Attachment 302382 Details for Bug 290701 – dmesg output

dmesg output

dmesg.log (text/plain), 20.32 KB, created by Seán O Sullivan on 2008-04-14 18:58:40 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Seán O Sullivan

Created: 2008-04-14 18:58:40 UTC

Size: 20.32 KB

patch

obsolete

>Linux version 2.6.18-89.el5.gtest.46 (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-41)) #1 SMP Thu Apr 10 12:57:33 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
> BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
> BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
> BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f3cf0
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 524000
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 294624 pages, LIFO batch:31
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP (v000 DELL                                  ) @ 0x000f8410
>ACPI: RSDT (v001 DELL    bMk     0x42302e31 AWRD 0x00000000) @ 0x7fee3040
>ACPI: FADT (v001 DELL    bMk     0x42302e31 AWRD 0x00000000) @ 0x7fee3100
>ACPI: BOOT (v001 DELL    bMk     0x42302e31 AWRD 0x00000000) @ 0x7fee8b40
>ACPI: SSDT (v001 PTLTD  POWERNOW 0x00000001  LTP 0x00000001) @ 0x7fee8c80
>ACPI: HPET (v001 DELL    bMk     0x42302e31 AWRD 0x00000098) @ 0x7fee8f40
>ACPI: MCFG (v001 DELL    bMk     0x42302e31 AWRD 0x00000000) @ 0x7fee8fc0
>ACPI: SLIC (v001 DELL    bMk     0x42302e31 AWRD 0x0100000e) @ 0x7fee9040
>ACPI: MADT (v001 DELL    bMk     0x42302e31 AWRD 0x00000000) @ 0x7fee8bc0
>ACPI: DSDT (v001 DELL    BMK     0x00001000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:11 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:11 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x10b9a201 base: 0xfeff0000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
>Detected 2304.966 MHz processor.
>Built 1 zonelists.  Total pages: 524000
>Kernel command line: ro root=LABEL=/ rhgb quiet agp=off
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c074b000 soft=c072b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2071172k/2096000k available (2095k kernel code, 23660k reserved, 875k data, 228k init, 1178496k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>hpet0: at MMIO 0xfeff0000 (virtual 0xf8800000), IRQs 2, 8, 31
>hpet0: 3 32-bit timers, 25000000 Hz
>Using HPET for base-timer
>Calibrating delay using timer specific routine.. 4612.66 BogoMIPS (lpj=2306330)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f
>CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0(2) -> Core 0
>CPU: After all inits, caps: 178bf3ff ebd3fbff 00000000 00000410 00002001 00000000 0000011f
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c074c000 soft=c072c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4609.69 BogoMIPS (lpj=2304847)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f
>CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1(2) -> Core 1
>CPU: After all inits, caps: 178bf3ff ebd3fbff 00000000 00000410 00002001 00000000 0000011f
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 01
>Total of 2 processors activated (9222.35 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>...trying to set up timer (IRQ0) through the 8259A ...  failed.
>...trying to set up timer as Virtual Wire IRQ... failed.
>...trying to set up timer as ExtINT IRQ... works.
>checking TSC synchronization across 2 CPUs: 
>CPU#0 had 569 usecs TSC skew, fixed it up.
>CPU#1 had -569 usecs TSC skew, fixed it up.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=136 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>migration_cost=184
>checking if image is initramfs... it is
>Freeing initrd memory: 2336k freed
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>PCI: No mmconfig possible on 0:18
>PCI: Buses that can't use MMCONFIG will use type 1 PCI conf access.
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:03:00.0
>PCI: Transparent bridge - 0000:00:10.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LPMU] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 *15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 9 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
>pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:01: ioport range 0x1400-0x147f has been reserved
>pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
>pnp: 00:01: ioport range 0x1800-0x187f has been reserved
>pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
>pnp: 00:01: ioport range 0x2000-0x207f has been reserved
>pnp: 00:01: ioport range 0x2080-0x20ff has been reserved
>PCI: Bridge: 0000:00:02.0
>  IO window: a000-afff
>  MEM window: fdd00000-fddfffff
>  PREFETCH window: fda00000-fdafffff
>PCI: Bridge: 0000:00:03.0
>  IO window: 8000-8fff
>  MEM window: fd900000-fd9fffff
>  PREFETCH window: fde00000-fdefffff
>PCI: Bridge: 0000:00:04.0
>  IO window: b000-bfff
>  MEM window: f6000000-f9ffffff
>  PREFETCH window: e0000000-efffffff
>PCI: Bridge: 0000:00:10.0
>  IO window: 9000-9fff
>  MEM window: fdc00000-fdcfffff
>  PREFETCH window: fdb00000-fdbfffff
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x3a set to 0x1
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1208198288.840:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 19ABF615449ABCBC
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Detected use of extended apic ids on hypertransport bus
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>Allocate Port Service[0000:00:02.0:pcie03]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>Allocate Port Service[0000:00:03.0:pcie03]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>Allocate Port Service[0000:00:04.0:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ processors (2 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0xf (2300 MHz), vid 0x9
>powernow-k8:    1 : fid 0xe (2200 MHz), vid 0xa
>powernow-k8:    2 : fid 0xc (2000 MHz), vid 0xc
>powernow-k8:    3 : fid 0xa (1800 MHz), vid 0xe
>powernow-k8:    4 : fid 0x2 (1000 MHz), vid 0x12
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S3 S4 S5)
>Time: hpet clocksource has been installed.
>Freeing unused kernel memory: 228k freed
>Write protecting the kernel read-only data: 393k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0b.0: irq 209, io mem 0xfe02f000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:0b.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:0b.1
>ehci_hcd 0000:00:0b.1: irq 217, io mem 0xfe02e000
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 3.00 loaded.
>sata_nv 0000:00:0e.0: version 3.5
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 225
>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 225
>ohci_hcd 0000:00:0b.0: wakeup
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: ST3160812AS, 3.ADJ, max UDMA/133
>ata1.00: 312500000 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>usb 1-3: new full speed USB device using ohci_hcd and address 2
>usb 1-3: configuration #1 chosen from 1 choice
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>usb 1-6: new full speed USB device using ohci_hcd and address 3
>ata2.00: ATAPI: HL-DT-ST CD-RW/DVD-ROM GCC-H10N, C103, max UDMA/100
>usb 1-6: configuration #1 chosen from 1 choice
>ata2.00: configured for UDMA/100
>  Vendor: ATA       Model: ST3160812AS       Rev: 3.AD
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
>sd 0:0:0:0: Attached scsi disk sda
>  Vendor: HL-DT-ST  Model: CDRW/DVD GCCH10N  Rev: C103
>  Type:   CD-ROM                             ANSI SCSI revision: 05
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 233
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 233
>ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 233
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1208198295.652:2): selinux=0 auid=4294967295 ses=4294967295
>input: PC Speaker as /class/input/input0
>usbcore: registered new driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
>usbcore: registered new driver usbserial_generic
>drivers/usb/serial/usb-serial.c: USB Serial Driver core
>e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
>e1000e: Copyright (c) 1999-2007 Intel Corporation.
>ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
>ftdi_sio 1-6:1.0: FTDI USB Serial Device converter detected
>drivers/usb/serial/ftdi_sio.c: Detected FT232BM
>usb 1-6: FTDI USB Serial Device converter now attached to ttyUSB0
>usbcore: registered new driver ftdi_sio
>drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
>0000:00:02.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1b:21:00:48:51
>0000:00:02.0: eth0: Intel(R) PRO/1000 Network Connection
>0000:00:02.0: eth0: MAC: 1, PHY: 4, PBA No: d50854-003
>EDAC MC: Ver: 2.0.1 Apr 10 2008
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>Floppy drive(s): fd0 is 1.44M
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>usbcore: registered new driver snd-usb-audio
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda7, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2048248k swap on /dev/sda5.  Priority:-1 extents:1 across:2048248k
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
>0000:00:02.0: eth0: MSI interrupt test failed, using legacy interrupt.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>usb 1-7: new low speed USB device using ohci_hcd and address 4
>usb 1-7: configuration #1 chosen from 1 choice
>input: Dell Dell USB Keyboard as /class/input/input1
>input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:0b.0-7

Actions: View

Attachments on bug 290701: 195811 | 195831 | 296633 | 296673 | 296764 | 296801 | 302381 | 302382 | 303683 | 319653