Attachment 302590 Details for Bug 442711 – dmidecode, lspci -vvv, cpuinfo, lsmod

dmidecode, lspci -vvv, cpuinfo, lsmod

hwinfo.txt (text/plain), 59.73 KB, created by Ilkka Tengvall on 2008-04-16 12:20:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ilkka Tengvall

Created: 2008-04-16 12:20:35 UTC

Size: 59.73 KB

patch

obsolete

>------------ lspci -vvv -------------------
>
>00:00.0 Host bridge: Intel Corporation 5400 Chipset Memory Controller Hub (rev 20)
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 3
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable-
>		Address: fee00000  Data: 0000
>	Capabilities: [6c] Express (v2) Root Port (Slot-), MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal+ Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <1us, L1 <4us
>			ClockPM- Suprise+ LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [100] Advanced Error Reporting <?>
>
>00:01.0 PCI bridge: Intel Corporation 5400 Chipset PCI Express Port 1 (rev 20) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 0000f000-00000fff
>	Memory behind bridge: fff00000-000fffff
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable-
>		Address: feeff00c  Data: 4161
>	Capabilities: [6c] Express (v2) Root Port (Slot-), MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #4, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <4us
>			ClockPM- Suprise+ LLActRep+ BwNot+
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [b0] Subsystem: Tyan Computer Unknown device 5396
>	Capabilities: [100] Advanced Error Reporting <?>
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>
>00:05.0 PCI bridge: Intel Corporation 5400 Chipset PCI Express Port 5 (rev 20) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
>	I/O behind bridge: 00002000-00002fff
>	Memory behind bridge: d0200000-d02fffff
>	Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable-
>		Address: feeff00c  Data: 4169
>	Capabilities: [6c] Express (v2) Root Port (Slot-), MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #8, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <4us
>			ClockPM- Suprise+ LLActRep+ BwNot+
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [b0] Subsystem: Tyan Computer Unknown device 5396
>	Capabilities: [100] Advanced Error Reporting <?>
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>
>00:09.0 PCI bridge: Intel Corporation 5400 Chipset PCI Express Port 9 (rev 20) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=09, subordinate=10, sec-latency=0
>	I/O behind bridge: 00003000-00003fff
>	Memory behind bridge: d0000000-d01fffff
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable-
>		Address: feeff00c  Data: 4171
>	Capabilities: [6c] Express (v2) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #12, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <1us, L1 <4us
>			ClockPM- Suprise+ LLActRep+ BwNot+
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
>			Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Off, PwrInd Off, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet- LinkState+
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [b0] Subsystem: Tyan Computer Unknown device 5396
>	Capabilities: [100] Advanced Error Reporting <?>
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>
>00:10.0 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 20)
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:10.1 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 20)
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:10.2 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 20)
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:10.3 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 20)
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:10.4 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 20)
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:11.0 Host bridge: Intel Corporation 5400 Chipset CE/SF Registers (rev 20)
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:15.0 Host bridge: Intel Corporation 5400 Chipset FBD Registers (rev 20)
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:15.1 Host bridge: Intel Corporation 5400 Chipset FBD Registers (rev 20)
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:16.0 Host bridge: Intel Corporation 5400 Chipset FBD Registers (rev 20)
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:16.1 Host bridge: Intel Corporation 5400 Chipset FBD Registers (rev 20)
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:1b.0 Audio device: Intel Corporation 631xESB/632xESB High Definition Audio Controller (rev 09)
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 17
>	Region 0: Memory at d0604000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [100] Virtual Channel <?>
>	Capabilities: [130] Root Complex Link <?>
>	Kernel driver in use: HDA Intel
>	Kernel modules: snd-hda-intel
>
>00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 09) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=1f, subordinate=1f, sec-latency=0
>	I/O behind bridge: 0000f000-00000fff
>	Memory behind bridge: fff00000-000fffff
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>			ExtTag+ RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #1, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <256ns, L1 <4us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
>			Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Off, PwrInd Off, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>		Address: feeff00c  Data: 4179
>	Capabilities: [90] Subsystem: Tyan Computer Unknown device 5396
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [100] Virtual Channel <?>
>	Capabilities: [180] Root Complex Link <?>
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>
>00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09) (prog-if 00 [UHCI])
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 20
>	Region 4: I/O ports at 1800 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09) (prog-if 00 [UHCI])
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 21
>	Region 4: I/O ports at 1820 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.2 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09) (prog-if 00 [UHCI])
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 22
>	Region 4: I/O ports at 1840 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.3 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 (rev 09) (prog-if 00 [UHCI])
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 23
>	Region 4: I/O ports at 1860 [size=32]
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09) (prog-if 20 [EHCI])
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 20
>	Region 0: Memory at d0608000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port: BAR=1 offset=00a0
>	Kernel driver in use: ehci_hcd
>	Kernel modules: ehci-hcd
>
>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=20, subordinate=20, sec-latency=32
>	I/O behind bridge: 0000f000-00000fff
>	Memory behind bridge: d0300000-d03fffff
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Subsystem: Tyan Computer Unknown device 5396
>
>00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09)
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Kernel modules: iTCO_wdt, intel-rng
>
>00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller (rev 09) (prog-if 8a [Master SecP PriP])
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 20
>	Region 0: I/O ports at 01f0 [size=8]
>	Region 1: I/O ports at 03f4 [size=1]
>	Region 2: I/O ports at 0170 [size=8]
>	Region 3: I/O ports at 0374 [size=1]
>	Region 4: I/O ports at 1880 [size=16]
>	Kernel driver in use: ata_piix
>	Kernel modules: ata_piix, pata_acpi, ata_generic
>
>00:1f.2 IDE interface: Intel Corporation 631xESB/632xESB/3100 Chipset SATA IDE Controller (rev 09) (prog-if 8f [Master SecP SecO PriP PriO])
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 23
>	Region 0: I/O ports at 18c0 [size=8]
>	Region 1: I/O ports at 18b8 [size=4]
>	Region 2: I/O ports at 18b0 [size=8]
>	Region 3: I/O ports at 1894 [size=4]
>	Region 4: I/O ports at 18a0 [size=16]
>	Region 5: Memory at d0608400 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: ata_piix
>	Kernel modules: ata_piix, pata_acpi, ata_generic
>
>00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller (rev 09)
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin B routed to IRQ 23
>	Region 4: I/O ports at 1100 [size=32]
>	Kernel driver in use: i801_smbus
>	Kernel modules: i2c-i801
>
>05:00.0 VGA compatible controller: ATI Technologies Inc Radeon HD 2400 XT (prog-if 00 [VGA controller])
>	Subsystem: Giga-byte Technology Unknown device 2184
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 3
>	Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
>	Region 2: Memory at d0200000 (64-bit, non-prefetchable) [size=64K]
>	Region 4: I/O ports at 2000 [size=256]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #8, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [100] Vendor Specific Information <?>
>
>05:00.1 Audio device: ATI Technologies Inc RV610 audio device [Radeon HD 2400 PRO]
>	Subsystem: Giga-byte Technology Unknown device aa10
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin B routed to IRQ 17
>	Region 0: Memory at d0210000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
>		LnkCap:	Port #8, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [100] Vendor Specific Information <?>
>	Kernel driver in use: HDA Intel
>	Kernel modules: snd-hda-intel
>
>09:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=09, secondary=0a, subordinate=0f, sec-latency=0
>	I/O behind bridge: 00003000-00003fff
>	Memory behind bridge: d0000000-d00fffff
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [44] Express (v1) Upstream Port, MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-SlotPowerLimit 0.000000W
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [80] Subsystem: Tyan Computer Unknown device 5396
>	Capabilities: [100] Advanced Error Reporting <?>
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>
>09:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=09, secondary=10, subordinate=10, sec-latency=64
>	I/O behind bridge: 0000f000-00000fff
>	Memory behind bridge: fff00000-000fffff
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal+ Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
>			MaxPayload 128 bytes, MaxReadReq 256 bytes
>		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [6c] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [80] Subsystem: Tyan Computer Unknown device 5396
>	Capabilities: [d8] PCI-X bridge device
>		Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
>		Status: Dev=00:00.3 64bit- 133MHz- SCD- USC- SCO- SRD-
>		Upstream: Capacity=65535 CommitmentLimit=65535
>		Downstream: Capacity=65535 CommitmentLimit=65535
>	Capabilities: [100] Advanced Error Reporting <?>
>	Kernel modules: shpchp
>
>0a:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=0a, secondary=0b, subordinate=0b, sec-latency=0
>	I/O behind bridge: 0000f000-00000fff
>	Memory behind bridge: fff00000-000fffff
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [44] Express (v1) Downstream Port (Slot-), MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 2048 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 <512ns, L1 unlimited
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 00000000feeff00c  Data: 4181
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [80] Subsystem: Tyan Computer Unknown device 5396
>	Capabilities: [100] Advanced Error Reporting <?>
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>
>0a:02.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E3 (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=0a, secondary=0f, subordinate=0f, sec-latency=0
>	I/O behind bridge: 00003000-00003fff
>	Memory behind bridge: d0000000-d00fffff
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [44] Express (v1) Downstream Port (Slot-), MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- RBE- FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 2048 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 00000000feeff00c  Data: 4189
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [80] Subsystem: Tyan Computer Unknown device 5396
>	Capabilities: [100] Advanced Error Reporting <?>
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>
>0f:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01)
>	Subsystem: Intel Corporation Unknown device 0000
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 2296
>	Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=128K]
>	Region 2: I/O ports at 3000 [size=32]
>	Capabilities: [c8] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
>		Address: 00000000fee0400c  Data: 41c1
>	Capabilities: [e0] Express (v1) Endpoint, MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
>			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 512 bytes
>		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x4, ASPM unknown, Latency L0 <128ns, L1 <64us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [100] Advanced Error Reporting <?>
>	Capabilities: [140] Device Serial Number d8-02-b1-ff-ff-81-e0-00
>	Kernel driver in use: e1000e
>	Kernel modules: e1000e
>
>0f:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01)
>	Subsystem: Intel Corporation Unknown device 0000
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin B routed to IRQ 2297
>	Region 0: Memory at d0020000 (32-bit, non-prefetchable) [size=128K]
>	Region 2: I/O ports at 3020 [size=32]
>	Capabilities: [c8] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
>		Address: 00000000fee4000c  Data: 41b9
>	Capabilities: [e0] Express (v1) Endpoint, MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
>			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 512 bytes
>		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x4, ASPM unknown, Latency L0 <128ns, L1 <64us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [100] Advanced Error Reporting <?>
>	Capabilities: [140] Device Serial Number d8-02-b1-ff-ff-81-e0-00
>	Kernel driver in use: e1000e
>	Kernel modules: e1000e
>
>20:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
>	Subsystem: Tyan Computer Unknown device 5396
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at d0304000 (32-bit, non-prefetchable) [size=2K]
>	Region 1: Memory at d0300000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>	Kernel driver in use: firewire_ohci
>	Kernel modules: firewire-ohci
>
>------------ dmidecode -------------------
>
>
># dmidecode 2.9
>SMBIOS 2.5 present.
>43 structures occupying 1364 bytes.
>Table at 0xBFF46000.
>
>Handle 0x0000, DMI type 0, 24 bytes
>BIOS Information
>	Vendor: Phoenix Technologies LTD
>	Version: 1.01.5396
>	Release Date: 03/12/2008
>	Address: 0xE3810
>	Runtime Size: 116720 bytes
>	ROM Size: 1024 kB
>	Characteristics:
>		ISA is supported
>		PCI is supported
>		PC Card (PCMCIA) is supported
>		PNP is supported
>		APM is supported
>		BIOS is upgradeable
>		BIOS shadowing is allowed
>		ESCD support is available
>		Boot from PC Card (PCMCIA) is supported
>		EDD is supported
>		USB legacy is supported
>		Smart battery is supported
>		BIOS boot specification is supported
>		Targeted content distribution is supported
>
>Handle 0x0001, DMI type 1, 27 bytes
>System Information
>	Manufacturer: empty
>	Product Name: empty
>	Version: empty
>	Serial Number: empty
>	UUID: Not Settable
>	Wake-up Type: Power Switch
>	SKU Number: Not Specified
>	Family: Not Specified
>
>Handle 0x0002, DMI type 2, 8 bytes
>Base Board Information
>	Manufacturer: TYAN Computer Corporation
>	Product Name: S5396
>	Version: empty
>	Serial Number: empty
>
>Handle 0x0003, DMI type 3, 17 bytes
>Chassis Information
>	Manufacturer: No Enclosure
>	Type: Other
>	Lock: Not Present
>	Version: N/A
>	Serial Number: None
>	Asset Tag: No Asset Tag
>	Boot-up State: Safe
>	Power Supply State: Safe
>	Thermal State: Safe
>	Security Status: None
>	OEM Information: 0x00001234
>
>Handle 0x0004, DMI type 4, 40 bytes
>Processor Information
>	Socket Designation: LGA771
>	Type: Central Processor
>	Family: Unknown
>	Manufacturer: Intel
>	ID: 76 06 01 00 FF FB EB BF
>	Version:   
>	Voltage: 1.4 V
>	External Clock: Unknown
>	Max Speed: 3200 MHz
>	Current Speed: 2500 MHz
>	Status: Populated, Enabled
>	Upgrade: Slot 1
>	L1 Cache Handle: 0x0006
>	L2 Cache Handle: 0x0007
>	L3 Cache Handle: Not Provided
>	Serial Number: Not Specified
>	Asset Tag: Not Specified
>	Part Number: Not Specified
>	Core Count: 4
>	Core Enabled: 4
>	Thread Count: 4
>	Characteristics:
>		64-bit capable
>
>Handle 0x0005, DMI type 4, 40 bytes
>Processor Information
>	Socket Designation: LGA771
>	Type: Central Processor
>	Family: Unknown
>	Manufacturer: Intel
>	ID: 76 06 01 00 FF FB EB BF
>	Version:   
>	Voltage: 1.4 V
>	External Clock: Unknown
>	Max Speed: 3200 MHz
>	Current Speed: 2500 MHz
>	Status: Populated, Enabled
>	Upgrade: Slot 1
>	L1 Cache Handle: 0x0008
>	L2 Cache Handle: 0x0009
>	L3 Cache Handle: Not Provided
>	Serial Number: Not Specified
>	Asset Tag: Not Specified
>	Part Number: Not Specified
>	Core Count: 4
>	Core Enabled: 4
>	Thread Count: 4
>	Characteristics: None
>
>Handle 0x0006, DMI type 7, 19 bytes
>Cache Information
>	Socket Designation: L1 Cache
>	Configuration: Enabled, Socketed, Level 1
>	Operational Mode: Write Back
>	Location: Internal
>	Installed Size: 32 KB
>	Maximum Size: 32 KB
>	Supported SRAM Types:
>		Burst
>		Pipeline Burst
>		Asynchronous
>	Installed SRAM Type: Asynchronous
>	Speed: Unknown
>	Error Correction Type: Unknown
>	System Type: Unknown
>	Associativity: Unknown
>
>Handle 0x0007, DMI type 7, 19 bytes
>Cache Information
>	Socket Designation: L2 Cache
>	Configuration: Enabled, Socketed, Level 2
>	Operational Mode: Write Back
>	Location: Internal
>	Installed Size: 12288 KB
>	Maximum Size: 12288 KB
>	Supported SRAM Types:
>		Burst
>		Pipeline Burst
>		Asynchronous
>	Installed SRAM Type: Burst
>	Speed: Unknown
>	Error Correction Type: Unknown
>	System Type: Unknown
>	Associativity: Unknown
>
>Handle 0x0008, DMI type 7, 19 bytes
>Cache Information
>	Socket Designation: L1 Cache
>	Configuration: Enabled, Socketed, Level 1
>	Operational Mode: Write Back
>	Location: Internal
>	Installed Size: 32 KB
>	Maximum Size: 32 KB
>	Supported SRAM Types:
>		Burst
>		Pipeline Burst
>		Asynchronous
>	Installed SRAM Type: Asynchronous
>	Speed: Unknown
>	Error Correction Type: Unknown
>	System Type: Unknown
>	Associativity: Unknown
>
>Handle 0x0009, DMI type 7, 19 bytes
>Cache Information
>	Socket Designation: L2 Cache
>	Configuration: Enabled, Socketed, Level 2
>	Operational Mode: Write Back
>	Location: Internal
>	Installed Size: 12288 KB
>	Maximum Size: 12288 KB
>	Supported SRAM Types:
>		Burst
>		Pipeline Burst
>		Asynchronous
>	Installed SRAM Type: Burst
>	Speed: Unknown
>	Error Correction Type: Unknown
>	System Type: Unknown
>	Associativity: Unknown
>
>Handle 0x000A, DMI type 7, 19 bytes
>Cache Information
>	Socket Designation: L1 Cache
>	Configuration: Enabled, Socketed, Level 1
>	Operational Mode: Write Back
>	Location: Internal
>	Installed Size: 32 KB
>	Maximum Size: 32 KB
>	Supported SRAM Types:
>		Burst
>		Pipeline Burst
>		Asynchronous
>	Installed SRAM Type: Asynchronous
>	Speed: Unknown
>	Error Correction Type: Unknown
>	System Type: Unknown
>	Associativity: Unknown
>
>Handle 0x000B, DMI type 7, 19 bytes
>Cache Information
>	Socket Designation: L2 Cache
>	Configuration: Enabled, Socketed, Level 2
>	Operational Mode: Write Back
>	Location: Internal
>	Installed Size: 12288 KB
>	Maximum Size: 12288 KB
>	Supported SRAM Types:
>		Burst
>		Pipeline Burst
>		Asynchronous
>	Installed SRAM Type: Burst
>	Speed: Unknown
>	Error Correction Type: Unknown
>	System Type: Unknown
>	Associativity: Unknown
>
>Handle 0x000C, DMI type 7, 19 bytes
>Cache Information
>	Socket Designation: L1 Cache
>	Configuration: Enabled, Socketed, Level 1
>	Operational Mode: Write Back
>	Location: Internal
>	Installed Size: 32 KB
>	Maximum Size: 32 KB
>	Supported SRAM Types:
>		Burst
>		Pipeline Burst
>		Asynchronous
>	Installed SRAM Type: Asynchronous
>	Speed: Unknown
>	Error Correction Type: Unknown
>	System Type: Unknown
>	Associativity: Unknown
>
>Handle 0x000D, DMI type 7, 19 bytes
>Cache Information
>	Socket Designation: L2 Cache
>	Configuration: Enabled, Socketed, Level 2
>	Operational Mode: Write Back
>	Location: Internal
>	Installed Size: 12288 KB
>	Maximum Size: 12288 KB
>	Supported SRAM Types:
>		Burst
>		Pipeline Burst
>		Asynchronous
>	Installed SRAM Type: Burst
>	Speed: Unknown
>	Error Correction Type: Unknown
>	System Type: Unknown
>	Associativity: Unknown
>
>Handle 0x000E, DMI type 8, 9 bytes
>Port Connector Information
>	Internal Reference Designator: J19
>	Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
>	External Reference Designator: COM 1
>	External Connector Type: DB-9 male
>	Port Type: Serial Port 16550A Compatible
>
>Handle 0x000F, DMI type 8, 9 bytes
>Port Connector Information
>	Internal Reference Designator: J23
>	Internal Connector Type: 25 Pin Dual Inline (pin 26 cut)
>	External Reference Designator: Parallel
>	External Connector Type: DB-25 female
>	Port Type: Parallel Port ECP/EPP
>
>Handle 0x0010, DMI type 8, 9 bytes
>Port Connector Information
>	Internal Reference Designator: J11
>	Internal Connector Type: None
>	External Reference Designator: Keyboard
>	External Connector Type: Circular DIN-8 male
>	Port Type: Keyboard Port
>
>Handle 0x0011, DMI type 8, 9 bytes
>Port Connector Information
>	Internal Reference Designator: J12
>	Internal Connector Type: None
>	External Reference Designator: PS/2 Mouse
>	External Connector Type: Circular DIN-8 male
>	Port Type: Keyboard Port
>
>Handle 0x0012, DMI type 9, 13 bytes
>System Slot Information
>	Designation: PCI SLOT1
>	Type: 32-bit PCI
>	Current Usage: Available
>	Length: Long
>	ID: 1
>	Characteristics:
>		5.0 V is provided
>		3.3 V is provided
>
>Handle 0x0013, DMI type 9, 13 bytes
>System Slot Information
>	Designation: PCI SLOT2
>	Type: 64-bit PCI-X
>	Current Usage: Available
>	Length: Long
>	ID: 2
>	Characteristics:
>		5.0 V is provided
>		3.3 V is provided
>
>Handle 0x0014, DMI type 9, 13 bytes
>System Slot Information
>	Designation: PCI SLOT3
>	Type: 64-bit PCI-X
>	Current Usage: Available
>	Length: Long
>	ID: 3
>	Characteristics:
>		5.0 V is provided
>		3.3 V is provided
>
>Handle 0x0015, DMI type 9, 13 bytes
>System Slot Information
>	Designation: PCIE x16
>	Type: 16-bit PCI Express
>	Current Usage: Available
>	Length: Long
>	ID: 4
>	Characteristics:
>		5.0 V is provided
>		3.3 V is provided
>
>Handle 0x0016, DMI type 9, 13 bytes
>System Slot Information
>	Designation: PCIE x8
>	Type: 8-bit PCI Express
>	Current Usage: Available
>	Length: Long
>	ID: 5
>	Characteristics:
>		5.0 V is provided
>		3.3 V is provided
>
>Handle 0x0017, DMI type 9, 13 bytes
>System Slot Information
>	Designation: PCIE x16
>	Type: 16-bit PCI Express
>	Current Usage: In Use
>	Length: Long
>	ID: 6
>	Characteristics:
>		5.0 V is provided
>		3.3 V is provided
>
>Handle 0x0018, DMI type 10, 6 bytes
>On Board Device Information
>	Type: Sound
>	Status: Disabled
>	Description: RealTek
>
>Handle 0x0019, DMI type 11, 5 bytes
>OEM Strings
>	String 1: Seaburg
>	String 2: S5396
>
>Handle 0x001A, DMI type 12, 5 bytes
>System Configuration Options
>	Option 1: Jumper settings can be described here.
>
>Handle 0x001B, DMI type 15, 29 bytes
>System Event Log
>	Area Length: 32 bytes
>	Header Start Offset: 0x0000
>	Header Length: 16 bytes
>	Data Start Offset: 0x0010
>	Access Method: General-purpose non-volatile data functions
>	Access Address: 0x0000
>	Status: Valid, Not Full
>	Change Token: 0x0000001C
>	Header Format: Type 1
>	Supported Log Type Descriptors: 3
>	Descriptor 1: POST error
>	Data Format 1: POST results bitmap
>	Descriptor 2: Single-bit ECC memory error
>	Data Format 2: Multiple-event
>	Descriptor 3: Multi-bit ECC memory error
>	Data Format 3: Multiple-event
>
>Handle 0x001C, DMI type 16, 15 bytes
>Physical Memory Array
>	Location: System Board Or Motherboard
>	Use: System Memory
>	Error Correction Type: None
>	Maximum Capacity: 64 GB
>	Error Information Handle: Not Provided
>	Number Of Devices: 8
>
>Handle 0x001D, DMI type 17, 27 bytes
>Memory Device
>	Array Handle: 0x001C
>	Error Information Handle: No Error
>	Total Width: 72 bits
>	Data Width: 64 bits
>	Size: 4096 MB
>	Form Factor: DIMM
>	Set: 1
>	Locator: DIMM1
>	Bank Locator: DIMM1
>	Type: DDR2
>	Type Detail: Synchronous
>	Speed: 667 MHz (1.5 ns)
>	Manufacturer: Not Specified
>	Serial Number: Not Specified
>	Asset Tag: Not Specified
>	Part Number: Not Specified
>
>Handle 0x001E, DMI type 17, 27 bytes
>Memory Device
>	Array Handle: 0x001C
>	Error Information Handle: No Error
>	Total Width: 72 bits
>	Data Width: 64 bits
>	Size: 4096 MB
>	Form Factor: DIMM
>	Set: 1
>	Locator: DIMM2
>	Bank Locator: DIMM2
>	Type: DDR2
>	Type Detail: Synchronous
>	Speed: 667 MHz (1.5 ns)
>	Manufacturer: Not Specified
>	Serial Number: Not Specified
>	Asset Tag: Not Specified
>	Part Number: Not Specified
>
>Handle 0x001F, DMI type 17, 27 bytes
>Memory Device
>	Array Handle: 0x001C
>	Error Information Handle: No Error
>	Total Width: 72 bits
>	Data Width: 64 bits
>	Size: 4096 MB
>	Form Factor: DIMM
>	Set: 1
>	Locator: DIMM3
>	Bank Locator: DIMM3
>	Type: DDR2
>	Type Detail: Synchronous
>	Speed: 667 MHz (1.5 ns)
>	Manufacturer: Not Specified
>	Serial Number: Not Specified
>	Asset Tag: Not Specified
>	Part Number: Not Specified
>
>Handle 0x0020, DMI type 17, 27 bytes
>Memory Device
>	Array Handle: 0x001C
>	Error Information Handle: No Error
>	Total Width: 72 bits
>	Data Width: 64 bits
>	Size: 4096 MB
>	Form Factor: DIMM
>	Set: 1
>	Locator: DIMM4
>	Bank Locator: DIMM4
>	Type: DDR2
>	Type Detail: Synchronous
>	Speed: 667 MHz (1.5 ns)
>	Manufacturer: Not Specified
>	Serial Number: Not Specified
>	Asset Tag: Not Specified
>	Part Number: Not Specified
>
>Handle 0x0021, DMI type 17, 27 bytes
>Memory Device
>	Array Handle: 0x001C
>	Error Information Handle: No Error
>	Total Width: Unknown
>	Data Width: Unknown
>	Size: No Module Installed
>	Form Factor: DIMM
>	Set: 1
>	Locator: DIMM5
>	Bank Locator: DIMM5
>	Type: DDR2
>	Type Detail: Synchronous
>	Speed: 667 MHz (1.5 ns)
>	Manufacturer: Not Specified
>	Serial Number: Not Specified
>	Asset Tag: Not Specified
>	Part Number: Not Specified
>
>Handle 0x0022, DMI type 17, 27 bytes
>Memory Device
>	Array Handle: 0x001C
>	Error Information Handle: No Error
>	Total Width: Unknown
>	Data Width: Unknown
>	Size: No Module Installed
>	Form Factor: DIMM
>	Set: 1
>	Locator: DIMM6
>	Bank Locator: DIMM6
>	Type: DDR2
>	Type Detail: Synchronous
>	Speed: 667 MHz (1.5 ns)
>	Manufacturer: Not Specified
>	Serial Number: Not Specified
>	Asset Tag: Not Specified
>	Part Number: Not Specified
>
>Handle 0x0023, DMI type 17, 27 bytes
>Memory Device
>	Array Handle: 0x001C
>	Error Information Handle: No Error
>	Total Width: Unknown
>	Data Width: Unknown
>	Size: No Module Installed
>	Form Factor: DIMM
>	Set: 1
>	Locator: DIMM7
>	Bank Locator: DIMM7
>	Type: DDR2
>	Type Detail: Synchronous
>	Speed: 667 MHz (1.5 ns)
>	Manufacturer: Not Specified
>	Serial Number: Not Specified
>	Asset Tag: Not Specified
>	Part Number: Not Specified
>
>Handle 0x0024, DMI type 17, 27 bytes
>Memory Device
>	Array Handle: 0x001C
>	Error Information Handle: No Error
>	Total Width: Unknown
>	Data Width: Unknown
>	Size: No Module Installed
>	Form Factor: DIMM
>	Set: 1
>	Locator: DIMM8
>	Bank Locator: DIMM8
>	Type: DDR2
>	Type Detail: Synchronous
>	Speed: 667 MHz (1.5 ns)
>	Manufacturer: Not Specified
>	Serial Number: Not Specified
>	Asset Tag: Not Specified
>	Part Number: Not Specified
>
>Handle 0x0025, DMI type 19, 15 bytes
>Memory Array Mapped Address
>	Starting Address: 0x00000000000
>	Ending Address: 0x003FFFFFFFF
>	Range Size: 16 GB
>	Physical Array Handle: 0x001C
>	Partition Width: 0
>
>Handle 0x0026, DMI type 20, 19 bytes
>Memory Device Mapped Address
>	Starting Address: 0x00000000000
>	Ending Address: 0x000FFFFFFFF
>	Range Size: 4 GB
>	Physical Device Handle: 0x001D
>	Memory Array Mapped Address Handle: 0x0025
>	Partition Row Position: Unknown
>	Interleave Position: Unknown
>	Interleaved Data Depth: Unknown
>
>Handle 0x0027, DMI type 20, 19 bytes
>Memory Device Mapped Address
>	Starting Address: 0x00100000000
>	Ending Address: 0x001FFFFFFFF
>	Range Size: 4 GB
>	Physical Device Handle: 0x001E
>	Memory Array Mapped Address Handle: 0x0025
>	Partition Row Position: Unknown
>	Interleave Position: Unknown
>	Interleaved Data Depth: Unknown
>
>Handle 0x0028, DMI type 32, 20 bytes
>System Boot Information
>	Status: <OUT OF SPEC>
>
>Handle 0x0029, DMI type 38, 18 bytes
>IPMI Device Information
>	Interface Type: KCS (Keyboard Control Style)
>	Specification Version: 1.0
>	I2C Slave Address: 0x00
>	NV Storage Device: Not Present
>	Base Address: 0x0000000000000000 (Memory-mapped)
>	Register Spacing: 32-bit Boundaries
>	Interrupt Polarity: Active Low
>	Interrupt Trigger Mode: Edge
>
>Handle 0x002A, DMI type 127, 4 bytes
>End Of Table
>
>------------ cpuinfo -------------------
>
>processor	: 0
>vendor_id	: GenuineIntel
>cpu family	: 6
>model		: 23
>model name	: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz
>stepping	: 6
>cpu MHz		: 2000.000
>cache size	: 6144 KB
>physical id	: 0
>siblings	: 4
>core id		: 0
>cpu cores	: 4
>fpu		: yes
>fpu_exception	: yes
>cpuid level	: 10
>wp		: yes
>flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
>bogomips	: 4989.75
>clflush size	: 64
>cache_alignment	: 64
>address sizes	: 38 bits physical, 48 bits virtual
>power management:
>
>processor	: 1
>vendor_id	: GenuineIntel
>cpu family	: 6
>model		: 23
>model name	: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz
>stepping	: 6
>cpu MHz		: 2000.000
>cache size	: 6144 KB
>physical id	: 1
>siblings	: 4
>core id		: 0
>cpu cores	: 4
>fpu		: yes
>fpu_exception	: yes
>cpuid level	: 10
>wp		: yes
>flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
>bogomips	: 4987.54
>clflush size	: 64
>cache_alignment	: 64
>address sizes	: 38 bits physical, 48 bits virtual
>power management:
>
>processor	: 2
>vendor_id	: GenuineIntel
>cpu family	: 6
>model		: 23
>model name	: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz
>stepping	: 6
>cpu MHz		: 2000.000
>cache size	: 6144 KB
>physical id	: 0
>siblings	: 4
>core id		: 1
>cpu cores	: 4
>fpu		: yes
>fpu_exception	: yes
>cpuid level	: 10
>wp		: yes
>flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
>bogomips	: 4987.53
>clflush size	: 64
>cache_alignment	: 64
>address sizes	: 38 bits physical, 48 bits virtual
>power management:
>
>processor	: 3
>vendor_id	: GenuineIntel
>cpu family	: 6
>model		: 23
>model name	: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz
>stepping	: 6
>cpu MHz		: 2000.000
>cache size	: 6144 KB
>physical id	: 1
>siblings	: 4
>core id		: 1
>cpu cores	: 4
>fpu		: yes
>fpu_exception	: yes
>cpuid level	: 10
>wp		: yes
>flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
>bogomips	: 4987.54
>clflush size	: 64
>cache_alignment	: 64
>address sizes	: 38 bits physical, 48 bits virtual
>power management:
>
>processor	: 4
>vendor_id	: GenuineIntel
>cpu family	: 6
>model		: 23
>model name	: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz
>stepping	: 6
>cpu MHz		: 2000.000
>cache size	: 6144 KB
>physical id	: 0
>siblings	: 4
>core id		: 2
>cpu cores	: 4
>fpu		: yes
>fpu_exception	: yes
>cpuid level	: 10
>wp		: yes
>flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
>bogomips	: 4987.51
>clflush size	: 64
>cache_alignment	: 64
>address sizes	: 38 bits physical, 48 bits virtual
>power management:
>
>processor	: 5
>vendor_id	: GenuineIntel
>cpu family	: 6
>model		: 23
>model name	: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz
>stepping	: 6
>cpu MHz		: 2000.000
>cache size	: 6144 KB
>physical id	: 1
>siblings	: 4
>core id		: 2
>cpu cores	: 4
>fpu		: yes
>fpu_exception	: yes
>cpuid level	: 10
>wp		: yes
>flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
>bogomips	: 4987.54
>clflush size	: 64
>cache_alignment	: 64
>address sizes	: 38 bits physical, 48 bits virtual
>power management:
>
>processor	: 6
>vendor_id	: GenuineIntel
>cpu family	: 6
>model		: 23
>model name	: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz
>stepping	: 6
>cpu MHz		: 2000.000
>cache size	: 6144 KB
>physical id	: 0
>siblings	: 4
>core id		: 3
>cpu cores	: 4
>fpu		: yes
>fpu_exception	: yes
>cpuid level	: 10
>wp		: yes
>flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
>bogomips	: 4987.52
>clflush size	: 64
>cache_alignment	: 64
>address sizes	: 38 bits physical, 48 bits virtual
>power management:
>
>processor	: 7
>vendor_id	: GenuineIntel
>cpu family	: 6
>model		: 23
>model name	: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz
>stepping	: 6
>cpu MHz		: 2000.000
>cache size	: 6144 KB
>physical id	: 1
>siblings	: 4
>core id		: 3
>cpu cores	: 4
>fpu		: yes
>fpu_exception	: yes
>cpuid level	: 10
>wp		: yes
>flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm
>bogomips	: 4987.54
>clflush size	: 64
>cache_alignment	: 64
>address sizes	: 38 bits physical, 48 bits virtual
>power management:
>
>------------ lsmod -------------------
>
>Module                  Size  Used by
>vmnet                  42560  15 
>vmmon                 992524  10 
>ipt_MASQUERADE         11392  1 
>iptable_nat            14608  1 
>nf_nat                 25752  2 ipt_MASQUERADE,iptable_nat
>bridge                 59304  0 
>bnep                   21632  2 
>rfcomm                 44448  4 
>l2cap                  29312  16 bnep,rfcomm
>bluetooth              59044  5 bnep,rfcomm,l2cap
>autofs4                28424  2 
>coretemp               14976  0 
>w83627ehf              30608  0 
>hwmon_vid              11008  1 w83627ehf
>adt7470                29456  0 
>hwmon                  11064  3 coretemp,w83627ehf,adt7470
>sunrpc                185128  3 
>ib_iser                38376  0 
>rdma_cm                33636  1 ib_iser
>ib_cm                  39704  1 rdma_cm
>iw_cm                  16904  1 rdma_cm
>ib_sa                  27760  2 rdma_cm,ib_cm
>ib_mad                 42280  2 ib_cm,ib_sa
>ib_core                56064  6 ib_iser,rdma_cm,ib_cm,iw_cm,ib_sa,ib_mad
>ib_addr                14600  1 rdma_cm
>iscsi_tcp              26116  0 
>libiscsi               32896  2 ib_iser,iscsi_tcp
>scsi_transport_iscsi    39072  4 ib_iser,iscsi_tcp,libiscsi
>ipt_REJECT             11776  4 
>nf_conntrack_ipv4      17416  5 iptable_nat
>iptable_filter         11392  1 
>ip_tables              25232  2 iptable_nat,iptable_filter
>ip6t_REJECT            12544  2 
>xt_tcpudp              11648  6 
>nf_conntrack_ipv6      22984  2 
>xt_state               10752  5 
>nf_conntrack           64528  6 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4,nf_conntrack_ipv6,xt_state
>ip6table_filter        11264  1 
>ip6_tables             26640  1 ip6table_filter
>x_tables               26248  8 ipt_MASQUERADE,iptable_nat,ipt_REJECT,ip_tables,ip6t_REJECT,xt_tcpudp,xt_state,ip6_tables
>cpufreq_ondemand       15760  4 
>acpi_cpufreq           16656  5 
>freq_table             13440  2 cpufreq_ondemand,acpi_cpufreq
>loop                   23044  0 
>dm_multipath           24976  0 
>ipv6                  276360  40 ip6t_REJECT,nf_conntrack_ipv6
>snd_hda_intel         447540  4 
>snd_seq_dummy          11524  0 
>snd_seq_oss            39232  0 
>snd_seq_midi_event     15104  1 snd_seq_oss
>snd_seq                61840  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>i2c_i801               17692  0 
>i2c_core               28448  2 adt7470,i2c_i801
>iTCO_wdt               19920  0 
>ppdev                  15624  0 
>parport_pc             33816  0 
>iTCO_vendor_support    11780  1 iTCO_wdt
>firewire_ohci          29060  0 
>firewire_core          44352  1 firewire_ohci
>e1000e                100516  0 
>snd_seq_device         15508  3 snd_seq_dummy,snd_seq_oss,snd_seq
>snd_pcm_oss            52096  0 
>tpm_infineon           17084  0 
>tpm                    21424  1 tpm_infineon
>snd_mixer_oss          23296  1 snd_pcm_oss
>snd_pcm                86024  2 snd_hda_intel,snd_pcm_oss
>snd_timer              29584  2 snd_seq,snd_pcm
>snd_page_alloc         16912  2 snd_hda_intel,snd_pcm
>snd_hwdep              16520  1 snd_hda_intel
>shpchp                 38428  0 
>snd                    66808  18 snd_hda_intel,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
>button                 15776  0 
>tpm_bios               14592  1 tpm
>soundcore              14864  1 snd
>sg                     40528  0 
>crc_itu_t              10368  1 firewire_core
>parport                42784  2 ppdev,parport_pc
>pcspkr                 11136  0 
>sr_mod                 23604  0 
>cdrom                  40616  1 sr_mod
>floppy                 66216  0 
>dm_snapshot            23624  0 
>dm_zero                10240  0 
>dm_mirror              31876  0 
>dm_mod                 61720  12 dm_multipath,dm_snapshot,dm_zero,dm_mirror
>ata_piix               28932  4 
>pata_acpi              13824  0 
>ata_generic            14596  0 
>libata                148768  3 ata_piix,pata_acpi,ata_generic
>sd_mod                 33200  7 
>scsi_mod              150232  8 ib_iser,iscsi_tcp,libiscsi,scsi_transport_iscsi,sg,sr_mod,libata,sd_mod
>ext3                  129680  3 
>jbd                    52904  1 ext3
>mbcache                15876  1 ext3
>uhci_hcd               29984  0 
>ohci_hcd               28804  0 
>ehci_hcd               40460  0

Actions: View

Attachments on bug 442711: 302590