Attachment 302284 Details for Bug 442287 – dmesg output

dmesg output

dmesg.log (text/plain), 38.12 KB, created by James on 2008-04-13 22:09:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: James

Created: 2008-04-13 22:09:03 UTC

Size: 38.12 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.4-64.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sat Mar 29 09:54:46 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
> BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI NVS)
> BIOS-e820: 000000007f6df000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>1142MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f7c80
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 521936) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   521936
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   521936
>On node 0 totalpages: 521936
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2285 pages used for memmap
>  HighMem zone: 290275 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F7C00, 0024 (r2 PTLTD )
>ACPI: XSDT 7F6D4084, 008C (r1 PTLTD  	 XSDT    6040000  LTP        0)
>ACPI: FACP 7F6DBD48, 00F4 (r3 INTEL  CRESTLNE  6040000 ALAN        1)
>ACPI: DSDT 7F6D5E5D, 5E77 (r2 INTEL  CRESTLNE  6040000 INTL 20050624)
>ACPI: FACS 7F6DEFC0, 0040
>ACPI: APIC 7F6DBE3C, 0068 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
>ACPI: HPET 7F6DBEA4, 0038 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
>ACPI: MCFG 7F6DBEDC, 003C (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
>ACPI: TCPA 7F6DBF18, 0032 (r1 Intel   CRESTLN  6040000          5A52)
>ACPI: TMOR 7F6DBF4A, 0026 (r1 PTLTD            6040000 PTL         3)
>ACPI: APIC 7F6DBF70, 0068 (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: BOOT 7F6DBFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>ACPI: SSDT 7F6D580E, 064F (r1 SataRe  SataPri     1000 INTL 20050624)
>ACPI: SSDT 7F6D517C, 0692 (r1 SataRe  SataSec     1000 INTL 20050624)
>ACPI: SSDT 7F6D469C, 0258 (r1  PmRef  Cpu0Tst     3000 INTL 20050624)
>ACPI: SSDT 7F6D45F6, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050624)
>ACPI: SSDT 7F6D4110, 04E6 (r1  PmRef    CpuPm     3000 INTL 20050624)
>ACPI: BIOS bug: multiple APIC/MADT found, using 0
>ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 7:7 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 7:7 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517859
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07bb000 soft=c079b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2094.763 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2061112k/2087744k available (2237k kernel code, 25388k reserved, 1131k data, 288k init, 1170240k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0750000 - 0xc0798000   ( 288 kB)
>      .data : 0xc062f789 - 0xc074a724   (1131 kB)
>      .text : 0xc0400000 - 0xc062f789   (2237 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4192.89 BogoMIPS (lpj=2096449)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3bd 00000000 00000001 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0008e3bd 00000000 00000001 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 Duo CPU     T8100  @ 2.10GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07bc000 soft=c079c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4127.03 BogoMIPS (lpj=2063519)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3bd 00000000 00000001 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0008e3bd 00000000 00000001 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T8100  @ 2.10GHz stepping 06
>Total of 2 processors activated (8319.93 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>net_namespace: 64 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 21:31:44  Date: 04/13/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xfdda1, last bus=12
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: DMI System Vendor: CLEVO Co.
>ACPI: DMI Product Name: M720R
>ACPI: DMI Product Version: Not Applicable
>ACPI: DMI Board Name: M720R
>ACPI: DMI BIOS Vendor: Phoenix Technologies LTD
>ACPI: DMI BIOS Date: 01/10/2008
>ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
>ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
>system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
>system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
>system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
>system 00:06: ioport range 0x200-0x20f has been reserved
>system 00:06: ioport range 0x680-0x69f has been reserved
>system 00:06: ioport range 0x800-0x80f has been reserved
>system 00:06: ioport range 0x1000-0x107f has been reserved
>system 00:06: ioport range 0x1180-0x11bf has been reserved
>system 00:06: ioport range 0x1640-0x164f has been reserved
>system 00:06: ioport range 0xfe00-0xfe00 has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: f0e00000-f0efffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: 2000-2fff
>  MEM window: f0600000-f07fffff
>  PREFETCH window: f0000000-f01fffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: 3000-3fff
>  MEM window: f0800000-f09fffff
>  PREFETCH window: f0200000-f03fffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: 4000-4fff
>  MEM window: f0a00000-f0bfffff
>  PREFETCH window: f0400000-f05fffff
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: 5000-5fff
>  MEM window: f0f00000-f0ffffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3640k freed
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1208122304.495:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key A149FFC6EE301D40
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Switched to high resolution mode on CPU 1
>Allocate Port Service[0000:00:1c.5:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7F6D4E23, 02A8 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>ACPI: SSDT 7F6D48F4, 04AA (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>Switched to high resolution mode on CPU 0
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: SSDT 7F6D50CB, 00B1 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
>ACPI: SSDT 7F6D4D9E, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Invalid passive threshold
>ACPI: Thermal Zone [THRM] (49 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 965GM Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor ladder
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x81a0b1, caps: 0xa04713/0x204000
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>cpuidle: using governor menu
>Marking TSC unstable due to: TSC halts in idle.
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 4:669:550
>  hash matches device PNP0C0F:01
>Freeing unused kernel memory: 288k freed
>Write protecting the kernel read-only data: 894k
>Time: hpet clocksource has been installed.
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf1204000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf1204400
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 17, io base 0x00001820
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-2: new high speed USB device using ehci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001860
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb 1-2: configuration #1 chosen from 1 choice
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>usb 7-2: new full speed USB device using uhci_hcd and address 2
>usb 7-2: configuration #1 chosen from 1 choice
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
>ata1.00: ATA-7: WDC WD1600BEVS-07RST0, 04.01G04, max UDMA/133
>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>ata2.00: ATAPI: TSSTcorp CDDVDW SN-S082H, SB00, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600BEVS-0 04.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-S082H  SB00 PQ: 0 ANSI: 5
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1208122313.934:2): enforcing=1 old_enforcing=0 auid=4294967295
>SELinux:8192 avtab hash slots allocated.Num of rules:219007
>SELinux:8192 avtab hash slots allocated.Num of rules:219007
>security:  8 users, 12 roles, 2385 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 219007 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1208122314.465:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>input: PC Speaker as /class/input/input3
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:08:00.0 to 64
>eth0: RTL8168b/8111b at 0xf8956000, 00:90:f5:69:d5:9e, XID 38000000 IRQ 217
>input: Power Button (FF) as /class/input/input4
>iTCO_vendor_support: vendor-support=0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Linux video capture interface: v2.00
>ACPI: Power Button (CM) [PWB]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>input: Lid Switch as /class/input/input7
>ACPI: Lid Switch [LID]
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: PCI Interrupt 0000:0c:09.0[A] -> GSI 19 (level, low) -> IRQ 19
>uvcvideo: Found UVC 1.00 device USB2.0 Camera (0402:5606)
>firewire_ohci: Added fw-ohci device 0000:0c:09.0, OHCI version 1.10
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.26kds
>iwl4965: Copyright(c) 2003-2008 Intel Corporation
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>iwl4965: Detected Intel Wireless WiFi Link 4965AGN
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
>phy0: Selected rate control algorithm 'iwl-4965-rs'
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>ACPI: PCI interrupt for device 0000:02:00.0 disabled
>sdhci: SDHCI controller found at 0000:0c:07.1 [1524:0750] (rev 0)
>ACPI: PCI Interrupt 0000:0c:07.1[A] -> GSI 16 (level, low) -> IRQ 17
>mmc0: SDHCI at 0xf0f00400 irq 17 DMA
>sdhci: SDHCI controller found at 0000:0c:07.3 [1524:0751] (rev 0)
>PCI: Enabling device 0000:0c:07.3 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:0c:07.3[A] -> GSI 16 (level, low) -> IRQ 17
>sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
>PCI: Setting latency timer of device 0000:0c:07.3 to 64
>mmc1: SDHCI at 0xf0f00100 irq 17 DMA
>ACPI: AC Adapter [AC] (off-line)
>input: Video Bus as /class/input/input8
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:732: codec_mask = 0x3
>ALSA sound/pci/hda/hda_codec.c:2162: hda_codec: model 'laptop-eapd' is selected for config 1558:0 (Clevo laptop)
>firewire_core: created device fw0: GUID 0000000000004348, S400
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>audit(1208122324.915:4): audit_pid=1785 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>r8169: eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
>[drm] Initialized drm 1.1.0 20060810
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:c0:49:e7:f6:8d
>wlan0: RX authentication from 00:c0:49:e7:f6:8d (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:c0:49:e7:f6:8d
>wlan0: RX AssocResp from 00:c0:49:e7:f6:8d (capab=0x411 status=0 aid=4)
>wlan0: associated
>wlan0: switched to long barker preamble (BSSID=00:c0:49:e7:f6:8d)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>  domain 1: span 00000003
>   groups: 00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>  domain 1: span 00000003
>   groups: 00000003
>padlock: VIA PadLock not detected.
>wlan0: no IPv6 routers present
>wlan0: disassociate(reason=3)
>wlan0: disassociate(reason=3)
>PM: suspend-to-disk mode set to 'platform'
>swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
>swsusp: Basic memory bitmaps created
>Syncing filesystems ... done.
>Freezing user space processes ... <6>ACPI: PCI interrupt for device 0000:02:00.0 disabled
>(elapsed 0.14 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>Shrinking memory...  -done (0 pages freed)
>Freed 0 kbytes in 0.13 seconds (0.00 MB/s)
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>ACPI handle has no context!
>ACPI handle has no context!
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:0c:07.3 disabled
>ACPI handle has no context!
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:0c:07.1 disabled
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>Breaking affinity for irq 1
>Breaking affinity for irq 9
>Breaking affinity for irq 14
>Clocksource tsc unstable (delta = -87082245 ns)
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>CPU1 is down
>swsusp: critical section: 
>swsusp: Need to copy 111513 pages
>swsusp: Normal pages needed: 36749 + 1024 + 40, available pages: 192525
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Enabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07bc000 soft=c079c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4190.23 BogoMIPS (lpj=2095118)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3bd 00000000 00000001 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0008e3bd 00000000 00000001 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T8100  @ 2.10GHz stepping 06
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>  domain 1: span 00000003
>   groups: 00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>  domain 1: span 00000003
>   groups: 00000003
>Switched to high resolution mode on CPU 1
>CPU1 is up
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>usb usb3: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>usb usb1: root hub lost power or was reset
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb5: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb6: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb7: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>usb usb2: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI Interrupt 0000:0c:07.1[A] -> GSI 16 (level, low) -> IRQ 17
>ACPI: PCI Interrupt 0000:0c:07.3[A] -> GSI 16 (level, low) -> IRQ 17
>psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.
>ata1.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/133
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata2.00: configured for UDMA/33
>sd 0:0:0:0: [sda] Starting disk
>PM: Image restored successfully.
>Restarting tasks ... <6>usb 1-2: USB disconnect, address 2
>done.
>swsusp: Basic memory bitmaps freed
>usb 1-2: new high speed USB device using ehci_hcd and address 3
>usb 1-2: configuration #1 chosen from 1 choice
>uvcvideo: Found UVC 1.00 device USB2.0 Camera (0402:5606)
>r8169: eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17
>usb 7-2: USB disconnect, address 2
>usb 7-2: new full speed USB device using uhci_hcd and address 3
>usb 7-2: configuration #1 chosen from 1 choice
>iwl4965: Wait for START_ALIVE timeout after 2000ms.
>ACPI: PCI interrupt for device 0000:02:00.0 disabled
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17
>iwl4965: Wait for START_ALIVE timeout after 2000ms.
>ACPI: PCI interrupt for device 0000:02:00.0 disabled
>iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.26kds
>iwl4965: Copyright(c) 2003-2008 Intel Corporation
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>iwl4965: Detected Intel Wireless WiFi Link 4965AGN
>iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
>phy0: Selected rate control algorithm 'iwl-4965-rs'
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:c0:49:e7:f6:8d
>wlan0: RX authentication from 00:c0:49:e7:f6:8d (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:c0:49:e7:f6:8d
>wlan0: RX AssocResp from 00:c0:49:e7:f6:8d (capab=0x411 status=0 aid=4)
>wlan0: associated
>wlan0: switched to long barker preamble (BSSID=00:c0:49:e7:f6:8d)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present
>wlan0: switched to short barker preamble (BSSID=00:c0:49:e7:f6:8d)
>wlan0: switched to long barker preamble (BSSID=00:c0:49:e7:f6:8d)
>wlan0: switched to short barker preamble (BSSID=00:c0:49:e7:f6:8d)
>wlan0: switched to long barker preamble (BSSID=00:c0:49:e7:f6:8d)

Actions: View

Attachments on bug 442287: 302284 | 302285