Attachment 301404 Details for Bug 441087 – scsconfig.log output from system-config-soundcard

scsconfig.log output from system-config-soundcard

scsconfig.log (text/plain), 68.00 KB, created by Andrew Farris on 2008-04-06 00:07:15 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andrew Farris

Created: 2008-04-06 00:07:15 UTC

Size: 68.00 KB

patch

obsolete

>------- System Config Soundcard Log --------
>Sat Apr  5 16:58:08 PDT 2008
>
>------- lspci --------
>00:00.0 Host bridge: Intel Corporation 82850 850 (Tehama) Chipset Host Bridge (MCH) (rev 04)
>00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP Bridge (rev 04)
>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 04)
>00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 04)
>00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 Controller (rev 04)
>00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 04)
>00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus Controller (rev 04)
>00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 04)
>00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio Controller (rev 04)
>01:00.0 VGA compatible controller: nVidia Corporation NV35 [GeForce FX 5900XT] (rev a1)
>02:07.0 USB Controller: NEC Corporation USB (rev 43)
>02:07.1 USB Controller: NEC Corporation USB (rev 43)
>02:07.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
>02:08.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
>02:09.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
>02:09.1 Input device controller: Creative Labs SB Audigy Game Port (rev 03)
>02:09.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
>02:0a.0 Ethernet controller: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
>02:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
>
>------- lspci -vn --------
>00:00.0 0600: 8086:2530 (rev 04)
>	Subsystem: 1028:010d
>	Flags: bus master, fast devsel, latency 0
>	Memory at e0000000 (32-bit, prefetchable) [size=256M]
>	Capabilities: [a0] AGP version 2.0
>	Kernel driver in use: agpgart-intel
>
>00:01.0 0604: 8086:2532 (rev 04) (prog-if 00 [Normal decode])
>	Flags: bus master, 66MHz, fast devsel, latency 64
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>	Memory behind bridge: fc000000-fdffffff
>	Prefetchable memory behind bridge: f0000000-f7ffffff
>
>00:1e.0 0604: 8086:244e (rev 04) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
>	I/O behind bridge: 0000e000-0000efff
>	Memory behind bridge: fe100000-fe2fffff
>	Prefetchable memory behind bridge: 50000000-500fffff
>
>00:1f.0 0601: 8086:2440 (rev 04)
>	Flags: bus master, medium devsel, latency 0
>	Kernel modules: iTCO_wdt, intel-rng
>
>00:1f.1 0101: 8086:244b (rev 04) (prog-if 80 [Master])
>	Subsystem: 1028:010d
>	Flags: bus master, medium devsel, latency 0
>	[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
>	[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
>	[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
>	[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
>	I/O ports at ffa0 [size=16]
>	Kernel driver in use: ata_piix
>	Kernel modules: ata_piix
>
>00:1f.2 0c03: 8086:2442 (rev 04) (prog-if 00 [UHCI])
>	Subsystem: 1028:010d
>	Flags: bus master, medium devsel, latency 0, IRQ 19
>	I/O ports at ff80 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1f.3 0c05: 8086:2443 (rev 04)
>	Subsystem: 1028:010d
>	Flags: medium devsel, IRQ 17
>	I/O ports at dcd0 [size=16]
>	Kernel driver in use: i801_smbus
>	Kernel modules: i2c-i801
>
>00:1f.4 0c03: 8086:2444 (rev 04) (prog-if 00 [UHCI])
>	Subsystem: 1028:010d
>	Flags: bus master, medium devsel, latency 0, IRQ 23
>	I/O ports at ff60 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1f.5 0401: 8086:2445 (rev 04)
>	Subsystem: 1028:010d
>	Flags: bus master, medium devsel, latency 0, IRQ 17
>	I/O ports at d800 [size=256]
>	I/O ports at dc40 [size=64]
>	Kernel driver in use: Intel ICH
>	Kernel modules: snd-intel8x0
>
>01:00.0 0300: 10de:0332 (rev a1) (prog-if 00 [VGA controller])
>	Flags: VGA palette snoop, 66MHz, medium devsel, IRQ 7
>	Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
>	Memory at f0000000 (32-bit, prefetchable) [size=128M]
>	Expansion ROM at fd000000 [disabled] [size=128K]
>	Capabilities: [60] Power Management version 2
>	Capabilities: [44] AGP version 3.0
>	Kernel modules: nvidiafb
>
>02:07.0 0c03: 1033:0035 (rev 43) (prog-if 10 [OHCI])
>	Subsystem: 1033:0035
>	Flags: bus master, medium devsel, latency 64, IRQ 16
>	Memory at fe1ff000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [40] Power Management version 2
>	Kernel driver in use: ohci_hcd
>	Kernel modules: ohci-hcd
>
>02:07.1 0c03: 1033:0035 (rev 43) (prog-if 10 [OHCI])
>	Subsystem: 1033:0035
>	Flags: bus master, medium devsel, latency 64, IRQ 17
>	Memory at fe1fe000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [40] Power Management version 2
>	Kernel driver in use: ohci_hcd
>	Kernel modules: ohci-hcd
>
>02:07.2 0c03: 1033:00e0 (rev 04) (prog-if 20 [EHCI])
>	Subsystem: 0e55:2928
>	Flags: bus master, medium devsel, latency 64, IRQ 18
>	Memory at fe1fdc00 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [40] Power Management version 2
>	Kernel driver in use: ehci_hcd
>	Kernel modules: ehci-hcd
>
>02:08.0 0280: 1814:0201 (rev 01)
>	Subsystem: 1737:0032
>	Flags: bus master, slow devsel, latency 64, IRQ 17
>	Memory at fe1fa000 (32-bit, non-prefetchable) [size=8K]
>	Capabilities: [40] Power Management version 2
>	Kernel driver in use: rt2500pci
>	Kernel modules: rt2500pci
>
>02:09.0 0401: 1102:0004 (rev 03)
>	Subsystem: 1102:0051
>	Flags: bus master, medium devsel, latency 64, IRQ 18
>	I/O ports at ece0 [size=32]
>	Capabilities: [dc] Power Management version 2
>	Kernel driver in use: EMU10K1_Audigy
>	Kernel modules: snd-emu10k1
>
>02:09.1 0980: 1102:7003 (rev 03)
>	Subsystem: 1102:0040
>	Flags: bus master, medium devsel, latency 64
>	I/O ports at ecd8 [size=8]
>	Capabilities: [dc] Power Management version 2
>	Kernel driver in use: Emu10k1_gameport
>	Kernel modules: emu10k1-gp
>
>02:09.2 0c00: 1102:4001 (prog-if 10 [OHCI])
>	Subsystem: 1102:0010
>	Flags: bus master, medium devsel, latency 64, IRQ 19
>	Memory at fe1fd000 (32-bit, non-prefetchable) [size=2K]
>	Memory at fe1f4000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: [44] Power Management version 2
>	Kernel driver in use: firewire_ohci
>	Kernel modules: firewire-ohci
>
>02:0a.0 0200: 1317:0985 (rev 11)
>	Subsystem: 1317:0574
>	Flags: bus master, medium devsel, latency 64, IRQ 19
>	I/O ports at e800 [size=256]
>	Memory at fe1fd800 (32-bit, non-prefetchable) [size=1K]
>	Expansion ROM at 50000000 [disabled] [size=128K]
>	Capabilities: [c0] Power Management version 2
>	Kernel driver in use: tulip
>	Kernel modules: tulip
>
>02:0c.0 0200: 10b7:9200 (rev 78)
>	Subsystem: 1028:010d
>	Flags: bus master, medium devsel, latency 64, IRQ 18
>	I/O ports at ec00 [size=128]
>	Memory at fe1fcc00 (32-bit, non-prefetchable) [size=128]
>	Expansion ROM at 50020000 [disabled] [size=128K]
>	Capabilities: [dc] Power Management version 2
>	Kernel driver in use: 3c59x
>	Kernel modules: 3c59x
>
>------- lsmod --------
>Module                  Size  Used by
>firewire_sbp2          16676  2 
>fuse                   41900  2 
>rfcomm                 35872  0 
>l2cap                  22544  9 rfcomm
>bluetooth              50092  4 rfcomm,l2cap
>autofs4                20636  2 
>smsc47m192             15896  0 
>hwmon_vid               6400  1 smsc47m192
>hwmon                   6276  1 smsc47m192
>sunrpc                155780  3 
>ipt_REJECT              6784  1 
>ipt_LOG                 9088  0 
>nf_conntrack_ipv4      11396  6 
>iptable_filter          6528  1 
>ip_tables              13840  1 iptable_filter
>ip6t_REJECT             7552  1 
>xt_tcpudp               6656  22 
>ip6t_LOG                9472  0 
>xt_limit                6144  2 
>nf_conntrack_ipv6      15892  4 
>xt_state                5888  10 
>nf_conntrack           51264  3 nf_conntrack_ipv4,nf_conntrack_ipv6,xt_state
>ip6table_filter         6400  1 
>ip6_tables             14736  2 ip6t_LOG,ip6table_filter
>x_tables               15380  9 ipt_REJECT,ipt_LOG,ip_tables,ip6t_REJECT,xt_tcpudp,ip6t_LOG,xt_limit,xt_state,ip6_tables
>ipv6                  228172  19 ip6t_REJECT,nf_conntrack_ipv6
>vfat                   13056  1 
>fat                    43444  1 vfat
>ext3                  109872  2 
>jbd                    43220  1 ext3
>dm_multipath           18600  0 
>snd_emu10k1_synth      10240  0 
>snd_emux_synth         34208  1 snd_emu10k1_synth
>snd_seq_virmidi         9096  1 snd_emux_synth
>snd_seq_midi_emul       9088  1 snd_emux_synth
>dcdbas                 10400  0 
>snd_emu10k1           126436  7 snd_emu10k1_synth
>snd_rawmidi            22416  2 snd_seq_virmidi,snd_emu10k1
>floppy                 53796  0 
>snd_intel8x0           30500  3 
>snd_ac97_codec         95424  2 snd_emu10k1,snd_intel8x0
>serio_raw               8836  0 
>pcspkr                  6272  0 
>ac97_bus                5504  1 snd_ac97_codec
>snd_seq_dummy           6660  0 
>i2c_i801               12304  0 
>i2c_core               20880  2 smsc47m192,i2c_i801
>arc4                    5760  2 
>snd_seq_oss            30628  0 
>snd_seq_midi_event      9736  2 snd_seq_virmidi,snd_seq_oss
>snd_seq                49296  8 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>ecb                     6528  2 
>usb_storage            75536  0 
>snd_pcm_oss            42504  0 
>snd_mixer_oss          16904  3 snd_pcm_oss
>snd_pcm                67116  5 snd_emu10k1,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
>snd_seq_device         10260  7 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq
>rt2500pci              21376  0 
>rt2x00pci              10752  1 rt2500pci
>snd_timer              21916  3 snd_emu10k1,snd_seq,snd_pcm
>rt2x00lib              32432  2 rt2500pci,rt2x00pci
>snd_page_alloc         11528  3 snd_emu10k1,snd_intel8x0,snd_pcm
>snd_util_mem            7560  2 snd_emux_synth,snd_emu10k1
>rfkill                  9372  1 rt2x00lib
>firewire_ohci          21388  0 
>snd_hwdep              10764  2 snd_emux_synth,snd_emu10k1
>firewire_core          35112  2 firewire_sbp2,firewire_ohci
>3c59x                  39984  0 
>input_polldev           7448  1 rt2x00lib
>tulip                  46996  0 
>snd                    49380  31 snd_emu10k1_synth,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_emu10k1,snd_rawmidi,snd_intel8x0,snd_ac97_codec,snd_seq_dummy,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,snd_timer,snd_util_mem,snd_hwdep
>mii                     8192  1 3c59x
>mac80211              189944  2 rt2x00pci,rt2x00lib
>crc_itu_t               5760  1 firewire_core
>soundcore               9284  3 snd
>emu10k1_gp              6656  0 
>gameport               14104  2 emu10k1_gp
>cfg80211               25240  2 rt2x00lib,mac80211
>eeprom_93cx6            5888  1 rt2500pci
>button                 10000  0 
>joydev                 13016  0 
>iTCO_wdt               13640  0 
>iTCO_vendor_support     6916  1 iTCO_wdt
>intel_rng               8448  0 
>sg                     31912  0 
>sr_mod                 17316  0 
>cdrom                  32796  1 sr_mod
>ata_generic             8964  0 
>pata_acpi               8192  0 
>ata_piix               19972  5 
>libata                127764  3 ata_generic,pata_acpi,ata_piix
>sd_mod                 25984  10 
>scsi_mod              122868  6 firewire_sbp2,usb_storage,sg,sr_mod,libata,sd_mod
>sha256_generic         16000  0 
>cbc                     7168  2 
>aes_i586               11648  4 
>aes_generic            30888  1 aes_i586
>dm_crypt               15396  1 
>crypto_blkcipher       18596  5 ecb,cbc,dm_crypt
>dm_snapshot            19080  0 
>dm_zero                 5632  0 
>dm_mirror              26800  0 
>dm_mod                 50864  9 dm_multipath,dm_crypt,dm_snapshot,dm_zero,dm_mirror
>ext4dev               176896  2 
>jbd2                   58476  1 ext4dev
>mbcache                10240  2 ext3,ext4dev
>crc16                   5760  1 ext4dev
>uhci_hcd               31256  0 
>ohci_hcd               33824  0 
>ehci_hcd               44576  0 
>
>------- /etc/modprobe.conf --------
>
>
>------- /etc/asound.conf --------
>
>
>------- aplay -l --------
>**** List of PLAYBACK Hardware Devices ****
>card 0: I82801BAICH2 [Intel 82801BA-ICH2], device 0: Intel ICH [Intel 82801BA-ICH2]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
>card 1: Audigy [Audigy 1 [SB0090]], device 0: emu10k1 [ADC Capture/Standard PCM Playback]
>  Subdevices: 31/32
>  Subdevice #0: subdevice #0
>  Subdevice #1: subdevice #1
>  Subdevice #2: subdevice #2
>  Subdevice #3: subdevice #3
>  Subdevice #4: subdevice #4
>  Subdevice #5: subdevice #5
>  Subdevice #6: subdevice #6
>  Subdevice #7: subdevice #7
>  Subdevice #8: subdevice #8
>  Subdevice #9: subdevice #9
>  Subdevice #10: subdevice #10
>  Subdevice #11: subdevice #11
>  Subdevice #12: subdevice #12
>  Subdevice #13: subdevice #13
>  Subdevice #14: subdevice #14
>  Subdevice #15: subdevice #15
>  Subdevice #16: subdevice #16
>  Subdevice #17: subdevice #17
>  Subdevice #18: subdevice #18
>  Subdevice #19: subdevice #19
>  Subdevice #20: subdevice #20
>  Subdevice #21: subdevice #21
>  Subdevice #22: subdevice #22
>  Subdevice #23: subdevice #23
>  Subdevice #24: subdevice #24
>  Subdevice #25: subdevice #25
>  Subdevice #26: subdevice #26
>  Subdevice #27: subdevice #27
>  Subdevice #28: subdevice #28
>  Subdevice #29: subdevice #29
>  Subdevice #30: subdevice #30
>  Subdevice #31: subdevice #31
>card 1: Audigy [Audigy 1 [SB0090]], device 2: emu10k1 efx [Multichannel Capture/PT Playback]
>  Subdevices: 8/8
>  Subdevice #0: subdevice #0
>  Subdevice #1: subdevice #1
>  Subdevice #2: subdevice #2
>  Subdevice #3: subdevice #3
>  Subdevice #4: subdevice #4
>  Subdevice #5: subdevice #5
>  Subdevice #6: subdevice #6
>  Subdevice #7: subdevice #7
>card 1: Audigy [Audigy 1 [SB0090]], device 3: emu10k1 [Multichannel Playback]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
>
>------- amixer --------
>Simple mixer control 'Master',0
>  Capabilities: pvolume pswitch pswitch-joined
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 65536
>  Mono:
>  Front Left: Playback 65536 [100%] [on]
>  Front Right: Playback 65536 [100%] [on]
>Simple mixer control 'Capture',0
>  Capabilities: cvolume cswitch cswitch-joined
>  Capture channels: Front Left - Front Right
>  Limits: Capture 0 - 65536
>  Front Left: Capture 0 [0%] [on]
>  Front Right: Capture 0 [0%] [on]
>
>------- /proc/asound/version --------
>Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC).
>
>------- rpm -q alsa-lib --------
>alsa-lib-1.0.16-2.fc9.i386
>
>------- rpm -q alsa-utils --------
>alsa-utils-1.0.16-2.fc9.i386
>
>------- /proc/asound/modules --------
> 0 snd_intel8x0
> 1 snd_emu10k1
>
>------- /proc/asound/pcm --------
>00-01: Intel ICH - MIC ADC : Intel 82801BA-ICH2 - MIC ADC : capture 1
>00-00: Intel ICH : Intel 82801BA-ICH2 : playback 1 : capture 1
>01-03: emu10k1 : Multichannel Playback : playback 1
>01-02: emu10k1 efx : Multichannel Capture/PT Playback : playback 8 : capture 1
>01-01: emu10k1 mic : Mic Capture : capture 1
>01-00: emu10k1 : ADC Capture/Standard PCM Playback : playback 32 : capture 1
>
>------- /etc/sysconfig/hwconf --------
>
>
>------- dmesg --------
>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-0.195.rc8.git1.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080326 (Red Hat 4.3.0-5) (GCC) ) #1 SMP Thu Apr 3 09:42:34 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ff77000 (usable)
> BIOS-e820: 000000003ff77000 - 000000003ff79000 (ACPI NVS)
> BIOS-e820: 000000003ff79000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>found SMP MP-table at [c00fe710] 000fe710
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 262007) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262007
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   262007
>On node 0 totalpages: 262007
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4040 pages, LIFO batch:0
>  Normal zone: 3080 pages used for memmap
>  Normal zone: 222200 pages, LIFO batch:31
>  HighMem zone: 446 pages used for memmap
>  HighMem zone: 32185 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FD560, 0014 (r0 DELL  )
>ACPI: RSDT 000FD574, 0034 (r1 DELL    WS 340         8 ASL        61)
>ACPI: FACP 000FD5A8, 0074 (r1 DELL    WS 340         8 ASL        61)
>ACPI: DSDT FFFE3C22, 23AD (r1   DELL    dt_ex     1000 MSFT  100000D)
>ACPI: FACS 3FF77000, 0040
>ACPI: SSDT FFFE61C6, 0096 (r1   DELL    st_ex     1000 MSFT  100000D)
>ACPI: APIC 000FD61C, 005C (r1 DELL    WS 340         8 ASL        61)
>ACPI: BOOT 000FD678, 0028 (r1 DELL    WS 340         8 ASL        61)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258425
>Kernel command line: ro root=UUID=8301cc68-612d-41d0-9e05-112d8fd6bc9d quiet vga=792
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0820000 soft=c0800000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1994.000 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1024 kB
> per task-struct memory footprint: 2688 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1021708k/1048028k available (2310k kernel code, 25528k reserved, 1184k data, 568k init, 130524k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc076f000 - 0xc07fd000   ( 568 kB)
>      .data : 0xc0641929 - 0xc07699f0   (1184 kB)
>      .text : 0xc0400000 - 0xc0641929   (2310 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=128, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3994.27 BogoMIPS (lpj=1997137)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Hyper-Threading is disabled
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
>Total of 1 processors activated (3994.27 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=608 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=860 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=6560 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>khelper used greatest stack depth: 3032 bytes left
>net_namespace: 620 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 10:57:51  Date: 04/05/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfbe5e, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0x100000-0xffffff could not be reserved
>system 00:00: iomem range 0x1000000-0x3ff76fff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
>system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved
>system 00:00: iomem range 0xffb00000-0xffbfffff could not be reserved
>system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved
>system 00:09: ioport range 0x800-0x85f has been reserved
>system 00:09: ioport range 0xc00-0xc7f has been reserved
>system 00:09: ioport range 0x860-0x8ff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: 0xfc000000-0xfdffffff
>  PREFETCH window: 0x00000000f0000000-0x00000000f7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: e000-efff
>  MEM window: 0xfe100000-0xfe2fffff
>  PREFETCH window: 0x0000000050000000-0x00000000500fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3059k freed
>khelper used greatest stack depth: 2992 bytes left
>Simple Boot Flag at 0x7a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>khelper used greatest stack depth: 2652 bytes left
>audit: initializing netlink socket (disabled)
>type=2000 audit(1207393071.999:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>Switched to high resolution mode on CPU 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:1f.2: uhci_check_and_reset_hc: legsup = 0x001b
>pci 0000:00:1f.2: Performing full reset
>pci 0000:00:1f.4: uhci_check_and_reset_hc: cmd = 0x0000
>pci 0000:00:1f.4: Performing full reset
>pci 0000:01:00.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 6144k, total 131072k
>vesafb: mode is 1024x768x32, linelength=4096, pages=1
>vesafb: protected mode interface info at c000:e4c0
>vesafb: pmi: set display start = c00ce4f6, set palette = c00ce560
>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>fbcon: VESA VGA (fb0) is primary device
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI: ACPI0007:00 is registered as cooling_device0
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>khelper used greatest stack depth: 2536 bytes left
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel i850 Chipset.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one day
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 4:862:981
>Freeing unused kernel memory: 568k freed
>Write protecting the kernel read-only data: 948k
>ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
>ACPI: PCI Interrupt 0000:02:07.2[C] -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:02:07.2: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:02:07.2: reset hcs_params 0x2395 dbg=0 cc=2 pcc=3 ports=5
>ehci_hcd 0000:02:07.2: reset portroute 1 0 1 0 0 
>ehci_hcd 0000:02:07.2: reset hcc_params e806 thresh 0 uframes 256/512/1024 park
>ehci_hcd 0000:02:07.2: park 0
>ehci_hcd 0000:02:07.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:02:07.2: MWI active
>ehci_hcd 0000:02:07.2: supports USB remote wakeup
>ehci_hcd 0000:02:07.2: irq 18, io mem 0xfe1fdc00
>ehci_hcd 0000:02:07.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:02:07.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
>ehci_hcd 0000:02:07.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: default language 0x0409
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 5 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: individual port power switching
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: Single TT
>hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: enabling power on all ports
>drivers/usb/core/inode.c: creating file '001'
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.195.rc8.git1.fc9.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:02:07.2
>modprobe used greatest stack depth: 1832 bytes left
>hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0000
>ehci_hcd 0000:02:07.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 64 td 64
>hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
>ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:02:07.0: OHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:02:07.0: enabled NEC chipset lost interrupt quirk
>ohci_hcd 0000:02:07.0: created debug files
>ohci_hcd 0000:02:07.0: irq 16, io mem 0xfe1ff000
>hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
>ohci_hcd 0000:02:07.0: OHCI controller state
>ohci_hcd 0000:02:07.0: OHCI 1.0, NO legacy support registers
>ohci_hcd 0000:02:07.0: control 0x083 HCFS=operational CBSR=3
>ohci_hcd 0000:02:07.0: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:02:07.0: intrstatus 0x00000004 SF
>ohci_hcd 0000:02:07.0: intrenable 0x8000005a MIE RHSC UE RD WDH
>ohci_hcd 0000:02:07.0: hcca frame #00bc
>ohci_hcd 0000:02:07.0: roothub.a 0f000203 POTPGT=15 NPS NDP=3(3)
>ohci_hcd 0000:02:07.0: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:02:07.0: roothub.status 00008000 DRWE
>ohci_hcd 0000:02:07.0: roothub.portstatus [0] 0x00000100 PPS
>ohci_hcd 0000:02:07.0: roothub.portstatus [1] 0x00000100 PPS
>ohci_hcd 0000:02:07.0: roothub.portstatus [2] 0x00000100 PPS
>ehci_hcd 0000:02:07.2: port 1 full speed --> companion
>ehci_hcd 0000:02:07.2: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT
>hub 1-0:1.0: port 1 not reset yet, waiting 50ms
>usb usb2: default language 0x0409
>ehci_hcd 0000:02:07.2: GetStatus port 1 status 003802 POWER OWNER sig=j CSC
>ehci_hcd 0000:02:07.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>ehci_hcd 0000:02:07.2: port 3 high speed
>ehci_hcd 0000:02:07.2: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: global over-current protection
>hub 2-0:1.0: power on to power good time: 30ms
>usb 1-3: new high speed USB device using ehci_hcd and address 3
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: no over-current condition exists
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:02:07.2: port 3 high speed
>ehci_hcd 0000:02:07.2: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
>drivers/usb/core/inode.c: creating file '001'
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-0.195.rc8.git1.fc9.i686 ohci_hcd
>usb usb2: SerialNumber: 0000:02:07.0
>ACPI: PCI Interrupt 0000:02:07.1[B] -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:02:07.1: OHCI Host Controller
>drivers/usb/core/inode.c: creating file '003'
>ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:02:07.1: enabled NEC chipset lost interrupt quirk
>ohci_hcd 0000:02:07.1: created debug files
>ohci_hcd 0000:02:07.1: irq 17, io mem 0xfe1fe000
>usb 1-3: default language 0x0409
>usb 1-3: uevent
>usb 1-3: usb_probe_device
>usb 1-3: configuration #1 chosen from 1 choice
>ohci_hcd 0000:02:07.1: OHCI controller state
>ohci_hcd 0000:02:07.1: OHCI 1.0, NO legacy support registers
>ohci_hcd 0000:02:07.1: control 0x083 HCFS=operational CBSR=3
>ohci_hcd 0000:02:07.1: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:02:07.1: intrstatus 0x00000004 SF
>ohci_hcd 0000:02:07.1: intrenable 0x8000005a MIE RHSC UE RD WDH
>ohci_hcd 0000:02:07.1: hcca frame #00bf
>ohci_hcd 0000:02:07.1: roothub.a 0f000202 POTPGT=15 NPS NDP=2(2)
>ohci_hcd 0000:02:07.1: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:02:07.1: roothub.status 00008000 DRWE
>ohci_hcd 0000:02:07.1: roothub.portstatus [0] 0x00000100 PPS
>ohci_hcd 0000:02:07.1: roothub.portstatus [1] 0x00000100 PPS
>usb 1-3: adding 1-3:1.0 (config #1, interface 0)
>usb 1-3:1.0: uevent
>drivers/usb/core/inode.c: creating file '003'
>usb 1-3: New USB device found, idVendor=4971, idProduct=ce14
>usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-3: Product: FP-UFE2 FW:1.1516
>usb 1-3: Manufacturer: Vimtron
>usb 1-3: SerialNumber: 0714100001
>ehci_hcd 0000:02:07.2: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
>usb usb3: default language 0x0409
>usb usb3: uevent
>usb usb3: usb_probe_device
>hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>ehci_hcd 0000:02:07.2: port 5 high speed
>ehci_hcd 0000:02:07.2: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT
>usb 3-0:1.0: uevent
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>usb 1-5: new high speed USB device using ehci_hcd and address 4
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: global over-current protection
>hub 3-0:1.0: power on to power good time: 30ms
>ehci_hcd 0000:02:07.2: port 5 high speed
>ehci_hcd 0000:02:07.2: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: no over-current condition exists
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>usb 1-5: default language 0x0409
>usb 1-5: uevent
>usb 1-5: usb_probe_device
>usb 1-5: configuration #1 chosen from 1 choice
>drivers/usb/core/inode.c: creating file '001'
>usb 1-5: adding 1-5:1.0 (config #1, interface 0)
>usb 1-5:1.0: uevent
>drivers/usb/core/inode.c: creating file '004'
>usb 1-5: New USB device found, idVendor=13fe, idProduct=1a00
>usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-5: Product: DataTraveler 2.0
>usb 1-5: Manufacturer: Kingston
>usb 1-5: SerialNumber: 5B771989058F
>hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0002
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-0.195.rc8.git1.fc9.i686 ohci_hcd
>usb usb3: SerialNumber: 0000:02:07.1
>hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0002
>ohci_hcd 0000:02:07.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
>hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
>modprobe used greatest stack depth: 1760 bytes left
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>uhci_hcd 0000:00:1f.2: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '004'
>hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
>uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1f.2: detected 2 ports
>uhci_hcd 0000:00:1f.2: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1f.2: Performing full reset
>uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000ff80
>usb usb4: default language 0x0409
>usb usb4: uevent
>ohci_hcd 0000:02:07.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
>usb usb4: usb_probe_device
>usb usb4: configuration #1 chosen from 1 choice
>usb 2-1: new full speed USB device using ohci_hcd and address 2
>usb usb4: adding 4-0:1.0 (config #1, interface 0)
>usb 4-0:1.0: uevent
>hub 4-0:1.0: usb_probe_interface
>hub 4-0:1.0: usb_probe_interface - got id
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 4-0:1.0: standalone hub
>hub 4-0:1.0: no power switching (usb 1.0)
>hub 4-0:1.0: individual port over-current protection
>hub 4-0:1.0: power on to power good time: 2ms
>ohci_hcd 0000:02:07.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
>hub 4-0:1.0: local power source is good
>hub 4-0:1.0: trying to enable port power on non-switchable hub
>usb 2-1: ep0 maxpacket = 8
>usb 2-1: skipped 1 descriptor after interface
>usb 2-1: skipped 1 descriptor after interface
>drivers/usb/core/inode.c: creating file '001'
>usb 2-1: default language 0x0409
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>ohci_hcd 0000:02:07.1: auto-stop root hub
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-0.195.rc8.git1.fc9.i686 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1f.2
>usb 2-1: uevent
>usb 2-1: usb_probe_device
>usb 2-1: configuration #1 chosen from 1 choice
>ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 23
>usb 2-1: adding 2-1:1.0 (config #1, interface 0)
>usb 2-1:1.0: uevent
>usbhid 2-1:1.0: usb_probe_interface
>usbhid 2-1:1.0: usb_probe_interface - got id
>PCI: Setting latency timer of device 0000:00:1f.4 to 64
>uhci_hcd 0000:00:1f.4: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '005'
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1e.0/0000:02:07.0/usb2/2-1/2-1:1.0/input/input1
>uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1f.4: detected 2 ports
>uhci_hcd 0000:00:1f.4: uhci_check_and_reset_hc: legsup = 0x2000
>uhci_hcd 0000:00:1f.4: Performing full reset
>uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000ff60
>usb usb5: default language 0x0409
>usb usb5: uevent
>input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:02:07.0-1
>usb 2-1: adding 2-1:1.1 (config #1, interface 1)
>usb 2-1:1.1: uevent
>usbhid 2-1:1.1: usb_probe_interface
>usbhid 2-1:1.1: usb_probe_interface - got id
>usb usb5: usb_probe_device
>usb usb5: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1e.0/0000:02:07.0/usb2/2-1/2-1:1.1/input/input2
>usb usb5: adding 5-0:1.0 (config #1, interface 0)
>usb 5-0:1.0: uevent
>hub 5-0:1.0: usb_probe_interface
>hub 5-0:1.0: usb_probe_interface - got id
>drivers/usb/core/file.c: looking for a minor, starting at 96
>input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:02:07.0-1
>drivers/usb/core/inode.c: creating file '002'
>usb 2-1: New USB device found, idVendor=046d, idProduct=c51a
>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1: Product: USB Receiver
>usb 2-1: Manufacturer: Logitech
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0002
>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0006
>uhci_hcd 0000:00:1f.2: port 1 portsc 01ab,00
>hub 4-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>hub 5-0:1.0: standalone hub
>hub 5-0:1.0: no power switching (usb 1.0)
>hub 5-0:1.0: individual port over-current protection
>hub 5-0:1.0: power on to power good time: 2ms
>hub 5-0:1.0: local power source is good
>hub 5-0:1.0: trying to enable port power on non-switchable hub
>hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
>drivers/usb/core/inode.c: creating file '001'
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-0.195.rc8.git1.fc9.i686 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1f.4
>usb 4-1: new low speed USB device using uhci_hcd and address 2
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>usb 4-1: skipped 1 descriptor after interface
>usb 4-1: skipped 1 descriptor after interface
>usb 4-1: default language 0x0409
>padlock: VIA PadLock not detected.
>usb 4-1: uevent
>usb 4-1: usb_probe_device
>usb 4-1: configuration #1 chosen from 1 choice
>usb 4-1: adding 4-1:1.0 (config #1, interface 0)
>usb 4-1:1.0: uevent
>usbhid 4-1:1.0: usb_probe_interface
>usbhid 4-1:1.0: usb_probe_interface - got id
>input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1f.2/usb4/4-1/4-1:1.0/input/input3
>uhci_hcd 0000:00:1f.2: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
>input,hidraw2: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1f.2-1
>usb 4-1: adding 4-1:1.1 (config #1, interface 1)
>usb 4-1:1.1: uevent
>usbhid 4-1:1.1: usb_probe_interface
>usbhid 4-1:1.1: usb_probe_interface - got id
>input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1f.2/usb4/4-1/4-1:1.1/input/input4
>uhci_hcd 0000:00:1f.2: reserve dev 2 ep82-INT, period 8, phase 4, 118 us
>input,hidraw3: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1f.2-1
>drivers/usb/core/inode.c: creating file '002'
>usb 4-1: New USB device found, idVendor=045e, idProduct=00db
>usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-1: Product: Natural® Ergonomic Keyboard 4000
>usb 4-1: Manufacturer: Microsoft
>uhci_hcd 0000:00:1f.2: port 2 portsc 01ab,00
>hub 4-0:1.0: port 2, status 0301, change 0003, 1.5 Mb/s
>padlock: VIA PadLock Hash Engine not detected.
>hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
>SCSI subsystem initialized
>usb 4-2: new low speed USB device using uhci_hcd and address 3
>Driver 'sd' needs updating - please use bus_type methods
>hub 3-0:1.0: hub_suspend
>usb usb3: bus auto-suspend
>ohci_hcd 0000:02:07.1: suspend root hub
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>usb 4-2: skipped 1 descriptor after interface
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>usb 4-2: default language 0x0409
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>usb 4-2: uevent
>usb 4-2: usb_probe_device
>usb 4-2: configuration #1 chosen from 1 choice
>usb 4-2: adding 4-2:1.0 (config #1, interface 0)
>usb 4-2:1.0: uevent
>usbhid 4-2:1.0: usb_probe_interface
>usbhid 4-2:1.0: usb_probe_interface - got id
>input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1f.2/usb4/4-2/4-2:1.0/input/input5
>ata1.00: ATA-5: ST340016A, 3.75, max UDMA/100
>ata1.00: 78165360 sectors, multi 8: LBA 
>input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1f.2-2
>drivers/usb/core/inode.c: creating file '003'
>ata1.01: ATA-5: ST340016A, 3.75, max UDMA/100
>ata1.01: 78165360 sectors, multi 8: LBA 
>usb 4-2: New USB device found, idVendor=045e, idProduct=0039
>usb 4-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
>usb 4-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
>usb 4-2: Manufacturer: Microsoft
>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0006
>uhci_hcd 0000:00:1f.4: port 1 portsc 01ab,00
>ata1.00: configured for UDMA/100
>hub 5-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s
>ata1.01: configured for UDMA/100
>hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
>usb 5-1: new low speed USB device using uhci_hcd and address 2
>usb 5-1: skipped 1 descriptor after interface
>usb 5-1: default language 0x0409
>usb 5-1: uevent
>usb 5-1: usb_probe_device
>usb 5-1: configuration #1 chosen from 1 choice
>usb 5-1: adding 5-1:1.0 (config #1, interface 0)
>usb 5-1:1.0: uevent
>usbhid 5-1:1.0: usb_probe_interface
>usbhid 5-1:1.0: usb_probe_interface - got id
>ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB03, max UDMA/33
>ata2.01: ATAPI: LITE-ON LTR-24102M, 4DS3, max UDMA/33
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      ST340016A        3.75 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>drivers/usb/core/file.c: looking for a minor, starting at 96
>hiddev97hidraw5: USB HID v1.10 Device [APC Back-UPS ES 500 FW:824.B1.D USB FW:B1] on usb-0000:00:1f.4-1
>drivers/usb/core/inode.c: creating file '002'
>usb 5-1: New USB device found, idVendor=051d, idProduct=0002
>usb 5-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>usb 5-1: Product: Back-UPS ES 500 FW:824.B1.D USB FW:B1
>usb 5-1: Manufacturer: APC
>usb 5-1: SerialNumber: 3B0623X48737  
>uhci_hcd 0000:00:1f.4: port 2 portsc 009b,00
>hub 5-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
> sda: sda1
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: Direct-Access     ATA      ST340016A        3.75 PQ: 0 ANSI: 5
>sd 0:0:1:0: [sdb] 78165360 512-byte hardware sectors (40021 MB)
>hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:1:0: [sdb] 78165360 512-byte hardware sectors (40021 MB)
>usb 5-2: new full speed USB device using uhci_hcd and address 3
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4
>sd 0:0:1:0: [sdb] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S182D SB03 PQ: 0 ANSI: 5
>scsi 1:0:1:0: CD-ROM            LITE-ON  LTR-24102M       4DS3 PQ: 0 ANSI: 5
>modprobe used greatest stack depth: 880 bytes left
>usb 5-2: not running at top speed; connect to a high speed hub
>usb 5-2: uevent
>usb 5-2: usb_probe_device
>usb 5-2: configuration #1 chosen from 1 choice
>usb 5-2: adding 5-2:1.0 (config #1, interface 0)
>usb 5-2:1.0: uevent
>hub 5-2:1.0: usb_probe_interface
>hub 5-2:1.0: usb_probe_interface - got id
>hub 5-2:1.0: USB hub found
>hub 5-2:1.0: 4 ports detected
>hub 5-2:1.0: standalone hub
>hub 5-2:1.0: individual port power switching
>hub 5-2:1.0: individual port over-current protection
>hub 5-2:1.0: Port indicators are supported
>hub 5-2:1.0: power on to power good time: 100ms
>hub 5-2:1.0: local power source is good
>hub 5-2:1.0: enabling power on all ports
>uhci_hcd 0000:00:1f.4: reserve dev 3 ep81-INT, period 128, phase 0, 12 us
>drivers/usb/core/inode.c: creating file '003'
>usb 5-2: New USB device found, idVendor=04b4, idProduct=6560
>usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 5-2:1.0: state 7 ports 4 chg 0000 evt 0000
>hub 5-2:1.0: hub_suspend
>uhci_hcd 0000:00:1f.4: release dev 3 ep81-INT, period 128, phase 0, 12 us
>usb 5-2: usb auto-suspend
>kjournald2 starting.  Commit interval 5 seconds
>EXT4-fs: mounted filesystem with ordered data mode.
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>type=1404 audit(1207393685.722:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux:8192 avtab hash slots allocated. Num of rules:170338
>SELinux:8192 avtab hash slots allocated. Num of rules:170338
>security:  8 users, 12 roles, 2284 types, 114 bools, 1 sens, 1024 cats
>security:  72 classes, 170338 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext4dev), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1207393689.367:3): policy loaded auid=4294967295 ses=4294967295
>usb usb2: uevent
>usb 2-0:1.0: uevent
>usb 2-1: uevent
>usb 2-1:1.0: uevent
>usb 2-1:1.1: uevent
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>usb 1-3: uevent
>usb 1-3:1.0: uevent
>usb 1-5: uevent
>usb 1-5:1.0: uevent
>usb usb4: uevent
>usb 4-0:1.0: uevent
>usb 4-1: uevent
>usb 4-1:1.0: uevent
>usb 4-1:1.1: uevent
>usb 4-2: uevent
>usb 4-2:1.0: uevent
>usb usb5: uevent
>usb 5-0:1.0: uevent
>usb 5-1: uevent
>usb 5-1:1.0: uevent
>usb 5-2: uevent
>usb 5-2:1.0: uevent
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 75x/40x writer cd/rw xa/form2 cdda tray
>sr 1:0:1:0: Attached scsi CD-ROM sr1
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>sr 1:0:0:0: Attached scsi generic sg2 type 5
>sr 1:0:1:0: Attached scsi generic sg3 type 5
>Intel 82802 RNG detected
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7
>ACPI: Power Button (CM) [VBTN]
>gameport: EMU10K1 is pci0000:02:09.1/gameport0, io 0xecd8, speed 978kHz
>Linux Tulip driver version 1.1.15 (Feb 27, 2007)
>ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 19 (level, low) -> IRQ 19
>tulip0:  MII transceiver #1 config 1000 status 786d advertising 05e1.
>eth0: ADMtek Comet rev 17 at MMIO 0xfe1fd800, 00:04:5a:7d:9f:01, IRQ 19.
>ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 18 (level, low) -> IRQ 18
>3c59x: Donald Becker and others.
>0000:02:0c.0: 3Com PCI 3c905C Tornado at f8f62c00.
>ACPI: PCI Interrupt 0000:02:09.2[B] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:02:09.2, OHCI version 1.10
>ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 17 (level, low) -> IRQ 17
>phy0: Selected rate control algorithm 'pid'
>firewire_core: created device fw0: GUID 00023c0021066c2c, S400
>Initializing USB Mass Storage driver...
>usb-storage 1-3:1.0: usb_probe_interface
>usb-storage 1-3:1.0: usb_probe_interface - got id
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage 1-5:1.0: usb_probe_interface
>usb-storage 1-5:1.0: usb_probe_interface - got id
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>scsi3 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>Registered led device: rt2500pci-phy0:radio
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>input: PC Speaker as /devices/platform/pcspkr/input/input8
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>FDC 0 is a post-1991 82077
>ALSA sound/pci/ac97/ac97_codec.c:2868: ac97 quirk for Dell (1028:010d)
>intel8x0_measure_ac97_clock: measured 52972 usecs
>intel8x0: measured clock 75 rejected
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 18 (level, low) -> IRQ 18
>ALSA sound/pci/emu10k1/emu10k1_main.c:1747: vendor=0x1102, device=0x4, subsystem_vendor_id=0x511102, subsystem_id=0x51
>ALSA sound/pci/emu10k1/emu10k1_main.c:1772: Sound card name=Audigy 1 [SB0090]
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>modprobe used greatest stack depth: 872 bytes left
>modprobe used greatest stack depth: 744 bytes left
>firewire_core: Unsolicited response (source ffc0, tlabel 18)
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     External AL25744_12345678      PQ: 0 ANSI: 2
>sd 2:0:0:0: [sdc] 976773169 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 1a 0c 00 00
>sd 2:0:0:0: [sdc] Assuming drive cache: write through
>sd 2:0:0:0: [sdc] 976773169 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 1a 0c 00 00
>sd 2:0:0:0: [sdc] Assuming drive cache: write through
> sdc: sdc1
>sd 2:0:0:0: [sdc] Attached SCSI disk
>sd 2:0:0:0: Attached scsi generic sg4 type 0
>usb-storage: device scan complete
>scsi 3:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
>sd 3:0:0:0: [sdd] 4030464 512-byte hardware sectors (2064 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 23 00 00 00
>sd 3:0:0:0: [sdd] Assuming drive cache: write through
>sd 3:0:0:0: [sdd] 4030464 512-byte hardware sectors (2064 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 23 00 00 00
>sd 3:0:0:0: [sdd] Assuming drive cache: write through
> sdd: sdd1
>sd 3:0:0:0: [sdd] Attached SCSI removable disk
>sd 3:0:0:0: Attached scsi generic sg5 type 0
>firewire_core: Unsolicited response (source ffc0, tlabel 12)
>firewire_core: Unsolicited response (source ffc0, tlabel c)
>device-mapper: multipath: version 1.0.5 loaded
>firewire_core: Unsolicited response (source ffc0, tlabel 6)
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>Buffer I/O error on device sdc, logical block 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 976773168
>EXT4 FS on dm-0, internal journal
>kjournald2 starting.  Commit interval 5 seconds
>EXT4 FS on dm-1, internal journal
>EXT4-fs: mounted filesystem with ordered data mode.
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>SELinux: initialized (dev dm-1, type ext4dev), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2096472k swap on /dev/sdb3.  Priority:-1 extents:1 across:2096472k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>firewire_core: Unsolicited response (source ffc0, tlabel 6)
>usb 5-2: usb auto-resume
>uhci_hcd 0000:00:1f.4: port 2 portsc 00a5,01
>usb 5-2: finish resume
>hub 5-2:1.0: hub_resume
>uhci_hcd 0000:00:1f.4: reserve dev 3 ep81-INT, period 128, phase 0, 12 us
>hub 5-2:1.0: state 7 ports 4 chg 0000 evt 0000
>usb usb3: usb auto-resume
>ohci_hcd 0000:02:07.1: resume root hub
>hub 3-0:1.0: hub_resume
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>i2c-adapter i2c-0: found SMSC47M192 or compatible, version 2, stepping A0
>ohci_hcd 0000:02:07.1: auto-stop root hub
>hub 5-2:1.0: hub_suspend
>uhci_hcd 0000:00:1f.4: release dev 3 ep81-INT, period 128, phase 0, 12 us
>usb 5-2: usb auto-suspend
>hub 3-0:1.0: hub_suspend
>usb usb3: bus auto-suspend
>ohci_hcd 0000:02:07.1: suspend root hub
>firewire_core: Unsolicited response (source ffc0, tlabel 0)
>firewire_core: Unsolicited response (source ffc0, tlabel 1b)
>firewire_core: giving up on config rom for node id ffc0
>firewire_core: Unsolicited response (source ffc0, tlabel 15)
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>uhci_hcd 0000:00:1f.4: reserve dev 2 ep81-INT, period 8, phase 4, 106 us
>uhci_hcd 0000:00:1f.4: release dev 2 ep81-INT, period 8, phase 4, 106 us
>uhci_hcd 0000:00:1f.4: reserve dev 2 ep81-INT, period 8, phase 4, 106 us
>uhci_hcd 0000:00:1f.2: reserve dev 3 ep81-INT, period 8, phase 4, 93 us
>uhci_hcd 0000:00:1f.2: release dev 3 ep81-INT, period 8, phase 4, 93 us
>uhci_hcd 0000:00:1f.2: reserve dev 3 ep81-INT, period 8, phase 4, 93 us
>uhci_hcd 0000:00:1f.2: release dev 3 ep81-INT, period 8, phase 4, 93 us
>uhci_hcd 0000:00:1f.2: reserve dev 3 ep81-INT, period 8, phase 4, 93 us
>SELinux: initialized (dev sdd1, type vfat), uses genfs_contexts
>fuse init (API version 7.9)
>SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts
>eth1:  setting full-duplex.
>eth1: no IPv6 routers present
>hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0020
>ehci_hcd 0000:02:07.2: GetStatus port 5 status 001002 POWER sig=se0 CSC
>hub 1-0:1.0: port 5, status 0100, change 0001, 12 Mb/s
>usb 1-5: USB disconnect, address 4
>usb 1-5: unregistering device
>usb 1-5: usb_disable_device nuking all URBs
>usb 1-5: unregistering interface 1-5:1.0
>usb 1-5:1.0: uevent
>usb 1-5: uevent
>hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x100
>hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0020
>ehci_hcd 0000:02:07.2: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
>hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501
>ehci_hcd 0000:02:07.2: port 5 high speed
>ehci_hcd 0000:02:07.2: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT
>usb 1-5: new high speed USB device using ehci_hcd and address 5
>ehci_hcd 0000:02:07.2: port 5 high speed
>ehci_hcd 0000:02:07.2: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT
>usb 1-5: default language 0x0409
>usb 1-5: uevent
>usb 1-5: usb_probe_device
>usb 1-5: configuration #1 chosen from 1 choice
>usb 1-5: adding 1-5:1.0 (config #1, interface 0)
>usb 1-5:1.0: uevent
>usb-storage 1-5:1.0: usb_probe_interface
>usb-storage 1-5:1.0: usb_probe_interface - got id
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 5
>usb-storage: waiting for device to settle before scanning
>drivers/usb/core/inode.c: creating file '005'
>usb 1-5: New USB device found, idVendor=13fe, idProduct=1a00
>usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-5: Product: DataTraveler 2.0
>usb 1-5: Manufacturer: Kingston
>usb 1-5: SerialNumber: 5B771989058F
>usb-storage: device scan complete
>scsi 4:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
>DROP INPUT IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:1c:b3:c3:ed:6b:08:00 SRC=0.0.0.0 DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=255 ID=31479 PROTO=UDP SPT=68 DPT=67 LEN=308 
>sd 4:0:0:0: [sdd] 4030464 512-byte hardware sectors (2064 MB)
>sd 4:0:0:0: [sdd] Write Protect is off
>sd 4:0:0:0: [sdd] Mode Sense: 23 00 00 00
>sd 4:0:0:0: [sdd] Assuming drive cache: write through
>sd 4:0:0:0: [sdd] 4030464 512-byte hardware sectors (2064 MB)
>sd 4:0:0:0: [sdd] Write Protect is off
>sd 4:0:0:0: [sdd] Mode Sense: 23 00 00 00
>sd 4:0:0:0: [sdd] Assuming drive cache: write through
> sdd: sdd1
>sd 4:0:0:0: [sdd] Attached SCSI removable disk
>sd 4:0:0:0: Attached scsi generic sg5 type 0
>SELinux: initialized (dev sdd1, type vfat), uses genfs_contexts
>hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0020
>ehci_hcd 0000:02:07.2: GetStatus port 5 status 001002 POWER sig=se0 CSC
>hub 1-0:1.0: port 5, status 0100, change 0001, 12 Mb/s
>usb 1-5: USB disconnect, address 5
>usb 1-5: unregistering device
>usb 1-5: usb_disable_device nuking all URBs
>usb 1-5: unregistering interface 1-5:1.0
>usb 1-5:1.0: uevent
>usb 1-5: uevent
>hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x100
>hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0020
>ehci_hcd 0000:02:07.2: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
>hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501
>ehci_hcd 0000:02:07.2: port 5 high speed
>ehci_hcd 0000:02:07.2: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT
>usb 1-5: new high speed USB device using ehci_hcd and address 6
>ehci_hcd 0000:02:07.2: port 5 high speed
>ehci_hcd 0000:02:07.2: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT
>usb 1-5: default language 0x0409
>usb 1-5: uevent
>usb 1-5: usb_probe_device
>usb 1-5: configuration #1 chosen from 1 choice
>usb 1-5: adding 1-5:1.0 (config #1, interface 0)
>usb 1-5:1.0: uevent
>usb-storage 1-5:1.0: usb_probe_interface
>usb-storage 1-5:1.0: usb_probe_interface - got id
>scsi5 : SCSI emulation for USB Mass Storage devices
>drivers/usb/core/inode.c: creating file '006'
>usb 1-5: New USB device found, idVendor=13fe, idProduct=1a00
>usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-5: Product: DataTraveler 2.0
>usb 1-5: Manufacturer: Kingston
>usb 1-5: SerialNumber: 5B771989058F
>usb-storage: device found at 6
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 5:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
>sd 5:0:0:0: [sdd] 4030464 512-byte hardware sectors (2064 MB)
>sd 5:0:0:0: [sdd] Write Protect is off
>sd 5:0:0:0: [sdd] Mode Sense: 23 00 00 00
>sd 5:0:0:0: [sdd] Assuming drive cache: write through
>sd 5:0:0:0: [sdd] 4030464 512-byte hardware sectors (2064 MB)
>sd 5:0:0:0: [sdd] Write Protect is off
>sd 5:0:0:0: [sdd] Mode Sense: 23 00 00 00
>sd 5:0:0:0: [sdd] Assuming drive cache: write through
> sdd: sdd1
>sd 5:0:0:0: [sdd] Attached SCSI removable disk
>sd 5:0:0:0: Attached scsi generic sg5 type 0
>SELinux: initialized (dev sdd1, type vfat), uses genfs_contexts
>SELinux: initialized (dev sdc1, type fuseblk), uses genfs_contexts
>firewire_core: skipped bus generations, destroying all nodes
>firewire_core: created device fw0: GUID 00023c0021066c2c, S400
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>firewire_core: created device fw1: GUID 0000000e00000db8, S400, 2 config ROM retries
>scsi6 : SBP-2 IEEE-1394
>firewire_sbp2: fw1.0: logged in to LUN 0000 (0 retries)
>scsi 6:0:0:0: Direct-Access-RBC Maxtor 6 L120P0                PQ: 0 ANSI: 4
>sd 6:0:0:0: [sde] 240121728 512-byte hardware sectors (122942 MB)
>sd 6:0:0:0: [sde] Write Protect is off
>sd 6:0:0:0: [sde] Mode Sense: 11 00 00 00
>sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 6:0:0:0: [sde] 240121728 512-byte hardware sectors (122942 MB)
>sd 6:0:0:0: [sde] Write Protect is off
>sd 6:0:0:0: [sde] Mode Sense: 11 00 00 00
>sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sde: sde1 sde2 sde3
>sd 6:0:0:0: [sde] Attached SCSI disk
>sd 6:0:0:0: Attached scsi generic sg6 type 14
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on sde1, internal journal
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sde1, type ext3), uses xattr
>SELinux: initialized (dev sde3, type vfat), uses genfs_contexts
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>

Actions: View

Attachments on bug 441087: 301403 | 301404 | 305911 | 307481 | 315232 | 315283 | 315306 | 315343 | 321801 | 321827 | 321870 | 322960 | 322965