Attachment 302535 Details for Bug 433932 – Output of dmesg

Output of dmesg

dmesg (text/plain), 40.47 KB, created by Frank Arnold on 2008-04-15 22:59:23 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Frank Arnold

Created: 2008-04-15 22:59:23 UTC

Size: 40.47 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-0.218.rc8.git7.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080404 (Red Hat 4.3.0-6) (GCC) ) #1 SMP Wed Apr 9 19:55:19 EDT 2008
>Command line: ro root=/dev/md0 vga=0x376 debug debug_locks_verbose=1 nmi_watchdog=2 3
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000c7fd0000 (usable)
> BIOS-e820: 00000000c7fd0000 - 00000000c7fde000 (ACPI data)
> BIOS-e820: 00000000c7fde000 - 00000000c8000000 (ACPI NVS)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000238000000 (usable)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 819152) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 2326528) 2 entries of 3200 used
>end_pfn_map = 2326528
>DMI present.
>ACPI: RSDP 000FA6D0, 0024 (r2 ACPIAM)
>ACPI: XSDT C7FD0100, 005C (r1 101107 XSDT1524 20071011 MSFT       97)
>ACPI: FACP C7FD0290, 00F4 (r3 101107 FACP1524 20071011 MSFT       97)
>ACPI: DSDT C7FD0470, 4A3D (r1  0AAAA 0AAAA000        0 INTL 20051117)
>ACPI: FACS C7FDE000, 0040
>ACPI: APIC C7FD0390, 00A0 (r1 101107 APIC1524 20071011 MSFT       97)
>ACPI: MCFG C7FD0430, 003C (r1 101107 OEMMCFG  20071011 MSFT       97)
>ACPI: OEMB C7FDE040, 0091 (r1 101107 OEMB1524 20071011 MSFT       97)
>ACPI: SRAT C7FD4EB0, 0110 (r1 AMD    HAMMER          1 AMD         1)
>ACPI: HPET C7FD4FC0, 0038 (r1 101107 OEMHPET0 20071011 MSFT       97)
>ACPI: SSDT C7FD5000, 0364 (r1 A M I  POWERNOW        1 AMD         1)
>SRAT: PXM 0 -> APIC 0 -> Node 0
>SRAT: PXM 0 -> APIC 1 -> Node 0
>SRAT: PXM 1 -> APIC 2 -> Node 1
>SRAT: PXM 1 -> APIC 3 -> Node 1
>SRAT: Node 0 PXM 0 0-a0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>SRAT: Node 0 PXM 0 0-c8000000
>Entering add_active_range(0, 0, 159) 1 entries of 3200 used
>Entering add_active_range(0, 256, 819152) 1 entries of 3200 used
>SRAT: Node 0 PXM 0 0-138000000
>Entering add_active_range(0, 0, 159) 2 entries of 3200 used
>Entering add_active_range(0, 256, 819152) 2 entries of 3200 used
>Entering add_active_range(0, 1048576, 1277952) 2 entries of 3200 used
>SRAT: Node 1 PXM 1 138000000-238000000
>Entering add_active_range(1, 1277952, 2326528) 3 entries of 3200 used
>NUMA: Allocated memnodemap from 12000 - 12100
>NUMA: Using 27 for the hash shift.
>Bootmem setup node 0 0000000000000000-0000000138000000
>  NODE_DATA [0000000000012100 - 000000000001a0ff]
>  bootmap [000000000001b000 -  0000000000041fff] pages 27
>Bootmem setup node 1 0000000138000000-0000000238000000
>  NODE_DATA [0000000138000000 - 0000000138007fff]
>  bootmap [0000000138008000 -  0000000138027fff] pages 20
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-75873b] TEXT DATA BSS
>early res: 3 [37ce2000-37fef015] RAMDISK
>early res: 4 [9fc00-a1bff] EBDA
>early res: 5 [8000-11fff] PGTABLE
>early res: 6 [12000-120ff] MEMNODEMAP
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
> [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
> [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
> [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
> [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
> [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
> [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
> [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
> [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
> [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006a00000 on node 0
> [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810006e00000 on node 0
> [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007200000 on node 0
> [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007600000 on node 0
> [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007a00000 on node 0
> [ffffe20004200000-ffffe200043fffff] PMD ->ffff810007e00000 on node 0
> [ffffe20004400000-ffffe200045fffff] PMD ->ffff810008200000 on node 0
>[ffffe20004440000-ffffe200045fffff] potential offnode page_structs
> [ffffe20004600000-ffffe200047fffff] PMD ->ffff810138200000 on node 1
> [ffffe20004800000-ffffe200049fffff] PMD ->ffff810138400000 on node 1
> [ffffe20004a00000-ffffe20004bfffff] PMD ->ffff810138600000 on node 1
> [ffffe20004c00000-ffffe20004dfffff] PMD ->ffff810138800000 on node 1
> [ffffe20004e00000-ffffe20004ffffff] PMD ->ffff810138a00000 on node 1
> [ffffe20005000000-ffffe200051fffff] PMD ->ffff810138c00000 on node 1
> [ffffe20005200000-ffffe200053fffff] PMD ->ffff810138e00000 on node 1
> [ffffe20005400000-ffffe200055fffff] PMD ->ffff810139000000 on node 1
> [ffffe20005600000-ffffe200057fffff] PMD ->ffff810139200000 on node 1
> [ffffe20005800000-ffffe200059fffff] PMD ->ffff810139400000 on node 1
> [ffffe20005a00000-ffffe20005bfffff] PMD ->ffff810139600000 on node 1
> [ffffe20005c00000-ffffe20005dfffff] PMD ->ffff810139800000 on node 1
> [ffffe20005e00000-ffffe20005ffffff] PMD ->ffff810139a00000 on node 1
> [ffffe20006000000-ffffe200061fffff] PMD ->ffff810139c00000 on node 1
> [ffffe20006200000-ffffe200063fffff] PMD ->ffff810139e00000 on node 1
> [ffffe20006400000-ffffe200065fffff] PMD ->ffff81013a000000 on node 1
> [ffffe20006600000-ffffe200067fffff] PMD ->ffff81013a200000 on node 1
> [ffffe20006800000-ffffe200069fffff] PMD ->ffff81013a400000 on node 1
> [ffffe20006a00000-ffffe20006bfffff] PMD ->ffff81013a600000 on node 1
> [ffffe20006c00000-ffffe20006dfffff] PMD ->ffff81013a800000 on node 1
> [ffffe20006e00000-ffffe20006ffffff] PMD ->ffff81013aa00000 on node 1
> [ffffe20007000000-ffffe200071fffff] PMD ->ffff81013ac00000 on node 1
> [ffffe20007200000-ffffe200073fffff] PMD ->ffff81013ae00000 on node 1
> [ffffe20007400000-ffffe200075fffff] PMD ->ffff81013b000000 on node 1
> [ffffe20007600000-ffffe200077fffff] PMD ->ffff81013b200000 on node 1
> [ffffe20007800000-ffffe200079fffff] PMD ->ffff81013b400000 on node 1
> [ffffe20007a00000-ffffe20007bfffff] PMD ->ffff81013b600000 on node 1
> [ffffe20007c00000-ffffe20007dfffff] PMD ->ffff81013b800000 on node 1
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  2326528
>Movable zone start PFN for each node
>early_node_map[4] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   819152
>    0:  1048576 ->  1277952
>    1:  1277952 ->  2326528
>On node 0 totalpages: 1048431
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1385 pages reserved
>  DMA zone: 2558 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 800776 pages, LIFO batch:31
>  Normal zone: 3136 pages used for memmap
>  Normal zone: 226240 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>On node 1 totalpages: 1048576
>  DMA zone: 0 pages used for memmap
>  DMA32 zone: 0 pages used for memmap
>  Normal zone: 14336 pages used for memmap
>  Normal zone: 1034240 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>Detected use of extended apic ids on hypertransport bus
>Detected use of extended apic ids on hypertransport bus
>ACPI: PM-Timer IO Port: 0x2008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>Processor #2
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>Processor #3
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x10de8201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>PM: Registered nosave memory: 00000000c7fd0000 - 00000000c7fde000
>PM: Registered nosave memory: 00000000c7fde000 - 00000000c8000000
>PM: Registered nosave memory: 00000000c8000000 - 00000000e0000000
>PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
>PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
>PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
>PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
>Allocating PCI resources starting at ca000000 (gap: c8000000:18000000)
>SMP: Allowing 8 CPUs, 4 hotplug CPUs
>PERCPU: Allocating 43120 bytes of per cpu data
>Built 2 zonelists in Node order, mobility grouping on.  Total pages: 2063814
>Policy zone: Normal
>Kernel command line: ro root=/dev/md0 vga=0x376 debug debug_locks_verbose=1 nmi_watchdog=2 3
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>TSC calibrated against PM_TIMER
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 2000.082 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Checking aperture...
>Node 0: aperture @ c8000000 size 128 MB
>Node 1: aperture @ c8000000 size 128 MB
>Memory: 8261692k/9306112k available (2646k kernel code, 126336k reserved, 1390k data, 352k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=8, Nodes=2
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4002.49 BogoMIPS (lpj=2001249)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 12500523
>Detected 12.500 MHz APIC timer.
>Booting processor 1/4 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4000.11 BogoMIPS (lpj=2000057)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Dual-Core AMD Opteron(tm) Processor 2212 stepping 02
>Booting processor 2/4 APIC 0x2
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 4000.12 BogoMIPS (lpj=2000062)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 2/2 -> Node 1
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 0
>Dual-Core AMD Opteron(tm) Processor 2212 stepping 02
>Booting processor 3/4 APIC 0x3
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4000.12 BogoMIPS (lpj=2000062)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 3/3 -> Node 1
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 1
>Dual-Core AMD Opteron(tm) Processor 2212 stepping 02
>Brought up 4 CPUs
>Testing NMI watchdog ... OK.
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=6256 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,0000000f
>   groups: 00000000,00000003 00000000,0000000c
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,0000000f
>   groups: 00000000,00000003 00000000,0000000c
>CPU2 attaching sched-domain:
> domain 0: span 00000000,0000000c
>  groups: 00000000,00000004 00000000,00000008
>  domain 1: span 00000000,0000000f
>   groups: 00000000,0000000c 00000000,00000003
>CPU3 attaching sched-domain:
> domain 0: span 00000000,0000000c
>  groups: 00000000,00000008 00000000,00000004
>  domain 1: span 00000000,0000000f
>   groups: 00000000,0000000c 00000000,00000003
>net_namespace: 1016 bytes
>Time: 22:30:27  Date: 04/15/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000 - efffffff
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:06.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *5
>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
>ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *10
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  EC, should be E9 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:parse DMAR table failure.
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ c8000000 size 131072 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 128MB of IOMMU area in the AGP aperture
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
>hpet0: 3 32-bit timers, 25000000 Hz
>ACPI: RTC can wake from S4
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 2
>Switched to high resolution mode on CPU 3
>system 00:07: ioport range 0x4d0-0x4d1 has been reserved
>system 00:07: ioport range 0x800-0x80f has been reserved
>system 00:07: ioport range 0x2000-0x207f has been reserved
>system 00:07: ioport range 0x2080-0x20ff has been reserved
>system 00:07: ioport range 0x2400-0x247f has been reserved
>system 00:07: ioport range 0x2480-0x24ff has been reserved
>system 00:07: ioport range 0x2800-0x287f has been reserved
>system 00:07: ioport range 0x2880-0x28ff has been reserved
>system 00:07: ioport range 0x2c00-0x2c7f has been reserved
>system 00:07: ioport range 0x2c80-0x2cff has been reserved
>system 00:07: iomem range 0xfe980000-0xfe9bffff has been reserved
>system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
>system 00:09: ioport range 0xca0-0xcaf has been reserved
>system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0c: ioport range 0xa00-0xa7f has been reserved
>system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>system 00:0e: iomem range 0xc0000-0xcffff has been reserved
>system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0e: iomem range 0x100000-0xc7ffffff could not be reserved
>system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved
>PCI: Bridge: 0000:00:06.0
>  IO window: c000-dfff
>  MEM window: 0xfea00000-0xfeafffff
>  PREFETCH window: 0x00000000f0000000-0x00000000f00fffff
>PCI: Bridge: 0000:00:0a.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0d.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0f.0
>  IO window: e000-efff
>  MEM window: 0xfeb00000-0xfebfffff
>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3124k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1208298627.667:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:00.0: Enabling HT MSI Mapping
>pci 0000:00:05.0: Enabling HT MSI Mapping
>pci 0000:00:05.1: Enabling HT MSI Mapping
>pci 0000:00:05.2: Enabling HT MSI Mapping
>pci 0000:00:06.0: Enabling HT MSI Mapping
>pci 0000:00:06.1: Enabling HT MSI Mapping
>pci 0000:00:09.0: Enabling HT MSI Mapping
>pci 0000:00:0a.0: Enabling HT MSI Mapping
>pci 0000:00:0d.0: Enabling HT MSI Mapping
>pci 0000:00:0f.0: Enabling HT MSI Mapping
>pci 0000:04:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0a.0:pcie00]
>Allocate Port Service[0000:00:0a.0:pcie01]
>Allocate Port Service[0000:00:0a.0:pcie03]
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0d.0:pcie00]
>Allocate Port Service[0000:00:0d.0:pcie01]
>Allocate Port Service[0000:00:0d.0:pcie03]
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0f.0:pcie00]
>Allocate Port Service[0000:00:0f.0:pcie01]
>Allocate Port Service[0000:00:0f.0:pcie03]
>Load service driver aer on pcie device 0000:00:0a.0:pcie01
>Load service driver aer on pcie device 0000:00:0d.0:pcie01
>Load service driver aer on pcie device 0000:00:0f.0:pcie01
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20011800000, using 15000k, total 16384k
>vesafb: mode is 1600x1200x32, linelength=6400, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
>Console: switching to colour frame buffer device 200x75
>fb0: VESA VGA frame buffer device
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: ACPI0007:02 is registered as cooling_device2
>ACPI: ACPI0007:03 is registered as cooling_device3
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 4:925:552
>  hash matches device PNP0C0F:03
>Freeing unused kernel memory: 352k freed
>Write protecting the kernel read-only data: 1116k
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe9fac00
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.218.rc8.git7.fc9.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:02.1
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe9fb000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-0.218.rc8.git7.fc9.x86_64 ohci_hcd
>usb usb2: SerialNumber: 0000:00:02.0
>USB Universal Host Controller Interface driver v3.0
>xor: automatically using best checksumming function: generic_sse
>   generic_sse:  6508.000 MB/sec
>xor: using function: generic_sse (6508.000 MB/sec)
>async_tx: api initialized (async)
>raid6: int64x1   1812 MB/s
>raid6: int64x2   2511 MB/s
>raid6: int64x4   1808 MB/s
>raid6: int64x8   1800 MB/s
>raid6: sse2x1    2761 MB/s
>raid6: sse2x2    3683 MB/s
>raid6: sse2x4    3855 MB/s
>raid6: using algorithm sse2x4 (3855 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>sata_nv 0000:00:05.0: version 3.5
>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xac00 irq 21
>ata2: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xac08 irq 21
>usb 2-5: new full speed USB device using ohci_hcd and address 2
>usb 2-5: configuration #1 chosen from 1 choice
>hub 2-5:1.0: USB hub found
>hub 2-5:1.0: 3 ports detected
>usb 2-5: New USB device found, idVendor=046d, idProduct=0b04
>usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-5: Product: Logitech BT Mini-Receiver
>usb 2-5: Manufacturer: Logitech
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133
>ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>usb 2-7: new low speed USB device using ohci_hcd and address 3
>usb 2-7: configuration #1 chosen from 1 choice
>input:   USB Multimedia Keyboard  as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.0/input/input1
>input,hidraw0: USB HID v1.00 Keyboard [  USB Multimedia Keyboard ] on usb-0000:00:02.0-7
>input:   USB Multimedia Keyboard  as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.1/input/input2
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133
>ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>input,hidraw1: USB HID v1.00 Device [  USB Multimedia Keyboard ] on usb-0000:00:02.0-7
>usb 2-7: New USB device found, idVendor=099a, idProduct=610c
>usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-7: Product: USB Multimedia Keyboard 
>ata2.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
>usb 2-7: Manufacturer:  
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 >
>sd 1:0:0:0: [sdb] Attached SCSI disk
>ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSA1] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:05.1 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa080 irq 20
>ata4: SATA max UDMA/133 cmd 0xa480 ctl 0xa400 bmdma 0xa088 irq 20
>usb 2-5.2: new full speed USB device using ohci_hcd and address 4
>usb 2-5.2: configuration #1 chosen from 1 choice
>input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5.2/2-5.2:1.0/input/input3
>input,hidraw2: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:02.0-5.2
>usb 2-5.2: New USB device found, idVendor=046d, idProduct=c713
>usb 2-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-5.2: Product: Logitech BT Mini-Receiver
>usb 2-5.2: Manufacturer: Logitech
>usb 2-5.2: SerialNumber: 0007617211F3
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133
>ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>usb 2-5.3: new full speed USB device using ohci_hcd and address 5
>usb 2-5.3: configuration #1 chosen from 1 choice
>input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5.3/2-5.3:1.0/input/input4
>input,hiddev96,hidraw3: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:02.0-5.3
>usb 2-5.3: New USB device found, idVendor=046d, idProduct=c714
>usb 2-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-5.3: Product: Logitech BT Mini-Receiver
>usb 2-5.3: Manufacturer: Logitech
>usb 2-5.3: SerialNumber: 0007617211F3
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 >
>sd 2:0:0:0: [sdc] Attached SCSI disk
>ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSA2] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:05.2 to 64
>scsi4 : sata_nv
>scsi5 : sata_nv
>ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 23
>ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 23
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata6.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
>ata6.00: configured for UDMA/100
>scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH20NS10  EL00 PQ: 0 ANSI: 5
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>md: md0 stopped.
>md: bind<sdb1>
>md: bind<sdc1>
>md: bind<sda2>
>raid5: device sda2 operational as raid disk 0
>raid5: device sdc1 operational as raid disk 2
>raid5: device sdb1 operational as raid disk 1
>raid5: allocated 3224kB for md0
>raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2
>RAID5 conf printout:
> --- rd:3 wd:3
> disk 0, o:1, dev:sda2
> disk 1, o:1, dev:sdb1
> disk 2, o:1, dev:sdc1
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1208298639.092:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux:8192 avtab hash slots allocated. Num of rules:171123
>SELinux:8192 avtab hash slots allocated. Num of rules:171123
>security:  8 users, 12 roles, 2293 types, 115 bools, 1 sens, 1024 cats
>security:  72 classes, 171123 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev md0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1208298639.794:3): policy loaded auid=4294967295 ses=4294967295
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 5:0:0:0: Attached scsi CD-ROM sr0
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
>ACPI: Power Button (CM) [PWRB]
>pata_amd 0000:00:04.0: version 0.3.10
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>scsi6 : pata_amd
>scsi7 : pata_amd
>ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sr 5:0:0:0: Attached scsi generic sg3 type 5
>ata8: port disabled. ignoring.
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
>ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth 0000:00:09.0: ifname eth0, PHY OUI 0x5043 @ 3, addr 00:e0:81:79:7f:25
>forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
>sata_inic162x 0000:01:07.0: version 0.3
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19
>scsi8 : sata_inic162x
>scsi9 : sata_inic162x
>ata9: SATA max UDMA/133 mmio m4096@0xfeafe000 port 0xfeafe000 cmd 0xd800 ctl 0xd402 irq 19
>ata10: SATA max UDMA/133 mmio m4096@0xfeafe000 port 0xfeafe040 cmd 0xd000 ctl 0xc802 irq 19
>input: PC Speaker as /devices/platform/pcspkr/input/input7
>ata9: SATA link down (SStatus 0 SControl 300)
>md: bind<sdb6>
>md: bind<sdc8>
>md: bind<sdb3>
>md: bind<sdc7>
>md: bind<sda5>
>md: bind<sda9>
>md: bind<sdc5>
>md: array md3 already has disks!
>md: bind<sda3>
>md: array md3 already has disks!
>md: bind<sdb8>
>md: bind<sda8>
>md: bind<sdc6>
>md: bind<sdb7>
>md: bind<sdc3>
>md: bind<sdb2>
>raid5: device sdb8 operational as raid disk 1
>raid5: device sda9 operational as raid disk 0
>raid5: device sdc8 operational as raid disk 2
>raid5: allocated 3224kB for md6
>raid5: raid level 5 set md6 active with 3 out of 3 devices, algorithm 2
>RAID5 conf printout:
> --- rd:3 wd:3
> disk 0, o:1, dev:sda9
> disk 1, o:1, dev:sdb8
> disk 2, o:1, dev:sdc8
>raid5: device sdb7 operational as raid disk 1
>raid5: device sda8 operational as raid disk 0
>raid5: device sdc7 operational as raid disk 2
>raid5: allocated 3224kB for md4
>raid5: raid level 5 set md4 active with 3 out of 3 devices, algorithm 2
>RAID5 conf printout:
> --- rd:3 wd:3
> disk 0, o:1, dev:sda8
> disk 1, o:1, dev:sdb7
> disk 2, o:1, dev:sdc7
>md: bind<sda7>
>raid5: device sdc3 operational as raid disk 2
>raid5: device sda5 operational as raid disk 0
>raid5: device sdb3 operational as raid disk 1
>raid5: allocated 3224kB for md5
>raid5: raid level 5 set md5 active with 3 out of 3 devices, algorithm 2
>RAID5 conf printout:
> --- rd:3 wd:3
> disk 0, o:1, dev:sda5
> disk 1, o:1, dev:sdb3
> disk 2, o:1, dev:sdc3
>md: bind<sdc2>
>raid5: device sda7 operational as raid disk 0
>raid5: device sdc6 operational as raid disk 2
>raid5: device sdb6 operational as raid disk 1
>raid5: allocated 3224kB for md2
>raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2
>RAID5 conf printout:
> --- rd:3 wd:3
> disk 0, o:1, dev:sda7
> disk 1, o:1, dev:sdb6
> disk 2, o:1, dev:sdc6
>ata10: SATA link down (SStatus 0 SControl 300)
>ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI version 1.10
>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:06.1 to 64
>ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x1
>hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2857: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2861:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2865:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2866:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:2874:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x1c, aux=0x0
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Center Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave LFE Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Line-Out Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Center Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave LFE Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave IEC958 Playback Switch, skipped
>ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:04:00.1[B] -> Link [LNEC] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:04:00.1 to 64
>ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x1001
>ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x1
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 17
>ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKD] -> GSI 17 (level, low) -> IRQ 17
>phy0: Selected rate control algorithm 'pid'
>raid5: device sdc2 operational as raid disk 2
>raid5: device sdb2 operational as raid disk 1
>raid5: device sda3 operational as raid disk 0
>raid5: allocated 3224kB for md1
>raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2
>RAID5 conf printout:
> --- rd:3 wd:3
> disk 0, o:1, dev:sda3
> disk 1, o:1, dev:sdb2
> disk 2, o:1, dev:sdc2
>Registered led device: rt61pci-phy0:radio
>Registered led device: rt61pci-phy0:assoc
>firewire_core: created device fw0: GUID 00e0810000280944, S400
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>type=1404 audit(1208298646.475:4): enforcing=0 old_enforcing=1 auid=4294967295 ses=4294967295
>type=1400 audit(1208298646.522:5): avc:  denied  { sys_tty_config } for  pid=1973 comm="sulogin" capability=26 scontext=system_u:system_r:sulogin_t:s0 tcontext=system_u:system_r:sulogin_t:s0 tclass=capability
>EXT3 FS on md0, internal journal

Actions: View

Attachments on bug 433932: 302239 | 302535 | 302584