Attachment 300163 Details for Bug 440101 – output of lspci -vvxxx from boot with 2.6.24.3-64

output of lspci -vvxxx from boot with 2.6.24.3-64

lspci (text/plain), 30.07 KB, created by Zbigniew Fiedorowicz on 2008-04-03 03:26:51 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Zbigniew Fiedorowicz

Created: 2008-04-03 03:26:51 UTC

Size: 30.07 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
>	Subsystem: Intel Corporation Unknown device d605
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information <?>
>	Kernel driver in use: agpgart-intel
>00: 86 80 70 27 06 00 90 20 02 00 00 06 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 05 d6
>30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
>40: 01 90 d1 fe 01 40 d1 fe 03 00 00 f0 01 80 d1 fe
>50: 00 00 30 00 09 00 00 00 00 00 00 00 00 00 00 00
>60: 01 30 d1 fe 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 10 11 11 11 11 33 33 00 ff 03 00 00 80 1a 39 00
>a0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 91 00 00 00
>e0: 09 00 09 71 0b e1 9b 98 07 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 03 00 00 00 00 00
>
>00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
>	Subsystem: Intel Corporation Unknown device d605
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 20
>	Region 0: Memory at 90100000 (32-bit, non-prefetchable) [size=512K]
>	Region 1: I/O ports at 20e0 [size=8]
>	Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M]
>	Region 3: Memory at 90180000 (32-bit, non-prefetchable) [size=256K]
>	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>		Address: 00000000  Data: 0000
>	Capabilities: [d0] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel modules: intelfb
>00: 86 80 72 27 07 00 90 00 02 00 00 03 00 00 00 00
>10: 00 00 10 90 e1 20 00 00 08 00 00 80 00 00 18 90
>20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 05 d6
>30: 00 00 00 00 90 00 00 00 00 00 00 00 0b 01 00 00
>40: 00 00 00 00 e0 00 00 00 09 00 09 71 0b e1 9b 98
>50: 07 00 30 00 09 00 00 00 00 00 00 00 00 00 80 7f
>60: 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 05 d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 34 05 64 34 00 00 00 00 86 0f 03 00 00 00 00 00
>
>00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
>	Subsystem: Intel Corporation Unknown device d605
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 22
>	Region 0: Memory at 901c0000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
>	Kernel driver in use: HDA Intel
>	Kernel modules: snd-hda-intel
>00: 86 80 d8 27 06 00 10 00 01 00 03 04 10 00 00 00
>10: 04 00 1c 90 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 05 d6
>30: 00 00 00 00 50 00 00 00 00 00 00 00 09 01 00 00
>40: 01 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00
>50: 01 60 42 c8 00 00 00 00 00 00 00 00 00 00 00 00
>60: 05 70 80 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 10 00 91 00 00 00 00 00 00 08 10 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00
>
>00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
>			ClockPM- Suprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
>			Slot #  1, PowerLimit 10.000000; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>		Address: fee0300c  Data: 41c1
>	Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pcieport-driver
>00: 86 80 d0 27 07 04 10 00 01 00 04 06 10 00 81 00
>10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 20
>20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 04 00
>40: 10 80 41 01 c0 0f 00 00 0f 00 10 00 11 4c 11 01
>50: 00 00 01 10 60 05 08 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 05 90 00 00 0c 30 e0 fe c1 41 00 00 00 00 00 00
>90: 0d a0 00 00 86 80 d0 27 00 00 00 00 00 00 00 00
>a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 11 80 00 00 00 00
>e0: 00 00 c7 00 06 07 08 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00
>
>00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
>			ClockPM- Suprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
>			Slot #  3, PowerLimit 10.000000; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>		Address: fee0300c  Data: 41c9
>	Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pcieport-driver
>00: 86 80 d4 27 07 04 10 00 01 00 04 06 10 00 81 00
>10: 00 00 00 00 00 00 00 00 00 02 02 00 f0 00 00 20
>20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 03 04 00
>40: 10 80 41 01 c0 0f 00 00 0f 00 10 00 11 4c 11 03
>50: 00 00 01 10 60 05 18 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 05 90 00 00 0c 30 e0 fe c9 41 00 00 00 00 00 00
>90: 0d a0 00 00 86 80 d4 27 00 00 00 00 00 00 00 00
>a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 11 80 00 00 00 00
>e0: 00 00 c7 00 06 07 08 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00
>
>00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
>			ClockPM- Suprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
>			Slot #  4, PowerLimit 10.000000; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>		Address: fee0300c  Data: 41d1
>	Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pcieport-driver
>00: 86 80 d6 27 07 04 10 00 01 00 04 06 10 00 81 00
>10: 00 00 00 00 00 00 00 00 00 03 03 00 f0 00 00 20
>20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 04 04 00
>40: 10 80 41 01 c0 0f 00 00 0f 00 10 00 11 4c 11 04
>50: 00 00 01 10 60 05 20 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 05 90 00 00 0c 30 e0 fe d1 41 00 00 00 00 00 00
>90: 0d a0 00 00 86 80 d6 27 00 00 00 00 00 00 00 00
>a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 11 80 00 00 00 00
>e0: 00 00 c7 00 06 07 08 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00
>
>00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: Intel Corporation Unknown device d605
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 19
>	Region 4: I/O ports at 2080 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>00: 86 80 c8 27 05 00 80 02 01 00 03 0c 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 81 20 00 00 00 00 00 00 00 00 00 00 86 80 05 d6
>30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 27 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00
>
>00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: Intel Corporation Unknown device d605
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 18
>	Region 4: I/O ports at 2060 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>00: 86 80 c9 27 05 00 80 02 01 00 03 0c 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 61 20 00 00 00 00 00 00 00 00 00 00 86 80 05 d6
>30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 27 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00
>
>00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: Intel Corporation Unknown device d605
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 17
>	Region 4: I/O ports at 2040 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>00: 86 80 ca 27 05 00 80 02 01 00 03 0c 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 41 20 00 00 00 00 00 00 00 00 00 00 86 80 05 d6
>30: 00 00 00 00 00 00 00 00 00 00 00 00 09 03 00 00
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 27 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00
>
>00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: Intel Corporation Unknown device d605
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 20
>	Region 4: I/O ports at 2020 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>00: 86 80 cb 27 05 00 80 02 01 00 03 0c 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 21 20 00 00 00 00 00 00 00 00 00 00 86 80 05 d6
>30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 27 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00
>
>00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
>	Subsystem: Intel Corporation Unknown device d605
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 19
>	Region 0: Memory at 901c4000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port: BAR=1 offset=00a0
>	Kernel driver in use: ehci_hcd
>	Kernel modules: ehci-hcd
>00: 86 80 cc 27 06 00 90 02 01 20 03 0c 00 00 00 00
>10: 00 40 1c 90 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 05 d6
>30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 01 58 c2 c9 00 00 00 00 0a 00 a0 20 00 00 00 00
>60: 20 20 ff 01 00 00 00 00 01 00 00 00 00 00 08 c0
>70: 00 00 df 3f 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 aa ff 00 ff 00 ff 00 20 00 00 88
>e0: 00 00 00 00 db b6 6d 00 00 00 00 00 00 00 00 00
>f0: 00 80 00 09 88 85 40 00 86 0f 01 00 06 17 02 20
>
>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
>	I/O behind bridge: 00001000-00001fff
>	Memory behind bridge: 90000000-900fffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Subsystem: Intel Corporation Unknown device d605
>00: 86 80 4e 24 07 00 10 00 e1 01 04 06 00 00 01 00
>10: 00 00 00 00 00 00 00 00 00 04 04 20 10 10 80 22
>20: 00 90 00 90 f1 ff 01 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 04 00
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 12 00 00
>50: 0d 00 00 00 86 80 05 d6 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00
>
>00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
>	Subsystem: Intel Corporation Unknown device d605
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information <?>
>	Kernel modules: iTCO_wdt, intel-rng
>00: 86 80 b8 27 07 00 10 02 01 00 01 06 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 05 d6
>30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
>40: 01 04 00 00 80 00 00 00 01 05 00 00 10 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 8b 80 89 8b d0 00 00 00 8a 80 89 8a 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 10 00 0f 3c 81 06 7c 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 02 04 00 31 00 00 00 13 00 00 00 00 03 00 00
>b0: 00 00 f0 00 00 00 00 00 00 00 00 08 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 33 22 11 00 67 45 00 00 c0 c0 00 00 00 00 00 00
>e0: 09 00 0c 10 a8 00 24 00 00 00 00 00 00 00 00 00
>f0: 01 c0 d1 fe 00 00 00 00 86 0f 01 00 00 00 00 00
>
>00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
>	Subsystem: Intel Corporation Unknown device d605
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 17
>	Region 0: I/O ports at 01f0 [size=8]
>	Region 1: I/O ports at 03f4 [size=1]
>	Region 2: I/O ports at 0170 [size=8]
>	Region 3: I/O ports at 0374 [size=1]
>	Region 4: I/O ports at 20b0 [size=16]
>	Kernel driver in use: ata_piix
>	Kernel modules: ata_piix
>00: 86 80 df 27 05 00 80 02 01 8a 01 01 00 00 00 00
>10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
>20: b1 20 00 00 00 00 00 00 00 00 00 00 86 80 05 d6
>30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00
>40: 37 e3 00 40 0b 00 00 00 03 00 21 00 00 00 00 00
>50: 00 00 00 00 10 10 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00
>
>00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
>	Subsystem: Intel Corporation Unknown device d605
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 18
>	Region 0: I/O ports at 20c8 [size=8]
>	Region 1: I/O ports at 20ec [size=4]
>	Region 2: I/O ports at 20c0 [size=8]
>	Region 3: I/O ports at 20e8 [size=4]
>	Region 4: I/O ports at 20a0 [size=16]
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: ata_piix
>	Kernel modules: ata_piix
>00: 86 80 c0 27 05 00 b0 02 01 8f 01 01 00 00 00 00
>10: c9 20 00 00 ed 20 00 00 c1 20 00 00 e9 20 00 00
>20: a1 20 00 00 00 00 00 00 00 00 00 00 86 80 05 d6
>30: 00 00 00 00 70 00 00 00 00 00 00 00 0b 02 00 00
>40: 00 80 88 80 00 00 00 00 0c 00 00 11 00 00 00 00
>50: 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 01 00 02 40 00 00 00 00 00 00 00 00 00 00 00 00
>80: 05 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 af 00 80 01 00 40 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 0d 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00
>
>00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
>	Subsystem: Intel Corporation Unknown device d605
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin B routed to IRQ 18
>	Region 4: I/O ports at 2000 [size=32]
>	Kernel driver in use: i801_smbus
>	Kernel modules: i2c-i801
>00: 86 80 da 27 01 00 80 02 01 00 05 0c 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 01 20 00 00 00 00 00 00 00 00 00 00 86 80 05 d6
>30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00
>40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00
>
>04:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection (rev 01)
>	Subsystem: Intel Corporation Unknown device d605
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 21
>	Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4K]
>	Region 1: I/O ports at 1000 [size=64]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>	Kernel driver in use: e100
>	Kernel modules: e100
>00: 86 80 94 10 17 00 90 02 01 00 00 02 10 20 00 00
>10: 00 00 00 90 01 10 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 05 d6
>30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 08 38
>40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 fe
>e0: 00 40 00 3a 00 00 00 00 00 00 00 00 00 00 00 00
>f0: 00 00 00 00 00 00 00 00 86 0f 01 00 00 00 00 00
>

Actions: View

Attachments on bug 440101: 299977 | 299993 | 299996 | 300160 | 300161 | 300162 | 300163 | 300173