Attachment 301692 Details for Bug 439685 – /var/log/dmesg after booting 2.4.24-69.fc8

/var/log/dmesg after booting 2.4.24-69.fc8

dmesg.txt (text/plain), 17.28 KB, created by Erhard Kroeger on 2008-04-08 19:27:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Erhard Kroeger

Created: 2008-04-08 19:27:03 UTC

Size: 17.28 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.4-69.fc8 (mockbuild@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Wed Apr 2 11:34:56 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
> BIOS-e820: 000000001bef0000 - 000000001beff000 (ACPI data)
> BIOS-e820: 000000001beff000 - 000000001bf00000 (ACPI NVS)
> BIOS-e820: 000000001bf00000 - 000000001c000000 (reserved)
> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>446MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 114416) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   114416
>  HighMem    114416 ->   114416
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   114416
>On node 0 totalpages: 114416
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 861 pages used for memmap
>  Normal zone: 109459 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F7290, 0014 (r0 PTLTD )
>ACPI: RSDT 1BEF8B70, 0030 (r1 PTLTD    RSDT    6040000  LTP        0)
>ACPI: FACP 1BEFEE2B, 0074 (r1 ATI    Raptor    6040000 ATI     F4240)
>ACPI: DSDT 1BEF8BA0, 628B (r1    ATI U1_M1535  6040000 MSFT  100000D)
>ACPI: FACS 1BEFFFC0, 0040
>ACPI: BOOT 1BEFEE9F, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>ACPI: SSDT 1BEFEEC7, 0139 (r1 PTLTD  POWERNOW  6040000  LTP        1)
>ACPI: DMI detected: Hewlett-Packard
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x8008
>Allocating PCI resources starting at 20000000 (gap: 1c000000:e3fc0000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000
>swsusp: Registered nosave memory region: 00000000000d0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113523
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffb000 (0138d000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07bb000 soft=c079b000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1855.168 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 444824k/457664k available (2237k kernel code, 12212k reserved, 1131k data, 288k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xdc800000 - 0xff7fe000   ( 559 MB)
>    lowmem  : 0xc0000000 - 0xdbef0000   ( 446 MB)
>      .init : 0xc0750000 - 0xc0798000   ( 288 kB)
>      .data : 0xc062f789 - 0xc074a724   (1131 kB)
>      .text : 0xc0400000 - 0xc062f789   (2237 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3711.45 BogoMIPS (lpj=1855726)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: After all inits, caps: 0383f1ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0e28)
>CPU0: AMD mobile AMD Athlon(tm) XP2500+ stepping 00
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 64 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 15:54:34  Date: 04/08/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd87b, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 8000-803f claimed by ali7101 ACPI
>PCI quirk: region 8040-805f claimed by ali7101 SMB
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 *10)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 7 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *10)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 7 11) *10
>ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 10)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7)
>ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 6 10) *9
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>system 00:07: ioport range 0x40b-0x40b has been reserved
>system 00:07: ioport range 0x480-0x48f has been reserved
>system 00:07: ioport range 0x4d0-0x4d1 has been reserved
>system 00:07: ioport range 0x4d6-0x4d6 has been reserved
>system 00:07: ioport range 0x8000-0x807f could not be reserved
>system 00:07: ioport range 0xff00-0xff01 has been reserved
>system 00:07: ioport range 0x8004-0x8005 has been reserved
>system 00:07: ioport range 0xfe00-0xfefe has been reserved
>system 00:07: iomem range 0xd0400000-0xd0400fff has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: d0100000-d01fffff
>  PREFETCH window: e0000000-efffffff
>PCI: Bus 2, cardbus bridge: 0000:00:0a.0
>  IO window: 00001000-000010ff
>  IO window: 00001400-000014ff
>  PREFETCH window: 20000000-23ffffff
>  MEM window: 24000000-27ffffff
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3654k freed
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1207670074.487:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key CB8A02B4689BE5F0
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb.
>Activating ISA DMA hang workarounds.
>Boot video device is 0000:01:05.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Thermal Zone [THRM] (62 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected Ati IGP320/M chipset
>agpgart: AGP aperture is 64M @ 0xd4000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3
>PCI: setting IRQ 3 as level-triggered
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKG] -> GSI 3 (level, low) -> IRQ 3
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:00:0a.0 [0000:0000]
>Yenta O2: res at 0x94/0xD4: 00/ea
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x04b8, PCI irq 11
>Socket status: 30000007
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor ladder
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>atkbd.c: Unknown key pressed (translated set 2, code 0xee on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xee on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known.
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
>powernow: No PST tables match this cpuid (0x7a0)
>powernow: This is indicative of a broken BIOS.
>powernow: Trying ACPI perflib
>powernow: Minimum speed 530 MHz. Maximum speed 1855 MHz.
>powernow-k8: Processor cpuid 6a0 not supported
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 4:70:942
>Freeing unused kernel memory: 288k freed
>Write protecting the kernel read-only data: 894k
>Marking TSC unstable due to: TSC halts in idle.
>Time: acpi_pm clocksource has been installed.
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKU] -> GSI 10 (level, low) -> IRQ 10
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 10, io mem 0xd0004000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: Unable to derive IRQ for device 0000:00:10.0
>scsi0 : pata_ali
>scsi1 : pata_ali
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8080 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8088 irq 15
>usb 1-1: new low speed USB device using ohci_hcd and address 2
>ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD4A, max UDMA/100
>ata1.00: 117210240 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>usb 1-1: configuration #1 chosen from 1 choice
>input: HID 062a:0000 as /class/input/input3
>input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:02.0-1
>ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, 0C29, max MWDMA2
>usb 1-2: new full speed USB device using ohci_hcd and address 3
>ata2.00: configured for MWDMA2
>scsi 0:0:0:0: Direct-Access     ATA      IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4241N 0C29 PQ: 0 ANSI: 5
>usb 1-2: configuration #1 chosen from 1 choice
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1207670089.154:2): selinux=0 auid=4294967295
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>PCI: Enabling device 0000:00:11.0 (0000 -> 0001)
>ALi_M1535: initialized. timeout=60 sec (nowayout=0)
>alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
>alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
>input: PC Speaker as /class/input/input4
>natsemi dp8381x driver, version 2.1, Sept 11, 2006
>  originally by Donald Becker <becker@scyld.com>
>  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>natsemi eth0: NatSemi DP8381[56] at 0xd0008000 (0000:00:12.0), 00:0b:cd:7a:44:8f, IRQ 11, port TP.
>FDC 0 is a post-1991 82077
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
>alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
>firewire_ohci: Added fw-ohci device 0000:00:0c.0, OHCI version 1.10
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>input: Lid Switch as /class/input/input7
>ACPI: Lid Switch [LID]
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>firewire_core: created device fw0: GUID 000bcd009e34c31d, S400
>input: Video Bus as /class/input/input8
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>phy0: Selected rate control algorithm 'pid'
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5
>Registered led device: rt73usb-phy0:radio
>Registered led device: rt73usb-phy0:assoc
>Registered led device: rt73usb-phy0:quality
>usbcore: registered new interface driver rt73usb
>ALSA sound/pci/ac97/ac97_codec.c:2054: AC'97 1 does not respond - RESET
>ALSA sound/pci/ac97/ac97_codec.c:2063: AC'97 1 access is not valid [0xffffffff], removing mixer.
>ALSA sound/pci/ali5451/ali5451.c:1927: ali mixer 1 creating error.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.28.0 20060524 on minor 0
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 917496k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:917496k

Actions: View

Attachments on bug 439685: 301691 | 301692 | 301693 | 302035 | 302069 | 304361