Attachment 302276 Details for Bug 442265 – dmesg output of kernel init, includes oops at bottom

dmesg output of kernel init, includes oops at bottom

kernel-oops-rmmod-usbserial-2.6.24.4-64.fc8.txt (text/plain), 36.82 KB, created by Scott Mcdermott on 2008-04-13 16:43:45 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Scott Mcdermott

Created: 2008-04-13 16:43:45 UTC

Size: 36.82 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.4-64.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sat Mar 29 09:54:46 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
> BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000be6b0000 (usable)
> BIOS-e820: 00000000be6b0000 - 00000000be6cc000 (ACPI data)
> BIOS-e820: 00000000be6cc000 - 00000000be700000 (ACPI NVS)
> BIOS-e820: 00000000be700000 - 00000000bf000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>2150MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f6980
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 779952) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   779952
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   779952
>On node 0 totalpages: 779952
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 4301 pages used for memmap
>  HighMem zone: 546275 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F6950, 0024 (r2 LENOVO)
>ACPI: XSDT BE6BD444, 0094 (r1 LENOVO TP-7N        2060  LTP        0)
>ACPI: FACP BE6BD500, 00F4 (r3 LENOVO TP-7N        2060 LNVO        1)
>ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
>ACPI: DSDT BE6BD8DB, E24E (r1 LENOVO TP-7N        2060 MSFT  3000000)
>ACPI: FACS BE6E4000, 0040
>ACPI: SSDT BE6BD6B4, 0227 (r1 LENOVO TP-7N        2060 MSFT  3000000)
>ACPI: ECDT BE6CBB29, 0052 (r1 LENOVO TP-7N        2060 LNVO        1)
>ACPI: TCPA BE6CBB7B, 0032 (r2 LENOVO TP-7N        2060 LNVO        1)
>ACPI: APIC BE6CBBAD, 0068 (r1 LENOVO TP-7N        2060 LNVO        1)
>ACPI: MCFG BE6CBC15, 003C (r1 LENOVO TP-7N        2060 LNVO        1)
>ACPI: HPET BE6CBC51, 0038 (r1 LENOVO TP-7N        2060 LNVO        1)
>ACPI: SLIC BE6CBDF0, 0176 (r1 LENOVO TP-7N        2060  LTP        0)
>ACPI: BOOT BE6CBF66, 0028 (r1 LENOVO TP-7N        2060  LTP        1)
>ACPI: ASF! BE6CBF8E, 0072 (r16 LENOVO TP-7N        2060 PTL         1)
>ACPI: SSDT BE6E2697, 025F (r1 LENOVO TP-7N        2060 INTL 20050513)
>ACPI: SSDT BE6E28F6, 00A6 (r1 LENOVO TP-7N        2060 INTL 20050513)
>ACPI: SSDT BE6E299C, 04F7 (r1 LENOVO TP-7N        2060 INTL 20050513)
>ACPI: SSDT BE6E2E93, 01D8 (r1 LENOVO TP-7N        2060 INTL 20050513)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at c0000000 (gap: bf000000:31000000)
>swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
>swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
>swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000
>swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 773859
>Kernel command line: ro root=LABEL=/ vga=792 video=vesafb:mtrr:3
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07bb000 soft=c079b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1795.559 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 3085732k/3119808k available (2237k kernel code, 32784k reserved, 1131k data, 288k init, 2202304k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0750000 - 0xc0798000   ( 288 kB)
>      .data : 0xc062f789 - 0xc074a724   (1131 kB)
>      .text : 0xc0400000 - 0xc062f789   (2237 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 3595.42 BogoMIPS (lpj=1797711)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 Duo CPU     L7700  @ 1.80GHz stepping 0b
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07bc000 soft=c079c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3590.97 BogoMIPS (lpj=1795485)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     L7700  @ 1.80GHz stepping 0b
>Total of 2 processors activated (7186.39 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 293490 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to: check_tsc_sync_source failed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>net_namespace: 64 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  6:03:23  Date: 04/13/08
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver 
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xfddc7, last bus=8
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: DMI System Vendor: LENOVO
>ACPI: DMI Product Name: 7668CTO
>ACPI: DMI Product Version: ThinkPad X61s
>ACPI: DMI Board Name: 7668CTO
>ACPI: DMI BIOS Vendor: LENOVO
>ACPI: DMI BIOS Date: 12/28/2007
>ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
>ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 9 10 11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Power Resource [PUBS] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnpacpi: exceeded the max number of mem resources. Max:12 Found:12
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: hpet clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>system 00:00: iomem range 0xc8000-0xcbfff has been reserved
>system 00:00: iomem range 0xcc000-0xcffff has been reserved
>system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
>system 00:00: iomem range 0x0-0x0 could not be reserved
>system 00:00: iomem range 0x0-0x0 could not be reserved
>system 00:00: iomem range 0x0-0x0 could not be reserved
>system 00:00: iomem range 0xe0000-0xe3fff has been reserved
>system 00:00: iomem range 0xe4000-0xe7fff has been reserved
>system 00:00: iomem range 0xe8000-0xebfff has been reserved
>system 00:02: ioport range 0x164e-0x164f has been reserved
>system 00:02: ioport range 0x1000-0x107f has been reserved
>system 00:02: ioport range 0x1180-0x11bf has been reserved
>system 00:02: ioport range 0x800-0x80f has been reserved
>system 00:02: ioport range 0x15e0-0x15ef has been reserved
>system 00:02: ioport range 0x1600-0x165f could not be reserved
>system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
>system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
>system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
>system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
>system 00:02: iomem range 0xfed45000-0xfed4bfff could not be reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: f4000000-f5ffffff
>  PREFETCH window: f8500000-f85fffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: 3000-3fff
>  MEM window: f6000000-f7ffffff
>  PREFETCH window: f8600000-f86fffff
>PCI: Bus 6, cardbus bridge: 0000:05:00.0
>  IO window: 00004000-000040ff
>  IO window: 00004400-000044ff
>  PREFETCH window: d8000000-dbffffff
>  MEM window: c0000000-c3ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 4000-7fff
>  MEM window: d4000000-d7efffff
>  PREFETCH window: d8000000-dbffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3013k freed
>Simple Boot Flag at 0x35 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1208066602.552:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key A149FFC6EE301D40
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 6144k, total 7616k
>vesafb: mode is 1024x768x32, linelength=4096, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI: SSDT BE6E1B32, 0282 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
>ACPI: SSDT BE6E1E39, 085E (r1  PmRef  Cpu0Cst      100 INTL 20050513)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT BE6E1A6A, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
>ACPI: SSDT BE6E1DB4, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (61 C)
>ACPI: Thermal Zone [THM1] (60 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 965GM Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 19
>0000:00:03.3: ttyS0 at I/O 0x1830 (irq = 19) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:05:00.0 [17aa:20c6]
>Yenta: ISA IRQ mask 0x0cb8, PCI irq 18
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x7fff
>cs: IO port probe 0x4000-0x7fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xd4000000 - 0xd7efffff
>pcmcia: parent PCI bridge Memory window: 0xd8000000 - 0xdbffffff
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor ladder
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /class/input/input2
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 4:111:64
>Freeing unused kernel memory: 288k freed
>Write protecting the kernel read-only data: 894k
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf8426c00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf8427000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 18, io base 0x000018a0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018c0
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 18
>ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match, using nr_ports
>ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7
>usb 3-2: configuration #1 chosen from 1 choice
>usb 6-1: new full speed USB device using uhci_hcd and address 2
>usb 6-1: configuration #1 chosen from 1 choice
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x7 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xf8426000 port 0xf8426100 irq 221
>ata2: SATA max UDMA/133 abar m2048@0xf8426000 port 0xf8426180 irq 221
>ata3: SATA max UDMA/133 abar m2048@0xf8426000 port 0xf8426200 irq 221
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-8: HITACHI HTS722010K9SA00, DC2ZC75A, max UDMA/133
>ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link down (SStatus 0 SControl 0)
>ata3: SATA link down (SStatus 0 SControl 0)
>scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS72201 DC2Z PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:8192 avtab hash slots allocated.Num of rules:219012
>SELinux:8192 avtab hash slots allocated.Num of rules:219012
>security:  8 users, 12 roles, 2385 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 219012 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1208066618.367:2): policy loaded auid=4294967295
>Clocksource tsc unstable (delta = -83798368 ns)
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:d3:c6:d3:77
>iTCO_vendor_support: vendor-support=0
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>usbcore: registered new interface driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
>usbserial_generic 6-1:1.0: generic converter detected
>usb 6-1: generic converter now attached to ttyUSB0
>usb 6-1: generic converter now attached to ttyUSB1
>usb 6-1: generic converter now attached to ttyUSB2
>usbcore: registered new interface driver usbserial_generic
>drivers/usb/serial/usb-serial.c: USB Serial Driver core
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input4
>input: PC Speaker as /class/input/input5
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input6
>PCI: Enabling device 0000:00:03.2 (0004 -> 0005)
>ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 18 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:03.2 to 64
>ACPI: PCI interrupt for device 0000:00:03.2 disabled
>thinkpad_acpi: ThinkPad ACPI Extras v0.17
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 7NETA6WW (2.06 ), EC 7MHT25WW-1.03
>thinkpad_acpi: Lenovo ThinkPad X61s
>thinkpad_acpi: radio switch found; radios are enabled
>drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB modem (1 port)
>drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB modem (3 port)
>usbcore: registered new interface driver sierra
>drivers/usb/serial/sierra.c: USB Driver for Sierra Wireless USB modems: v.1.2.5b
>ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
>ACPI: Sleep Button (CM) [SLPB]
>thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
>input: ThinkPad Extra Buttons as /class/input/input7
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: AC Adapter [AC] (on-line)
>input: Video Bus as /class/input/input8
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /class/input/input9
>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:05:00.2 [1180:0822] (rev 21)
>ACPI: PCI Interrupt 0000:05:00.2[C] -> GSI 18 (level, low) -> IRQ 22
>sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
>PCI: Setting latency timer of device 0000:05:00.2 to 64
>mmc0: SDHCI at 0xd7efe400 irq 22 DMA
>ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 17 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:05:00.1 to 64
>iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.26kds
>iwl4965: Copyright(c) 2003-2008 Intel Corporation
>firewire_ohci: Added fw-ohci device 0000:05:00.1, OHCI version 1.10
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>iwl4965: Detected Intel Wireless WiFi Link 4965AGN
>iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
>phy0: Selected rate control algorithm 'iwl-4965-rs'
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 19
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 19
>hda_intel: probe_mask set to 0x1 for device 17aa:20ac
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:732: codec_mask = 0x3
>ALSA sound/pci/hda/hda_codec.c:2162: hda_codec: model 'thinkpad' is selected for config 17aa:0 (Lenovo Thinkpad)
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>firewire_core: created device fw0: GUID 0016d3ffffc6d377, S400
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1a:c4:0e:04:99
>wlan0: RX authentication from 00:1a:c4:0e:04:99 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1a:c4:0e:04:99
>wlan0: RX AssocResp from 00:1a:c4:0e:04:99 (capab=0x21 status=0 aid=3)
>wlan0: associated
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
>SGI XFS Quota Management subsystem
>Filesystem "dm-4": Disabling barriers, not supported by the underlying device
>XFS mounting filesystem dm-4
>Ending clean XFS mount for filesystem: dm-4
>SELinux: initialized (dev dm-4, type xfs), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-5, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>SELinux: initialized (dev dm-5, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 8008392k swap on /dev/sda3.  Priority:-1 extents:1 across:8008392k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>audit(1208066637.817:3): audit_pid=2131 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1a:c4:0e:04:99
>wlan0: RX authentication from 00:1a:c4:0e:04:99 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1a:c4:0e:04:99
>wlan0: RX AssocResp from 00:1a:c4:0e:04:99 (capab=0x21 status=0 aid=3)
>wlan0: associated
>wlan0: CTS protection enabled (BSSID=00:1a:c4:0e:04:99)
>wlan0: CTS protection disabled (BSSID=00:1a:c4:0e:04:99)
>usb 6-1: USB disconnect, address 2
>generic ttyUSB0: generic converter now disconnected from ttyUSB0
>generic ttyUSB1: generic converter now disconnected from ttyUSB1
>generic ttyUSB2: generic converter now disconnected from ttyUSB2
>usbserial_generic 6-1:1.0: device disconnected
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Monitor-Mwait will be used to enter C-3 state
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>wlan0: No ProbeResp from current AP 00:1a:c4:0e:04:99 - assume out of range
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 19
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>wlan0: RX deauthentication from 00:1a:c4:0e:04:99 (reason=2)
>wlan0: deauthenticated
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>usbcore: deregistering interface driver sierra
>drivers/usb/serial/usb-serial.c: USB Serial deregistering driver Sierra USB modem (1 port)
>drivers/usb/serial/usb-serial.c: USB Serial deregistering driver Sierra USB modem (3 port)
>usbcore: deregistering interface driver usbserial_generic
>drivers/usb/serial/usb-serial.c: USB Serial deregistering driver generic
>usbcore: deregistering interface driver usbserial
>usbcore: registered new interface driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
>usbcore: registered new interface driver usbserial_generic
>drivers/usb/serial/usb-serial.c: USB Serial Driver core
>drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB modem (1 port)
>drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB modem (3 port)
>usbcore: registered new interface driver sierra
>drivers/usb/serial/sierra.c: USB Driver for Sierra Wireless USB modems: v.1.2.5b
>usb 6-1: new full speed USB device using uhci_hcd and address 3
>usb 6-1: configuration #1 chosen from 1 choice
>usbserial_generic 6-1:1.0: Sierra USB modem (3 port) converter detected
>usb 6-1: Sierra USB modem (3 port) converter now attached to ttyUSB0
>usb 6-1: Sierra USB modem (3 port) converter now attached to ttyUSB1
>usb 6-1: Sierra USB modem (3 port) converter now attached to ttyUSB2
>usbcore: deregistering interface driver sierra
>drivers/usb/serial/usb-serial.c: USB Serial deregistering driver Sierra USB modem (1 port)
>drivers/usb/serial/usb-serial.c: USB Serial deregistering driver Sierra USB modem (3 port)
>sierra3 ttyUSB2: Sierra USB modem (3 port) converter now disconnected from ttyUSB2
>sierra3 ttyUSB1: Sierra USB modem (3 port) converter now disconnected from ttyUSB1
>sierra3 ttyUSB0: Sierra USB modem (3 port) converter now disconnected from ttyUSB0
>usbcore: deregistering interface driver usbserial_generic
>BUG: unable to handle kernel paging request at virtual address f8fc3410
>printing eip: f8ff5ae3 *pde = 37b69067 *pte = 00000000 
>Oops: 0000 [#1] SMP 
>Modules linked in: usbserial bluetooth fuse ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables cpufreq_ondemand acpi_cpufreq xfs dm_mirror dm_multipath dm_mod arc4 snd_seq_dummy ecb blkcipher snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss iwl4965 snd_pcm iwlcore firewire_ohci sdhci snd_timer video firewire_core ac mmc_core battery snd_page_alloc i2c_i801 output mac80211 thinkpad_acpi pata_acpi pcspkr button i2c_core iTCO_wdt snd iTCO_vendor_support crc_itu_t ata_generic e1000 cfg80211 hwmon soundcore sg usb_storage ahci libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
>
>Pid: 27676, comm: modprobe Not tainted (2.6.24.4-64.fc8 #1)
>EIP: 0060:[<f8ff5ae3>] EFLAGS: 00210246 CPU: 0
>EIP is at destroy_serial+0x3c/0x102 [usbserial]
>EAX: f5691c80 EBX: f5691c80 ECX: f8871554 EDX: f8fc3360
>ESI: f8ff5aa7 EDI: 00000003 EBP: f5cb941c ESP: dd3c8e90
> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
>Process modprobe (pid: 27676, ti=dd3c8000 task=f56693b0 task.ti=dd3c8000)
>Stack: c04334a0 00200246 c0498db1 00200246 f5691cb4 f8ff5aa7 00000003 c04fc07e 
>       f5691c80 c05860e2 f8ffae98 f5691c80 c062b3b3 f5691cb4 f5691c80 f8ff59db 
>       f5eb7c00 f8ff5e8a 00000118 00000007 c058688d f5cb9400 f5cb941c f8ffafe0 
>Call Trace:
> [<c04334a0>] irq_exit+0x53/0x6b
> [<c0498db1>] find_inode+0x1b/0x56
> [<f8ff5aa7>] destroy_serial+0x0/0x102 [usbserial]
> [<c04fc07e>] kref_put+0x72/0x7f
> [<c05860e2>] usb_kill_urb+0x1b/0xcf
> [<c062b3b3>] mutex_lock+0x1a/0x29
> [<f8ff59db>] usb_serial_put+0x1c/0x27 [usbserial]
> [<f8ff5e8a>] usb_serial_disconnect+0x74/0x9d [usbserial]
> [<c058688d>] usb_disable_interface+0x22/0x2f
> [<c0588db2>] usb_unbind_interface+0x44/0x94
> [<c05715d8>] __device_release_driver+0x6b/0x88
> [<c0571a54>] driver_detach+0x96/0xd2
> [<c0571196>] bus_remove_driver+0x63/0x81
> [<c0588803>] usb_deregister+0x74/0x7f
> [<f8ff738f>] usb_serial_generic_deregister+0xa/0x14 [usbserial]
> [<f8ff7b29>] usb_serial_exit+0x5/0x33 [usbserial]
> [<c044d6c9>] sys_delete_module+0x177/0x19e
> [<c045db7d>] audit_syscall_entry+0x10d/0x137
> [<c04051da>] syscall_call+0x7/0xb
> =======================
>Code: 25 8b 43 04 8b 00 c7 44 24 08 26 7d ff f8 c7 44 24 04 1c 7f ff f8 c7 04 24 37 84 ff f8 89 44 24 0c e8 7c 9c 43 c7 8b 53 04 89 d8 <ff> 92 b0 00 00 00 83 3d 04 c4 ff f8 00 74 1c c7 44 24 08 35 7d 
>EIP: [<f8ff5ae3>] destroy_serial+0x3c/0x102 [usbserial] SS:ESP 0068:dd3c8e90
>---[ end trace 1192c1a5a507e4df ]---

Actions: View

Attachments on bug 442265: 302276