Attachment 302169 Details for Bug 442122 – kernel messages

kernel messages

dmesg (text/plain), 35.22 KB, created by Bill Nottingham on 2008-04-11 20:39:25 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bill Nottingham

Created: 2008-04-11 20:39:25 UTC

Size: 35.22 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-0.218.rc8.git7.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080404 (Red Hat 4.3.0-6) (GCC) ) #1 SMP Wed Apr 9 19:55:19 EDT 2008
>Command line: ro root=LABEL=/ quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000dff60000 (usable)
> BIOS-e820: 00000000dff60000 - 00000000dff78000 (ACPI data)
> BIOS-e820: 00000000dff78000 - 00000000dff80000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 917344) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used
>end_pfn_map = 1179648
>DMI not present or invalid.
>ACPI: RSDP 000FF8E0, 0014 (r0 INTEL )
>ACPI: RSDT DFF70000, 0030 (r1  INTEL NBVV_SDR 20040331 AMI        97)
>ACPI: FACP DFF71000, 0074 (r1  INTEL FRIDA002 20040331 AMI        97)
>ACPI: DSDT DFF60000, 34E6 (r1  FH27E FH27E020       20 MSFT  100000C)
>ACPI: FACS DFF78000, 0040
>ACPI: APIC DFF72000, 0084 (r1  INTEL FRIDA003 20040331 AMI        97)
>ACPI: HPET DFF75000, 0038 (r1  INTEL XXXXXXXX 20040331 AMI        97)
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000120000000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 917344) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000120000000
>  NODE_DATA [000000000000e000 - 0000000000015fff]
>  bootmap [0000000000016000 -  0000000000039fff] pages 24
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-75873b] TEXT DATA BSS
>early res: 3 [37d18000-37fef419] RAMDISK
>early res: 4 [9fc00-a0bff] EBDA
>early res: 5 [8000-dfff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
> [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
> [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
> [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
> [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
> [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
> [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
> [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
> [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
> [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
> [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0
> [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 on node 0
> [ffffe20003800000-ffffe200039fffff] PMD ->ffff810007600000 on node 0
> [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007a00000 on node 0
> [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007e00000 on node 0
> [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008200000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1179648
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   917344
>    0:  1048576 ->  1179648
>On node 0 totalpages: 1048319
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1380 pages reserved
>  DMA zone: 2563 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 898968 pages, LIFO batch:31
>  Normal zone: 1792 pages used for memmap
>  Normal zone: 129280 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
>Processor #6
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
>Processor #7
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x05] address[0xfec80000] gsi_base[24])
>IOAPIC[1]: apic_id 5, address 0xfec80000, GSI 24-47
>ACPI: IOAPIC (id[0x06] address[0xfec80400] gsi_base[48])
>IOAPIC[2]: apic_id 6, address 0xfec80400, GSI 48-71
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>PM: Registered nosave memory: 00000000dff60000 - 00000000dff78000
>PM: Registered nosave memory: 00000000dff78000 - 00000000dff80000
>PM: Registered nosave memory: 00000000dff80000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
>PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
>PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
>PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
>Allocating PCI resources starting at e0000000 (gap: dff80000:1ec80000)
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 43120 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1030811
>Policy zone: Normal
>Kernel command line: ro root=LABEL=/ quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 2400.079 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x841e000 - 0xc41e000
>Memory: 4058936k/4718592k available (2646k kernel code, 134340k reserved, 1390k data, 352k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4803.76 BogoMIPS (lpj=2401880)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 8333618
>Detected 8.333 MHz APIC timer.
>Booting processor 1/4 APIC 0x6
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4799.96 BogoMIPS (lpj=2399982)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU 1/6 -> Node 0
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 0
>                   Genuine Intel(R) CPU 2.40GHz stepping 01
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Booting processor 2/4 APIC 0x1
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 4799.93 BogoMIPS (lpj=2399966)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU 2/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>                   Genuine Intel(R) CPU 2.40GHz stepping 01
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>Booting processor 3/4 APIC 0x7
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4799.99 BogoMIPS (lpj=2399999)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU 3/7 -> Node 0
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 0
>                   Genuine Intel(R) CPU 2.40GHz stepping 01
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Brought up 4 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=6256 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000005
>  groups: 00000000,00000001 00000000,00000004
>  domain 1: span 00000000,0000000f
>   groups: 00000000,00000005 00000000,0000000a
>   domain 2: span 00000000,0000000f
>    groups: 00000000,0000000f
>CPU1 attaching sched-domain:
> domain 0: span 00000000,0000000a
>  groups: 00000000,00000002 00000000,00000008
>  domain 1: span 00000000,0000000f
>   groups: 00000000,0000000a 00000000,00000005
>   domain 2: span 00000000,0000000f
>    groups: 00000000,0000000f
>CPU2 attaching sched-domain:
> domain 0: span 00000000,00000005
>  groups: 00000000,00000004 00000000,00000001
>  domain 1: span 00000000,0000000f
>   groups: 00000000,00000005 00000000,0000000a
>   domain 2: span 00000000,0000000f
>    groups: 00000000,0000000f
>CPU3 attaching sched-domain:
> domain 0: span 00000000,0000000a
>  groups: 00000000,00000008 00000000,00000002
>  domain 1: span 00000000,0000000f
>   groups: 00000000,0000000a 00000000,00000005
>   domain 2: span 00000000,0000000f
>    groups: 00000000,0000000f
>net_namespace: 1016 bytes
>Time: 17:22:40  Date: 04/11/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
>* this clock source is slow. If you are sure your timer does not have
>* this bug, please use "acpi_pm_good" to disable the workaround
>pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P64_.BUSA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P64_.BUSB._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 17 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 0 of device 0000:00:01.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0c: ioport range 0x680-0x6ff has been reserved
>system 00:0d: ioport range 0x500-0x53f has been reserved
>system 00:0d: ioport range 0x400-0x47f has been reserved
>system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:10: iomem range 0x0-0x9ffff could not be reserved
>system 00:10: iomem range 0xc0000-0xcffff has been reserved
>system 00:10: iomem range 0xe0000-0xfffff could not be reserved
>system 00:10: iomem range 0x100000-0xdfffffff could not be reserved
>system 00:10: iomem range 0xfff00000-0xffffffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: 0xfc600000-0xfe6fffff
>  PREFETCH window: 0x00000000e4000000-0x00000000f40fffff
>PCI: Bridge: 0000:02:1d.0
>  IO window: a000-afff
>  MEM window: 0xfe700000-0xfe7fffff
>  PREFETCH window: 0x00000000f4100000-0x00000000f41fffff
>PCI: Bridge: 0000:02:1f.0
>  IO window: b000-bfff
>  MEM window: 0xfe800000-0xfe8fffff
>  PREFETCH window: 0x00000000f4200000-0x00000000f42fffff
>PCI: Bridge: 0000:00:02.0
>  IO window: a000-cfff
>  MEM window: 0xfe700000-0xfe9fffff
>  PREFETCH window: 0x00000000f4100000-0x00000000f43fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-dfff
>  MEM window: 0xfea00000-0xfeafffff
>  PREFETCH window: 0x00000000f4400000-0x00000000f44fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs...<7>Switched to high resolution mode on CPU 3
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 2
>Switched to high resolution mode on CPU 0
> it is
>Freeing initrd memory: 2909k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1207934559.771:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: Processor [CPU2] (supports 8 throttling states)
>ACPI: ACPI0007:02 is registered as cooling_device2
>ACPI: Processor [CPU3] (supports 8 throttling states)
>ACPI: ACPI0007:03 is registered as cooling_device3
>ACPI: Processor [CPU4] (supports 8 throttling states)
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel E7505 Chipset.
>agpgart: AGP aperture is 64M @ 0xf8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 4:439:390
>Freeing unused kernel memory: 352k freed
>Write protecting the kernel read-only data: 1116k
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.218.rc8.git7.fc9.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e880
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-0.218.rc8.git7.fc9.x86_64 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ec00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-0.218.rc8.git7.fc9.x86_64 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec80
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-0.218.rc8.git7.fc9.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata1.00: ATA-7: Maxtor 6Y060L0, YAR41BW0, max UDMA/133
>ata1.00: 120103200 sectors, multi 16: LBA 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: TEAC DW-548D, K4H6, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y060L0   YAR4 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 120103200 512-byte hardware sectors (61493 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 120103200 512-byte hardware sectors (61493 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            TEAC     DW-548D          K4H6 PQ: 0 ANSI: 5
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: sda5: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 352245
>ext3_orphan_cleanup: deleting unreferenced inode 1024063
>ext3_orphan_cleanup: deleting unreferenced inode 1024024
>EXT3-fs: sda5: 3 orphan inodes deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1207934576.774:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux:8192 avtab hash slots allocated. Num of rules:171123
>SELinux:8192 avtab hash slots allocated. Num of rules:171123
>security:  8 users, 12 roles, 2293 types, 115 bools, 1 sens, 1024 cats
>security:  72 classes, 171123 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda5, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1207934577.856:3): policy loaded auid=4294967295 ses=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>parport_pc 00:0b: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>input: PC Speaker as /devices/platform/pcspkr/input/input3
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 0x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>iTCO_vendor_support: vendor-support=0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>ACPI: Power Button (FF) [PWRF]
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Intel 82802 RNG detected
>ppdev: user-space parallel port driver
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 56 (level, low) -> IRQ 56
>e1000: 0000:03:03.0: e1000_probe: (PCI-X:66MHz:64-bit) 00:d0:b7:c2:ce:80
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 49672 usecs
>intel8x0: measured clock 221 rejected
>intel8x0: clocking to 48000
>md: bind<sda11>
>md: bind<sda9>
>md: bind<sda8>
>md: bind<sda6>
>md: bind<sda10>
>md: raid0 personality registered for level 0
>md0: setting max_sectors to 512, segment boundary to 131071
>raid0: looking at sda10
>raid0:   comparing sda10(1019904) with sda10(1019904)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 1 zones
>raid0: looking at sda11
>raid0:   comparing sda11(1019904) with sda10(1019904)
>raid0:   EQUAL
>raid0: FINAL 1 zones
>raid0: done.
>raid0 : md_size is 2039808 blocks.
>raid0 : conf->hash_spacing is 2039808 blocks.
>raid0 : nb_zone is 1.
>raid0 : Allocating 8 bytes for hash.
>md: bind<sda7>
>xor: automatically using best checksumming function: generic_sse
>   generic_sse:  3684.000 MB/sec
>xor: using function: generic_sse (3684.000 MB/sec)
>async_tx: api initialized (async)
>raid6: int64x1    773 MB/s
>raid6: int64x2   1503 MB/s
>raid6: int64x4   1496 MB/s
>raid6: int64x8   1402 MB/s
>raid6: sse2x1    1710 MB/s
>raid6: sse2x2    2445 MB/s
>raid6: sse2x4    2496 MB/s
>raid6: using algorithm sse2x4 (2496 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>md3: WARNING: sda7 appears to be on the same physical disk as sda6.
>md3: WARNING: sda7 appears to be on the same physical disk as sda8.
>md3: WARNING: sda7 appears to be on the same physical disk as sda9.
>md3: WARNING: sda6 appears to be on the same physical disk as sda8.
>md3: WARNING: sda6 appears to be on the same physical disk as sda9.
>md3: WARNING: sda9 appears to be on the same physical disk as sda8.
>True protection against single-disk failure might be compromised.
>raid5: device sda7 operational as raid disk 1
>raid5: device sda6 operational as raid disk 0
>raid5: device sda8 operational as raid disk 2
>raid5: device sda9 operational as raid disk 3
>raid5: allocated 4274kB for md3
>raid5: raid level 5 set md3 active with 4 out of 4 devices, algorithm 2
>RAID5 conf printout:
> --- rd:4 wd:4
> disk 0, o:1, dev:sda6
> disk 1, o:1, dev:sda7
> disk 2, o:1, dev:sda8
> disk 3, o:1, dev:sda9
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda5, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev md3, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev md0, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>type=1400 audit(1207934606.272:4): avc:  denied  { write } for  pid=2004 comm="cp" name="resolv.conf.predhclient.eth0" dev=sda5 ino=320104 scontext=system_u:system_r:dhcpc_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>type=1400 audit(1207934606.272:5): avc:  denied  { unlink } for  pid=2004 comm="cp" name="resolv.conf.predhclient.eth0" dev=sda5 ino=320104 scontext=system_u:system_r:dhcpc_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>type=1400 audit(1207934606.467:6): avc:  denied  { rename } for  pid=2014 comm="mv" name="yp.conf" dev=sda5 ino=320157 scontext=system_u:system_r:dhcpc_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>type=1400 audit(1207934606.468:7): avc:  denied  { write } for  pid=1963 comm="dhclient-script" name="yp.conf" dev=sda5 ino=320157 scontext=system_u:system_r:dhcpc_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>type=1400 audit(1207934606.468:8): avc:  denied  { write } for  pid=1963 comm="dhclient-script" name="yp.conf" dev=sda5 ino=320157 scontext=system_u:system_r:dhcpc_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>type=1400 audit(1207934606.469:9): avc:  denied  { append } for  pid=1963 comm="dhclient-script" name="yp.conf" dev=sda5 ino=320157 scontext=system_u:system_r:dhcpc_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>type=1400 audit(1207934606.469:10): avc:  denied  { append } for  pid=1963 comm="dhclient-script" name="yp.conf" dev=sda5 ino=320157 scontext=system_u:system_r:dhcpc_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>type=1400 audit(1207934606.469:11): avc:  denied  { append } for  pid=1963 comm="dhclient-script" name="yp.conf" dev=sda5 ino=320157 scontext=system_u:system_r:dhcpc_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>type=1400 audit(1207934606.469:12): avc:  denied  { append } for  pid=1963 comm="dhclient-script" name="yp.conf" dev=sda5 ino=320157 scontext=system_u:system_r:dhcpc_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Detected an NV30 generation card (0x034b00a2)
>[drm] Initialized nouveau 0.0.10 20060213 on minor 0
>mtrr: type mismatch for e8000000,8000000 old: write-back new: write-combining
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Xorg tried to set rate=x12. Setting to AGP3 x8 mode.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>[drm] Allocating FIFO number 0
>[drm] nouveau_fifo_alloc: initialised FIFO 0
>[drm] Allocating FIFO number 1
>[drm] nouveau_fifo_alloc: initialised FIFO 1
>[drm] PFIFO_DMA_PUSHER - Ch 1
>[drm] nouveau_fifo_free: freeing fifo 1
>[drm:nouveau_fifo_free] *ERROR* Failed to idle channel 1 before destroy.Prepare for strangeness..
>[drm] nouveau_fifo_free: freeing fifo 0
>BUG: unable to handle kernel paging request at ffffc20001082500
>IP: [<ffffffff88351fb8>] :nouveau:nouveau_fifo_free+0x3b/0x21c
>PGD 11fc0c067 PUD 11fc0d067 PMD 11eac3067 PTE 0
>Oops: 0002 [1] SMP 
>CPU 0 
>Modules linked in: nouveau drm bridge bnep rfcomm l2cap bluetooth autofs4 fuse sunrpc ipv6 dm_mirror dm_multipath dm_mod raid456 async_xor async_memcpy async_tx xor raid0 snd_intel8x0 snd_ac97_codec ac97_bus e1000 snd_seq_dummy i2c_i801 snd_seq_oss snd_seq_midi_event ppdev snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm intel_rng i2c_core snd_timer iTCO_wdt snd button shpchp iTCO_vendor_support soundcore sr_mod pcspkr parport_pc snd_page_alloc cdrom floppy sg parport ata_piix ata_generic pata_acpi libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: freq_table]
>Pid: 2675, comm: Xorg Not tainted 2.6.25-0.218.rc8.git7.fc9.x86_64 #1
>RIP: 0010:[<ffffffff88351fb8>]  [<ffffffff88351fb8>] :nouveau:nouveau_fifo_free+0x3b/0x21c
>RSP: 0018:ffff81010848fcf8  EFLAGS: 00010292
>RAX: ffffc20001080000 RBX: ffff81010b0ee800 RCX: ffffffff8836a4ba
>RDX: 0000000000000001 RSI: 0000000000000092 RDI: ffff81011e347000
>RBP: ffff81010848fd18 R08: ffffffff813bfbd0 R09: ffff81010848fb58
>R10: 00000000e23ff333 R11: 0000000000000000 R12: ffff81010857be40
>R13: ffff81011e347000 R14: ffff81010857b100 R15: ffff81011e347010
>FS:  0000000000000000(0000) GS:ffffffff813f2000(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: ffffc20001082500 CR3: 0000000000201000 CR4: 00000000000006a0
>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>Process Xorg (pid: 2675, threadinfo ffff81010848e000, task ffff81010b174000)
>Stack:  ffff81010b0ee800 ffff81011e347000 ffff81010b0ee800 ffff81010857b100
> ffff81010848fd38 ffffffff88356fb9 ffff81010848fd68 ffff81011e34700c
> ffff81010848fd68 ffffffff883512df ffff81011e347000 ffff81011e34700c
>Call Trace:
> [<ffffffff88356fb9>] :nouveau:nouveau_dma_channel_takedown+0x3f/0x4e
> [<ffffffff883512df>] :nouveau:nouveau_lastclose+0x5c/0x117
> [<ffffffff88325c8f>] :drm:drm_lastclose+0x61/0x2ce
> [<ffffffff8832659e>] :drm:drm_release+0x478/0x495
> [<ffffffff810a452f>] __fput+0xca/0x189
> [<ffffffff810a4602>] fput+0x14/0x16
> [<ffffffff810a18f8>] filp_close+0x66/0x71
> [<ffffffff81034ab6>] put_files_struct+0x74/0xc8
> [<ffffffff81034b51>] __exit_files+0x47/0x50
> [<ffffffff81036318>] do_exit+0x299/0x656
> [<ffffffff81036750>] do_group_exit+0x7b/0x96
> [<ffffffff8103677d>] sys_exit_group+0x12/0x14
> [<ffffffff8100c182>] tracesys+0xd5/0xda
>
>
>Code: 55 41 54 49 89 fc 53 4c 8b 2f 8b 57 08 48 c7 c7 ba a4 36 88 49 8b 9d 50 03 00 00 e8 c4 3c f4 f8 4c 89 ef 48 8b 43 18 48 8b 40 18 <c7> 80 00 25 00 00 00 00 00 00 ff 93 f8 04 00 00 41 3b 44 24 08 
>RIP  [<ffffffff88351fb8>] :nouveau:nouveau_fifo_free+0x3b/0x21c
> RSP <ffff81010848fcf8>
>CR2: ffffc20001082500
>---[ end trace 01aeaf6890e95612 ]---
>Fixing recursive fault but reboot is needed!
>mtrr: type mismatch for e8000000,8000000 old: write-back new: write-combining

Actions: View

Attachments on bug 442122: 302168 | 302169 | 302611