Attachment 302931 Details for Bug 442853 – Fedora 8 dmesg

Fedora 8 dmesg

dmesg-f8.txt (text/plain), 33.91 KB, created by Jonathan Roberts on 2008-04-18 19:45:32 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jonathan Roberts

Created: 2008-04-18 19:45:32 UTC

Size: 33.91 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.4-64.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sat Mar 29 09:54:46 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007dd31000 (usable)
> BIOS-e820: 000000007dd31000 - 000000007df32000 (ACPI NVS)
> BIOS-e820: 000000007df32000 - 000000007dfe5000 (ACPI data)
> BIOS-e820: 000000007dfe5000 - 000000007dfe7000 (ACPI NVS)
> BIOS-e820: 000000007dfe7000 - 000000007eec3000 (ACPI data)
> BIOS-e820: 000000007eec3000 - 000000007eec5000 (ACPI NVS)
> BIOS-e820: 000000007eec5000 - 000000007eec8000 (ACPI data)
> BIOS-e820: 000000007eec8000 - 000000007eecb000 (ACPI NVS)
> BIOS-e820: 000000007eecb000 - 000000007eecc000 (ACPI data)
> BIOS-e820: 000000007eecc000 - 000000007eedf000 (ACPI NVS)
> BIOS-e820: 000000007eedf000 - 000000007eef9000 (ACPI data)
> BIOS-e820: 000000007eef9000 - 000000007eeff000 (reserved)
> BIOS-e820: 000000007eeff000 - 000000007ef00000 (ACPI data)
> BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
>1117MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 515377) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   515377
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   515377
>On node 0 totalpages: 515377
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2234 pages used for memmap
>  HighMem zone: 283767 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000FE020, 0024 (r2 APPLE )
>ACPI: XSDT 7EEEE1C0, 0084 (r1 APPLE   Apple00       C1       1000013)
>ACPI: FACP 7EEEC000, 00F4 (r3 APPLE   Apple00       C1 Loki       5F)
>ACPI: DSDT 7EEE1000, 45C6 (r1 APPLE   MacBook    40001 INTL 20061109)
>ACPI: FACS 7EECC000, 0040
>ACPI: HPET 7EEEB000, 0038 (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: APIC 7EEEA000, 0068 (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: MCFG 7EEE9000, 003C (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: ASF! 7EEE8000, 00A5 (r32 APPLE   Apple00        1 Loki       5F)
>ACPI: SBST 7EEE7000, 0030 (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: ECDT 7EEE6000, 0053 (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: SSDT 7EEC7000, 04DC (r1  APPLE    CpuPm     3000 INTL 20061109)
>ACPI: SSDT 7EEC6000, 025F (r1  APPLE  Cpu0Tst     3000 INTL 20061109)
>ACPI: SSDT 7EEC5000, 00A6 (r1  APPLE  Cpu1Tst     3000 INTL 20061109)
>ACPI: SSDT 7EEE0000, 0544 (r1 SataRe  SataPri     1000 INTL 20061109)
>ACPI: SSDT 7EEDF000, 0477 (r1 SataRe  SataSec     1000 INTL 20061109)
>ACPI: DMI BIOS year==0, assuming ACPI-capable machine
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 7:7 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 7:7 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 511351
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07bb000 soft=c079b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2394.029 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2035080k/2061508k available (2237k kernel code, 25196k reserved, 1131k data, 288k init, 1144004k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0750000 - 0xc0798000   ( 288 kB)
>      .data : 0xc062f789 - 0xc074a724   (1131 kB)
>      .text : 0xc0400000 - 0xc062f789   (2237 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4791.85 BogoMIPS (lpj=2395929)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0008e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07bc000 soft=c079c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4787.94 BogoMIPS (lpj=2393973)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0008e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz stepping 06
>Total of 2 processors activated (9579.80 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>net_namespace: 64 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 19:39:07  Date: 04/18/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: DMI System Vendor: Apple Inc.
>ACPI: DMI Product Name: MacBook4,1
>ACPI: DMI Product Version: 1.0
>ACPI: DMI Board Name: Mac-F22788A9
>ACPI: DMI BIOS Vendor: Apple Inc.
>ACPI: DMI BIOS Date: 02/09/08
>ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
>ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0500-053f claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
>system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
>system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
>system 00:07: ioport range 0x680-0x69f has been reserved
>system 00:07: ioport range 0x800-0x80f has been reserved
>system 00:07: ioport range 0x810-0x817 has been reserved
>system 00:07: ioport range 0x400-0x47f has been reserved
>system 00:07: ioport range 0x500-0x53f has been reserved
>system 00:07: ioport range 0x1640-0x164f has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: 90600000-906fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: 90500000-905fffff
>  PREFETCH window: 90000000-900fffff
>PCI: Bridge: 0000:00:1c.5
>  IO window: 5000-5fff
>  MEM window: 90400000-904fffff
>  PREFETCH window: 90800000-908fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: 90300000-903fffff
>  PREFETCH window: disabled.
>PCI: Enabling device 0000:00:1c.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3638k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1208547547.455:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key A149FFC6EE301D40
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7EECAA98, 0340 (r1  APPLE  Cpu0Ist     3000 INTL 20061109)
>ACPI: SSDT 7EEC8C18, 02AD (r1  APPLE  Cpu0Cst     3001 INTL 20061109)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7EEC9F18, 00C8 (r1  APPLE  Cpu1Ist     3000 INTL 20061109)
>ACPI: SSDT 7EEC8F18, 0085 (r1  APPLE  Cpu1Cst     3000 INTL 20061109)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 965GM Chipset.
>agpgart: Detected 15868K stolen memory.
>agpgart: AGP aperture is 256M @ 0x80000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>i8042.c: No controller found.
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>Marking TSC unstable due to: TSC halts in idle.
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 4:488:698
>Freeing unused kernel memory: 288k freed
>Write protecting the kernel read-only data: 894k
>Time: hpet clocksource has been installed.
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 21 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0x90704c00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0x90704800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 19, io base 0x000060c0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 16, io base 0x000060a0
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 2-4: new high speed USB device using ehci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006060
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb 2-4: configuration #1 chosen from 1 choice
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 21 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>input: HID 05ac:1000 as /class/input/input1
>input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1a.0-1
>input: HID 05ac:1000 as /class/input/input2
>input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1a.0-1
>usb 7-1: new low speed USB device using uhci_hcd and address 2
>usb 7-1: configuration #1 chosen from 1 choice
>hiddev96hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1
>usb 7-2: new full speed USB device using uhci_hcd and address 3
>usb 7-2: configuration #1 chosen from 1 choice
>input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input3
>input,hidraw3: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2
>input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input4
>input,hidraw4: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 21 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x6108 ctl 0x6124 bmdma 0x60e0 irq 18
>ata2: PATA max UDMA/100 cmd 0x6100 ctl 0x6120 bmdma 0x60e8 irq 18
>ata1.00: ATAPI: HL-DT-ST DVDRW  GSA-S10N, BP10, max UDMA/33
>ata1.00: configured for UDMA/33
>scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRW  GSA-S10N  BP10 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x60f8 ctl 0x611c bmdma 0x6020 irq 20
>ata4: SATA max UDMA/133 cmd 0x60f0 ctl 0x6118 bmdma 0x6028 irq 20
>ata3.00: ATA-8: Hitachi HTS542516K9SA00, BBCAC3GP, max UDMA/133
>ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      Hitachi HTS54251 BBCA PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 2:0:0:0: [sda] Attached SCSI disk
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1208547556.655:2): enforcing=1 old_enforcing=0 auid=4294967295
>SELinux:8192 avtab hash slots allocated.Num of rules:219007
>SELinux:8192 avtab hash slots allocated.Num of rules:219007
>security:  8 users, 12 roles, 2385 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 219007 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1208547557.171:3): policy loaded auid=4294967295
>Clocksource tsc unstable (delta = -75233796 ns)
>usb 2-4: USB disconnect, address 2
>ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>ndiswrapper: using IRQ 16
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 47x/47x writer cd/rw xa/form2 cdda caddy
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>wlan0: ethernet device 00:1e:c2:ae:85:9d using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4328.5.conf
>wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
>usbcore: registered new interface driver ndiswrapper
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>sky2 0000:03:00.0: v1.20 addr 0x90400000 irq 17 Yukon-EC Ultra (0xb4) rev 3
>sky2 eth0: addr 00:1f:5b:e9:32:e1
>udev: renamed network interface eth0 to eth1
>input: PC Speaker as /class/input/input5
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 20 (level, low) -> IRQ 19
>iTCO_vendor_support: vendor-support=0
>ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 19 (level, low) -> IRQ 21
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI version 1.0
>appletouch: Geyser mode initialized.
>input: appletouch as /class/input/input6
>usbcore: registered new interface driver appletouch
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: AC Adapter [ADP1] (off-line)
>input: Video Bus as /class/input/input7
>input: Power Button (FF) as /class/input/input8
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input9
>ACPI: Lid Switch [LID0]
>input: Power Button (CM) as /class/input/input10
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input11
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:732: codec_mask = 0x1
>ALSA sound/pci/hda/hda_codec.c:2137: hda_codec: model 'mbp3' is selected
>usb 2-4: new high speed USB device using ehci_hcd and address 5
>firewire_core: created device fw0: GUID 001ff3fffe11ed76, S400
>usb 2-4: configuration #1 chosen from 1 choice
>Linux video capture interface: v2.00
>uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
>uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>applesmc: Apple MacBook detected:
>applesmc:  - Model with accelerometer
>applesmc:  - Model without light sensors and backlight
>applesmc:  - Model with 10 temperature sensors
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: wait status failed: c != 18
>applesmc: failed to init the device
>applesmc: 1 fans found.
>applesmc: wait status failed: c != 18
>input: applesmc as /class/input/input12
>applesmc: driver successfully loaded.
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>appletouch: incomplete data package (first byte: 2, length: 4).
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>audit(1208547585.120:4): audit_pid=1940 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>usb 3-1: USB disconnect, address 2
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>usb 3-1: new full speed USB device using uhci_hcd and address 3
>usb 3-1: configuration #1 chosen from 1 choice
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>sky2 eth1: enabling interface
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[drm] Initialized drm 1.1.0 20060810
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>  domain 1: span 00000003
>   groups: 00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>  domain 1: span 00000003
>   groups: 00000003
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present

Actions: View

Attachments on bug 442853: 302723 | 302724 | 302931 | 303295 | 303337