Attachment 301915 Details for Bug 441657 – normal Kernel boot log

normal Kernel boot log

normal-boot (text/plain), 16.40 KB, created by Qian Cai on 2008-04-10 01:35:09 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Qian Cai

Created: 2008-04-10 01:35:09 UTC

Size: 16.40 KB

patch

obsolete

>root (hd0,0)
> Filesystem type is ext2fs, partition type 0x83
>kernel /vmlinuz-2.6.18-88.el5 ro root=/dev/VolGroup00/LogVol00 console=ttyS0,11
>5200n8 crashkernel=128M@16M nmi_watchdog=1
>   [Linux-bzImage, setup=0x1e00, size=0x1b6d54]
>initrd /initrd-2.6.18-88.el5.img
>   [Linux-initrd @ 0x37cf8000, 0x2f7241 bytes]
>
>Linux version 2.6.18-88.el5 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-41)) #1 SMP Tue Apr 1 19:01:20 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
> BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
> BIOS-e820: 000000003ff70000 - 000000003ff7b000 (ACPI data)
> BIOS-e820: 000000003ff7b000 - 000000003ff80000 (ACPI NVS)
> BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f6f70
>Using x86 segment limits to approximate NX protection
>DMI 2.3 present.
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>Detected 3192.409 MHz processor.
>Built 1 zonelists.  Total pages: 262000
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS0,115200n8 crashkernel=128M@16M nmi_watchdog=1
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c074b000 soft=c072b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 899972k/1048000k available (2095k kernel code, 147216k reserved, 875k data, 228k init, 130496k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 6386.70 BogoMIPS (lpj=3193354)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel(R) Xeon(TM) CPU 3.20GHz stepping 0a
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c074c000 soft=c072c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6383.17 BogoMIPS (lpj=3191585)
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Xeon(TM) CPU 3.20GHz stepping 0a
>Total of 2 processors activated (12769.87 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>migration_cost=25
>checking if image is initramfs... it is
>Freeing initrd memory: 3036k freed
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>PCI: Buses that can't use MMCONFIG will use type 1 PCI conf access.
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>PCI: PXH quirk detected, disabling MSI for SHPC device
>PCI: PXH quirk detected, disabling MSI for SHPC device
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:01:00.0
>  IO window: 2000-2fff
>  MEM window: d0100000-d01fffff
>  PREFETCH window: 50000000-500fffff
>PCI: Bridge: 0000:01:00.2
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: 2000-2fff
>  MEM window: d0100000-d01fffff
>  PREFETCH window: 50000000-500fffff
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:07.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-3fff
>  MEM window: d0200000-d02fffff
>  PREFETCH window: d8000000-dfffffff
>ACPI: PCI Interrupt 0000:00:02.0[B] -> GSI 17 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:00:04.0[C] -> GSI 18 (level, low) -> IRQ 177
>ACPI: PCI Interrupt 0000:00:05.0[C] -> GSI 18 (level, low) -> IRQ 177
>ACPI: PCI Interrupt 0000:00:06.0[D] -> GSI 19 (level, low) -> IRQ 185
>ACPI: PCI Interrupt 0000:00:07.0[D] -> GSI 19 (level, low) -> IRQ 185
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x3a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1207697498.968:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 5332E63E305BA832
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x2
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x3
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>hda: SR244W, ATAPI CD/DVD-ROM drive
>ide1: I/O resource 0x170-0x177 not free.
>ide1: ports already in use, skipping probe
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Testing NMI watchdog ... OK.
>Using IPI No-Shortcut mode
>Time: tsc clocksource has been installed.
>ACPI: (supports S0 S1 S5)
>Freeing unused kernel memory: 228k freed
>Write protecting the kernel read-only data: 393k
>Red Hat nash version 5.1.19.6 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block device nodes.
>Loading ehci-hcd.ko module
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: irq 193, io mem 0xd0001000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>Loading ohci-hcd.ko module
>Loading uhci-hcd.ko module
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 201
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 201, io base 0x00001400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 185, io base 0x00001420
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 177, io base 0x00001440
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 201
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 201, io base 0x00001460
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>Loading jbd.ko module
>Loading ext3.ko module
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading libata.ko module
>Loading ata_piix.ko module
>ata_piix 0000:00:1f.2: MAP [ IDE IDE P0 P1 ]
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 177
>ata_piix 0000:00:1f.2: 0x1F0 IDE port busy
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: DUMMY
>ata2: SATA max UDMA/133 bmdma 0x14b8 irq 15
>ata2.00: HPA detected: current 156250080, native 156301488
>ata2.00: ATA-7: WDC WD800JD-19MSA1, 10.01E01, max UDMA/133
>ata2.00: 156250080 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/133
>  Vendor: ATA       Model: WDC WD800JD-19MS  Rev: 10.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 156250080 512-byte hdwr sectors (80000 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write back
>SCSI device sda: 156250080 512-byte hdwr sectors (80000 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write back
> sda: sda1 sda2
>sd 1:0:0:0: Attached scsi disk sda
>Loading dm-mod.ko module
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
>Loading dm-mirror.ko module
>Loading dm-zero.ko module
>Loading dm-snapshot.ko module
>Waiting for driver initialization.
>Scanning and configuring dmraid supported devices
>Scanning logical volumes
>  Reading all physical volumes.  This may take a while...
>  Found volume group "VolGroup00" using metadata type lvm2
>Activating logical volumes
>  2 logical volume(s) in volume group "VolGroup00" now active
>Trying to resume from /dev/VolGroup00/LogVol01
>No suspend signature on swap, not resuming.
>Creating root device.
>Mounting root filesystem.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Setting up other filesystems.
>Setting up new root fs
>no fstab.sys, mounting internal defaults
>Switching to new root and running init.
>unmounting old /dev
>unmounting old /proc
>unmounting old /sys
>audit(1207697505.680:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>audit(1207697506.027:3): policy loaded auid=4294967295 ses=4294967295
>
>INIT: version 2.86 booting
>
>		Welcome to Red Hat Enterprise Linux Server
>		Press 'I' to enter interactive startup.
>Setting clock  (utc): Tue Apr  8 19:31:49 EDT 2008 [  OK  ]
>
>Starting udev: [  OK  ]
>
>Loading default keymap (us): [  OK  ]
>
>Setting hostname nec-em18.rhts.boston.redhat.com:  [  OK  ]
>
>Setting up Logical Volume Management:   2 logical volume(s) in volume group "VolGroup00" now active
>[  OK  ]
>
>Checking filesystems
>Checking all file systems.
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol00 
>/dev/VolGroup00/LogVol00: clean, 71441/19005440 files, 1138656/18989056 blocks
>[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 
>/boot: clean, 33/26104 files, 15062/104388 blocks
>[  OK  ]
>
>Remounting root filesystem in read-write mode:  [  OK  ]
>
>Mounting local filesystems:  [  OK  ]
>
>Enabling local filesystem quotas:  [  OK  ]
>
>Enabling /etc/fstab swaps:  [  OK  ]
>
>INIT: Entering runlevel: 3
>
>Entering non-interactive startup
>Applying Intel CPU microcode update: [  OK  ]
>
>Starting monitoring for VG VolGroup00:   2 logical volume(s) in volume group "VolGroup00" monitored
>[  OK  ]
>
>Starting background readahead: [  OK  ]
>
>Checking for hardware changes [  OK  ]
>
>Bringing up loopback interface:  [  OK  ]
>
>Bringing up interface eth0:  
>Determining IP information for eth0... done.
>[  OK  ]
>
>Starting auditd: [  OK  ]
>
>Starting restorecond: [  OK  ]
>
>Starting system logger: [  OK  ]
>
>Starting kernel logger: [  OK  ]
>
>Starting irqbalance: [  OK  ]
>
>Starting mcstransd: [  OK  ]
>
>Starting portmap: [  OK  ]
>
>Starting NFS statd: [  OK  ]
>
>Starting RPC idmapd: [  OK  ]
>
>Starting system message bus: [  OK  ]
>
>Starting Bluetooth services:[  OK  ]
>[  OK  ]
>
>Mounting other filesystems:  [  OK  ]
>
>Starting PC/SC smart card daemon (pcscd): [  OK  ]
>
>Starting hidd: [  OK  ]
>
>Starting autofs:  Loading autofs4: [  OK  ]
>
>Starting automount: [  OK  ]
>
>[  OK  ]
>
>Starting acpi daemon: [  OK  ]
>
>Starting sshd: [  OK  ]
>
>Starting cups: [  OK  ]
>
>Starting ntpd: [  OK  ]
>
>Starting sendmail: [  OK  ]
>
>Starting sm-client: [  OK  ]
>
>Starting console mouse services: [  OK  ]
>
>Starting crond: [  OK  ]
>
>Starting xfs: [  OK  ]
>
>Starting anacron: [  OK  ]
>
>Starting atd: [  OK  ]
>
>Starting yum-updatesd: [  OK  ]
>
>Starting Avahi daemon... [  OK  ]
>
>Starting HAL daemon: [  OK  ]
>
>Starting RHTS testing: 04/08/08 19:32:13  recipeID:68820 start:

Actions: View

Attachments on bug 441657: 301915 | 301964 | 302248