Attachment 302474 Details for Bug 442561 – full dmesg

full dmesg

dmesg (text/plain), 37.47 KB, created by Adrian "Adi1981" P. on 2008-04-15 15:16:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Adrian "Adi1981" P.

Created: 2008-04-15 15:16:35 UTC

Size: 37.47 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-0.218.rc8.git7.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080404 (Red Hat 4.3.0-6) (GCC) ) #1 SMP Wed Apr 9 20:35:56 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable)
> BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
> BIOS-e820: 000000007ffae000 - 000000007fff0000 (ACPI NVS)
> BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>found SMP MP-table at [c00ff780] 000ff780
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 524192) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524192
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   524192
>On node 0 totalpages: 524192
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2303 pages used for memmap
>  HighMem zone: 292513 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000F81F0, 0024 (r2 ACPIAM)
>ACPI: XSDT 7FFA0100, 0084 (r1 _ASUS_ Notebook  9000707 MSFT       97)
>ACPI: FACP 7FFA0290, 00F4 (r3 A_M_I_ OEMFACP   9000707 MSFT       97)
>ACPI: DSDT 7FFA0680, B315 (r1  F3Sc0 F3Sc0208      208 INTL 20051117)
>ACPI: FACS 7FFAE000, 0040
>ACPI: APIC 7FFA0390, 005C (r1 A_M_I_ OEMAPIC   9000707 MSFT       97)
>ACPI: MCFG 7FFA0430, 003C (r1 A_M_I_ OEMMCFG   9000707 MSFT       97)
>ACPI: SLIC 7FFA0470, 0176 (r1 _ASUS_ Notebook  9000707 MSFT       97)
>ACPI: DBGP 7FFA03F0, 0034 (r1 A_M_I_ OEMDBGP   9000707 MSFT       97)
>ACPI: BOOT 7FFA05F0, 0028 (r1 A_M_I_ OEMBOOT   9000707 MSFT       97)
>ACPI: ECDT 7FFA0620, 0054 (r1 A_M_I_ OEMECDT   9000707 MSFT       97)
>ACPI: OEMB 7FFAE040, 0060 (r1 A_M_I_ AMI_OEM   9000707 MSFT       97)
>ACPI: HPET 7FFAB9A0, 0038 (r1 A_M_I_ OEMHPET   9000707 MSFT       97)
>ACPI: TCPA 7FFAB9E0, 0032 (r2 A_M_I_ TBLOEMID        1 MSFT       97)
>ACPI: ATKG 7FFC15D0, 8024 (r1 A_M_I_  OEMATKG  5000702 MSFT       97)
>ACPI: SSDT 7FFC9EB0, 04E6 (r1  PmRef    CpuPm     3000 INTL 20051117)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
>PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520097
>Kernel command line: ro root=UUID=73c21e5c-bfcc-4942-9608-eaa3cb0f0c2a rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07b8000 soft=c0798000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1995.048 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2071044k/2096768k available (2234k kernel code, 24488k reserved, 1119k data, 284k init, 1179264k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074e000 - 0xc0795000   ( 284 kB)
>      .data : 0xc062e899 - 0xc0746800   (1119 kB)
>      .text : 0xc0400000 - 0xc062e899   (2234 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 3992.77 BogoMIPS (lpj=1996388)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
>Booting processor 1/1 ip 4000
>CPU 1 irqstacks, hard=c07b9000 soft=c0799000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.00 BogoMIPS (lpj=1995004)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
>Total of 2 processors activated (7982.78 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3712 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 14:55:14  Date: 04/15/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at c0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=9
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: Error attaching device data
>ACPI: Error attaching device data
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *6)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 12)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 12)
>ACPI Warning (tbutils-0217): Incorrect checksum in table [ATKG] -  A7, should be 59 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x800-0x87f has been reserved
>system 00:08: ioport range 0x400-0x41f has been reserved
>system 00:08: ioport range 0x500-0x53f has been reserved
>system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
>system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
>system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:0a: ioport range 0x250-0x253 has been reserved
>system 00:0a: ioport range 0x256-0x25f has been reserved
>system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0c: iomem range 0xc0000000-0xcfffffff has been reserved
>system 00:0d: iomem range 0x0-0x9ffff could not be reserved
>system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
>system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
>system 00:0d: iomem range 0x0-0x0 could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: a000-afff
>  MEM window: 0xf7e00000-0xfdefffff
>  PREFETCH window: 0x00000000d5d00000-0x00000000f5cfffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: 0xfdf00000-0xfdffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: 0xfe000000-0xfe0fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: b000-bfff
>  MEM window: 0xfe100000-0xfe1fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: c000-cfff
>  MEM window: 0xfe200000-0xfe9fffff
>  PREFETCH window: 0x00000000f5d00000-0x00000000f7cfffff
>PCI: Bridge: 0000:00:1c.5
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: 0xfea00000-0xfeafffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2665k freed
>Simple Boot Flag at 0x52 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1208271313.491:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
>pci 0000:01:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7FFC96D0, 0286 (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
>ACPI: SSDT 7FFC99F0, 04B6 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [P001] (supports 8 throttling states)
>ACPI: SSDT 7FFC9600, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20051117)
>ACPI: SSDT 7FFC9960, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20051117)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: Processor [P002] (supports 8 throttling states)
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (37 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2
>cpuidle: using governor menu
>Marking TSC unstable due to: TSC halts in idle.
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 4:489:940
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 908k
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.218.rc8.git7.fc9.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-0.218.rc8.git7.fc9.i686 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-2: new high speed USB device using ehci_hcd and address 2
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-0.218.rc8.git7.fc9.i686 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000dc00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-0.218.rc8.git7.fc9.i686 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-2: configuration #1 chosen from 1 choice
>usb 1-2: New USB device found, idVendor=04f2, idProduct=b012
>usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
>usb 1-2: Product: USB2.0 1.3M UVC WebCam 
>usb 1-2: Manufacturer: Chicony Electronics Co., Ltd.
>usb 1-2: SerialNumber: SN0001
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-0.218.rc8.git7.fc9.i686 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25-0.218.rc8.git7.fc9.i686 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25-0.218.rc8.git7.fc9.i686 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.2
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>usb 6-2: new low speed USB device using uhci_hcd and address 2
>ata1.00: ATAPI: TSSTcorp CDDVDW TS-L632H, AS02, max UDMA/33
>usb 6-2: configuration #1 chosen from 1 choice
>input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input3
>ata1.00: configured for UDMA/33
>ata2: port disabled. ignoring.
>input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-2
>usb 6-2: New USB device found, idVendor=046d, idProduct=c019
>usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 6-2: Product: USB Optical Mouse
>usb 6-2: Manufacturer: Logitech
>scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L632H  AS02 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 20
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 20
>ata4: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 20
>usb 7-2: new full speed USB device using uhci_hcd and address 2
>usb 7-2: configuration #1 chosen from 1 choice
>usb 7-2: New USB device found, idVendor=08ff, idProduct=1600
>usb 7-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 7-2: Product: Fingerprint Sensor
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATA-8: FUJITSU MHW2160BH PL, 0000001C, max UDMA/100
>ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/100
>ata4: SATA link down (SStatus 0 SControl 0)
>scsi 2:0:0:0: Direct-Access     ATA      FUJITSU MHW2160B 0000 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
>sd 2:0:0:0: [sda] Attached SCSI disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1208271328.775:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux:8192 avtab hash slots allocated. Num of rules:171128
>SELinux:8192 avtab hash slots allocated. Num of rules:171128
>security:  8 users, 12 roles, 2293 types, 115 bools, 1 sens, 1024 cats
>security:  72 classes, 171128 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda9, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1208271329.264:3): policy loaded auid=4294967295 ses=4294967295
>Clocksource tsc unstable (delta = -154930244 ns)
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Linux video capture interface: v2.00
>asus-laptop: Asus Laptop Support version 0.42
>asus-laptop:   F3Sc model detected
>Registered led device: asus::mail
>ACPI: device:20 is registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1b/device:1c/input/input4
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>input: PC Speaker as /devices/platform/pcspkr/input/input6
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
>ACPI: Sleep Button (CM) [SLPB]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input8
>ACPI: Lid Switch [LID]
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>atl1 0000:02:00.0: version 2.0.7
>ACPI: AC Adapter [AC0] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: PCI Interrupt 0000:09:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>tpm_inf_pnp 00:0b: Found TPM with ID IFX0102
>tpm_inf_pnp 00:0b: TPM found: config base 0x254, data base 0x4700, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
>SELinux: initialized (dev securityfs, type securityfs), not configured for labeling
>ricoh-mmc: Ricoh MMC Controller disabling driver
>ricoh-mmc: Copyright(c) Philip Langdale
>firewire_ohci: Added fw-ohci device 0000:09:01.0, OHCI version 1.0
>ricoh-mmc: Ricoh MMC controller found at 0000:09:01.2 [1180:0843] (rev 12)
>ricoh-mmc: Controller is now disabled.
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.26kds
>iwl4965: Copyright(c) 2003-2008 Intel Corporation
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>iwl4965: Detected Intel Wireless WiFi Link 4965AGN
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
>phy0: Selected rate control algorithm 'iwl-4965-rs'
>usb 4-2: configuration #1 chosen from 1 choice
>usb 4-2: New USB device found, idVendor=0b05, idProduct=1712
>usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
>usb 4-2: SerialNumber: 0194E8-5B-0002
>uvcvideo: Found UVC 1.00 device USB2.0 1.3M UVC WebCam  (04f2:b012)
>input: USB2.0 1.3M UVC WebCam  as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (SVN r200)
>firewire_core: created device fw0: GUID 00e0180003ac0a93, S400
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>input: 4965AGN as /devices/pci0000:00/0000:00:1c.1/0000:03:00.0/input/input10
>sdhci: SDHCI controller found at 0000:09:01.1 [1180:0822] (rev 22)
>ACPI: PCI Interrupt 0000:09:01.1[B] -> GSI 17 (level, low) -> IRQ 17
>sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
>mmc0: SDHCI at 0xfeaff400 irq 17 DMA
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x3
>ALSA sound/pci/hda/hda_codec.c:2211: hda_codec: model 'lenovo' is selected
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: <6>Bluetooth: HCI USB driver ver 2.9
>Cannot find slave Center Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave LFE Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Line-Out Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Center Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave LFE Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave IEC958 Playback Switch, skipped
>usbcore: registered new interface driver hci_usb
>mmc0: new SD card at address bd39
>mmcblk0: mmc0:bd39 SD02G 2011136KiB 
> mmcblk0: p1
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>mtrr: base(0xe0000000) is not aligned on a size(0x7f00000) boundary
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>mtrr: no MTRR for e0000000,7f00000 found
>padlock: VIA PadLock not detected.
>padlock: VIA PadLock Hash Engine not detected.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda9, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda11, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda11, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda10, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda10, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda7, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda5, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on sda8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda8, type ext3), uses xattr
>Adding 1020088k swap on /dev/sda6.  Priority:-1 extents:1 across:1020088k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1d:7e:55:92:cb
>wlan0: RX authentication from 00:1d:7e:55:92:cb (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1d:7e:55:92:cb
>wlan0: RX AssocResp from 00:1d:7e:55:92:cb (capab=0x411 status=0 aid=5)
>wlan0: associated
>wlan0: CTS protection enabled (BSSID=00:1d:7e:55:92:cb)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>type=1400 audit(1208271369.325:4): avc:  denied  { read } for  pid=2334 comm="rsyslogd" name="System.map-2.6.25-0.218.rc8.git7.fc9.i686" dev=sda3 ino=17 scontext=system_u:system_r:syslogd_t:s0 tcontext=system_u:object_r:boot_t:s0 tclass=file
>type=1400 audit(1208271369.393:5): avc:  denied  { read } for  pid=2334 comm="rsyslogd" name="meminfo" dev=proc ino=4026531842 scontext=system_u:system_r:syslogd_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=file
>wlan0: no IPv6 routers present
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:02:72:4b:97:38
>wlan0: authenticate with AP 00:02:72:4b:97:38
>wlan0: authenticate with AP 00:02:72:4b:97:38
>wlan0: authentication with AP 00:02:72:4b:97:38 timed out
>mtrr: base(0xe0000000) is not aligned on a size(0x7f00000) boundary
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:02:72:4b:97:38
>wlan0: authenticate with AP 00:02:72:4b:97:38
>wlan0: authenticate with AP 00:02:72:4b:97:38
>wlan0: authentication with AP 00:02:72:4b:97:38 timed out
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:02:72:4b:97:38
>wlan0: authenticate with AP 00:02:72:4b:97:38
>wlan0: authenticate with AP 00:02:72:4b:97:38
>wlan0: authentication with AP 00:02:72:4b:97:38 timed out
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1d:7e:55:92:cb
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1d:7e:55:92:cb
>wlan0: RX authentication from 00:1d:7e:55:92:cb (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1d:7e:55:92:cb
>wlan0: RX AssocResp from 00:1d:7e:55:92:cb (capab=0x411 status=0 aid=5)
>wlan0: associated
>wlan0: CTS protection enabled (BSSID=00:1d:7e:55:92:cb)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present

Actions: View

Attachments on bug 442561: 302474 | 314887