Attachment 300345 Details for Bug 440470 – dmesg

dmesg

dmesg (text/plain), 29.95 KB, created by Eelco Hoekema on 2008-04-03 20:48:07 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Eelco Hoekema

Created: 2008-04-03 20:48:07 UTC

Size: 29.95 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.4-64.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sat Mar 29 09:15:49 EDT 2008
>Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007e0f8000 (usable)
> BIOS-e820: 000000007e0f8000 - 000000007e2f9000 (ACPI NVS)
> BIOS-e820: 000000007e2f9000 - 000000007eebe000 (ACPI data)
> BIOS-e820: 000000007eebe000 - 000000007eeef000 (ACPI NVS)
> BIOS-e820: 000000007eeef000 - 000000007ef00000 (ACPI data)
> BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 516344) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP 000FE020, 0024 (r2 APPLE )
>ACPI: XSDT 7EEFD1C0, 0074 (r1 APPLE   Apple00       A5       1000013)
>ACPI: FACP 7EEFB000, 00F4 (r3 APPLE   Apple00       A5 Loki       5F)
>ACPI: DSDT 7EEF0000, 41E4 (r1 APPLE   MacBook    20001 INTL 20050309)
>ACPI: FACS 7EEC0000, 0040
>ACPI: HPET 7EEFA000, 0038 (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: APIC 7EEF9000, 0068 (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: MCFG 7EEF8000, 003C (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: ASF! 7EEF7000, 00A0 (r32 APPLE   Apple00        1 Loki       5F)
>ACPI: SBST 7EEF6000, 0030 (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: ECDT 7EEF5000, 0053 (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: SSDT 7EEEF000, 04DC (r1 APPLE     CpuPm     3000 INTL 20050309)
>ACPI: SSDT 7EEBD000, 064F (r1 SataRe  SataPri     1000 INTL 20050309)
>ACPI: SSDT 7EEBC000, 069C (r1 SataRe  SataSec     1000 INTL 20050309)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007e0f8000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 516344) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007e0f8000
>No mptable found.
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   516344
>On node 0 totalpages: 516247
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1327 pages reserved
>  DMA zone: 2616 pages, LIFO batch:0
>  DMA32 zone: 7003 pages used for memmap
>  DMA32 zone: 505245 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 42248 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 507861
>Policy zone: DMA32
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>hpet clockevent registered
>TSC calibrated against HPET
>time.c: Detected 1994.998 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2026752k/2065376k available (2491k kernel code, 38236k reserved, 1390k data, 332k init)
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 3993.63 BogoMIPS (lpj=1996817)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 10390619
>Detected 10.390 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3989.82 BogoMIPS (lpj=1994910)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=2224 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>net_namespace: 120 bytes
>Time: 17:29:21  Date: 04/03/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: DMI System Vendor: Apple Inc.
>ACPI: DMI Product Name: MacBook2,1
>ACPI: DMI Product Version: 1.0
>ACPI: DMI Board Name: Mac-F4208CA9
>ACPI: DMI BIOS Vendor: Apple Inc.
>ACPI: DMI BIOS Date: 06/27/07
>ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
>ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0500-053f claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:No DMAR devices found
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
>system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
>system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
>system 00:07: ioport range 0x680-0x6ef has been reserved
>system 00:07: ioport range 0x800-0x80f has been reserved
>system 00:07: ioport range 0x810-0x817 has been reserved
>system 00:07: ioport range 0x400-0x47f has been reserved
>system 00:07: ioport range 0x500-0x53f has been reserved
>system 00:07: ioport range 0x1640-0x164f has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: 1000-1fff
>  MEM window: 90200000-902fffff
>  PREFETCH window: 90500000-905fffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: 90100000-901fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: 90000000-900fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 3901k freed
>audit: initializing netlink socket (disabled)
>audit(1207243761.597:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key AE93BC01E4B9E1B3
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7EEB8C10, 026C (r1 APPLE   Cpu0Ist     3000 INTL 20050309)
>ACPI: SSDT 7EEB8910, 02A0 (r1 APPLE   Cpu0Cst     3001 INTL 20050309)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7EEB8F10, 0087 (r1 APPLE   Cpu1Ist     3000 INTL 20050309)
>ACPI: SSDT 7EEB7F10, 0085 (r1 APPLE   Cpu1Cst     3000 INTL 20050309)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 16124K stolen memory.
>agpgart: AGP aperture is 256M @ 0x80000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>i8042.c: No controller found.
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>Marking TSC unstable due to TSC halts in idle
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 4:939:490
>Time: hpet clocksource has been installed.
>Freeing unused kernel memory: 332k freed
>Write protecting the kernel read-only data: 1080k
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 21, io mem 0x90445400
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>Clocksource tsc unstable (delta = -330263045 ns)
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 21, io base 0x00002080
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-3: new high speed USB device using ehci_hcd and address 3
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x20b0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x20b8 irq 15
>usb 1-3: configuration #1 chosen from 1 choice
>usb 1-4: new high speed USB device using ehci_hcd and address 4
>ata1.00: ATAPI: MATSHITADVD-R   UJ-857D, KBVB, max UDMA/66
>usb 1-4: configuration #1 chosen from 1 choice
>ata1.00: configured for UDMA/66
>scsi 0:0:0:0: CD-ROM            MATSHITA DVD-R   UJ-857D  KBVB PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x20c8 ctl 0x20ec bmdma 0x20a0 irq 19
>ata4: SATA max UDMA/133 cmd 0x20c0 ctl 0x20e8 bmdma 0x20a8 irq 19
>ata3.01: ATA-7: Hitachi HTS541616J9SA00, SB4AC7CP, max UDMA/133
>ata3.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.01: configured for UDMA/133
>usb 2-2: new full speed USB device using uhci_hcd and address 2
>scsi 2:0:1:0: Direct-Access     ATA      Hitachi HTS54161 SB4A PQ: 0 ANSI: 5
>sd 2:0:1:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 2:0:1:0: [sda] Write Protect is off
>sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:1:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 2:0:1:0: [sda] Write Protect is off
>sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 2:0:1:0: [sda] Attached SCSI disk
>usb 2-2: configuration #1 chosen from 1 choice
>input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input1
>input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
>input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input2
>input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>usb 4-2: configuration #1 chosen from 1 choice
>hiddev96hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
>usb 5-1: new full speed USB device using uhci_hcd and address 2
>usb 5-1: configuration #1 chosen from 1 choice
>input: HID 05ac:1000 as /class/input/input3
>input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
>input: HID 05ac:1000 as /class/input/input4
>input,hidraw4: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1207243770.426:2): selinux=0 auid=4294967295
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>sd 2:0:1:0: Attached scsi generic sg1 type 0
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>intel_rng: FWH not detected
>input: PC Speaker as /class/input/input5
>appletouch: Geyser mode initialized.
>input: appletouch as /class/input/input6
>input: Power Button (FF) as /class/input/input7
>usbcore: registered new interface driver appletouch
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input8
>ACPI: Lid Switch [LID0]
>input: Power Button (CM) as /class/input/input9
>iTCO_vendor_support: vendor-support=0
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input10
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: AC Adapter [ADP1] (on-line)
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>ath5k_pci 0000:02:00.0: registered as 'phy0'
>ath5k phy0: Device not yet supported.
>ACPI: PCI interrupt for device 0000:02:00.0 disabled
>input: Video Bus as /class/input/input11
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>sky2 0000:01:00.0: v1.20 addr 0x90200000 irq 16 Yukon-EC (0xb6) rev 2
>sky2 eth0: addr 00:17:f2:db:54:36
>ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:03:03.0, OHCI version 1.0
>usb 1-3: reset high speed USB device using ehci_hcd and address 3
>phy1: Selected rate control algorithm 'pid'
>zd1211rw 1-3:1.0: phy1
>usbcore: registered new interface driver zd1211rw
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:732: codec_mask = 0x1
>ALSA sound/pci/hda/hda_codec.c:2162: hda_codec: model 'intel-mac-v3' is selected for config 8384:7680 (Mac Mini)
>hda_codec: STAC922x, Apple subsys_id=106b2200
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 0a pin config 0321e21f
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 0b pin config 03a1e02e
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 0c pin config 9017e110
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 0d pin config 9017e11f
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 0e pin config 400000fe
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 0f pin config 0381e020
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 10 pin config 1345e230
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 11 pin config 13c5e240
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 15 pin config 400000fc
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 1b pin config 400000fb
>ALSA sound/pci/hda/hda_codec.c:2757: autoconfig: line_outs=2 (0xc/0xd/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2761:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2765:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2773:    inputs: mic=0xb, fmic=0x0, line=0xf, fline=0x0, cd=0x0, aux=0x0
>ALSA sound/pci/hda/patch_sigmatel.c:1614: stac92xx_add_dyn_out_pins: total dac count=4
>ALSA sound/pci/hda/patch_sigmatel.c:1737: dac_nids=4 (0x3/0x2/0x5/0x4/0x0)
>firewire_core: created device fw0: GUID 0019e3fffe92ce5a, S400
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>appletouch: incomplete data package (first byte: 2, length: 4).
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1048568k swap on /dev/mapper/VolGroup00-LogVol02.  Priority:-1 extents:1 across:1048568k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>sky2 eth0: disabling interface
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>fuse init (API version 7.9)
>audit(1207243795.169:3): audit_pid=2108 old=0 by auid=4294967295
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>zd1211rw 1-3:1.0: firmware version 4605
>zd1211rw 1-3:1.0: zd1211 chip 0df6:9071 v4330 high 00-0c-f6 AL2230_RF pa0 -----
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:16:0a:0e:e3:b0
>wlan0: RX authentication from 00:16:0a:0e:e3:b0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:16:0a:0e:e3:b0
>wlan0: RX AssocResp from 00:16:0a:0e:e3:b0 (capab=0x401 status=0 aid=2)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: RX non-WEP frame, but expected encryption
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1b:2f:9a:b0:fc
>wlan0: RX authentication from 00:1b:2f:9a:b0:fc (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:2f:9a:b0:fc
>wlan0: RX AssocResp from 00:1b:2f:9a:b0:fc (capab=0x411 status=0 aid=1)
>wlan0: associated
>wlan0: no IPv6 routers present
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection enabled (BSSID=00:1b:2f:9a:b0:fc)
>wlan0: CTS protection disabled (BSSID=00:1b:2f:9a:b0:fc)

Actions: View

Attachments on bug 440470: 300345