Attachment 300024 Details for Bug 440203 – The output of lspci on the S6010 laptop

The output of lspci on the S6010 laptop

lspci.log (text/plain), 10.06 KB, created by Tomas Linden on 2008-04-02 09:07:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tomas Linden

Created: 2008-04-02 09:07:03 UTC

Size: 10.06 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04)
>	Subsystem: Fujitsu Limited. Unknown device 113b
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>	Latency: 0
>	Region 0: Memory at <unassigned> (32-bit, prefetchable)
>	Capabilities: [40] Vendor Specific Information <?>
>	Kernel driver in use: agpgart-intel
>
>00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04) (prog-if 00 [VGA controller])
>	Subsystem: Fujitsu Limited. Unknown device 113c
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
>	Region 1: Memory at e0080000 (32-bit, non-prefetchable) [size=512K]
>	Capabilities: [d0] Power Management version 1
>		Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel modules: i915, intelfb
>
>00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset Graphics Controller]
>	Subsystem: Fujitsu Limited. Unknown device 113c
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0 (2750ns max)
>	Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
>	Region 1: Memory at e0100000 (32-bit, non-prefetchable) [size=512K]
>	Capabilities: [d0] Power Management version 1
>		Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel modules: i915
>
>00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Fujitsu Limited. Unknown device 113d
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 11
>	Region 4: I/O ports at 18c0 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Fujitsu Limited. Unknown device 113d
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 11
>	Region 4: I/O ports at 18e0 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=01, subordinate=06, sec-latency=64
>	I/O behind bridge: 00008000-00008fff
>	Memory behind bridge: e0200000-e02fffff
>	Prefetchable memory behind bridge: e0300000-e03fffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
>00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Kernel modules: intel-rng, iTCO_wdt
>
>00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02) (prog-if 8a [Master SecP PriP])
>	Subsystem: Fujitsu Limited. Unknown device 113d
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 11
>	Region 0: I/O ports at 01f0 [size=8]
>	Region 1: I/O ports at 03f4 [size=1]
>	Region 2: I/O ports at 0170 [size=8]
>	Region 3: I/O ports at 0374 [size=1]
>	Region 4: I/O ports at 1c20 [size=16]
>	Region 5: Memory at e0000000 (32-bit, non-prefetchable) [size=1K]
>	Kernel driver in use: ata_piix
>	Kernel modules: ata_piix
>
>00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
>	Subsystem: Fujitsu Limited. Unknown device 113d
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin B routed to IRQ 11
>	Region 4: I/O ports at 1c00 [size=32]
>	Kernel driver in use: i801_smbus
>	Kernel modules: i2c-i801
>
>00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
>	Subsystem: Fujitsu Limited. Unknown device 1177
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 11
>	Region 0: I/O ports at 1000 [size=256]
>	Region 1: I/O ports at 1880 [size=64]
>	Kernel driver in use: Intel ICH
>	Kernel modules: snd-intel8x0
>
>00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02) (prog-if 00 [Generic])
>	Subsystem: Fujitsu Limited. Unknown device 10d1
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 11
>	Region 0: I/O ports at 1400 [size=256]
>	Region 1: I/O ports at 1800 [size=128]
>	Kernel driver in use: Intel ICH Modem
>	Kernel modules: snd-intel8x0m
>
>01:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
>	Subsystem: Fujitsu Limited. Unknown device 111c
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (8000ns min, 16000ns max)
>	Interrupt: pin A routed to IRQ 11
>	Region 0: I/O ports at 8000 [size=256]
>	Region 1: Memory at e0204800 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: 8139too
>	Kernel modules: 8139too, 8139cp
>
>01:0a.0 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller (rev 02)
>	Subsystem: Fujitsu Limited. Unknown device 10e6
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 168
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at e0205000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=01, secondary=02, subordinate=02, sec-latency=176
>	Memory window 0: 30000000-33fff000 (prefetchable)
>	Memory window 1: 34000000-37fff000
>	I/O window 0: 00008400-000084ff
>	I/O window 1: 00008800-000088ff
>	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
>	16-bit legacy interface ports at 0001
>	Kernel driver in use: yenta_cardbus
>
>01:0a.1 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller (rev 02)
>	Subsystem: Fujitsu Limited. Unknown device 10e6
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 168
>	Interrupt: pin B routed to IRQ 11
>	Region 0: Memory at e0206000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=01, secondary=03, subordinate=06, sec-latency=176
>	Memory window 0: 38000000-3bfff000 (prefetchable)
>	Memory window 1: 3c000000-3ffff000
>	I/O window 0: 00008c00-00008cff
>	I/O window 1: 00002000-000020ff
>	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
>	16-bit legacy interface ports at 0001
>	Kernel driver in use: yenta_cardbus
>
>01:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
>	Subsystem: Fujitsu Limited. Unknown device 1162
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at e0204000 (32-bit, non-prefetchable) [size=2K]
>	Region 1: Memory at e0200000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>	Kernel driver in use: firewire_ohci
>	Kernel modules: firewire-ohci
>
>01:0d.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01)
>	Subsystem: Fujitsu Limited. Unknown device 1169
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at e0300000 (32-bit, prefetchable) [size=4K]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: hostap_pci
>	Kernel modules: orinoco_pci, hostap_pci
>

Actions: View

Attachments on bug 440203: 300023 | 300024 | 300025 | 300026 | 300028 | 304625