Attachment 301580 Details for Bug 441000 – output of dmesg

output of dmesg

dmesg.txt (text/plain), 88.61 KB, created by Matěj Cepl on 2008-04-08 00:01:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Matěj Cepl

Created: 2008-04-08 00:01:59 UTC

Size: 88.61 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-0.200.rc8.git3.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080404 (Red Hat 4.3.0-6) (GCC) ) #1 SMP Sat Apr 5 00:00:10 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f7b0000 (usable)
> BIOS-e820: 000000003f7b0000 - 000000003f7c5400 (reserved)
> BIOS-e820: 000000003f7c5400 - 000000003f7e7fb8 (ACPI NVS)
> BIOS-e820: 000000003f7e7fb8 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>119MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 260016) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   260016
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   260016
>On node 0 totalpages: 260016
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4040 pages, LIFO batch:0
>  Normal zone: 3080 pages used for memmap
>  Normal zone: 222200 pages, LIFO batch:31
>  HighMem zone: 418 pages used for memmap
>  HighMem zone: 30222 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000F7050, 0024 (r2 HP    )
>ACPI: XSDT 3F7C81C8, 007C (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: FACP 3F7C8084, 00F4 (r4 HP     30C0            3 HP          1)
>ACPI: DSDT 3F7C84CC, 12BE9 (r1 HP       nc75xx    10000 MSFT  3000001)
>ACPI: FACS 3F7E7D80, 0040
>ACPI: SLIC 3F7C8244, 0176 (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: HPET 3F7C83BC, 0038 (r1 HP     30C0            1 HP          1)
>ACPI: APIC 3F7C83F4, 0068 (r1 HP     30C0            1 HP          1)
>ACPI: MCFG 3F7C845C, 003C (r1 HP     30C0            1 HP          1)
>ACPI: TCPA 3F7C8498, 0032 (r2 HP     30C0            1 HP          1)
>ACPI: SSDT 3F7DB0B5, 0059 (r1 HP       HPQNLP        1 MSFT  3000001)
>ACPI: SSDT 3F7DB10E, 032A (r1 HP       HPQPAT        1 MSFT  3000001)
>ACPI: SSDT 3F7DBCBE, 025F (r1 HP      Cpu0Tst     3000 INTL 20060317)
>ACPI: SSDT 3F7DBF1D, 00A6 (r1 HP      Cpu1Tst     3000 INTL 20060317)
>ACPI: SSDT 3F7DBFC3, 04D7 (r1 HP        CpuPm     3000 INTL 20060317)
>ACPI: DMI detected: Hewlett-Packard
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256462
>Kernel command line: ro root=LABEL=root
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0820000 soft=c0800000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1995.040 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1024 kB
> per task-struct memory footprint: 2688 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1013244k/1040064k available (2310k kernel code, 26024k reserved, 1184k data, 568k init, 122560k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc076f000 - 0xc07fd000   ( 568 kB)
>      .data : 0xc0641919 - 0xc07699f0   (1184 kB)
>      .text : 0xc0400000 - 0xc0641919   (2310 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 3995.42 BogoMIPS (lpj=1997713)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>lockdep: fixing up alternatives.
>Booting processor 1/1 ip 4000
>CPU 1 irqstacks, hard=c0821000 soft=c0801000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3989.95 BogoMIPS (lpj=1994975)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>Total of 2 processors activated (7985.37 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=608 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=860 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=6560 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>khelper used greatest stack depth: 2920 bytes left
>net_namespace: 620 bytes
>HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
>Booting paravirtualized kernel on bare hardware
>Time:  6:39:11  Date: 04/07/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=40
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [C003] (0000:00)
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C132._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
>ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *5
>ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C140] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C141] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C142] (IRQs 10 11) *0, disabled.
>ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126]
>ACPI: Power Resource [C298] (on)
>ACPI: Power Resource [C1C2] (off)
>ACPI: Power Resource [C3B6] (off)
>ACPI: Power Resource [C3B7] (off)
>ACPI: Power Resource [C3B8] (off)
>ACPI: Power Resource [C3B9] (off)
>ACPI: Power Resource [C3BA] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 11
>hpet0: 3 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xe0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x3f7fffff could not be reserved
>system 00:09: ioport range 0x500-0x57f has been reserved
>system 00:09: ioport range 0x800-0x80f has been reserved
>system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
>system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0a: ioport range 0x1000-0x107f has been reserved
>system 00:0a: ioport range 0x1100-0x113f has been reserved
>system 00:0a: ioport range 0x1200-0x121f has been reserved
>system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved
>system 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved
>system 00:0a: iomem range 0xfed20000-0xfed3ffff could not be reserved
>system 00:0a: iomem range 0xfed45000-0xfed8ffff could not be reserved
>system 00:0a: iomem range 0xfed90000-0xfed99fff could not be reserved
>system 00:0b: iomem range 0xcee00-0xcffff has been reserved
>system 00:0b: iomem range 0xfeda0000-0xfedbffff could not be reserved
>system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: 0xe4100000-0xe41fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: 0xe4000000-0xe40fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: 2000-3fff
>  MEM window: 0xe0000000-0xe3ffffff
>  PREFETCH window: disabled.
>PCI: Bus 3, cardbus bridge: 0000:02:04.0
>  IO window: 0x00005000-0x000050ff
>  IO window: 0x00005400-0x000054ff
>  PREFETCH window: 0x50000000-0x53ffffff
>  MEM window: 0x54000000-0x57ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 5000-5fff
>  MEM window: 0xe4200000-0xe42fffff
>  PREFETCH window: 0x0000000050000000-0x0000000053ffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3280k freed
>apm: BIOS not found.
>khelper used greatest stack depth: 2788 bytes left
>audit: initializing netlink socket (disabled)
>type=2000 audit(1207550351.005:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x2f00
>pci 0000:00:1a.0: Performing full reset
>pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x2000
>pci 0000:00:1a.1: Performing full reset
>pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2f00
>pci 0000:00:1d.0: Performing full reset
>pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
>pci 0000:00:1d.1: Performing full reset
>pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
>pci 0000:00:1d.2: Performing full reset
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [C3BB] to D3
>ACPI: PNP0C0B:00 is registered as cooling_device0
>ACPI: Fan [C3BB] (off)
>ACPI: Transitioning device [C3BC] to D3
>ACPI: PNP0C0B:01 is registered as cooling_device1
>ACPI: Fan [C3BC] (off)
>ACPI: Transitioning device [C3BD] to D3
>ACPI: PNP0C0B:02 is registered as cooling_device2
>ACPI: Fan [C3BD] (off)
>ACPI: Transitioning device [C3BE] to D3
>ACPI: PNP0C0B:03 is registered as cooling_device3
>ACPI: Fan [C3BE] (off)
>ACPI: Transitioning device [C3BF] to D3
>ACPI: PNP0C0B:04 is registered as cooling_device4
>ACPI: Fan [C3BF] (off)
>ACPI: SSDT 3F7DB500, 027F (r1 HP      Cpu0Ist     3000 INTL 20060317)
>ACPI: SSDT 3F7DB804, 04BA (r1 HP      Cpu0Cst     3001 INTL 20060317)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 3F7DB438, 00C8 (r1 HP      Cpu1Ist     3000 INTL 20060317)
>ACPI: SSDT 3F7DB77F, 0085 (r1 HP      Cpu1Cst     3000 INTL 20060317)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:01 is registered as cooling_device6
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [TZ0] (56 C)
>ACPI: LNXTHERM:02 is registered as thermal_zone1
>ACPI: Thermal Zone [TZ1] (52 C)
>ACPI: LNXTHERM:03 is registered as thermal_zone2
>ACPI: Thermal Zone [TZ3] (37 C)
>ACPI: LNXTHERM:04 is registered as thermal_zone3
>ACPI: Thermal Zone [TZ4] (28 C)
>ACPI: LNXTHERM:05 is registered as thermal_zone4
>ACPI: Thermal Zone [TZ5] (63 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 965GM Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>Yenta: CardBus bridge found at 0000:02:04.0 [103c:30c0]
>Yenta: ISA IRQ mask 0x04b8, PCI irq 16
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
>pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>cs: IO port probe 0x5000-0x5fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xe4200000 - 0xe42fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>PNP: PS/2 Controller [PNP0303:C295,PNP0f13:C296] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio4/input0
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2
>cpuidle: using governor menu
>Marking TSC unstable due to: TSC halts in idle.
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 4:279:670
>Freeing unused kernel memory: 568k freed
>Write protecting the kernel read-only data: 948k
>ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4
>ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
>ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: supports USB remote wakeup
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4500000
>ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: default language 0x0409
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: Single TT
>hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.200.rc8.git3.fc9.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
>ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
>ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4508000
>ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: default language 0x0409
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: individual port over-current protection
>hub 2-0:1.0: Single TT
>hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
>hub 2-0:1.0: power on to power good time: 20ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
>drivers/usb/core/inode.c: creating file '001'
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-0.200.rc8.git3.fc9.i686 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>modprobe used greatest stack depth: 1880 bytes left
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 64 td 64
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '003'
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: detected 2 ports
>uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1a.0: Performing full reset
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004020
>usb usb3: default language 0x0409
>usb usb3: uevent
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>usb 3-0:1.0: uevent
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: individual port over-current protection
>hub 3-0:1.0: power on to power good time: 2ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:1a.7: port 1 full speed --> companion
>ehci_hcd 0000:00:1a.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT
>hub 1-0:1.0: port 1 not reset yet, waiting 50ms
>ehci_hcd 0000:00:1a.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
>hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
>hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0002
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-0.200.rc8.git3.fc9.i686 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>uhci_hcd 0000:00:1a.0: port 1 portsc 0093,00
>hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '004'
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: detected 2 ports
>uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1a.1: Performing full reset
>uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004040
>usb usb4: default language 0x0409
>usb usb4: uevent
>usb usb4: usb_probe_device
>usb usb4: configuration #1 chosen from 1 choice
>usb usb4: adding 4-0:1.0 (config #1, interface 0)
>usb 4-0:1.0: uevent
>hub 4-0:1.0: usb_probe_interface
>hub 4-0:1.0: usb_probe_interface - got id
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 4-0:1.0: standalone hub
>hub 4-0:1.0: no power switching (usb 1.0)
>hub 4-0:1.0: individual port over-current protection
>hub 4-0:1.0: power on to power good time: 2ms
>hub 4-0:1.0: local power source is good
>hub 4-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-0.200.rc8.git3.fc9.i686 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '005'
>hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: detected 2 ports
>uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.0: Performing full reset
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060
>usb usb5: default language 0x0409
>usb usb5: uevent
>usb usb5: usb_probe_device
>usb usb5: configuration #1 chosen from 1 choice
>usb usb5: adding 5-0:1.0 (config #1, interface 0)
>usb 5-0:1.0: uevent
>hub 5-0:1.0: usb_probe_interface
>hub 5-0:1.0: usb_probe_interface - got id
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>hub 5-0:1.0: standalone hub
>hub 5-0:1.0: no power switching (usb 1.0)
>hub 5-0:1.0: individual port over-current protection
>hub 5-0:1.0: power on to power good time: 2ms
>hub 5-0:1.0: local power source is good
>hub 5-0:1.0: trying to enable port power on non-switchable hub
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>drivers/usb/core/inode.c: creating file '001'
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-0.200.rc8.git3.fc9.i686 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '006'
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: detected 2 ports
>uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.1: Performing full reset
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004080
>usb usb6: default language 0x0409
>usb usb6: uevent
>usb usb6: usb_probe_device
>usb usb6: configuration #1 chosen from 1 choice
>usb usb6: adding 6-0:1.0 (config #1, interface 0)
>usb 6-0:1.0: uevent
>hub 6-0:1.0: usb_probe_interface
>hub 6-0:1.0: usb_probe_interface - got id
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>hub 6-0:1.0: standalone hub
>hub 6-0:1.0: no power switching (usb 1.0)
>hub 6-0:1.0: individual port over-current protection
>hub 6-0:1.0: power on to power good time: 2ms
>hub 6-0:1.0: local power source is good
>hub 6-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25-0.200.rc8.git3.fc9.i686 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '007'
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: detected 2 ports
>uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.2: Performing full reset
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
>usb usb7: default language 0x0409
>usb usb7: uevent
>usb usb7: usb_probe_device
>usb usb7: configuration #1 chosen from 1 choice
>usb usb7: adding 7-0:1.0 (config #1, interface 0)
>usb 7-0:1.0: uevent
>hub 7-0:1.0: usb_probe_interface
>hub 7-0:1.0: usb_probe_interface - got id
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>hub 7-0:1.0: standalone hub
>hub 7-0:1.0: no power switching (usb 1.0)
>hub 7-0:1.0: individual port over-current protection
>hub 7-0:1.0: power on to power good time: 2ms
>hub 7-0:1.0: local power source is good
>hub 7-0:1.0: trying to enable port power on non-switchable hub
>usb 3-1: skipped 1 descriptor after interface
>usb 3-1: default language 0x0409
>usb 3-1: uevent
>usb 3-1: usb_probe_device
>usb 3-1: configuration #1 chosen from 1 choice
>usb 3-1: adding 3-1:1.0 (config #1, interface 0)
>usb 3-1:1.0: uevent
>usb 3-1: adding 3-1:1.1 (config #1, interface 1)
>usb 3-1:1.1: uevent
>usb 3-1: adding 3-1:1.2 (config #1, interface 2)
>usb 3-1:1.2: uevent
>usb 3-1: adding 3-1:1.3 (config #1, interface 3)
>usb 3-1:1.3: uevent
>drivers/usb/core/inode.c: creating file '002'
>usb 3-1: New USB device found, idVendor=03f0, idProduct=171d
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: HP Integrated Module
>usb 3-1: Manufacturer: Broadcom Corp
>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25-0.200.rc8.git3.fc9.i686 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.2
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.2: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
>ata1.00: ATA-7: FUJITSU MHW2160BH PL, 891F, max UDMA/100
>ata1.00: 312581808 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L632M, 0917, max MWDMA2
>usb usb4: suspend_rh (auto-stop)
>usb usb5: suspend_rh (auto-stop)
>usb usb6: suspend_rh (auto-stop)
>ata2.00: configured for MWDMA2
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2160B 891F PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-L632M 0917 PQ: 0 ANSI: 5
>modprobe used greatest stack depth: 1164 bytes left
>usb usb7: suspend_rh (auto-stop)
>hub 2-0:1.0: hub_suspend
>usb usb2: bus auto-suspend
>ehci_hcd 0000:00:1d.7: suspend root hub
>hub 1-0:1.0: hub_suspend
>usb usb1: bus auto-suspend
>ehci_hcd 0000:00:1a.7: suspend root hub
>hub 4-0:1.0: hub_suspend
>usb usb4: bus auto-suspend
>usb usb4: suspend_rh
>hub 5-0:1.0: hub_suspend
>usb usb5: bus auto-suspend
>usb usb5: suspend_rh
>hub 6-0:1.0: hub_suspend
>usb usb6: bus auto-suspend
>usb usb6: suspend_rh
>hub 7-0:1.0: hub_suspend
>usb usb7: bus auto-suspend
>usb usb7: suspend_rh
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>EXT4-fs: INFO: recovery required on readonly filesystem.
>EXT4-fs: write access will be enabled during recovery.
>kjournald2 starting.  Commit interval 5 seconds
>EXT4-fs: dm-0: orphan cleanup on readonly fs
>ext4_orphan_cleanup: deleting unreferenced inode 2123920
>EXT4-fs: dm-0: 1 orphan inode deleted
>EXT4-fs: recovery complete.
>EXT4-fs: mounted filesystem with ordered data mode.
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>type=1404 audit(1207550362.850:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux:8192 avtab hash slots allocated. Num of rules:171017
>SELinux:8192 avtab hash slots allocated. Num of rules:171017
>security:  8 users, 12 roles, 2290 types, 115 bools, 1 sens, 1024 cats
>security:  72 classes, 171017 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext4dev), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1207550363.791:3): policy loaded auid=4294967295 ses=4294967295
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb 3-1: uevent
>usb 3-1:1.0: uevent
>usb 3-1:1.1: uevent
>usb 3-1:1.2: uevent
>usb 3-1:1.3: uevent
>usb usb4: uevent
>usb 4-0:1.0: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>usb usb5: uevent
>usb 5-0:1.0: uevent
>usb usb6: uevent
>usb 6-0:1.0: uevent
>usb usb7: uevent
>usb 7-0:1.0: uevent
>usb usb2: uevent
>usb 2-0:1.0: uevent
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>input: PC Speaker as /devices/platform/pcspkr/input/input3
>tg3.c:v3.88 (March 20, 2008)
>ACPI: PCI Interrupt 0000:18:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:18:00.0 to 64
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1a:4b:5b:07:46
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>ACPI: AC Adapter [C236] (on-line)
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
>ACPI: Sleep Button (CM) [C2C0]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
>ACPI: Lid Switch [C153]
>ACPI: Battery Slot [C238] (battery present)
>ACPI: WMI: Mapper loaded
>ACPI: Battery Slot [C237] (battery absent)
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
>iwl3945: Copyright(c) 2003-2008 Intel Corporation
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:10:00.0 to 64
>iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>[drm] Initialized drm 1.1.0 20060810
>ACPI: device:02 is registered as cooling_device7
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input7
>ACPI: Video Device [C098] (multi-head: yes  rom: no  post: no)
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.12.0 20071122 on minor 0
>Bluetooth: HCI USB driver ver 2.9
>hci_usb 3-1:1.0: usb_probe_interface
>hci_usb 3-1:1.0: usb_probe_interface - got id
>hci_usb 3-1:1.2: usb_probe_interface
>hci_usb 3-1:1.2: usb_probe_interface - got id
>hci_usb 3-1:1.3: usb_probe_interface
>hci_usb 3-1:1.3: usb_probe_interface - got id
>usbcore: registered new interface driver hci_usb
>ACPI: PCI interrupt for device 0000:10:00.0 disabled
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x3
>ALSA sound/pci/hda/hda_codec.c:2236: hda_codec: model 'hp' is selected for config 103c:0 (HP nx)
>Clocksource tsc unstable (delta = -68462351 ns)
>padlock: VIA PadLock not detected.
>padlock: VIA PadLock Hash Engine not detected.
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT4 FS on dm-0, internal journal
>mount used greatest stack depth: 1128 bytes left
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on dm-6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-6, type ext3), uses xattr
>Adding 2031608k swap on /dev/mapper/vg00-lvSwap.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Loading iSCSI transport class v2.0-869.
>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>warning: `mcstransd' uses 32-bit capabilities (legacy support in use)
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>usb usb7: usb auto-resume
>usb usb7: wakeup_rh
>hub 7-0:1.0: hub_resume
>hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
>usb usb6: usb auto-resume
>usb usb6: wakeup_rh
>hub 6-0:1.0: hub_resume
>hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
>usb usb5: usb auto-resume
>usb usb5: wakeup_rh
>hub 5-0:1.0: hub_resume
>hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>usb usb4: usb auto-resume
>usb usb4: wakeup_rh
>hub 4-0:1.0: hub_resume
>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>usb usb2: usb auto-resume
>ehci_hcd 0000:00:1d.7: resume root hub
>hub 2-0:1.0: hub_resume
>hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
>usb usb1: usb auto-resume
>ehci_hcd 0000:00:1a.7: resume root hub
>hub 1-0:1.0: hub_resume
>hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0000
>usb usb7: suspend_rh (auto-stop)
>usb usb6: suspend_rh (auto-stop)
>usb usb5: suspend_rh (auto-stop)
>usb usb4: suspend_rh (auto-stop)
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>hub 4-0:1.0: hub_suspend
>usb usb4: bus auto-suspend
>usb usb4: suspend_rh
>hub 2-0:1.0: hub_suspend
>usb usb2: bus auto-suspend
>ehci_hcd 0000:00:1d.7: suspend root hub
>hub 7-0:1.0: hub_suspend
>usb usb7: bus auto-suspend
>usb usb7: suspend_rh
>hub 6-0:1.0: hub_suspend
>usb usb6: bus auto-suspend
>usb usb6: suspend_rh
>hub 5-0:1.0: hub_suspend
>usb usb5: bus auto-suspend
>usb usb5: suspend_rh
>hub 1-0:1.0: hub_suspend
>usb usb1: bus auto-suspend
>ehci_hcd 0000:00:1a.7: suspend root hub
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
>uhci_hcd 0000:00:1a.0: reserve dev 2 ep83-ISO, period 1, phase 0, 22 us
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>virbr0: starting userspace STP failed, starting kernel STP
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>virbr0: no IPv6 routers present
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: RX authentication from 00:19:5b:22:28:44 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:19:5b:22:28:44
>wlan0: RX AssocResp from 00:19:5b:22:28:44 (capab=0x471 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:19:5b:22:28:44)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present
>prelink used greatest stack depth: 1028 bytes left
>online-prefs-sy[3130]: segfault at 0 ip 00472ec7 sp bfae19b4 error 4 in libglib-2.0.so.0.1600.2[419000+de000]
>wlan0: disassociate(reason=3)
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: RX authentication from 00:19:5b:22:28:44 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:19:5b:22:28:44
>wlan0: RX AssocResp from 00:19:5b:22:28:44 (capab=0x471 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:19:5b:22:28:44)
>wlan0: disassociate(reason=3)
>wlan0: RX disassociation from 00:19:5b:22:28:44 (reason=7)
>wlan0: RX disassociation from 00:19:5b:22:28:44 (reason=7)
>wlan0: RX disassociation from 00:19:5b:22:28:44 (reason=7)
>wlan0: RX disassociation from 00:19:5b:22:28:44 (reason=7)
>wlan0: RX disassociation from 00:19:5b:22:28:44 (reason=7)
>wlan0: RX disassociation from 00:19:5b:22:28:44 (reason=7)
>wlan0: RX disassociation from 00:19:5b:22:28:44 (reason=7)
>wlan0: RX disassociation from 00:19:5b:22:28:44 (reason=7)
>wlan0: RX disassociation from 00:19:5b:22:28:44 (reason=7)
>wlan0: RX disassociation from 00:19:5b:22:28:44 (reason=7)
>wlan0: RX disassociation from 00:19:5b:22:28:44 (reason=7)
>wlan0: RX disassociation from 00:19:5b:22:28:44 (reason=7)
>wlan0: RX disassociation from 00:19:5b:22:28:44 (reason=7)
>wlan0: RX disassociation from 00:19:5b:22:28:44 (reason=7)
>wlan0: RX disassociation from 00:19:5b:22:28:44 (reason=7)
>wlan0: RX disassociation from 00:19:5b:22:28:44 (reason=7)
>wlan0: RX disassociation from 00:19:5b:22:28:44 (reason=7)
>wlan0: RX disassociation from 00:19:5b:22:28:44 (reason=7)
>wlan0: RX disassociation from 00:19:5b:22:28:44 (reason=7)
>wlan0: associate with AP 00:19:5b:22:28:44
>wlan0: RX ReassocResp from 00:19:5b:22:28:44 (capab=0x471 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:19:5b:22:28:44)
>wlan0: disassociate(reason=3)
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: RX authentication from 00:19:5b:22:28:44 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:19:5b:22:28:44
>wlan0: authentication frame received from 00:19:5b:22:28:44, but not in authenticate state - ignored
>wlan0: RX ReassocResp from 00:19:5b:22:28:44 (capab=0x471 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:19:5b:22:28:44)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>tun0: Disabled Privacy Extensions
>IN=tun0 OUT= MAC= SRC=10.11.255.93 DST=10.32.4.76 LEN=40 TOS=0x00 PREC=0x00 TTL=59 ID=0 DF PROTO=TCP SPT=5222 DPT=50083 WINDOW=0 RES=0x00 RST URGP=0 
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>IN= OUT=wlan0 SRC=192.168.1.3 DST=147.202.86.254 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=63637 DF PROTO=TCP SPT=44918 DPT=80 WINDOW=140 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=147.202.77.254 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=18485 DF PROTO=TCP SPT=58426 DPT=80 WINDOW=284 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.176.220 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=8765 DF PROTO=TCP SPT=40830 DPT=80 WINDOW=3374 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.176.220 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=8766 DF PROTO=TCP SPT=40830 DPT=80 WINDOW=3374 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.176.220 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=8767 DF PROTO=TCP SPT=40830 DPT=80 WINDOW=3374 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.176.220 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=8768 DF PROTO=TCP SPT=40830 DPT=80 WINDOW=3374 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.176.220 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=8769 DF PROTO=TCP SPT=40830 DPT=80 WINDOW=3374 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.176.220 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=8770 DF PROTO=TCP SPT=40830 DPT=80 WINDOW=3374 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.176.220 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=8771 DF PROTO=TCP SPT=40830 DPT=80 WINDOW=3374 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=147.202.86.254 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=63638 DF PROTO=TCP SPT=44918 DPT=80 WINDOW=140 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=147.202.77.254 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=18486 DF PROTO=TCP SPT=58426 DPT=80 WINDOW=284 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.176.220 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=8772 DF PROTO=TCP SPT=40830 DPT=80 WINDOW=3374 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.176.220 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=8773 DF PROTO=TCP SPT=40830 DPT=80 WINDOW=3374 RES=0x00 ACK PSH FIN URGP=0 
>firefox used greatest stack depth: 956 bytes left
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.176.220 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=8774 DF PROTO=TCP SPT=40830 DPT=80 WINDOW=3374 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=205.234.175.175 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10189 DF PROTO=TCP SPT=37495 DPT=80 WINDOW=302 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=205.234.175.175 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10190 DF PROTO=TCP SPT=37495 DPT=80 WINDOW=302 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=64.40.118.51 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=12841 DF PROTO=TCP SPT=40423 DPT=80 WINDOW=110 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=80.239.229.234 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=3268 DF PROTO=TCP SPT=45191 DPT=80 WINDOW=134 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=77.67.112.29 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=42664 DF PROTO=TCP SPT=59986 DPT=80 WINDOW=125 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=205.234.175.175 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10191 DF PROTO=TCP SPT=37495 DPT=80 WINDOW=302 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=64.40.118.51 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=12842 DF PROTO=TCP SPT=40423 DPT=80 WINDOW=110 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=77.67.112.29 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=42665 DF PROTO=TCP SPT=59986 DPT=80 WINDOW=125 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=80.239.229.234 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=3269 DF PROTO=TCP SPT=45191 DPT=80 WINDOW=134 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=64.40.118.51 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=12843 DF PROTO=TCP SPT=40423 DPT=80 WINDOW=110 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=205.234.175.175 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10192 DF PROTO=TCP SPT=37495 DPT=80 WINDOW=302 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=77.67.112.29 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=42666 DF PROTO=TCP SPT=59986 DPT=80 WINDOW=125 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=80.239.229.234 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=3270 DF PROTO=TCP SPT=45191 DPT=80 WINDOW=134 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=64.40.118.51 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=12844 DF PROTO=TCP SPT=40423 DPT=80 WINDOW=110 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=77.67.112.29 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=42667 DF PROTO=TCP SPT=59986 DPT=80 WINDOW=125 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=80.239.229.234 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=3271 DF PROTO=TCP SPT=45191 DPT=80 WINDOW=134 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=205.234.175.175 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10193 DF PROTO=TCP SPT=37495 DPT=80 WINDOW=302 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=64.40.118.51 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=12845 DF PROTO=TCP SPT=40423 DPT=80 WINDOW=110 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=77.67.112.29 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=42668 DF PROTO=TCP SPT=59986 DPT=80 WINDOW=125 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=80.239.229.234 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=3272 DF PROTO=TCP SPT=45191 DPT=80 WINDOW=134 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=205.234.175.175 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10194 DF PROTO=TCP SPT=37495 DPT=80 WINDOW=302 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=64.40.118.51 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=12846 DF PROTO=TCP SPT=40423 DPT=80 WINDOW=110 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=77.67.112.29 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=42669 DF PROTO=TCP SPT=59986 DPT=80 WINDOW=125 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=80.239.229.234 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=3273 DF PROTO=TCP SPT=45191 DPT=80 WINDOW=134 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=205.234.175.175 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10195 DF PROTO=TCP SPT=37495 DPT=80 WINDOW=302 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=64.40.118.51 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=12847 DF PROTO=TCP SPT=40423 DPT=80 WINDOW=110 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=77.67.112.29 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=42670 DF PROTO=TCP SPT=59986 DPT=80 WINDOW=125 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=80.239.229.234 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=3274 DF PROTO=TCP SPT=45191 DPT=80 WINDOW=134 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=64.40.118.51 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=12848 DF PROTO=TCP SPT=40423 DPT=80 WINDOW=110 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=205.234.175.175 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10196 DF PROTO=TCP SPT=37495 DPT=80 WINDOW=302 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=77.67.112.29 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=42671 DF PROTO=TCP SPT=59986 DPT=80 WINDOW=125 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=80.239.229.234 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=3275 DF PROTO=TCP SPT=45191 DPT=80 WINDOW=134 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=64.40.118.51 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=12849 DF PROTO=TCP SPT=40423 DPT=80 WINDOW=110 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=205.234.175.175 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=10197 DF PROTO=TCP SPT=37495 DPT=80 WINDOW=302 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=77.67.112.29 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=42672 DF PROTO=TCP SPT=59986 DPT=80 WINDOW=125 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=80.239.229.234 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=3276 DF PROTO=TCP SPT=45191 DPT=80 WINDOW=134 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=129.143.116.10 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=26877 DF PROTO=TCP SPT=51216 DPT=80 WINDOW=129 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=593 DF PROTO=TCP SPT=46211 DPT=80 WINDOW=218 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=192.150.18.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=35220 DF PROTO=TCP SPT=44205 DPT=80 WINDOW=131 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=129.143.116.10 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=26878 DF PROTO=TCP SPT=51216 DPT=80 WINDOW=129 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=594 DF PROTO=TCP SPT=46211 DPT=80 WINDOW=218 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=192.150.18.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=35221 DF PROTO=TCP SPT=44205 DPT=80 WINDOW=131 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=129.143.116.10 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=26879 DF PROTO=TCP SPT=51216 DPT=80 WINDOW=129 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=595 DF PROTO=TCP SPT=46211 DPT=80 WINDOW=218 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=192.150.18.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=35222 DF PROTO=TCP SPT=44205 DPT=80 WINDOW=131 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=129.143.116.10 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=26880 DF PROTO=TCP SPT=51216 DPT=80 WINDOW=129 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=596 DF PROTO=TCP SPT=46211 DPT=80 WINDOW=218 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=129.143.116.10 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=26881 DF PROTO=TCP SPT=51216 DPT=80 WINDOW=129 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=597 DF PROTO=TCP SPT=46211 DPT=80 WINDOW=218 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=192.150.18.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=35223 DF PROTO=TCP SPT=44205 DPT=80 WINDOW=131 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=129.143.116.10 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=26882 DF PROTO=TCP SPT=51216 DPT=80 WINDOW=129 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=598 DF PROTO=TCP SPT=46211 DPT=80 WINDOW=218 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=192.150.18.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=35224 DF PROTO=TCP SPT=44205 DPT=80 WINDOW=131 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=129.143.116.10 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=26883 DF PROTO=TCP SPT=51216 DPT=80 WINDOW=129 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=599 DF PROTO=TCP SPT=46211 DPT=80 WINDOW=218 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=192.150.18.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=35225 DF PROTO=TCP SPT=44205 DPT=80 WINDOW=131 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=129.143.116.10 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=26884 DF PROTO=TCP SPT=51216 DPT=80 WINDOW=129 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=600 DF PROTO=TCP SPT=46211 DPT=80 WINDOW=218 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=192.150.18.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=35226 DF PROTO=TCP SPT=44205 DPT=80 WINDOW=131 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=129.143.116.10 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=26885 DF PROTO=TCP SPT=51216 DPT=80 WINDOW=129 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=601 DF PROTO=TCP SPT=46211 DPT=80 WINDOW=218 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=192.150.18.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=35227 DF PROTO=TCP SPT=44205 DPT=80 WINDOW=131 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=129.143.116.10 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=26886 DF PROTO=TCP SPT=51216 DPT=80 WINDOW=129 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=602 DF PROTO=TCP SPT=46211 DPT=80 WINDOW=218 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=192.150.18.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=35228 DF PROTO=TCP SPT=44205 DPT=80 WINDOW=131 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=lo SRC=127.0.0.1 DST=127.0.0.1 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=49963 DF PROTO=TCP SPT=35011 DPT=37228 WINDOW=536 RES=0x00 ACK RST URGP=0 
>IN= OUT=lo SRC=127.0.0.1 DST=127.0.0.1 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=21467 DF PROTO=TCP SPT=42501 DPT=53654 WINDOW=536 RES=0x00 ACK RST URGP=0 
>IN= OUT=lo SRC=127.0.0.1 DST=127.0.0.1 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=16077 DF PROTO=TCP SPT=47760 DPT=52729 WINDOW=536 RES=0x00 ACK RST URGP=0 
>IN= OUT=lo SRC=127.0.0.1 DST=127.0.0.1 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=56573 DF PROTO=TCP SPT=50476 DPT=46302 WINDOW=536 RES=0x00 ACK RST URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=44797 DF PROTO=TCP SPT=39901 DPT=80 WINDOW=120 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47341 DF PROTO=TCP SPT=39905 DPT=80 WINDOW=597 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=62811 DF PROTO=TCP SPT=39900 DPT=80 WINDOW=429 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=57311 DF PROTO=TCP SPT=39902 DPT=80 WINDOW=134 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=1228 DF PROTO=TCP SPT=39903 DPT=80 WINDOW=471 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=43888 DF PROTO=TCP SPT=39904 DPT=80 WINDOW=471 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=44798 DF PROTO=TCP SPT=39901 DPT=80 WINDOW=120 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=57312 DF PROTO=TCP SPT=39902 DPT=80 WINDOW=134 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=62812 DF PROTO=TCP SPT=39900 DPT=80 WINDOW=429 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=1229 DF PROTO=TCP SPT=39903 DPT=80 WINDOW=471 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=43889 DF PROTO=TCP SPT=39904 DPT=80 WINDOW=471 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47342 DF PROTO=TCP SPT=39905 DPT=80 WINDOW=597 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=44799 DF PROTO=TCP SPT=39901 DPT=80 WINDOW=120 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=57313 DF PROTO=TCP SPT=39902 DPT=80 WINDOW=134 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=62813 DF PROTO=TCP SPT=39900 DPT=80 WINDOW=429 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=1230 DF PROTO=TCP SPT=39903 DPT=80 WINDOW=471 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=43890 DF PROTO=TCP SPT=39904 DPT=80 WINDOW=471 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47343 DF PROTO=TCP SPT=39905 DPT=80 WINDOW=597 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=44800 DF PROTO=TCP SPT=39901 DPT=80 WINDOW=120 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=57314 DF PROTO=TCP SPT=39902 DPT=80 WINDOW=134 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=62814 DF PROTO=TCP SPT=39900 DPT=80 WINDOW=429 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=1231 DF PROTO=TCP SPT=39903 DPT=80 WINDOW=471 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=43891 DF PROTO=TCP SPT=39904 DPT=80 WINDOW=471 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47344 DF PROTO=TCP SPT=39905 DPT=80 WINDOW=597 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=44801 DF PROTO=TCP SPT=39901 DPT=80 WINDOW=120 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=57315 DF PROTO=TCP SPT=39902 DPT=80 WINDOW=134 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=62815 DF PROTO=TCP SPT=39900 DPT=80 WINDOW=429 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=1232 DF PROTO=TCP SPT=39903 DPT=80 WINDOW=471 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=43892 DF PROTO=TCP SPT=39904 DPT=80 WINDOW=471 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47345 DF PROTO=TCP SPT=39905 DPT=80 WINDOW=597 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=44802 DF PROTO=TCP SPT=39901 DPT=80 WINDOW=120 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=57316 DF PROTO=TCP SPT=39902 DPT=80 WINDOW=134 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=62816 DF PROTO=TCP SPT=39900 DPT=80 WINDOW=429 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=1233 DF PROTO=TCP SPT=39903 DPT=80 WINDOW=471 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=43893 DF PROTO=TCP SPT=39904 DPT=80 WINDOW=471 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47346 DF PROTO=TCP SPT=39905 DPT=80 WINDOW=597 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=44803 DF PROTO=TCP SPT=39901 DPT=80 WINDOW=120 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=57317 DF PROTO=TCP SPT=39902 DPT=80 WINDOW=134 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=62817 DF PROTO=TCP SPT=39900 DPT=80 WINDOW=429 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=1234 DF PROTO=TCP SPT=39903 DPT=80 WINDOW=471 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=43894 DF PROTO=TCP SPT=39904 DPT=80 WINDOW=471 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47347 DF PROTO=TCP SPT=39905 DPT=80 WINDOW=597 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=44804 DF PROTO=TCP SPT=39901 DPT=80 WINDOW=120 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=57318 DF PROTO=TCP SPT=39902 DPT=80 WINDOW=134 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=62818 DF PROTO=TCP SPT=39900 DPT=80 WINDOW=429 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=1235 DF PROTO=TCP SPT=39903 DPT=80 WINDOW=471 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=43895 DF PROTO=TCP SPT=39904 DPT=80 WINDOW=471 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47348 DF PROTO=TCP SPT=39905 DPT=80 WINDOW=597 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=44805 DF PROTO=TCP SPT=39901 DPT=80 WINDOW=120 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=57319 DF PROTO=TCP SPT=39902 DPT=80 WINDOW=134 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=62819 DF PROTO=TCP SPT=39900 DPT=80 WINDOW=429 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=1236 DF PROTO=TCP SPT=39903 DPT=80 WINDOW=471 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=43896 DF PROTO=TCP SPT=39904 DPT=80 WINDOW=471 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.177.132 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47349 DF PROTO=TCP SPT=39905 DPT=80 WINDOW=597 RES=0x00 ACK PSH FIN URGP=0 
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>  domain 1: span 00000003
>   groups: 00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>  domain 1: span 00000003
>   groups: 00000003
>Monitor-Mwait will be used to enter C-3 state
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>IN= OUT=lo SRC=127.0.0.1 DST=127.0.0.1 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47065 DF PROTO=TCP SPT=58398 DPT=41382 WINDOW=536 RES=0x00 ACK RST URGP=0 
>IN= OUT=lo SRC=127.0.0.1 DST=127.0.0.1 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=14450 DF PROTO=TCP SPT=39235 DPT=45024 WINDOW=536 RES=0x00 ACK RST URGP=0 
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>  domain 1: span 00000003
>   groups: 00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>  domain 1: span 00000003
>   groups: 00000003
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>  domain 1: span 00000003
>   groups: 00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>  domain 1: span 00000003
>   groups: 00000003
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>IN= OUT=lo SRC=127.0.0.1 DST=127.0.0.1 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=65239 DF PROTO=TCP SPT=48873 DPT=37492 WINDOW=536 RES=0x00 ACK RST URGP=0 
>IN= OUT=lo SRC=127.0.0.1 DST=127.0.0.1 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=5889 DF PROTO=TCP SPT=34159 DPT=40155 WINDOW=536 RES=0x00 ACK RST URGP=0 
>IN= OUT=lo SRC=127.0.0.1 DST=127.0.0.1 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=4214 DF PROTO=TCP SPT=36193 DPT=52051 WINDOW=536 RES=0x00 ACK RST URGP=0 
>IN= OUT=lo SRC=127.0.0.1 DST=127.0.0.1 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=51896 DF PROTO=TCP SPT=35629 DPT=45589 WINDOW=536 RES=0x00 ACK RST URGP=0 
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: RX authentication from 00:19:5b:22:28:44 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:19:5b:22:28:44
>wlan0: RX AssocResp from 00:19:5b:22:28:44 (capab=0x471 status=0 aid=1)
>wlan0: associated
>wlan0: disassociate(reason=3)
>
>=======================================================
>[ INFO: possible circular locking dependency detected ]
>2.6.25-0.200.rc8.git3.fc9.i686 #1
>-------------------------------------------------------
>modprobe/8624 is trying to acquire lock:
> ((name)){--..}, at: [<c04379b2>] flush_workqueue+0x0/0x85
>
>but task is already holding lock:
> (rtnl_mutex){--..}, at: [<c05d178c>] rtnl_lock+0xf/0x11
>
>which lock already depends on the new lock.
>
>
>the existing dependency chain (in reverse order) is:
>
>-> #2 (rtnl_mutex){--..}:
>       [<c0446430>] __lock_acquire+0xa99/0xc11
>       [<c0446612>] lock_acquire+0x6a/0x90
>       [<c063c431>] mutex_lock_nested+0xdb/0x271
>       [<c05d178c>] rtnl_lock+0xf/0x11
>       [<f8b3a08a>] sta_info_debugfs_add_work+0xee/0x107 [mac80211]
>       [<c0437174>] run_workqueue+0xd3/0x1a1
>       [<c04372f8>] worker_thread+0xb6/0xc2
>       [<c0439efa>] kthread+0x3b/0x61
>       [<c0406a0b>] kernel_thread_helper+0x7/0x10
>       [<ffffffff>] 0xffffffff
>
>-> #1 (&local->sta_debugfs_add){--..}:
>       [<c0446430>] __lock_acquire+0xa99/0xc11
>       [<c0446612>] lock_acquire+0x6a/0x90
>       [<c043716e>] run_workqueue+0xcd/0x1a1
>       [<c04372f8>] worker_thread+0xb6/0xc2
>       [<c0439efa>] kthread+0x3b/0x61
>       [<c0406a0b>] kernel_thread_helper+0x7/0x10
>       [<ffffffff>] 0xffffffff
>
>-> #0 ((name)){--..}:
>       [<c044634f>] __lock_acquire+0x9b8/0xc11
>       [<c0446612>] lock_acquire+0x6a/0x90
>       [<c04379f6>] flush_workqueue+0x44/0x85
>       [<f8b3740a>] ieee80211_stop+0x276/0x331 [mac80211]
>       [<c05c9fdd>] dev_close+0x52/0x6f
>       [<c05ca072>] rollback_registered+0x78/0xf8
>       [<c05ca129>] unregister_netdevice+0x37/0x66
>       [<f8b42556>] __ieee80211_if_del+0x15/0x18 [mac80211]
>       [<f8b3627f>] ieee80211_unregister_hw+0x68/0x11c [mac80211]
>       [<f8b21031>] iwl3945_pci_remove+0x2c9/0x360 [iwl3945]
>       [<c050ab44>] pci_device_remove+0x19/0x39
>       [<c056ef67>] __device_release_driver+0x78/0x96
>       [<c056f037>] driver_detach+0xb2/0xf0
>       [<c056e480>] bus_remove_driver+0x63/0x89
>       [<c056f49c>] driver_unregister+0x2a/0x2e
>       [<c050acfe>] pci_unregister_driver+0x21/0x5a
>       [<f8b210e4>] iwl3945_exit+0x1c/0x23 [iwl3945]
>       [<c044e21b>] sys_delete_module+0x1a2/0x1db
>       [<c0405d2e>] syscall_call+0x7/0xb
>       [<ffffffff>] 0xffffffff
>
>other info that might help us debug this:
>
>1 lock held by modprobe/8624:
> #0:  (rtnl_mutex){--..}, at: [<c05d178c>] rtnl_lock+0xf/0x11
>
>stack backtrace:
>Pid: 8624, comm: modprobe Not tainted 2.6.25-0.200.rc8.git3.fc9.i686 #1
> [<c0445781>] print_circular_bug_tail+0x5b/0x66
> [<c04455f4>] ? print_circular_bug_entry+0x39/0x43
> [<c044634f>] __lock_acquire+0x9b8/0xc11
> [<c0446612>] lock_acquire+0x6a/0x90
> [<c04379b2>] ? flush_workqueue+0x0/0x85
> [<c04379f6>] flush_workqueue+0x44/0x85
> [<c04379b2>] ? flush_workqueue+0x0/0x85
> [<f8b3740a>] ieee80211_stop+0x276/0x331 [mac80211]
> [<c063da5e>] ? _spin_unlock_bh+0x25/0x28
> [<c05c9fdd>] dev_close+0x52/0x6f
> [<c05ca072>] rollback_registered+0x78/0xf8
> [<c05ca129>] unregister_netdevice+0x37/0x66
> [<f8b42556>] __ieee80211_if_del+0x15/0x18 [mac80211]
> [<f8b3627f>] ieee80211_unregister_hw+0x68/0x11c [mac80211]
> [<f8b21031>] iwl3945_pci_remove+0x2c9/0x360 [iwl3945]
> [<c050ab44>] pci_device_remove+0x19/0x39
> [<c056ef67>] __device_release_driver+0x78/0x96
> [<c056f037>] driver_detach+0xb2/0xf0
> [<c056e480>] bus_remove_driver+0x63/0x89
> [<c056f49c>] driver_unregister+0x2a/0x2e
> [<c050acfe>] pci_unregister_driver+0x21/0x5a
> [<f8b210e4>] iwl3945_exit+0x1c/0x23 [iwl3945]
> [<c044e21b>] sys_delete_module+0x1a2/0x1db
> [<c045fab7>] ? audit_syscall_entry+0xf9/0x123
> [<c0405d2e>] syscall_call+0x7/0xb
> =======================
>ACPI: PCI interrupt for device 0000:10:00.0 disabled
>ACPI: PCI interrupt for device 0000:18:00.0 disabled
>mac80211: Unknown symbol wiphy_register
>mac80211: Unknown symbol wiphy_new
>mac80211: Unknown symbol wiphy_unregister
>mac80211: Unknown symbol ieee80211_radiotap_iterator_init
>mac80211: Unknown symbol __ieee80211_get_channel
>mac80211: Unknown symbol ieee80211_radiotap_iterator_next
>mac80211: Unknown symbol ieee80211_channel_to_frequency
>mac80211: Unknown symbol ieee80211_frequency_to_channel
>mac80211: Unknown symbol wiphy_free
>iwl3945: Unknown symbol ieee80211_free_hw
>iwl3945: Unknown symbol ieee80211_alloc_hw
>iwl3945: Unknown symbol ieee80211_register_hw
>iwl3945: Unknown symbol ieee80211_rate_control_unregister
>iwl3945: Unknown symbol __ieee80211_get_radio_led_name
>iwl3945: Unknown symbol ieee80211_wake_queue
>iwl3945: Unknown symbol __ieee80211_get_tx_led_name
>iwl3945: Unknown symbol ieee80211_tx_status_irqsafe
>iwl3945: Unknown symbol __ieee80211_get_rx_led_name
>iwl3945: Unknown symbol ieee80211_rate_control_register
>iwl3945: Unknown symbol sta_info_get
>iwl3945: Unknown symbol ieee80211_start_queues
>iwl3945: Unknown symbol ieee80211_stop_queue
>iwl3945: Unknown symbol ieee80211_stop_queues
>iwl3945: Unknown symbol ieee80211_get_hdrlen
>iwl3945: Unknown symbol __ieee80211_get_assoc_led_name
>iwl3945: Unknown symbol ieee80211_scan_completed
>iwl3945: Unknown symbol ieee80211_channel_to_frequency
>iwl3945: Unknown symbol ieee80211_unregister_hw
>iwl3945: Unknown symbol ieee80211_beacon_get
>iwl3945: Unknown symbol ieee80211_rx_irqsafe
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
>iwl3945: Copyright(c) 2003-2008 Intel Corporation
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:10:00.0 to 64
>iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>tg3.c:v3.88 (March 20, 2008)
>ACPI: PCI Interrupt 0000:18:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:18:00.0 to 64
>eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1a:4b:5b:07:46
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>PM: Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.06 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s)
>drm_sysfs_suspend
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>uhci_hcd 0000:00:1a.0: release dev 2 ep83-ISO, period 1, phase 0, 22 us
>uhci_hcd 0000:00:1a.0: release dev 2 ep81-INT, period 1, phase 0, 23 us
>usb 3-1: usb suspend
>hub 3-0:1.0: hub_suspend
>usb usb3: bus suspend
>usb usb3: suspend_rh
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ehci_hcd 0000:00:1d.7: --> PCI D3/wakeup
>uhci_hcd 0000:00:1d.2: uhci_suspend
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>uhci_hcd 0000:00:1d.2: --> PCI D0/legacy
>uhci_hcd 0000:00:1d.1: uhci_suspend
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>uhci_hcd 0000:00:1d.1: --> PCI D0/legacy
>uhci_hcd 0000:00:1d.0: uhci_suspend
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>uhci_hcd 0000:00:1d.0: --> PCI D0/legacy
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>ehci_hcd 0000:00:1a.7: --> PCI D3/wakeup
>uhci_hcd 0000:00:1a.1: uhci_suspend
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>uhci_hcd 0000:00:1a.1: --> PCI D0/legacy
>uhci_hcd 0000:00:1a.0: uhci_suspend
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>uhci_hcd 0000:00:1a.0: --> PCI D0/legacy
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU 1 is now offline
>lockdep: fixing up alternatives.
>SMP alternatives: switching to UP code
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>CPU1 is down
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>Enabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>lockdep: fixing up alternatives.
>SMP alternatives: switching to SMP code
>Booting processor 1/1 ip 4000
>CPU 1 irqstacks, hard=c0821000 soft=c0801000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.04 BogoMIPS (lpj=1995022)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>Switched to high resolution mode on CPU 1
>CPU1 is up
>APIC error on CPU1: 00(40)
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>uhci_hcd 0000:00:1a.0: PCI legacy resume
>PCI: Enabling device 0000:00:1a.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: uhci_resume
>uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0018
>uhci_hcd 0000:00:1a.0: Performing full reset
>usb usb3: root hub lost power or was reset
>usb usb3: suspend_rh
>uhci_hcd 0000:00:1a.1: PCI legacy resume
>PCI: Enabling device 0000:00:1a.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: uhci_resume
>uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0008
>uhci_hcd 0000:00:1a.1: Performing full reset
>usb usb4: root hub lost power or was reset
>usb usb4: suspend_rh
>ehci_hcd 0000:00:1a.7: PCI D0, from previous PCI D3
>PCI: Enabling device 0000:00:1a.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>uhci_hcd 0000:00:1d.0: PCI legacy resume
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: uhci_resume
>uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0008
>uhci_hcd 0000:00:1d.0: Performing full reset
>usb usb5: root hub lost power or was reset
>usb usb5: suspend_rh
>uhci_hcd 0000:00:1d.1: PCI legacy resume
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: uhci_resume
>uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0008
>uhci_hcd 0000:00:1d.1: Performing full reset
>usb usb6: root hub lost power or was reset
>usb usb6: suspend_rh
>uhci_hcd 0000:00:1d.2: PCI legacy resume
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: uhci_resume
>uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0008
>uhci_hcd 0000:00:1d.2: Performing full reset
>usb usb7: root hub lost power or was reset
>usb usb7: suspend_rh
>ehci_hcd 0000:00:1d.7: PCI D0, from previous PCI D3
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata2.01: _GTF evaluation failed (AE 0x1001)
>ata1.01: _GTF evaluation failed (AE 0x1001)
>usb usb3: usb resume
>usb usb3: wakeup_rh
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>hub 3-0:1.0: logical disconnect on port 1
>usb usb4: usb resume
>usb usb4: wakeup_rh
>hub 4-0:1.0: trying to enable port power on non-switchable hub
>usb usb5: usb resume
>usb usb5: wakeup_rh
>hub 5-0:1.0: trying to enable port power on non-switchable hub
>usb usb6: usb resume
>usb usb6: wakeup_rh
>hub 6-0:1.0: trying to enable port power on non-switchable hub
>usb usb7: usb resume
>usb usb7: wakeup_rh
>hub 7-0:1.0: trying to enable port power on non-switchable hub
>ata2.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
>ata2.00: ACPI cmd ef/03:20:00:00:00:a0 filtered out
>sd 0:0:0:0: [sda] Starting disk
>ata2.00: configured for MWDMA2
>usb usb4: suspend_rh (auto-stop)
>usb usb5: suspend_rh (auto-stop)
>usb usb6: suspend_rh (auto-stop)
>usb usb7: suspend_rh (auto-stop)
>ata1.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>PM: Finishing wakeup.
>Restarting tasks ... <7>hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0002
>uhci_hcd 0000:00:1a.0: port 1 portsc 008a,00
>hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
>usb 3-1: USB disconnect, address 2
>usb 3-1: unregistering device
>usb 3-1: usb_disable_device nuking all URBs
>usb 3-1: unregistering interface 3-1:1.0
>done.
>usb 3-1:1.0: uevent
>usb 3-1: unregistering interface 3-1:1.1
>usb 3-1:1.1: uevent
>usb 3-1: unregistering interface 3-1:1.2
>usb 3-1:1.2: uevent
>usb 3-1: unregistering interface 3-1:1.3
>usb 3-1:1.3: uevent
>usb 3-1: uevent
>hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
>usb usb1: usb resume
>ehci_hcd 0000:00:1a.7: resume root hub
>hub 1-0:1.0: hub_resume
>hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0000
>ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
>hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
>ehci_hcd 0000:00:1a.7: port 1 full speed --> companion
>ehci_hcd 0000:00:1a.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT
>hub 1-0:1.0: port 1 not reset yet, waiting 50ms
>ehci_hcd 0000:00:1a.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
>hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0002
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
>uhci_hcd 0000:00:1a.0: port 1 portsc 0093,00
>hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
>hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
>usb 3-1: new full speed USB device using uhci_hcd and address 3
>hub 3-0:1.0: port 1 not reset yet, waiting 50ms
>usb 3-1: skipped 1 descriptor after interface
>usb 3-1: default language 0x0409
>usb 3-1: uevent
>usb 3-1: usb_probe_device
>usb 3-1: configuration #1 chosen from 1 choice
>usb 3-1: adding 3-1:1.0 (config #1, interface 0)
>usb 3-1:1.0: uevent
>hci_usb 3-1:1.0: usb_probe_interface
>hci_usb 3-1:1.0: usb_probe_interface - got id
>usb 3-1: adding 3-1:1.1 (config #1, interface 1)
>usb 3-1:1.1: uevent
>usb 3-1: adding 3-1:1.2 (config #1, interface 2)
>usb 3-1:1.2: uevent
>hci_usb 3-1:1.2: usb_probe_interface
>hci_usb 3-1:1.2: usb_probe_interface - got id
>usb 3-1: adding 3-1:1.3 (config #1, interface 3)
>usb 3-1:1.3: uevent
>hci_usb 3-1:1.3: usb_probe_interface
>hci_usb 3-1:1.3: usb_probe_interface - got id
>drivers/usb/core/inode.c: creating file '003'
>usb 3-1: New USB device found, idVendor=03f0, idProduct=171d
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: HP Integrated Module
>usb 3-1: Manufacturer: Broadcom Corp
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
>uhci_hcd 0000:00:1a.0: reserve dev 3 ep81-INT, period 1, phase 0, 23 us
>uhci_hcd 0000:00:1a.0: reserve dev 3 ep83-ISO, period 1, phase 0, 22 us
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>PCI: Enabling device 0000:10:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>hub 4-0:1.0: hub_suspend
>usb usb4: bus auto-suspend
>usb usb4: suspend_rh
>hub 5-0:1.0: hub_suspend
>usb usb5: bus auto-suspend
>usb usb5: suspend_rh
>hub 6-0:1.0: hub_suspend
>usb usb6: bus auto-suspend
>usb usb6: suspend_rh
>hub 7-0:1.0: hub_suspend
>usb usb7: bus auto-suspend
>usb usb7: suspend_rh
>hub 1-0:1.0: hub_suspend
>usb usb1: bus auto-suspend
>ehci_hcd 0000:00:1a.7: suspend root hub

Actions: View

Attachments on bug 441000: 301350 | 301580 | 302843 | 302844