Attachment 300013 Details for Bug 440189 – dmesg

dmesg

dmesg-2.6.25-0.172.rc7.git4.fc9.i686 (text/plain), 44.96 KB, created by dex on 2008-04-02 06:09:21 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: dex

Created: 2008-04-02 06:09:21 UTC

Size: 44.96 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-0.172.rc7.git4.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080326 (Red Hat 4.3.0-5) (GCC) ) #1 SMP Fri Mar 28 21:46:59 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
> BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>Scan SMP from c009cc00 for 1024 bytes.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 262128) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262128
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   262128
>On node 0 totalpages: 262128
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4040 pages, LIFO batch:0
>  Normal zone: 3080 pages used for memmap
>  Normal zone: 222200 pages, LIFO batch:31
>  HighMem zone: 447 pages used for memmap
>  HighMem zone: 32305 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F73D0, 0014 (r0 Nvidia)
>ACPI: RSDT 3FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 3FFF30C0, 46F8 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 3FFF0000, 0040
>ACPI: APIC 3FFF77C0, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:10 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:c0000000)
>PM: Registered nosave memory: 000000000009c000 - 000000000009d000
>PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258545
>Kernel command line: ro root=LABEL=/1 
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0821000 soft=c0801000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2035.475 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1024 kB
> per task-struct memory footprint: 2688 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1022552k/1048512k available (2310k kernel code, 25172k reserved, 1184k data, 572k init, 131008k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc076f000 - 0xc07fe000   ( 572 kB)
>      .data : 0xc0641951 - 0xc07699f0   (1184 kB)
>      .text : 0xc0400000 - 0xc0641951   (2310 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 4074.87 BogoMIPS (lpj=2037435)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20070126
>CPU0: AMD Athlon(tm) XP 2500+ stepping 00
>Total of 1 processors activated (4074.87 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=608 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=860 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=6560 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>khelper used greatest stack depth: 3032 bytes left
>net_namespace: 620 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 17:26:19  Date: 04/01/08
>NET: Registered protocol family 16
>khelper used greatest stack depth: 2972 bytes left
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfbbb0, last bus=3
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LAPU] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs *18)
>ACPI: PCI Interrupt Link [APC4] (IRQs *19)
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs *23)
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>system 00:00: ioport range 0x4000-0x407f has been reserved
>system 00:00: ioport range 0x4080-0x40ff has been reserved
>system 00:00: ioport range 0x4400-0x447f has been reserved
>system 00:00: ioport range 0x4480-0x44ff has been reserved
>system 00:00: ioport range 0x4200-0x427f has been reserved
>system 00:00: ioport range 0x4280-0x42ff has been reserved
>system 00:01: ioport range 0x5000-0x503f has been reserved
>system 00:01: ioport range 0x5040-0x507f has been reserved
>system 00:02: iomem range 0xd9400-0xdbfff has been reserved
>system 00:02: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:02: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:02: iomem range 0xfc000-0xfffff could not be reserved
>system 00:02: iomem range 0x3fff0000-0x3fffffff could not be reserved
>system 00:02: iomem range 0xffff0000-0xffffffff has been reserved
>system 00:02: iomem range 0x0-0x9ffff could not be reserved
>system 00:02: iomem range 0x100000-0x3ffeffff could not be reserved
>system 00:02: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:04: ioport range 0xb78-0xb7b has been reserved
>system 00:04: ioport range 0xf78-0xf7b has been reserved
>system 00:04: ioport range 0xa78-0xa7b has been reserved
>system 00:04: ioport range 0xe78-0xe7b has been reserved
>system 00:04: ioport range 0xbbc-0xbbf has been reserved
>system 00:04: ioport range 0xfbc-0xfbf has been reserved
>system 00:04: ioport range 0x4d0-0x4d1 has been reserved
>system 00:04: ioport range 0x294-0x297 has been reserved
>PCI: Bridge: 0000:00:08.0
>  IO window: 9000-9fff
>  MEM window: 0xe3000000-0xe3ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: b000-bfff
>  MEM window: 0xe1000000-0xe2ffffff
>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2638k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1207070779.837:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>khelper used greatest stack depth: 2944 bytes left
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:03:00.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: PNP0C0B:00 is registered as cooling_device0
>ACPI: Fan [FAN] (on)
>ACPI: ACPI0007:00 is registered as cooling_device1
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (43 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>khelper used greatest stack depth: 2840 bytes left
>agpgart: Detected NVIDIA nForce2 chipset
>agpgart: AGP aperture is 256M @ 0xc0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 4:239:440
>Freeing unused kernel memory: 572k freed
>Write protecting the kernel read-only data: 948k
>ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:02.2 to 64
>ehci_hcd 0000:00:02.2: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.2: reset hcs_params 0x102486 dbg=1 cc=2 pcc=4 !ppc ports=6
>ehci_hcd 0000:00:02.2: reset portroute 0 0 1 1 1 0 
>ehci_hcd 0000:00:02.2: reset hcc_params a086 caching frame 256/512/1024 park
>ehci_hcd 0000:00:02.2: park 0
>ehci_hcd 0000:00:02.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:02.2: selective suspend/wakeup unavailable
>ehci_hcd 0000:00:02.2: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.2
>ehci_hcd 0000:00:02.2: supports USB remote wakeup
>ehci_hcd 0000:00:02.2: irq 22, io mem 0xe4082000
>ehci_hcd 0000:00:02.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:02.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: default language 0x0409
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: Single TT
>hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.172.rc7.git4.fc9.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:02.2
>modprobe used greatest stack depth: 1880 bytes left
>hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
>ehci_hcd 0000:00:02.2: GetStatus port 5 status 001403 POWER sig=k CSC CONNECT
>hub 1-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 64 td 64
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: created debug files
>ohci_hcd 0000:00:02.0: irq 21, io mem 0xe4084000
>ohci_hcd 0000:00:02.0: OHCI controller state
>ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
>ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
>ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
>ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH
>ohci_hcd 0000:00:02.0: hcca frame #0003
>ohci_hcd 0000:00:02.0: roothub.a 01000203 POTPGT=1 NPS NDP=3(3)
>ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
>ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
>usb usb2: default language 0x0409
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: global over-current protection
>hub 2-0:1.0: power on to power good time: 2ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: no over-current condition exists
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501
>ehci_hcd 0000:00:02.2: port 5 low speed --> companion
>ehci_hcd 0000:00:02.2: GetStatus port 5 status 003402 POWER OWNER sig=k CSC
>ehci_hcd 0000:00:02.2: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
>drivers/usb/core/inode.c: creating file '001'
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-0.172.rc7.git4.fc9.i686 ohci_hcd
>usb usb2: SerialNumber: 0000:00:02.0
>ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ohci_hcd 0000:00:02.1: OHCI Host Controller
>drivers/usb/core/inode.c: creating file '003'
>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:02.1: created debug files
>ohci_hcd 0000:00:02.1: irq 20, io mem 0xe4081000
>ohci_hcd 0000:00:02.1: OHCI controller state
>ohci_hcd 0000:00:02.1: OHCI 1.0, NO legacy support registers
>ohci_hcd 0000:00:02.1: control 0x683 RWE RWC HCFS=operational CBSR=3
>ohci_hcd 0000:00:02.1: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:00:02.1: intrstatus 0x00000004 SF
>ohci_hcd 0000:00:02.1: intrenable 0x8000004a MIE RHSC RD WDH
>ohci_hcd 0000:00:02.1: hcca frame #0003
>ohci_hcd 0000:00:02.1: roothub.a 01000203 POTPGT=1 NPS NDP=3(3)
>ohci_hcd 0000:00:02.1: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:00:02.1: roothub.status 00008000 DRWE
>ohci_hcd 0000:00:02.1: roothub.portstatus [0] 0x00000100 PPS
>ohci_hcd 0000:00:02.1: roothub.portstatus [1] 0x00000100 PPS
>ohci_hcd 0000:00:02.1: roothub.portstatus [2] 0x00000100 PPS
>usb usb3: default language 0x0409
>usb usb3: uevent
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>usb 3-0:1.0: uevent
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: global over-current protection
>hub 3-0:1.0: power on to power good time: 2ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: no over-current condition exists
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
>ehci_hcd 0000:00:02.2: port 6 full speed --> companion
>ehci_hcd 0000:00:02.2: GetStatus port 6 status 003001 POWER OWNER sig=se0 CONNECT
>hub 1-0:1.0: port 6 not reset yet, waiting 50ms
>drivers/usb/core/inode.c: creating file '001'
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-0.172.rc7.git4.fc9.i686 ohci_hcd
>usb usb3: SerialNumber: 0000:00:02.1
>USB Universal Host Controller Interface driver v3.0
>ehci_hcd 0000:00:02.2: GetStatus port 6 status 003802 POWER OWNER sig=j CSC
>hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
>hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0008
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS
>hub 2-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>hub 2-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
>usb 2-3: new low speed USB device using ohci_hcd and address 2
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
>usb 2-3: skipped 1 descriptor after interface
>usb 2-3: skipped 1 descriptor after interface
>usb 2-3: skipped 1 descriptor after interface
>usb 2-3: default language 0x0409
>usb 2-3: uevent
>usb 2-3: usb_probe_device
>usb 2-3: configuration #1 chosen from 1 choice
>usb 2-3: adding 2-3:1.0 (config #1, interface 0)
>usb 2-3:1.0: uevent
>usbhid 2-3:1.0: usb_probe_interface
>usbhid 2-3:1.0: usb_probe_interface - got id
>input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1
>input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Cordless Kit] on usb-0000:00:02.0-3
>usb 2-3: adding 2-3:1.1 (config #1, interface 1)
>usb 2-3:1.1: uevent
>usbhid 2-3:1.1: usb_probe_interface
>usbhid 2-3:1.1: usb_probe_interface - got id
>input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input2
>input,hidraw1: USB HID v1.10 Mouse [BTC USB Multimedia Cordless Kit] on usb-0000:00:02.0-3
>usb 2-3: adding 2-3:1.2 (config #1, interface 2)
>usb 2-3:1.2: uevent
>usbhid 2-3:1.2: usb_probe_interface
>usbhid 2-3:1.2: usb_probe_interface - got id
>input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.2/input/input3
>input,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Cordless Kit] on usb-0000:00:02.0-3
>drivers/usb/core/inode.c: creating file '002'
>usb 2-3: New USB device found, idVendor=046e, idProduct=5520
>usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-3: Product: USB Multimedia Cordless Kit
>usb 2-3: Manufacturer: BTC
>hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0008
>ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [2] = 0x00010101 CSC PPS CCS
>hub 3-0:1.0: port 3, status 0101, change 0001, 12 Mb/s
>hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
>ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS
>usb 3-3: new full speed USB device using ohci_hcd and address 2
>ohci_hcd 0000:00:02.1: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS
>usb 3-3: ep0 maxpacket = 8
>usb 3-3: default language 0x0409
>usb 3-3: uevent
>usb 3-3: usb_probe_device
>usb 3-3: configuration #1 chosen from 1 choice
>usb 3-3: adding 3-3:1.0 (config #1, interface 0)
>usb 3-3:1.0: uevent
>hub 3-3:1.0: usb_probe_interface
>hub 3-3:1.0: usb_probe_interface - got id
>hub 3-3:1.0: USB hub found
>hub 3-3:1.0: 4 ports detected
>hub 3-3:1.0: standalone hub
>hub 3-3:1.0: individual port power switching
>hub 3-3:1.0: individual port over-current protection
>hub 3-3:1.0: power on to power good time: 44ms
>hub 3-3:1.0: local power source is good
>hub 3-3:1.0: enabling power on all ports
>drivers/usb/core/inode.c: creating file '002'
>usb 3-3: New USB device found, idVendor=058f, idProduct=9254
>usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-3: Product: Generic USB Hub
>usb 3-3: Manufacturer: ALCOR
>hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0008
>hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0008
>hub 3-3:1.0: state 7 ports 4 chg 0000 evt 0000
>hub 3-3:1.0: port 1, status 0101, change 0001, 12 Mb/s
>hub 3-3:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
>usb 3-3.1: new full speed USB device using ohci_hcd and address 3
>usb 3-3.1: ep0 maxpacket = 16
>usb 3-3.1: default language 0x0409
>usb 3-3.1: uevent
>usb 3-3.1: usb_probe_device
>usb 3-3.1: configuration #1 chosen from 1 choice
>usb 3-3.1: adding 3-3.1:1.0 (config #1, interface 0)
>usb 3-3.1:1.0: uevent
>drivers/usb/core/inode.c: creating file '003'
>usb 3-3.1: New USB device found, idVendor=15a4, idProduct=9020
>usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-3.1: Product: DVBT
>usb 3-3.1: Manufacturer: Afatech
>hub 3-3:1.0: state 7 ports 4 chg 0000 evt 0002
>hub 1-0:1.0: hub_suspend
>usb usb1: bus auto-suspend
>ehci_hcd 0000:00:02.2: suspend root hub
>pata_amd 0000:00:09.0: version 0.3.10
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>scsi0 : pata_amd
>scsi1 : pata_amd
>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>ata1.00: ATA-7: Maxtor 6Y060L0, YAR41VW0, max UDMA/133
>ata1.00: 120103200 sectors, multi 16: LBA 
>ata1.01: ATA-7: Maxtor 6L200P0, BAH41E00, max UDMA/133
>ata1.01: 398297088 sectors, multi 16: LBA48 
>ata1: nv_mode_filter: 0x7f39f&0x7f01f->0x7f01f, BIOS=0x7f000 (0xc7c7c5c0) ACPI=0x7f01f (15:15:0x1f)
>ata1: nv_mode_filter: 0x7f39f&0x7f01f->0x7f01f, BIOS=0x7f000 (0xc7c7c5c0) ACPI=0x7f01f (15:15:0x1f)
>ata1.00: configured for UDMA/133
>ata1.01: configured for UDMA/133
>ata2.00: ATAPI: LITE-ON DVDRW SOHW-1693S, KS0A, max UDMA/66
>ata2.01: ATAPI: JLMS XJ-HD166S, DS1E, max UDMA/33
>ata2: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc7c7c5c0) ACPI=0x1f01f (30:60:0x1f)
>ata2: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc7c7c5c0) ACPI=0x701f (30:60:0x1f)
>ata2.00: configured for UDMA/66
>ata2.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y060L0   YAR4 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 120103200 512-byte hardware sectors (61493 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 120103200 512-byte hardware sectors (61493 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: Direct-Access     ATA      Maxtor 6L200P0   BAH4 PQ: 0 ANSI: 5
>sd 0:0:1:0: [sdb] 398297088 512-byte hardware sectors (203928 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:1:0: [sdb] 398297088 512-byte hardware sectors (203928 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 >
>sd 0:0:1:0: [sdb] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            LITE-ON  DVDRW SOHW-1693S KS0A PQ: 0 ANSI: 5
>scsi 1:0:1:0: CD-ROM            JLMS     XJ-HD166S        DS1E PQ: 0 ANSI: 5
>modprobe used greatest stack depth: 1136 bytes left
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:8192 avtab hash slots allocated. Num of rules:157127
>SELinux:8192 avtab hash slots allocated. Num of rules:157127
>security:  5 users, 12 roles, 2150 types, 106 bools, 1 sens, 1024 cats
>security:  67 classes, 157127 rules
>security:  class peer not defined in policy
>security:  class capability2 not defined in policy
>security:  permission recvfrom in class node not defined in policy
>security:  permission sendto in class node not defined in policy
>security:  permission ingress in class netif not defined in policy
>security:  permission egress in class netif not defined in policy
>security:  permission setfcap in class capability not defined in policy
>security:  permission forward_in in class packet not defined in policy
>security:  permission forward_out in class packet not defined in policy
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sdb8, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1207070791.825:2): policy loaded auid=4294967295 ses=4294967295
>type=1400 audit(1207070792.126:3): avc:  denied  { setsched } for  pid=499 comm="init" scontext=system_u:system_r:init_t:s0 tcontext=system_u:system_r:init_t:s0 tclass=process
>usb usb2: uevent
>usb 2-0:1.0: uevent
>usb 2-3: uevent
>usb 2-3:1.0: uevent
>usb 2-3:1.1: uevent
>usb 2-3:1.2: uevent
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb 3-3: uevent
>usb 3-3.1: uevent
>usb 3-3.1:1.0: uevent
>usb 3-3:1.0: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
>sr 1:0:1:0: Attached scsi CD-ROM sr1
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>sr 1:0:0:0: Attached scsi generic sg2 type 5
>sr 1:0:1:0: Attached scsi generic sg3 type 5
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
>ACPI: Power Button (CM) [PWRB]
>dvb_usb_af9005 3-3.1:1.0: usb_probe_interface
>dvb_usb_af9005 3-3.1:1.0: usb_probe_interface - got id
>dvb-usb: found a 'Afatech DVB-T USB1.1 stick' in warm state.
>dvb-usb: will use the device's hardware PID filter (table count: 32).
>DVB: registering new adapter (Afatech DVB-T USB1.1 stick)
>DVB: registering frontend 0 (AF9005 USB DVB-T)...
>dvb-usb: Afatech DVB-T USB1.1 stick successfully initialized and connected.
>usbcore: registered new interface driver dvb_usb_af9005
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x57d @ 1, addr 02:00:66:06:17:91
>forcedeth 0000:00:04.0: timirq lnktim desc-v1
>sata_promise 0000:01:0b.0: version 2.12
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 18
>scsi2 : sata_promise
>scsi3 : sata_promise
>scsi4 : sata_promise
>ata3: SATA max UDMA/133 mmio m4096@0xe3020000 port 0xe3020200 irq 18
>ata4: SATA max UDMA/133 mmio m4096@0xe3020000 port 0xe3020280 irq 18
>ata5: PATA max UDMA/133 mmio m4096@0xe3020000 port 0xe3020300 irq 18
>type=1400 audit(1207070798.256:4): avc:  denied  { create } for  pid=954 comm="hwclock" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tclass=netlink_audit_socket
>type=1400 audit(1207070798.291:5): avc:  denied  { getattr } for  pid=954 comm="hwclock" path="/etc/adjtime" dev=sdb8 ino=2128802 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:adjtime_t:s0 tclass=file
>type=1400 audit(1207070798.291:6): avc:  denied  { read } for  pid=954 comm="hwclock" name="adjtime" dev=sdb8 ino=2128802 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:adjtime_t:s0 tclass=file
>type=1400 audit(1207070798.300:7): avc:  denied  { sys_time } for  pid=954 comm="hwclock" capability=25 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tclass=capability
>type=1400 audit(1207067197.714:8): avc:  denied  { write } for  pid=954 comm="hwclock" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tclass=netlink_audit_socket
>type=1400 audit(1207067197.714:9): avc:  denied  { nlmsg_relay } for  pid=954 comm="hwclock" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tclass=netlink_audit_socket
>type=1400 audit(1207067198.000:10): avc:  denied  { audit_write } for  pid=954 comm="hwclock" capability=29 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tclass=capability
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATA-7: Maxtor 6Y080M0, YAR51EW0, max UDMA/133
>ata3.00: 160086528 sectors, multi 0: LBA 
>type=1400 audit(1207067198.020:11): avc:  denied  { read } for  pid=954 comm="hwclock" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tclass=netlink_audit_socket
>ata3.00: configured for UDMA/133
>parport_pc 00:0b: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.00: ATA-7: Maxtor 6Y080M0, YAR51EW0, max UDMA/133
>ata4.00: 160086528 sectors, multi 0: LBA 
>ata4.00: configured for UDMA/133
>ata5.00: ATA-5: ST38410A, 3.07, max UDMA/66
>ata5.00: 16514064 sectors, multi 0: LBA 
>ata5.00: configured for UDMA/66
>scsi 2:0:0:0: Direct-Access     ATA      Maxtor 6Y080M0   YAR5 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdc] 160086528 512-byte hardware sectors (81964 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdc] 160086528 512-byte hardware sectors (81964 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
> sdc: p1 exceeds device capacity
>sd 2:0:0:0: [sdc] Attached SCSI disk
>sd 2:0:0:0: Attached scsi generic sg4 type 0
>scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6Y080M0   YAR5 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdd] 160086528 512-byte hardware sectors (81964 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdd] 160086528 512-byte hardware sectors (81964 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: unknown partition table
>sd 3:0:0:0: [sdd] Attached SCSI disk
>sd 3:0:0:0: Attached scsi generic sg5 type 0
>scsi 4:0:0:0: Direct-Access     ATA      ST38410A         3.07 PQ: 0 ANSI: 5
>sd 4:0:0:0: [sde] 16514064 512-byte hardware sectors (8455 MB)
>sd 4:0:0:0: [sde] Write Protect is off
>sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sde] 16514064 512-byte hardware sectors (8455 MB)
>sd 4:0:0:0: [sde] Write Protect is off
>sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sde: sde1
>sd 4:0:0:0: [sde] Attached SCSI disk
>sd 4:0:0:0: Attached scsi generic sg6 type 0
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>intel8x0_measure_ac97_clock: measured 50106 usecs
>intel8x0: clocking to 47468
>modprobe used greatest stack depth: 792 bytes left
>attempt to access beyond end of device
>sdc: rw=0, want=320159169, limit=160086528
>Buffer I/O error on device sdc1, logical block 160079552
>attempt to access beyond end of device
>sdc: rw=0, want=320159171, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159173, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159175, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159169, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159171, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159173, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159175, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159369, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159371, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159373, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159375, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159369, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159371, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159373, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159375, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159385, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159385, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159385, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159385, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159385, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159385, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159385, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159321, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159323, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159325, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159327, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159369, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159371, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159373, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159375, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159385, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159385, limit=160086528
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sdb8, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb7, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev sda5, type vfat), uses genfs_contexts
>SELinux: initialized (dev sdb6, type vfat), uses genfs_contexts
>SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
>SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
>Adding 1534168k swap on /dev/sdb5.  Priority:-1 extents:1 across:1534168k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>printk: 32 messages suppressed.
>type=1400 audit(1207067204.860:12): avc:  denied  { setsched } for  pid=1556 comm="init" scontext=system_u:system_r:init_t:s0 tcontext=system_u:system_r:init_t:s0 tclass=process
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>printk: 3 messages suppressed.
>type=1400 audit(1207067210.569:14): avc:  denied  { sendto } for  pid=1 comm="init" path=002F636F6D2F7562756E74752F757073746172742F31383836 scontext=system_u:system_r:init_t:s0 tcontext=system_u:system_r:initrc_t:s0 tclass=unix_dgram_socket
>w83627hf: Found W83627HF chip at 0x290
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>attempt to access beyond end of device
>sdc: rw=0, want=320159169, limit=160086528
>Buffer I/O error on device sdc1, logical block 160079552
>attempt to access beyond end of device
>sdc: rw=0, want=320159171, limit=160086528
>Buffer I/O error on device sdc1, logical block 160079553
>attempt to access beyond end of device
>sdc: rw=0, want=320159173, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159175, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159169, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159171, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159173, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159175, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159369, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159371, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159373, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159375, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159369, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159371, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159373, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159375, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159385, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159385, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159385, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159385, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159385, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159385, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159385, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159321, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159323, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159325, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159327, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159369, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159371, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159373, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159375, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159385, limit=160086528
>attempt to access beyond end of device
>sdc: rw=0, want=320159385, limit=160086528
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 19
>[drm] Initialized radeon 1.28.0 20060524 on minor 0
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:03:00.0 into 8x mode
>[drm] Setting GART location based on new memory map
>[drm] Loading R200 Microcode
>[drm] writeback test succeeded in 1 usecs

Actions: View

Attachments on bug 440189: 300013