Attachment 301568 Details for Bug 440025 – current /var/log/Xorg.0.log

current /var/log/Xorg.0.log

Xorg.0.log (text/plain), 25.23 KB, created by David Timms on 2008-04-07 21:14:16 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Timms

Created: 2008-04-07 21:14:16 UTC

Size: 25.23 KB

patch

obsolete

>
>X.Org X Server 1.4.99.901 (1.5.0 RC 1)
>Release Date: 5 September 2007
>X Protocol Version 11, Revision 0
>Build Operating System: Linux 2.6.18-53.1.6.el5xen i686 
>Current Operating System: Linux davidtnotebook 2.6.24.3-50.fc8 #1 SMP Thu Mar 20 14:47:10 EDT 2008 i686
>Build Date: 02 April 2008  01:07:01PM
>Build ID: xorg-x11-server 1.4.99.901-16.20080401.fc9 
>	Before reporting problems, check http://wiki.x.org
>	to make sure that you have the latest version.
>Module Loader present
>Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr  9 13:05:11 2008
>(EE) Unable to locate/open config file
>(II) Loader magic: 0x81f8460
>(II) Module ABI versions:
>	X.Org ANSI C Emulation: 0.3
>	X.Org Video Driver: 4.0
>	X.Org XInput driver : 2.0
>	X.Org Server Extension : 1.0
>	X.Org Font Renderer : 0.5
>(II) Loader running on linux
>(--) using VT number 7
>
>(--) PCI:*(0@0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xe8400000/0, 0xd0000000/0, 0xe8480000/0, I/O @ 0x00006000/0
>(--) PCI: (0@0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xe8500000/0
>(==) Matched intel for the autoconfigured driver
>New driver is "intel"
>(==) Using default built-in configuration (30 lines)
>(==) --- Start of built-in configuration ---
>	Section "Device"
>		Identifier	"Builtin Default intel Device 0"
>		Driver	"intel"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default intel Screen 0"
>		Device	"Builtin Default intel Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default fbdev Device 0"
>		Driver	"fbdev"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default fbdev Screen 0"
>		Device	"Builtin Default fbdev Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default vesa Device 0"
>		Driver	"vesa"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default vesa Screen 0"
>		Device	"Builtin Default vesa Device 0"
>	EndSection
>	Section "ServerLayout"
>		Identifier	"Builtin Default Layout"
>		Screen	"Builtin Default intel Screen 0"
>		Screen	"Builtin Default fbdev Screen 0"
>		Screen	"Builtin Default vesa Screen 0"
>	EndSection
>(==) --- End of built-in configuration ---
>(==) ServerLayout "Builtin Default Layout"
>(**) |-->Screen "Builtin Default intel Screen 0" (0)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default intel Device 0"
>(==) No monitor specified for screen "Builtin Default intel Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default fbdev Device 0"
>(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default vesa Screen 0" (2)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default vesa Device 0"
>(==) No monitor specified for screen "Builtin Default vesa Screen 0".
>	Using a default monitor configuration.
>(==) Automatically adding devices
>(==) Automatically enabling devices
>(==) No FontPath specified.  Using compiled-in default.
>(==) FontPath set to:
>	catalogue:/etc/X11/fontpath.d,
>	built-ins
>(==) ModulePath set to "/usr/lib/xorg/modules"
>(==) |-->Input Device "<default pointer>"
>(==) |-->Input Device "<default keyboard>"
>(==) The core pointer device wasn't specified explicitly in the layout.
>	Using the default mouse configuration.
>(==) The core keyboard device wasn't specified explicitly in the layout.
>	Using the default keyboard configuration.
>(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
>(II) No APM support in BIOS or kernel
>(II) System resource ranges:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) LoadModule: "extmod"
>
>(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
>(II) Module extmod: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 1.0
>(II) Loading extension SHAPE
>(II) Loading extension MIT-SUNDRY-NONSTANDARD
>(II) Loading extension BIG-REQUESTS
>(II) Loading extension SYNC
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XC-MISC
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-Misc
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension TOG-CUP
>(II) Loading extension Extended-Visual-Information
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "dbe"
>
>(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
>(II) Module dbe: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 1.0
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "glx"
>
>(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
>(II) Module glx: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 1.0
>(==) AIGLX enabled
>(==) Exporting typical set of GLX visuals
>(II) Loading extension GLX
>(II) LoadModule: "freetype"
>
>(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
>(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
>	compiled for 1.4.99.901, module version = 2.1.0
>	Module class: X.Org Font Renderer
>	ABI class: X.Org Font Renderer, version 0.5
>(II) Loading font FreeType
>(II) LoadModule: "record"
>
>(WW) Warning, couldn't open module record
>(II) UnloadModule: "record"
>(EE) Failed to load module "record" (module does not exist, 0)
>(II) LoadModule: "dri"
>
>(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
>(II) Module dri: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 1.0
>(II) Loading extension XFree86-DRI
>(II) LoadModule: "dri2"
>
>(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
>(II) Module dri2: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 1.0
>(II) Loading extension DRI2
>(II) LoadModule: "intel"
>
>(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
>(II) Module intel: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 2.2.1
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 4.0
>(II) Loading sub module "intel_master"
>(II) LoadModule: "intel_master"
>
>(II) Loading /usr/lib/xorg/modules/drivers//intel_master_drv.so
>(II) Module intel: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 2.2.1
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 4.0
>(II) LoadModule: "fbdev"
>
>(WW) Warning, couldn't open module fbdev
>(II) UnloadModule: "fbdev"
>(EE) Failed to load module "fbdev" (module does not exist, 0)
>(II) LoadModule: "vesa"
>
>(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
>(II) Module vesa: vendor="X.Org Foundation"
>	compiled for 1.4.99.2, module version = 1.3.0
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 4.0
>(II) LoadModule: "mouse"
>
>(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
>(II) Module mouse: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.3.0
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 2.0
>(II) LoadModule: "kbd"
>
>(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
>(II) Module kbd: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.3.0
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 2.0
>(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
>	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
>	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
>	965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
>(II) VESA: driver for VESA chipsets: vesa
>(II) Primary Device is: PCI 00@00:02:0
>(II) resource ranges after xf86ClaimFixedResources() call:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(WW) Falling back to old probe method for vesa
>(II) resource ranges after probing:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
>(II) Loading sub module "int10"
>(II) LoadModule: "int10"
>
>(II) Loading /usr/lib/xorg/modules//libint10.so
>(II) Module int10: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.0.0
>	ABI class: X.Org Video Driver, version 4.0
>(II) Loading sub module "vbe"
>(II) LoadModule: "vbe"
>
>(II) Loading /usr/lib/xorg/modules//libvbe.so
>(II) Module vbe: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.1.0
>	ABI class: X.Org Video Driver, version 4.0
>(II) Loading sub module "vgahw"
>(II) LoadModule: "vgahw"
>
>(II) Loading /usr/lib/xorg/modules//libvgahw.so
>(II) Module vgahw: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 0.1.0
>	ABI class: X.Org Video Driver, version 4.0
>(II) intel(0): Creating default Display subsection in Screen section
>	"Builtin Default intel Screen 0" for depth/fbbpp 24/32
>(==) intel(0): Depth 24, (==) framebuffer bpp 32
>(==) intel(0): RGB weight 888
>(==) intel(0): Default visual is TrueColor
>(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
>(--) intel(0): Chipset: "945GM"
>(--) intel(0): Linear framebuffer at 0xD0000000
>(--) intel(0): IO registers at addr 0xE8400000
>(II) intel(0): 2 display pipes available.
>(==) intel(0): Using XAA for acceleration
>(II) Loading sub module "ddc"
>(II) LoadModule: "ddc"
>(II) Module "ddc" already built-in
>(II) Loading sub module "i2c"
>(II) LoadModule: "i2c"
>(II) Module "i2c" already built-in
>(II) intel(0): Output VGA has no monitor section
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): Output LVDS has no monitor section
>(II) intel(0): I2C bus "LVDSDDC_C" initialized.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): EDID vendor "LPL", prod id 47872
>(II) Loading sub module "int10"
>(II) LoadModule: "int10"
>
>(II) Reloading /usr/lib/xorg/modules//libint10.so
>(II) intel(0): initializing int10
>(WW) intel(0): Bad V_BIOS checksum
>(II) intel(0): Primary V_BIOS segment is: 0xc000
>Failed to find device matching 0@128:2:0
>(II) intel(0): VESA BIOS detected
>(II) intel(0): VESA VBE Version 3.0
>(II) intel(0): VESA VBE Total Mem: 7872 kB
>(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
>(II) intel(0): VESA VBE OEM Software Rev: 1.0
>(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
>(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
>(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
>(II) intel(0): No SDVO device found on SDVOB
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
>(II) intel(0): No SDVO device found on SDVOC
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
>(II) intel(0): Output TV has no monitor section
>(II) intel(0): EDID vendor "LPL", prod id 47872
>(II) intel(0): Output VGA disconnected
>(II) intel(0): Output LVDS connected
>(II) intel(0): Output TV disconnected
>(II) intel(0): Using exact sizes for initial modes
>(II) intel(0): Output LVDS using initial mode 1024x768
>(II) intel(0): Monitoring connected displays enabled
>(II) intel(0): detected 256 kB GTT.
>(II) intel(0): detected 7932 kB stolen memory.
>(==) intel(0): video overlay key set to 0x101fe
>(==) intel(0): Will not try to enable page flipping
>(==) intel(0): Triple buffering disabled
>(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
>(==) intel(0): DPI set to (96, 96)
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>
>(II) Loading /usr/lib/xorg/modules//libfb.so
>(II) Module fb: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.3
>(II) Loading sub module "xaa"
>(II) LoadModule: "xaa"
>
>(II) Loading /usr/lib/xorg/modules//libxaa.so
>(II) Module xaa: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.2.0
>	ABI class: X.Org Video Driver, version 4.0
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"
>(II) Module "ramdac" already built-in
>(II) intel(0): Comparing regs from server start up to After PreInit
>(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
>(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
>(WW) intel(0): PP_STATUS after: on, ready, sequencing on
>(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00020000 to 0x00020203
>(WW) intel(0): PIPEASTAT before: status: VBLANK_INT_ENABLE
>(WW) intel(0): PIPEASTAT after: status: VBLANK_INT_ENABLE VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
>(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x8000085e to 0x800010bb
>(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00012d2d to 0x00028283
>(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00009696 to 0x00014141
>(II) UnloadModule: "vesa"
>(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
>(==) Depth 24 pixmap format is 32 bpp
>(II) do I need RAC?  No, I don't.
>(II) resource ranges after preInit:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
>(II) intel(0): Kernel reported 238848 total, 1 used
>(II) intel(0): I830CheckAvailableMemory: 955388 kB available
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 11, (OK)
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 11, (OK)
>drmOpenByBusid: Searching for BusID pci:0000:00:02.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 11, (OK)
>drmOpenByBusid: drmOpenMinor returns 11
>drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
>(II) [drm] DRM interface version 1.3
>(II) [drm] DRM open master succeeded.
>(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
>(II) intel(0): [drm] framebuffer mapped by ddx driver
>(II) intel(0): [drm] added 1 reserved context for kernel
>(II) intel(0): X context handle = 0x1
>(II) intel(0): [drm] installed DRM signal handler
>(==) intel(0): VideoRam: 262144 KB
>(**) intel(0): Framebuffer compression enabled
>(**) intel(0): Tiling enabled
>(II) intel(0): Attempting memory allocation with tiled buffers.
>(II) intel(0): Allocating 3072 scanlines for pixmap cache
>(II) intel(0): Success.
>(II) intel(0): [drm] Registers = 0xe8400000
>(II) intel(0): [drm] ring buffer = 0xd0000000
>(II) intel(0): [drm] mapped front buffer at 0xd1000000, handle = 0xd1000000
>(II) intel(0): [drm] mapped back buffer at 0xd0800000, handle = 0xd0800000
>(II) intel(0): [drm] mapped depth buffer at 0xd0c00000, handle = 0xd0c00000
>(II) intel(0): [drm] mapped classic textures at 0xd2000000, handle = 0xd2000000
>(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
>(II) intel(0): [dri] visual configs initialized
>(II) intel(0): Page Flipping disabled
>(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
>(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
>	Screen to screen bit blits
>	Solid filled rectangles
>	8x8 mono pattern filled rectangles
>	Indirect CPU to Screen color expansion
>	Solid Horizontal and Vertical Lines
>	Setting up tile and stipple cache:
>		32 128x128 slots
>		16 256x256 slots
>		6 512x512 slots
>(==) intel(0): Backing store disabled
>(==) intel(0): Silken mouse enabled
>(II) intel(0): Initializing HW Cursor
>(II) intel(0): [DRI] installation complete
>(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00800000 (pgoffset 2048)
>(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x00c00000 (pgoffset 3072)
>(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01000000 (pgoffset 4096)
>(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02000000 (pgoffset 8192)
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
>(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000003f820000 physical
>)
>(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000003fe20000 physical
>)
>(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000003fe21000 physical
>)
>(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
>(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000003fe33000 physical
>)
>(II) intel(0): 0x00634000-0x00643fff: xaa scratch (64 kB)
>(II) intel(0): 0x007bf000:            end of stolen memory
>(II) intel(0): 0x00800000-0x00bfffff: back buffer (4096 kB) X tiled
>(II) intel(0): 0x00c00000-0x00ffffff: depth buffer (4096 kB) X tiled
>(II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB) X tiled
>(II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc enabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is off
>(II) intel(0):   Display plane A is now disabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TV is connected to pipe none
>(II) intel(0): [drm] dma control initialized, using IRQ 16
>(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
>(II) intel(0): DPMS enabled
>(II) intel(0): Set up textured video
>(II) intel(0): Set up overlay video
>(II) intel(0): direct rendering: Enabled
>(--) RandR disabled
>(II) Initializing built-in extension MIT-SHM
>(II) Initializing built-in extension XInputExtension
>(II) Initializing built-in extension XTEST
>(II) Initializing built-in extension XKEYBOARD
>(II) Initializing built-in extension XINERAMA
>(II) Initializing built-in extension XFIXES
>(II) Initializing built-in extension RENDER
>(II) Initializing built-in extension RANDR
>(II) Initializing built-in extension COMPOSITE
>(II) Initializing built-in extension DAMAGE
>(II) Initializing built-in extension XEVIE
>(II) AIGLX: Screen 0 is not DRI2 capable
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 12, (OK)
>drmOpenByBusid: Searching for BusID pci:0000:00:02.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 12, (OK)
>drmOpenByBusid: drmOpenMinor returns 12
>drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
>(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
>(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
>(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
>(II) GLX: Initialized DRI GL provider for screen 0
>(II) intel(0): Setting screen physical size to 304 x 228
>(WW) <default pointer>: No Device specified, looking for one...
>(II) <default pointer>: Setting Device option to "/dev/input/mice"
>(--) <default pointer>: Device: "/dev/input/mice"
>(==) <default pointer>: Protocol: "Auto"
>(**) Option "CorePointer"
>(**) <default pointer>: always reports core events
>(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
>(**) <default pointer>: ZAxisMapping: buttons 4 and 5
>(**) <default pointer>: Buttons: 9
>(**) <default pointer>: Sensitivity: 1
>(**) Option "CoreKeyboard"
>(**) <default keyboard>: always reports core events
>(**) Option "Protocol" "standard"
>(**) <default keyboard>: Protocol: standard
>(**) Option "AutoRepeat" "500 30"
>(**) Option "XkbRules" "xorg"
>(**) <default keyboard>: XkbRules: "xorg"
>(**) Option "XkbModel" "pc105"
>(**) <default keyboard>: XkbModel: "pc105"
>(**) Option "XkbLayout" "us+inet"
>(**) <default keyboard>: XkbLayout: "us+inet"
>(**) Option "CustomKeycodes" "off"
>(**) <default keyboard>: CustomKeycodes disabled
>(II) evaluating device (<default keyboard>)
>(II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
>(II) evaluating device (<default pointer>)
>(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
>(II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
>(II) <default pointer>: ps2EnableDataReporting: succeeded
>(II) LoadModule: "synaptics"
>
>(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
>(II) Module synaptics: vendor="X.Org Foundation"
>	compiled for 4.3.99.902, module version = 1.0.0
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 2.0
>(II) Synaptics touchpad driver version 0.14.6 (1406)
>(--) SynPS/2 Synaptics TouchPad auto-dev sets device to /dev/input/event2
>(**) Option "Device" "/dev/input/event2"
>(--) SynPS/2 Synaptics TouchPad touchpad found
>(**) SynPS/2 Synaptics TouchPad: always reports core events
>(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: MOUSE)
>(--) SynPS/2 Synaptics TouchPad auto-dev sets device to /dev/input/event2
>(**) Option "Device" "/dev/input/event2"
>(--) SynPS/2 Synaptics TouchPad touchpad found
>(II) LoadModule: "evdev"
>
>(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
>(II) Module evdev: vendor="X.Org Foundation"
>	compiled for 0.0.0, module version = 1.0.0
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 2.0
>(**) Macintosh mouse button emulation: always reports core events
>(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
>(II) Macintosh mouse button emulation: Found x and y relative axes
>(II) Macintosh mouse button emulation: Found mouse buttons
>(II) Macintosh mouse button emulation: Configuring as mouse
>(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): EDID vendor "LPL", prod id 47872
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 47872
>(EE) intel(0): Mode 1280x1024 does not fit virtual size 1024x1024 - internal error
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): EDID vendor "LPL", prod id 47872
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 47872
>(EE) intel(0): Mode 1280x1024 does not fit virtual size 1024x1024 - internal error
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): EDID vendor "LPL", prod id 47872
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 47872
>(EE) intel(0): Mode 1280x1024 does not fit virtual size 1024x1024 - internal error
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): EDID vendor "LPL", prod id 47872
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): EDID vendor "LPL", prod id 47872
>(EE) intel(0): Mode 1280x1024 does not fit virtual size 1024x1024 - internal error
>(II) intel(0): fbc disabled on plane a

Actions: View

Attachments on bug 440025: 301568 | 301569 | 301570 | 350534