Attachment 301755 Details for Bug 440408 – dmesg generated from Dell E520, BIOS 2.4.0, kernel 2.6.24.4-64

dmesg generated from Dell E520, BIOS 2.4.0, kernel 2.6.24.4-64

dmesg.txt (text/plain), 34.22 KB, created by Marc Wilson on 2008-04-09 06:55:23 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Marc Wilson

Created: 2008-04-09 06:55:23 UTC

Size: 34.22 KB

patch

obsolete

>Linux version 2.6.24.4-64.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sat Mar 29 09:54:46 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fe51c00 (usable)
> BIOS-e820: 000000007fe51c00 - 000000007fe53c00 (ACPI NVS)
> BIOS-e820: 000000007fe55c00 - 000000007fe57c00 (ACPI data)
> BIOS-e820: 000000007fe57c00 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fe710
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 523857) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   523857
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   523857
>On node 0 totalpages: 523857
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2300 pages used for memmap
>  HighMem zone: 292181 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FEBF0, 0024 (r2 DELL  )
>ACPI: XSDT 000FD086, 0064 (r1 DELL    B8K           14 ASL        61)
>ACPI: FACP 000FD1A6, 00F4 (r3 DELL    B8K           14 ASL        61)
>ACPI: DSDT FFFD642B, 33DC (r1   DELL    dt_ex     1000 INTL 20050624)
>ACPI: FACS 7FE51C00, 0040
>ACPI: SSDT FFFD9AE5, 009C (r1   DELL    st_ex     1000 INTL 20050624)
>ACPI: APIC 000FD29A, 0092 (r1 DELL    B8K           14 ASL        61)
>ACPI: BOOT 000FD32C, 0028 (r1 DELL    B8K           14 ASL        61)
>ACPI: MCFG 000FD354, 003E (r1 DELL    B8K           14 ASL        61)
>ACPI: HPET 000FD392, 0038 (r1 DELL    B8K           14 ASL        61)
>ACPI: DUMY 7FE55C00, 0024 (r1 DELL    B8K           14 ASL        61)
>ACPI: SLIC 000FD3CA, 0176 (r1 DELL    B8K           14 ASL        61)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>swsusp: Registered nosave memory region: 000000000009b000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519765
>Kernel command line: ro root=LABEL=/ rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07bb000 soft=c079b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2128.050 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2069424k/2095428k available (2237k kernel code, 24780k reserved, 1131k data, 288k init, 1177924k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0750000 - 0xc0798000   ( 288 kB)
>      .data : 0xc062f789 - 0xc074a724   (1131 kB)
>      .text : 0xc0400000 - 0xc062f789   (2237 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4258.57 BogoMIPS (lpj=2129285)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07bc000 soft=c079c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4256.00 BogoMIPS (lpj=2128000)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz stepping 06
>Total of 2 processors activated (8514.57 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>net_namespace: 64 bytes
>Dell E520 series board detected. Selecting BIOS-method for reboots.
>Booting paravirtualized kernel on bare hardware
>Time:  6:05:33  Date: 04/09/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb7f3, last bus=3
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: DMI System Vendor: Dell Inc.                
>ACPI: DMI Product Name: Dell DM061                   
>ACPI: DMI Product Version: 
>ACPI: DMI Board Name: 0WG864
>ACPI: DMI BIOS Vendor: Dell Inc.                
>ACPI: DMI BIOS Date: 05/24/2007
>ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
>ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnpacpi: exceeded the max number of IO resources. Max:40 Found:40
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>system 00:01: ioport range 0x800-0x85f has been reserved
>system 00:01: ioport range 0xc00-0xc7f has been reserved
>system 00:01: ioport range 0x860-0x8ff could not be reserved
>system 00:06: iomem range 0x0-0x9ffff could not be reserved
>system 00:06: iomem range 0x100000-0xffffff could not be reserved
>system 00:06: iomem range 0x1000000-0x7fe51bff could not be reserved
>system 00:06: iomem range 0xf0000-0xfffff could not be reserved
>system 00:06: iomem range 0xc0000-0xd7fff could not be reserved
>system 00:06: iomem range 0xfec00000-0xfecfffff could not be reserved
>system 00:06: iomem range 0xfee00000-0xfeefffff could not be reserved
>system 00:06: iomem range 0xffb00000-0xffbfffff could not be reserved
>system 00:06: iomem range 0xffc00000-0xffffffff could not be reserved
>system 00:07: ioport range 0x100-0x1fe has been reserved
>system 00:07: ioport range 0x200-0x277 has been reserved
>system 00:07: ioport range 0x280-0x2e7 has been reserved
>system 00:07: ioport range 0x2e8-0x2ef has been reserved
>system 00:07: ioport range 0x2f0-0x2f7 has been reserved
>system 00:07: ioport range 0x2f8-0x2ff has been reserved
>system 00:07: ioport range 0x300-0x377 has been reserved
>system 00:07: ioport range 0x380-0x3bb has been reserved
>system 00:07: ioport range 0x3c0-0x3e7 could not be reserved
>system 00:07: ioport range 0x3f6-0x3f7 has been reserved
>system 00:07: ioport range 0x400-0x4cf has been reserved
>system 00:07: ioport range 0x4d2-0x57f has been reserved
>system 00:07: ioport range 0x580-0x677 has been reserved
>system 00:07: ioport range 0x680-0x777 has been reserved
>system 00:07: ioport range 0x780-0x7bb has been reserved
>system 00:07: ioport range 0x7c0-0x7ff has been reserved
>system 00:07: ioport range 0x8e0-0x8ff has been reserved
>system 00:07: ioport range 0x900-0x9fe has been reserved
>system 00:07: ioport range 0xa00-0xafe has been reserved
>system 00:07: ioport range 0xb00-0xbfe has been reserved
>system 00:07: ioport range 0xc80-0xcaf has been reserved
>system 00:07: ioport range 0xcb0-0xcbf has been reserved
>system 00:07: ioport range 0xcc0-0xcf7 has been reserved
>system 00:07: ioport range 0xd00-0xdfe has been reserved
>system 00:07: ioport range 0xe00-0xefe has been reserved
>system 00:07: ioport range 0xf00-0xffe has been reserved
>system 00:07: ioport range 0x2000-0x20fe has been reserved
>system 00:07: ioport range 0x2100-0x21fe has been reserved
>system 00:07: ioport range 0x2200-0x22fe has been reserved
>system 00:07: ioport range 0x2300-0x23fe has been reserved
>system 00:07: ioport range 0x2400-0x24fe has been reserved
>system 00:07: ioport range 0x2500-0x25fe has been reserved
>system 00:07: ioport range 0x2600-0x26fe has been reserved
>system 00:07: ioport range 0x2700-0x27fe has been reserved
>system 00:07: ioport range 0x2800-0x28fe has been reserved
>system 00:07: ioport range 0x2900-0x29fe has been reserved
>system 00:07: ioport range 0x2a00-0x2afe has been reserved
>system 00:07: ioport range 0x2b00-0x2bfe has been reserved
>system 00:07: ioport range 0x2c00-0x2cfe has been reserved
>system 00:07: ioport range 0x2d00-0x2dfe has been reserved
>system 00:07: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:07: iomem range 0xfeda0000-0xfedacfff has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: d000-dfff
>  MEM window: dd000000-dfefffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: dcf00000-dcffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-cfff
>  MEM window: dcd00000-dcefffff
>  PREFETCH window: 88000000-880fffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2971k freed
>Simple Boot Flag at 0x7a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1207721133.661:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key A149FFC6EE301D40
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 4:808:63
>Freeing unused kernel memory: 288k freed
>Write protecting the kernel read-only data: 894k
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 17, io mem 0xdfffbc00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 18, io mem 0xff980800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 19, io base 0x0000ff00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000ff80
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000ff40
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 21
>ahci 0000:00:1f.2: nr_ports (6) and implemented port map (0x33) don't match, using nr_ports
>ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x3f
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>hub 3-2:1.0: USB hub found
>hub 3-2:1.0: 7 ports detected
>usb 6-1: new full speed USB device using uhci_hcd and address 2
>usb 6-1: configuration #1 chosen from 1 choice
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 221
>ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 221
>ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 221
>ata4: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970280 irq 221
>ata5: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970300 irq 221
>ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 221
>usb 6-2: new low speed USB device using uhci_hcd and address 3
>usb 6-2: configuration #1 chosen from 1 choice
>input: USBPS2 as /class/input/input1
>input,hidraw0: USB HID v1.00 Keyboard [USBPS2] on usb-0000:00:1d.1-2
>input: USBPS2 as /class/input/input2
>input,hidraw1: USB HID v1.00 Mouse [USBPS2] on usb-0000:00:1d.1-2
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: ST3250820AS, 3.ADG, max UDMA/133
>ata1.00: 488281250 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>usb 7-1: new low speed USB device using uhci_hcd and address 2
>usb 7-1: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input3
>input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-1
>usb 3-2.1: new full speed USB device using uhci_hcd and address 3
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>usb 3-2.1: configuration #1 chosen from 1 choice
>ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-H653A, D500, max UDMA/33
>ata2.00: applying bridge limits
>usb 3-2.2: new full speed USB device using uhci_hcd and address 4
>ata2.00: configured for UDMA/33
>usb 3-2.2: configuration #1 chosen from 1 choice
>usb 3-2.4: new low speed USB device using uhci_hcd and address 5
>ata3: SATA link down (SStatus 0 SControl 0)
>usb 3-2.4: device descriptor read/64, error -71
>usb 3-2.4: device descriptor read/64, error -71
>ata4: SATA link down (SStatus 0 SControl 0)
>usb 3-2.4: new low speed USB device using uhci_hcd and address 6
>usb 3-2.4: device descriptor read/64, error -71
>usb 3-2.4: device descriptor read/64, error -71
>ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133
>ata5.00: 488397168 sectors, multi 0: LBA48 
>ata5.00: configured for UDMA/133
>usb 3-2.4: new low speed USB device using uhci_hcd and address 7
>ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>usb 3-2.4: device not accepting address 7, error -71
>usb 3-2.4: new low speed USB device using uhci_hcd and address 8
>ata6.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB03, max UDMA/33, ATAPI AN
>ata6.00: applying bridge limits
>ata6.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      ST3250820AS      3.AD PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-H653A D500 PQ: 0 ANSI: 5
>scsi 4:0:0:0: Direct-Access     ATA      WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
>sd 4:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 4:0:0:0: [sdb] Attached SCSI disk
>scsi 5:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S183L SB03 PQ: 0 ANSI: 5
>usb 3-2.4: device not accepting address 8, error -71
>usb 3-2.7: new full speed USB device using uhci_hcd and address 9
>usb 3-2.7: configuration #1 chosen from 1 choice
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1207721143.170:2): enforcing=1 old_enforcing=0 auid=4294967295
>SELinux:8192 avtab hash slots allocated.Num of rules:219014
>SELinux:8192 avtab hash slots allocated.Num of rules:219014
>security:  8 users, 12 roles, 2385 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 219014 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda6, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1207721143.444:3): policy loaded auid=4294967295
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 20 (level, low) -> IRQ 21
>input: PC Speaker as /class/input/input4
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>sd 4:0:0:0: Attached scsi generic sg2 type 0
>sr 5:0:0:0: Attached scsi generic sg3 type 5
>sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>sr 5:0:0:0: Attached scsi CD-ROM sr1
>usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1204
>usbcore: registered new interface driver usblp
>usbcore: registered new interface driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
>usbcore: registered new interface driver usbserial_generic
>drivers/usb/serial/usb-serial.c: USB Serial Driver core
>input: Power Button (FF) as /class/input/input5
>Bluetooth: Core ver 2.11
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input6
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>ACPI: Power Button (CM) [VBTN]
>drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
>pl2303 3-2.7:1.0: pl2303 converter detected
>usb 3-2.7: pl2303 converter now attached to ttyUSB0
>usbcore: registered new interface driver pl2303
>drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level, low) -> IRQ 22
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>e1000: 0000:03:03.0: e1000_probe: (PCI:33MHz:32-bit) 00:07:e9:2e:f3:ff
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:732: codec_mask = 0x4
>ALSA sound/pci/hda/hda_codec.c:2162: hda_codec: model 'dell-3stack' is selected for config 1028:1dd (Dell Dimension E520)
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 0a pin config 02211230
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 0b pin config 02a11220
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 0c pin config 01a19040
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 0d pin config 01114210
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 0e pin config 01111212
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 0f pin config 01116211
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 10 pin config 01813050
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 11 pin config 01112214
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 12 pin config 403003fa
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 13 pin config 40000100
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 14 pin config 40000100
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 21 pin config 404003fb
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 22 pin config 40c003fc
>ALSA sound/pci/hda/patch_sigmatel.c:1241: hda_codec: pin nid 23 pin config 00000000
>ALSA sound/pci/hda/hda_codec.c:2757: autoconfig: line_outs=4 (0xd/0xe/0xf/0x11/0x0)
>ALSA sound/pci/hda/hda_codec.c:2761:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2765:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2773:    inputs: mic=0xc, fmic=0xb, line=0x10, fline=0x0, cd=0x0, aux=0x0
>ALSA sound/pci/hda/patch_sigmatel.c:1614: stac92xx_add_dyn_out_pins: total dac count=4
>ALSA sound/pci/hda/patch_sigmatel.c:1737: dac_nids=4 (0x2/0x4/0x5/0x3/0x0)
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda6, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-6, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-4, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-7, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-5, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>fuse init (API version 7.9)
>SELinux: initialized (dev sda2, type fuseblk), uses genfs_contexts
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Adding 2104472k swap on /dev/sda5.  Priority:-1 extents:1 across:2104472k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>SELinux: initialized (dev 0:16, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:17, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:18, type nfs), uses genfs_contexts
>audit(1207721163.770:4): audit_pid=2231 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 1.5.6 (interface 0x00050002).
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 440408: 300377 | 301755