nsc-ircc 00:0c: disabled
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI: PCI interrupt for device 0000:02:02.0 disabled
>ACPI: PCI interrupt for device 0000:02:01.0 disabled
>ACPI handle has no context!
>radeonfb (0000:01:00.0): suspending for event: 2...
>radeonfb (0000:01:00.0): switching to D2 state...
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>Disabling non-boot CPUs ...
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1.01: _GTF evaluation failed (AE 0x1001)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata2.01: _GTF evaluation failed (AE 0x1001)
>ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata2.00: configured for UDMA/33
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>radeonfb (0000:01:00.0): resuming from state: 2...
>radeonfb (0000:01:00.0): switching to D0 state...
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>serial 00:0a: activated
>parport_pc 00:0b: activated
>nsc-ircc 00:0c: activated
>sd 0:0:0:0: [sda] Starting disk
>PM: Finishing wakeup.
>Restarting tasks ... <3>hub 3-0:1.0: over-current change on port 1
>hub 3-0:1.0: over-current change on port 2
>done.
>hub 1-0:1.0: over-current change on port 3
>hub 1-0:1.0: over-current change on port 4
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: authentication with AP 00:14:6c:3d:7c:d0 timed out
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Loading R200 Microcode
>VFS: busy inodes on changed media.
>VFS: busy inodes on changed media.
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX AssocResp from 00:18:4d:8f:1d:14 (capab=0x31 status=0 aid=2)
>wlan0: associated
>wlan0: CTS protection enabled (BSSID=00:18:4d:8f:1d:14)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present
>wlan0: CTS protection disabled (BSSID=00:18:4d:8f:1d:14)
>wlan0: CTS protection enabled (BSSID=00:18:4d:8f:1d:14)
>wlan0: CTS protection disabled (BSSID=00:18:4d:8f:1d:14)
>wlan0: disassociate(reason=3)
>wlan0: disassociate(reason=3)
>Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>nsc-ircc 00:0c: disabled
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI: PCI interrupt for device 0000:02:02.0 disabled
>ACPI: PCI interrupt for device 0000:02:01.0 disabled
>ACPI handle has no context!
>radeonfb (0000:01:00.0): suspending for event: 2...
>radeonfb (0000:01:00.0): switching to D2 state...
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>Disabling non-boot CPUs ...
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1.01: _GTF evaluation failed (AE 0x1001)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata2.01: _GTF evaluation failed (AE 0x1001)
>ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata2.00: configured for UDMA/33
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>radeonfb (0000:01:00.0): resuming from state: 2...
>radeonfb (0000:01:00.0): switching to D0 state...
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>serial 00:0a: activated
>parport_pc 00:0b: activated
>nsc-ircc 00:0c: activated
>sd 0:0:0:0: [sda] Starting disk
>PM: Finishing wakeup.
>Restarting tasks ... <3>hub 3-0:1.0: over-current change on port 1
>hub 3-0:1.0: over-current change on port 2
>done.
>hub 1-0:1.0: over-current change on port 3
>hub 1-0:1.0: over-current change on port 4
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: authentication with AP 00:14:6c:3d:7c:d0 timed out
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Loading R200 Microcode
>VFS: busy inodes on changed media.
>VFS: busy inodes on changed media.
>ath5k phy0: noise floor calibration failed (2462MHz)
>ath5k phy0: noise floor calibration failed (2462MHz)
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX AssocResp from 00:18:4d:8f:1d:14 (capab=0x431 status=0 aid=2)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present
>wlan0: disassociate(reason=3)
>wlan0: disassociate(reason=3)
>Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>nsc-ircc 00:0c: disabled
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI: PCI interrupt for device 0000:02:02.0 disabled
>ACPI: PCI interrupt for device 0000:02:01.0 disabled
>ACPI handle has no context!
>radeonfb (0000:01:00.0): suspending for event: 2...
>radeonfb (0000:01:00.0): switching to D2 state...
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>Disabling non-boot CPUs ...
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1.01: _GTF evaluation failed (AE 0x1001)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata2.01: _GTF evaluation failed (AE 0x1001)
>ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata2.00: configured for UDMA/33
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>radeonfb (0000:01:00.0): resuming from state: 2...
>radeonfb (0000:01:00.0): switching to D0 state...
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>serial 00:0a: activated
>parport_pc 00:0b: activated
>nsc-ircc 00:0c: activated
>sd 0:0:0:0: [sda] Starting disk
>PM: Finishing wakeup.
>Restarting tasks ... <3>hub 3-0:1.0: over-current change on port 1
>done.
>hub 3-0:1.0: over-current change on port 2
>hub 1-0:1.0: over-current change on port 3
>hub 1-0:1.0: over-current change on port 4
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:07:49:32
>wlan0: RX authentication from 00:18:4d:07:49:32 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:07:49:32
>wlan0: RX AssocResp from 00:18:4d:07:49:32 (capab=0x601 status=0 aid=2)
>wlan0: associated
>wlan0: switched to long barker preamble (BSSID=00:18:4d:07:49:32)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Loading R200 Microcode
>wlan0: RX non-WEP frame, but expected encryption
>VFS: busy inodes on changed media.
>VFS: busy inodes on changed media.
>wlan0: no IPv6 routers present
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX AssocResp from 00:18:4d:8f:1d:14 (capab=0x31 status=0 aid=4)
>wlan0: associated
>wlan0: No ProbeResp from current AP 00:18:4d:8f:1d:14 - assume out of range
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX ReassocResp from 00:18:4d:8f:1d:14 (capab=0x31 status=0 aid=4)
>wlan0: associated
>wlan0: no IPv6 routers present
>wlan0: CTS protection enabled (BSSID=00:18:4d:8f:1d:14)
>wlan0: CTS protection disabled (BSSID=00:18:4d:8f:1d:14)
>wlan0: CTS protection enabled (BSSID=00:18:4d:8f:1d:14)
>usb 1-4: new high speed USB device using ehci_hcd and address 4
>usb 1-4: configuration #1 chosen from 2 choices
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 4:0:0:0: Direct-Access     Apple    iPod             1.62 PQ: 0 ANSI: 0
>sd 4:0:0:0: [sdb] 58605120 512-byte hardware sectors (30006 MB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 6c 00 00 08
>sd 4:0:0:0: [sdb] Assuming drive cache: write through
>sd 4:0:0:0: [sdb] 58605120 512-byte hardware sectors (30006 MB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 6c 00 00 08
>sd 4:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1 sdb2
>sd 4:0:0:0: [sdb] Attached SCSI removable disk
>sd 4:0:0:0: Attached scsi generic sg2 type 0
>SELinux: initialized (dev sdb2, type vfat), uses genfs_contexts
>wlan0: CTS protection disabled (BSSID=00:18:4d:8f:1d:14)
>wlan0: CTS protection enabled (BSSID=00:18:4d:8f:1d:14)
>wlan0: CTS protection disabled (BSSID=00:18:4d:8f:1d:14)
>wlan0: CTS protection enabled (BSSID=00:18:4d:8f:1d:14)
>wlan0: CTS protection disabled (BSSID=00:18:4d:8f:1d:14)
>usb 1-4: USB disconnect, address 4
>wlan0: disassociate(reason=3)
>wlan0: disassociate(reason=3)
>Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.01 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>nsc-ircc 00:0c: disabled
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI: PCI interrupt for device 0000:02:02.0 disabled
>ACPI: PCI interrupt for device 0000:02:01.0 disabled
>ACPI handle has no context!
>radeonfb (0000:01:00.0): suspending for event: 2...
>radeonfb (0000:01:00.0): switching to D2 state...
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>Disabling non-boot CPUs ...
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1.01: _GTF evaluation failed (AE 0x1001)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata2.01: _GTF evaluation failed (AE 0x1001)
>ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata2.00: configured for UDMA/33
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>radeonfb (0000:01:00.0): resuming from state: 2...
>radeonfb (0000:01:00.0): switching to D0 state...
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>serial 00:0a: activated
>parport_pc 00:0b: activated
>nsc-ircc 00:0c: activated
>sd 0:0:0:0: [sda] Starting disk
>PM: Finishing wakeup.
>Restarting tasks ... <3>hub 3-0:1.0: over-current change on port 1
>done.
>hub 3-0:1.0: over-current change on port 2
>hub 1-0:1.0: over-current change on port 3
>hub 1-0:1.0: over-current change on port 4
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: RX authentication from 00:14:6c:3d:7c:d0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:6c:3d:7c:d0
>wlan0: RX AssocResp from 00:14:6c:3d:7c:d0 (capab=0x421 status=0 aid=19)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Loading R200 Microcode
>VFS: busy inodes on changed media.
>VFS: busy inodes on changed media.
>wlan0: no IPv6 routers present
>ath5k phy0: noise floor calibration timeout (2417MHz)
>wlan0: No ProbeResp from current AP 00:14:6c:3d:7c:d0 - assume out of range
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX AssocResp from 00:18:4d:8f:1d:14 (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: no IPv6 routers present
>wlan0: CTS protection enabled (BSSID=00:18:4d:8f:1d:14)
>wlan0: CTS protection disabled (BSSID=00:18:4d:8f:1d:14)
>ath5k phy0: noise floor calibration timeout (2462MHz)
>wlan0: disassociate(reason=3)
>wlan0: disassociate(reason=3)
>Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>nsc-ircc 00:0c: disabled
>parport_pc 00:0b: disabled
>serial 00:0a: disabled
>ACPI: PCI interrupt for device 0000:02:02.0 disabled
>ACPI: PCI interrupt for device 0000:02:01.0 disabled
>ACPI handle has no context!
>radeonfb (0000:01:00.0): suspending for event: 2...
>radeonfb (0000:01:00.0): switching to D2 state...
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>Disabling non-boot CPUs ...
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb2: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1.01: _GTF evaluation failed (AE 0x1001)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata2.01: _GTF evaluation failed (AE 0x1001)
>ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
>ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
>ata2.00: configured for UDMA/33
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>radeonfb (0000:01:00.0): resuming from state: 2...
>radeonfb (0000:01:00.0): switching to D0 state...
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 110302575 512-byte hardware sectors (56475 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>serial 00:0a: activated
>parport_pc 00:0b: activated
>nsc-ircc 00:0c: activated
>sd 0:0:0:0: [sda] Starting disk
>PM: Finishing wakeup.
>Restarting tasks ... <3>hub 3-0:1.0: over-current change on port 1
>done.
>hub 3-0:1.0: over-current change on port 2
>hub 1-0:1.0: over-current change on port 3
>hub 1-0:1.0: over-current change on port 4
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: RX authentication from 00:14:6c:3d:7c:d0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:6c:3d:7c:d0
>wlan0: RX AssocResp from 00:14:6c:3d:7c:d0 (capab=0x421 status=0 aid=19)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Loading R200 Microcode
>wlan0: No ProbeResp from current AP 00:14:6c:3d:7c:d0 - assume out of range
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: RX authentication from 00:14:6c:3d:7c:d0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:6c:3d:7c:d0
>wlan0: RX ReassocResp from 00:14:6c:3d:7c:d0 (capab=0x421 status=0 aid=19)
>wlan0: associated
>VFS: busy inodes on changed media.
>VFS: busy inodes on changed media.
>wlan0: no IPv6 routers present
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: disassociate(reason=3)
>wlan0: disassociate(reason=3)
>wlan0: authenticate with AP 00:14:6c:3d:7c:d0
>wlan0: RX authentication from 00:14:6c:3d:7c:d0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:14:6c:3d:7c:d0
>wlan0: RX AssocResp from 00:14:6c:3d:7c:d0 (capab=0x421 status=0 aid=19)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX AssocResp from 00:18:4d:8f:1d:14 (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: No ProbeResp from current AP 00:18:4d:8f:1d:14 - assume out of range
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:18:4d:8f:1d:14
>wlan0: RX authentication from 00:18:4d:8f:1d:14 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:18:4d:8f:1d:14
>wlan0: RX ReassocResp from 00:18:4d:8f:1d:14 (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: no IPv6 routers present
>wlan0: no IPv6 routers present
>wlan0: CTS protection enabled (BSSID=00:18:4d:8f:1d:14)
>BUG: unable to handle kernel paging request at virtual address 2d1354a8
>printing eip: c048a10e *pde = 00000000 
>Oops: 0002 [#1] SMP 
>Modules linked in: snd_rtctimer vfat fat nls_utf8 usb_storage rfcomm l2cap bluetooth autofs4 sunrpc nf_conntrack_ipv4 ipt_REJECT iptable_filter ip_tables nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables x_tables cpufreq_ondemand acpi_cpufreq fuse loop dm_multipath radeon drm ipv6 arc4 ecb blkcipher snd_intel8x0 snd_seq_dummy snd_intel8x0m snd_ac97_codec ac97_bus snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device nsc_ircc snd_pcm_oss irda snd_mixer_oss parport_pc snd_pcm crc_ccitt parport snd_timer snd pcspkr ath5k mac80211 floppy soundcore e1000 i2c_i801 snd_page_alloc cfg80211 iTCO_wdt iTCO_vendor_support battery ac video output button thinkpad_acpi hwmon sr_mod sg cdrom radeonfb fb_ddc i2c_algo_bit i2c_core dm_snapshot dm_zero dm_mirror dm_mod ata_piix ata_generic pata_acpi libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
>
>Pid: 2601, comm: X Not tainted (2.6.24.3-50.fc8 #1)
>EIP: 0060:[<c048a10e>] EFLAGS: 00013296 CPU: 0
>EIP is at fput+0x3/0x15
>EAX: 2d135494 EBX: e7b0b0cc ECX: 00003296 EDX: 2d135494
>ESI: f5e66bdc EDI: e7b0b000 EBP: 00000014 ESP: f5e66b78
> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
>Process X (pid: 2601, ti=f5e66000 task=f5c673b0 task.ti=f5e66000)
>Stack: c0493a15 00000000 f33a2c00 00000030 ffffffff c0494103 f5e66f9c f5e66f48 
>       00000000 00000030 f5e66eb0 f5e66ed0 f5e66ef0 f5e66e50 f5e66e70 f5e66e90 
>       0000f7ff 00000000 00000000 0000f7ff 00000000 00000000 00000000 00000000 
>Call Trace:
> [<c0493a15>] poll_freewait+0x2f/0x4c
> [<c0494103>] do_select+0x3a3/0x3c0
> [<c0494708>] __pollwait+0x0/0xac
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04943f2>] core_sys_select+0x2d2/0x2f3
> [<c043f0a1>] autoremove_wake_function+0x0/0x35
> [<c049488a>] sys_select+0xd6/0x188
> [<c04080dc>] do_syscall_trace+0xd7/0xde
> [<c04051da>] syscall_call+0x7/0xb
> =======================
>Code: 05 b8 01 00 00 00 a3 c0 10 72 c0 8b 04 24 89 ea 89 4c 24 20 89 f9 89 74 24 18 89 5c 24 1c 5b 5b 5e 5f 5d e9 f3 ac fa ff 89 c2 90 <ff> 48 14 0f 94 c0 84 c0 74 07 89 d0 e9 a4 fc ff ff c3 56 85 d2 
>EIP: [<c048a10e>] fput+0x3/0x15 SS:ESP 0068:f5e66b78
>---[ end trace f37e27ebcefcd591 ]---
>BUG: unable to handle kernel paging request at virtual address 34f8b7ed
>printing eip: 34f8b7ed *pde = 00000000 
>Oops: 0000 [#2] SMP 
>Modules linked in: snd_rtctimer vfat fat nls_utf8 usb_storage rfcomm l2cap bluetooth autofs4 sunrpc nf_conntrack_ipv4 ipt_REJECT iptable_filter ip_tables nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables x_tables cpufreq_ondemand acpi_cpufreq fuse loop dm_multipath radeon drm ipv6 arc4 ecb blkcipher snd_intel8x0 snd_seq_dummy snd_intel8x0m snd_ac97_codec ac97_bus snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device nsc_ircc snd_pcm_oss irda snd_mixer_oss parport_pc snd_pcm crc_ccitt parport snd_timer snd pcspkr ath5k mac80211 floppy soundcore e1000 i2c_i801 snd_page_alloc cfg80211 iTCO_wdt iTCO_vendor_support battery ac video output button thinkpad_acpi hwmon sr_mod sg cdrom radeonfb fb_ddc i2c_algo_bit i2c_core dm_snapshot dm_zero dm_mirror dm_mod ata_piix ata_generic pata_acpi libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
>
>Pid: 2831, comm: /usr/bin/sealer Tainted: G      D (2.6.24.3-50.fc8 #1)
>EIP: 0060:[<34f8b7ed>] EFLAGS: 00210097 CPU: 0
>EIP is at 0x34f8b7ed
>EAX: e7b0b0b4 EBX: e7b0b0b4 ECX: 00000000 EDX: 00000001
>ESI: a4e45e6e EDI: 00000000 EBP: aa7df2a5 ESP: ef16fe94
> DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
>Process /usr/bin/sealer (pid: 2831, ti=ef16f000 task=f33b6690 task.ti=ef16f000)
>Stack: c0424818 00000000 00000001 f461bd98 f461bd98 00000000 00000000 00200296 
>       c0426801 00000000 00000000 00000001 f461bd98 ef302e00 ef302380 00000000 
>       c05bfa04 00000000 ef302e00 00000000 c06224e0 00000000 00000000 015bca6a 
>Call Trace:
> [<c0424818>] __wake_up_common+0x32/0x5c
> [<c0426801>] __wake_up+0x32/0x42
> [<c05bfa04>] sock_def_wakeup+0x36/0x41
> [<c06224e0>] unix_release_sock+0x104/0x1c3
> [<c05bd735>] sock_release+0x14/0x5f
> [<c05bdb8b>] sock_close+0x2a/0x2f
> [<c0489e77>] __fput+0xb4/0x16c
> [<c04876af>] filp_close+0x51/0x58
> [<c04308f2>] put_files_struct+0x60/0xa8
> [<c0431a98>] do_exit+0x22a/0x695
> [<c0431f79>] sys_exit_group+0x0/0xd
> [<c04051da>] syscall_call+0x7/0xb
> [<c0620000>] xfrm_add_acquire+0x1b5/0x1bc
> =======================
>Code:  Bad EIP value.
>EIP: [<34f8b7ed>] 0x34f8b7ed SS:ESP 0068:ef16fe94
>---[ end trace f37e27ebcefcd591 ]---
>Fixing recursive fault but reboot is needed!
>BUG: unable to handle kernel paging request at virtual address 96d8f10c
>printing eip: 96d8f10c *pde = 00000000 
>Oops: 0000 [#3] SMP 
>Modules linked in: snd_rtctimer vfat fat nls_utf8 usb_storage rfcomm l2cap bluetooth autofs4 sunrpc nf_conntrack_ipv4 ipt_REJECT iptable_filter ip_tables nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables x_tables cpufreq_ondemand acpi_cpufreq fuse loop dm_multipath radeon drm ipv6 arc4 ecb blkcipher snd_intel8x0 snd_seq_dummy snd_intel8x0m snd_ac97_codec ac97_bus snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device nsc_ircc snd_pcm_oss irda snd_mixer_oss parport_pc snd_pcm crc_ccitt parport snd_timer snd pcspkr ath5k mac80211 floppy soundcore e1000 i2c_i801 snd_page_alloc cfg80211 iTCO_wdt iTCO_vendor_support battery ac video output button thinkpad_acpi hwmon sr_mod sg cdrom radeonfb fb_ddc i2c_algo_bit i2c_core dm_snapshot dm_zero dm_mirror dm_mod ata_piix ata_generic pata_acpi libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
>
>Pid: 2829, comm: gnome-power-man Tainted: G      D (2.6.24.3-50.fc8 #1)
>EIP: 0060:[<96d8f10c>] EFLAGS: 00210097 CPU: 0
>EIP is at 0x96d8f10c
>EAX: e7b0b044 EBX: e7b0b044 ECX: 00000000 EDX: 00000001
>ESI: 61a890d4 EDI: 00000000 EBP: e3cd49ff ESP: ef09ae94
> DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
>Process gnome-power-man (pid: 2829, ti=ef09a000 task=ef244690 task.ti=ef09a000)
>Stack: c0424818 00000000 00000001 f4596d98 f4596d98 00000000 00000000 00200296 
>       c0426801 00000000 00000000 00000001 f4596d98 f33db380 f33db1c0 00000000 
>       c05bfa04 00000000 f33db380 00000000 c06224e0 00000000 00000000 015bca6a 
>Call Trace:
> [<c0424818>] __wake_up_common+0x32/0x5c
> [<c0426801>] __wake_up+0x32/0x42
> [<c05bfa04>] sock_def_wakeup+0x36/0x41
> [<c06224e0>] unix_release_sock+0x104/0x1c3
> [<c05bd735>] sock_release+0x14/0x5f
> [<c05bdb8b>] sock_close+0x2a/0x2f
> [<c0489e77>] __fput+0xb4/0x16c
> [<c04876af>] filp_close+0x51/0x58
> [<c04308f2>] put_files_struct+0x60/0xa8
> [<c0431a98>] do_exit+0x22a/0x695
> [<c0431f79>] sys_exit_group+0x0/0xd
> [<c04051da>] syscall_call+0x7/0xb
> =======================
>Code:  Bad EIP value.
>EIP: [<96d8f10c>] 0x96d8f10c SS:ESP 0068:ef09ae94
>---[ end trace f37e27ebcefcd591 ]---
>Fixing recursive fault but reboot is needed!
>BUG: unable to handle kernel paging request at virtual address 4b9608f9
>printing eip: 4b9608f9 *pde = 00000000 
>Oops: 0000 [#4] SMP 
>Modules linked in: snd_rtctimer vfat fat nls_utf8 usb_storage rfcomm l2cap bluetooth autofs4 sunrpc nf_conntrack_ipv4 ipt_REJECT iptable_filter ip_tables nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables x_tables cpufreq_ondemand acpi_cpufreq fuse loop dm_multipath radeon drm ipv6 arc4 ecb blkcipher snd_intel8x0 snd_seq_dummy snd_intel8x0m snd_ac97_codec ac97_bus snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device nsc_ircc snd_pcm_oss irda snd_mixer_oss parport_pc snd_pcm crc_ccitt parport snd_timer snd pcspkr ath5k mac80211 floppy soundcore e1000 i2c_i801 snd_page_alloc cfg80211 iTCO_wdt iTCO_vendor_support battery ac video output button thinkpad_acpi hwmon sr_mod sg cdrom radeonfb fb_ddc i2c_algo_bit i2c_core dm_snapshot dm_zero dm_mirror dm_mod ata_piix ata_generic pata_acpi libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
>
>Pid: 2812, comm: nm-applet Tainted: G      D (2.6.24.3-50.fc8 #1)
>EIP: 0060:[<4b9608f9>] EFLAGS: 00010097 CPU: 0
>EIP is at 0x4b9608f9
>EAX: e7b0b07c EBX: e7b0b07c ECX: 00000000 EDX: 00000001
>ESI: 87d109f1 EDI: 00000000 EBP: 9a76dc49 ESP: ef1cae94
> DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
>Process nm-applet (pid: 2812, ti=ef1ca000 task=ef142d20 task.ti=ef1ca000)
>Stack: c0424818 00000000 00000001 f45b1018 f45b1018 00000000 00000000 00000296 
>       c0426801 00000000 00000000 00000001 f45b1018 ef1b71c0 ef1b7000 00000000 
>       c05bfa04 00000000 ef1b71c0 00000000 c06224e0 00000000 00000000 015bca6a 
>Call Trace:
> [<c0424818>] __wake_up_common+0x32/0x5c
> [<c0426801>] __wake_up+0x32/0x42
> [<c05bfa04>] sock_def_wakeup+0x36/0x41
> [<c06224e0>] unix_release_sock+0x104/0x1c3
> [<c05bd735>] sock_release+0x14/0x5f
> [<c05bdb8b>] sock_close+0x2a/0x2f
> [<c0489e77>] __fput+0xb4/0x16c
> [<c04876af>] filp_close+0x51/0x58
> [<c04308f2>] put_files_struct+0x60/0xa8
> [<c0431a98>] do_exit+0x22a/0x695
> [<c0431f79>] sys_exit_group+0x0/0xd
> [<c04051da>] syscall_call+0x7/0xb
> =======================
>Code:  Bad EIP value.
>EIP: [<4b9608f9>] 0x4b9608f9 SS:ESP 0068:ef1cae94
>---[ end trace f37e27ebcefcd591 ]---
>Fixing recursive fault but reboot is needed!
>BUG: unable to handle kernel paging request at virtual address 7eef0bbb
>printing eip: 7eef0bbb *pde = 00000000 
>Oops: 0000 [#5] SMP 
>Modules linked in: snd_rtctimer vfat fat nls_utf8 usb_storage rfcomm l2cap bluetooth autofs4 sunrpc nf_conntrack_ipv4 ipt_REJECT iptable_filter ip_tables nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables x_tables cpufreq_ondemand acpi_cpufreq fuse loop dm_multipath radeon drm ipv6 arc4 ecb blkcipher snd_intel8x0 snd_seq_dummy snd_intel8x0m snd_ac97_codec ac97_bus snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device nsc_ircc snd_pcm_oss irda snd_mixer_oss parport_pc snd_pcm crc_ccitt parport snd_timer snd pcspkr ath5k mac80211 floppy soundcore e1000 i2c_i801 snd_page_alloc cfg80211 iTCO_wdt iTCO_vendor_support battery ac video output button thinkpad_acpi hwmon sr_mod sg cdrom radeonfb fb_ddc i2c_algo_bit i2c_core dm_snapshot dm_zero dm_mirror dm_mod ata_piix ata_generic pata_acpi libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
>
>Pid: 2860, comm: trashapplet Tainted: G      D (2.6.24.3-50.fc8 #1)
>EIP: 0060:[<7eef0bbb>] EFLAGS: 00010083 CPU: 0
>EIP is at 0x7eef0bbb
>EAX: e7b0b060 EBX: e7b0b060 ECX: 00000000 EDX: 00000001
>ESI: 46dfe8a1 EDI: 00000000 EBP: 41af8f6f ESP: ef1d5e94
> DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
>Process trashapplet (pid: 2860, ti=ef1d5000 task=ef07ad20 task.ti=ef1d5000)
>Stack: c0424818 00000000 00000001 f45e9a98 f45e9a98 00000000 00000000 00000296 
>       c0426801 00000000 00000000 00000001 f45e9a98 ef131c40 ef131380 00000000 
>       c05bfa04 00000000 ef131c40 00000000 c06224e0 00000000 00000000 015bca6a 
>Call Trace:
> [<c0424818>] __wake_up_common+0x32/0x5c
> [<c0426801>] __wake_up+0x32/0x42
> [<c05bfa04>] sock_def_wakeup+0x36/0x41
> [<c06224e0>] unix_release_sock+0x104/0x1c3
> [<c05bd735>] sock_release+0x14/0x5f
> [<c05bdb8b>] sock_close+0x2a/0x2f
> [<c0489e77>] __fput+0xb4/0x16c
> [<c04876af>] filp_close+0x51/0x58
> [<c04308f2>] put_files_struct+0x60/0xa8
> [<c0431a98>] do_exit+0x22a/0x695
> [<c0431f79>] sys_exit_group+0x0/0xd
> [<c04051da>] syscall_call+0x7/0xb
> =======================
>Code:  Bad EIP value.
>EIP: [<7eef0bbb>] 0x7eef0bbb SS:ESP 0068:ef1d5e94
>---[ end trace f37e27ebcefcd591 ]---
>Fixing recursive fault but reboot is needed!
>BUG: unable to handle kernel paging request at virtual address 8f4d1800
>printing eip: 8f4d1800 *pde = 00000000 
>Oops: 0000 [#6] SMP 
>Modules linked in: snd_rtctimer vfat fat nls_utf8 usb_storage rfcomm l2cap bluetooth autofs4 sunrpc nf_conntrack_ipv4 ipt_REJECT iptable_filter ip_tables nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables x_tables cpufreq_ondemand acpi_cpufreq fuse loop dm_multipath radeon drm ipv6 arc4 ecb blkcipher snd_intel8x0 snd_seq_dummy snd_intel8x0m snd_ac97_codec ac97_bus snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device nsc_ircc snd_pcm_oss irda snd_mixer_oss parport_pc snd_pcm crc_ccitt parport snd_timer snd pcspkr ath5k mac80211 floppy soundcore e1000 i2c_i801 snd_page_alloc cfg80211 iTCO_wdt iTCO_vendor_support battery ac video output button thinkpad_acpi hwmon sr_mod sg cdrom radeonfb fb_ddc i2c_algo_bit i2c_core dm_snapshot dm_zero dm_mirror dm_mod ata_piix ata_generic pata_acpi libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
>
>Pid: 2819, comm: pam-panel-icon Tainted: G      D (2.6.24.3-50.fc8 #1)
>EIP: 0060:[<8f4d1800>] EFLAGS: 00010093 CPU: 0
>EIP is at 0x8f4d1800
>EAX: e7b0b028 EBX: e7b0b028 ECX: 00000000 EDX: 00000001
>ESI: a6101411 EDI: 00000000 EBP: 1800cb2d ESP: ef0fbd98
> DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
>Process pam-panel-icon (pid: 2819, ti=ef0fb000 task=ef2453b0 task.ti=ef0fb000)
>Stack: c0424818 00000000 00000001 f45aea98 f45aea98 00000000 00000000 00000292 
>       c0426801 00000000 00000000 00000001 f45aea98 ef16cc40 ef16c000 00000000 
>       c05bfa04 00000000 ef16cc40 00000000 c06224e0 00000000 00000000 015bca6a 
>Call Trace:
> [<c0424818>] __wake_up_common+0x32/0x5c
> [<c0426801>] __wake_up+0x32/0x42
> [<c05bfa04>] sock_def_wakeup+0x36/0x41
> [<c06224e0>] unix_release_sock+0x104/0x1c3
> [<c05bd735>] sock_release+0x14/0x5f
> [<c05bdb8b>] sock_close+0x2a/0x2f
> [<c0489e77>] __fput+0xb4/0x16c
> [<c04876af>] filp_close+0x51/0x58
> [<c04308f2>] put_files_struct+0x60/0xa8
> [<c0431a98>] do_exit+0x22a/0x695
> [<c0431f79>] sys_exit_group+0x0/0xd
> [<c0438a2b>] get_signal_to_deliver+0x39b/0x3c8
> [<c040474a>] do_notify_resume+0x8c/0x6c8
> [<c045e06a>] audit_syscall_exit+0x2c7/0x2e3
> [<c045dd79>] audit_syscall_entry+0x10d/0x137
> [<c0408050>] do_syscall_trace+0x4b/0xde
> [<c04946d5>] sys_poll+0x3a/0x6d
> [<c04052ae>] work_notifysig+0x13/0x19
> =======================
>Code:  Bad EIP value.
>EIP: [<8f4d1800>] 0x8f4d1800 SS:ESP 0068:ef0fbd98
>---[ end trace f37e27ebcefcd591 ]---
>Fixing recursive fault but reboot is needed!
>yafc[5429]: segfault at 534602bb eip 0805e1dd esp bfb019c0 error 4
>BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
>printing eip: cbb35b90 *pde = 3831e067 
>Oops: 0000 [#7] SMP 
>Modules linked in: snd_rtctimer vfat fat nls_utf8 usb_storage rfcomm l2cap bluetooth autofs4 sunrpc nf_conntrack_ipv4 ipt_REJECT iptable_filter ip_tables nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables x_tables cpufreq_ondemand acpi_cpufreq fuse loop dm_multipath radeon drm ipv6 arc4 ecb blkcipher snd_intel8x0 snd_seq_dummy snd_intel8x0m snd_ac97_codec ac97_bus snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device nsc_ircc snd_pcm_oss irda snd_mixer_oss parport_pc snd_pcm crc_ccitt parport snd_timer snd pcspkr ath5k mac80211 floppy soundcore e1000 i2c_i801 snd_page_alloc cfg80211 iTCO_wdt iTCO_vendor_support battery ac video output button thinkpad_acpi hwmon sr_mod sg cdrom radeonfb fb_ddc i2c_algo_bit i2c_core dm_snapshot dm_zero dm_mirror dm_mod ata_piix ata_generic pata_acpi libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
>
>Pid: 2853, comm: wnck-applet Tainted: G      D (2.6.24.3-50.fc8 #1)
>EIP: 0060:[<cbb35b90>] EFLAGS: 00210082 CPU: 0
>EIP is at 0xcbb35b90
>EAX: e7b0b0a8 EBX: e7b0b098 ECX: 00000000 EDX: c0424818
>ESI: 5922fd9b EDI: 00000000 EBP: c28fc518 ESP: ef0c8e98
> DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
>Process wnck-applet (pid: 2853, ti=ef0c8000 task=ef142000 task.ti=ef0c8000)
>Stack: 00000000 00000001 f45f4318 f45f4318 00000000 00000000 00200296 c0426801 
>       00000000 00000000 00000001 f45f4318 ef2d7380 ef2d71c0 00000000 c05bfa04 
>       00000000 ef2d7380 00000000 c06224e0 00000000 00000000 015bca6a 00000000 
>Call Trace:
> [<c0426801>] __wake_up+0x32/0x42
> [<c05bfa04>] sock_def_wakeup+0x36/0x41
> [<c06224e0>] unix_release_sock+0x104/0x1c3
> [<c05bd735>] sock_release+0x14/0x5f
> [<c05bdb8b>] sock_close+0x2a/0x2f
> [<c0489e77>] __fput+0xb4/0x16c
> [<c04876af>] filp_close+0x51/0x58
> [<c04308f2>] put_files_struct+0x60/0xa8
> [<c0431a98>] do_exit+0x22a/0x695
> [<c0431f79>] sys_exit_group+0x0/0xd
> [<c04051da>] syscall_call+0x7/0xb
> [<c0620000>] xfrm_add_acquire+0x1b5/0x1bc
> =======================
>Code: 00 00 00 03 bd 03 01 04 04 03 9a 7d 90 03 10 e4 04 07 03 92 01 ba 04 08 03 98 01 02 55 01 03 c5 7d 08 4a 04 04 08 9c 75 5a 04 08 <03> 19 08 20 2f 3d 03 f7 00 58 04 09 03 a0 03 82 04 0a 03 cb 7b 
>EIP: [<cbb35b90>] 0xcbb35b90 SS:ESP 0068:ef0c8e98
>---[ end trace f37e27ebcefcd591 ]---
>Fixing recursive fault but reboot is needed!
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Setting GART location based on new memory map
>[drm] Loading R200 Microcode
>[drm] writeback test succeeded in 2 usecs
>BUG: unable to handle kernel paging request at virtual address 6e3c206d
>printing eip: c0475f27 *pde = 00000000 
>Oops: 0002 [#8] SMP 
>Modules linked in: snd_rtctimer vfat fat nls_utf8 usb_storage rfcomm l2cap bluetooth autofs4 sunrpc nf_conntrack_ipv4 ipt_REJECT iptable_filter ip_tables nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables x_tables cpufreq_ondemand acpi_cpufreq fuse loop dm_multipath radeon drm ipv6 arc4 ecb blkcipher snd_intel8x0 snd_seq_dummy snd_intel8x0m snd_ac97_codec ac97_bus snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device nsc_ircc snd_pcm_oss irda snd_mixer_oss parport_pc snd_pcm crc_ccitt parport snd_timer snd pcspkr ath5k mac80211 floppy soundcore e1000 i2c_i801 snd_page_alloc cfg80211 iTCO_wdt iTCO_vendor_support battery ac video output button thinkpad_acpi hwmon sr_mod sg cdrom radeonfb fb_ddc i2c_algo_bit i2c_core dm_snapshot dm_zero dm_mirror dm_mod ata_piix ata_generic pata_acpi libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
>
>Pid: 7445, comm: pulseaudio Tainted: G      D (2.6.24.3-50.fc8 #1)
>EIP: 0060:[<c0475f27>] EFLAGS: 00210246 CPU: 0
>EIP is at copy_page_range+0x2b4/0x392
>EAX: 00024000 EBX: 8a8cc181 ECX: 6e3c2069 EDX: c2151980
>ESI: b700e000 EDI: ef3e0038 EBP: 8a8cc181 ESP: f5f98ed4
> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
>Process pulseaudio (pid: 7445, ti=f5f98000 task=f6ec8d20 task.ti=f5f98000)
>Stack: f5cddb58 ef27aa80 f5cd7380 ef05eb70 ef390b70 b71a6000 b71a6000 00000000 
>       c18096e0 00000018 c16bf3ac c15e7c0c f5f9d038 00000003 00000000 f70674d0 
>       00000000 f5cddb58 f7f36690 c042daa1 f7067540 f453fd70 f335d600 f5f98fb8 
>Call Trace:
> [<c042daa1>] copy_process+0xa5a/0x10eb
> [<c042e31c>] do_fork+0x29/0x198
> [<c0403232>] sys_clone+0x36/0x3b
> [<c04051da>] syscall_call+0x7/0xb
> [<c0620000>] xfrm_add_acquire+0x1b5/0x1bc
> =======================
>Code: 24 89 dd 89 f2 83 e5 df 89 e9 89 eb e8 c2 e2 ff ff 85 c0 89 c2 74 2c 8b 00 89 d1 25 00 40 02 00 3d 00 40 02 00 75 03 8b 4a 0c 90 <ff> 41 04 90 ff 42 08 8b 42 10 89 eb 83 e0 01 f7 d8 83 e0 04 ff 
>EIP: [<c0475f27>] copy_page_range+0x2b4/0x392 SS:ESP 0068:f5f98ed4
>---[ end trace f37e27ebcefcd591 ]---
>note: pulseaudio[7445] exited with preempt_count 2
>BUG: scheduling while atomic: pulseaudio/7445/0x00000002
>Pid: 7445, comm: pulseaudio Tainted: G      D 2.6.24.3-50.fc8 #1
> [<c062aa4f>] schedule+0x74/0x663
> [<c04ff092>] vsnprintf+0x449/0x485
> [<c055aed7>] vt_console_print+0x0/0x253
> [<c062bfe8>] rwsem_down_failed_common+0x13a/0x155
> [<c062c03c>] rwsem_down_read_failed+0x1a/0x22
> [<c062c0a7>] call_rwsem_down_read_failed+0x7/0xc
> [<c062b81e>] down_read+0x23/0x25
> [<c04481a8>] futex_wake+0x19/0xb0
> [<c0448e14>] do_futex+0x7c/0x963
> [<c04ff092>] vsnprintf+0x449/0x485
> [<c055aed7>] vt_console_print+0x0/0x253
> [<c042ee41>] __call_console_drivers+0x4f/0x5b
> [<c042f238>] release_console_sem+0x187/0x1a0
> [<c04497f9>] sys_futex+0xfe/0x111
> [<c042cf7a>] mm_release+0x81/0x87
> [<c043071a>] exit_mm+0x12/0xdb
> [<c0431a81>] do_exit+0x213/0x695
> [<c0406785>] die+0x21d/0x224
> [<c062dea4>] do_page_fault+0x539/0x614
> [<c046d7c1>] __alloc_pages+0x70/0x2ec
> [<c062d96b>] do_page_fault+0x0/0x614
> [<c062c62a>] error_code+0x72/0x78
> [<c047007b>] rotate_reclaimable_page+0x50/0x93
> [<c047007b>] rotate_reclaimable_page+0x50/0x93
> [<c0475f27>] copy_page_range+0x2b4/0x392
> [<c042daa1>] copy_process+0xa5a/0x10eb
> [<c042e31c>] do_fork+0x29/0x198
> [<c0403232>] sys_clone+0x36/0x3b
> [<c04051da>] syscall_call+0x7/0xb
> [<c0620000>] xfrm_add_acquire+0x1b5/0x1bc
> =======================
>BUG: unable to handle kernel NULL pointer dereference at virtual address 00000186
>printing eip: c062c346 *pde = 3fb8d067 
>Oops: 0002 [#9] SMP 
>Modules linked in: snd_rtctimer vfat fat nls_utf8 usb_storage rfcomm l2cap bluetooth autofs4 sunrpc nf_conntrack_ipv4 ipt_REJECT iptable_filter ip_tables nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables x_tables cpufreq_ondemand acpi_cpufreq fuse loop dm_multipath radeon drm ipv6 arc4 ecb blkcipher snd_intel8x0 snd_seq_dummy snd_intel8x0m snd_ac97_codec ac97_bus snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device nsc_ircc snd_pcm_oss irda snd_mixer_oss parport_pc snd_pcm crc_ccitt parport snd_timer snd pcspkr ath5k mac80211 floppy soundcore e1000 i2c_i801 snd_page_alloc cfg80211 iTCO_wdt iTCO_vendor_support battery ac video output button thinkpad_acpi hwmon sr_mod sg cdrom radeonfb fb_ddc i2c_algo_bit i2c_core dm_snapshot dm_zero dm_mirror dm_mod ata_piix ata_generic pata_acpi libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
>
>Pid: 1965, comm: dbus-daemon Tainted: G      D (2.6.24.3-50.fc8 #1)
>EIP: 0060:[<c062c346>] EFLAGS: 00210096 CPU: 0
>EIP is at _spin_lock_irqsave+0x19/0x4e
>EAX: 00200296 EBX: e7a0c028 ECX: 00200296 EDX: 00000186
>ESI: f6fe0c4c EDI: 00000186 EBP: 00000014 ESP: f6fe0c08
> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
>Process dbus-daemon (pid: 1965, ti=f6fe0000 task=f6d253b0 task.ti=f6fe0000)
>Stack: c043f23a e7a0c024 f6fe0c4c e7a0c000 c04939de e7a0c024 c0493a15 00000000 
>       f6fe0f44 ef3b4000 00000000 c0493c92 f6fe0fa4 bfa294b0 00000001 f6fe0f44 
>       00000000 c0494708 e7a0c000 00000000 00000014 f6fe7600 00000000 f6d253b0 
>Call Trace:
> [<c043f23a>] remove_wait_queue+0xc/0x22
> [<c04939de>] free_poll_entry+0xe/0x16
> [<c0493a15>] poll_freewait+0x2f/0x4c
> [<c0493c92>] do_sys_poll+0x260/0x2e0
> [<c0494708>] __pollwait+0x0/0xac
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c04287e8>] default_wake_function+0x0/0x8
> [<c045e06a>] audit_syscall_exit+0x2c7/0x2e3
> [<c045dd79>] audit_syscall_entry+0x10d/0x137
> [<c04946d5>] sys_poll+0x3a/0x6d
> [<c04051da>] syscall_call+0x7/0xb
> =======================
>Code: 24 e9 ec 70 e0 ff b2 01 86 10 8b 04 24 e9 e0 70 e0 ff 89 c2 9c 58 0f 1f 84 00 00 00 00 00 89 c1 fa 0f 1f 84 00 00 00 00 00 90 90 <fe> 0a 79 2e f7 c1 00 02 00 00 74 1d fb 0f 1f 84 00 00 00 00 00 
>EIP: [<c062c346>] _spin_lock_irqsave+0x19/0x4e SS:ESP 0068:f6fe0c08
>---[ end trace f37e27ebcefcd591 ]---

Actions: View

Attachments on bug 440180: 300007 | 300152 | 301391 | 302964