Attachment 302965 Details for Bug 442163 – dmesg dump of udevd general protection problems

dmesg dump of udevd general protection problems

dmesg.txt (text/plain), 15.16 KB, created by Kris Arndt on 2008-04-19 03:03:29 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Kris Arndt

Created: 2008-04-19 03:03:29 UTC

Size: 15.16 KB

patch

obsolete

> udevd[b7fea000+19000]
>input: PC Speaker as /devices/platform/pcspkr/input/input2
>udevd[675] general protection ip:b7fee56e sp:bfdfec70 error:c380 in udevd[b7fea000+19000]
>udevd[680] general protection ip:b7fee56e sp:bfdfec70 error:c380 in udevd[b7fea000+19000]
>squashfs: version 3.3 (2007/10/31) Phillip Lougher
>SCSI subsystem initialized
>Loading iSCSI transport class v2.0-869.
>iscsi: registered transport (tcp)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>libata version 3.00 loaded.
>udevd used greatest stack depth: 2404 bytes left
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.121.rc5.git4.fc9 uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-0.121.rc5.git4.fc9 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.2 to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-0.121.rc5.git4.fc9 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.2
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-0.121.rc5.git4.fc9 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-2: configuration #1 chosen from 1 choice
>usb 1-2: New USB device found, idVendor=05dc, idProduct=a400
>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-2: Product: JUMPDRIVE PRO
>usb 1-2: Manufacturer: LEXAR MEDIA
>usb 1-2: SerialNumber: 33000000517000005074
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-0.121.rc5.git4.fc9 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25-0.121.rc5.git4.fc9 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>sky2 0000:02:00.0: v1.21 addr 0xfe9fc000 irq 17 Yukon-EC Ultra (0xb4) rev 3
>modprobe used greatest stack depth: 1856 bytes left
>sky2 eth0: addr 00:1e:8c:89:82:ce
>PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.1 to 64
>scsi0 : pata_jmicron
>scsi1 : pata_jmicron
>ata1: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 17
>ata2: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 17
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>ata1.00: ATA-7: ST3500630A, 3.AAE, max UDMA/100
>ata1.00: 976773168 sectors, multi 0: LBA48 
>ata1.01: ATAPI: TSSTcorp CDDVDW SH-S202J, SB01, max UDMA/66
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/66
>scsi 0:0:0:0: Direct-Access     ATA      ST3500630A       3.AA PQ: 0 ANSI: 5
>scsi 0:0:1:0: CD-ROM            TSSTcorp CDDVDW SH-S202J  SB01 PQ: 0 ANSI: 5
>ahci 0000:03:00.0: version 3.0
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>printk: 362 messages suppressed.
>udevd[1350] general protection ip:b7fee56e sp:bfdfec70 error:c380 in udevd[b7fea000+19000]
>ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>scsi3 : ahci
>scsi4 : ahci
>ata3: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
>ata4: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI version 1.0
>ata_piix 0000:00:1f.2: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi5 : ata_piix
>scsi6 : ata_piix
>ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
>ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
>ata5: SATA link down (SStatus 0 SControl 300)
>firewire_core: created device fw0: GUID 001e8c00001e410d, S400
>ata6: SATA link down (SStatus 0 SControl 300)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 22 (level, low) -> IRQ 22
>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>scsi7 : ata_piix
>scsi8 : ata_piix
>ata7: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
>ata8: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
>ata7: SATA link down (SStatus 0 SControl 300)
>ata8: SATA link down (SStatus 0 SControl 300)
>Driver 'sd' needs updating - please use bus_type methods
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Driver 'sr' needs updating - please use bus_type methods
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>modprobe used greatest stack depth: 1628 bytes left
>sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 0:0:1:0: Attached scsi generic sg1 type 5
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     LEXAR    JUMPDRIVE PRO    1000 PQ: 0 ANSI: 0 CCS
>sd 2:0:0:0: [sdb] 506880 512-byte hardware sectors (260 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
>sd 2:0:0:0: [sdb] 506880 512-byte hardware sectors (260 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 2:0:0:0: [sdb] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>printk: 55 messages suppressed.
>udevd[1451] general protection ip:b7fee56e sp:bfdfdbe0 error:c380 in udevd[b7fea000+19000]
>udevd[1453] general protection ip:b7fee56e sp:bfdfdbe0 error:c380 in udevd[b7fea000+19000]
>udevd[1455] general protection ip:b7fee56e sp:bfdfec70 error:c380 in udevd[b7fea000+19000]
>udevd[1457] general protection ip:b7fee56e sp:bfdfec70 error:c380 in udevd[b7fea000+19000]
>udevd[1459] general protection ip:b7fee56e sp:bfdfdbe0 error:c380 in udevd[b7fea000+19000]
>udevd[1460] general protection ip:b7fee56e sp:bfdfdbe0 error:c380 in udevd[b7fea000+19000]
>mount.nfs used greatest stack depth: 1124 bytes left
>udevd[1462] general protection ip:b7fee56e sp:bfdfec70 error:c380 in udevd[b7fea000+19000]
>udevd[1464] general protection ip:b7fee56e sp:bfdfec70 error:c380 in udevd[b7fea000+19000]
>udevd[1466] general protection ip:b7fee56e sp:bfdfdbe0 error:c380 in udevd[b7fea000+19000]
>udevd[1467] general protection ip:b7fee56e sp:bfdfdbe0 error:c380 in udevd[b7fea000+19000]
>ISOFS: Unable to identify CD-ROM format.
>udevd[1470] general protection ip:b7fee56e sp:bfdfec70 error:c380 in udevd[b7fea000+19000]
>udevd[1471] general protection ip:b7fee56e sp:bfdfec70 error:c380 in udevd[b7fea000+19000]
>udevd[1472] general protection ip:b7fee56e sp:bfdfdbe0 error:c380 in udevd[b7fea000+19000]
>udevd[1473] general protection ip:b7fee56e sp:bfdfdbe0 error:c380 in udevd[b7fea000+19000]
>VFS: Can't find an ext2 filesystem on dev loop0.
>udevd[1476] general protection ip:b7fee56e sp:bfdfec70 error:c380 in udevd[b7fea000+19000]
>udevd[1478] general protection ip:b7fee56e sp:bfdfec70 error:c380 in udevd[b7fea000+19000]
>udevd[1479] general protection ip:b7fee56e sp:bfdfdbe0 error:c380 in udevd[b7fea000+19000]
>udevd[1480] general protection ip:b7fee56e sp:bfdfdbe0 error:c380 in udevd[b7fea000+19000]
>SELinux:8192 avtab hash slots allocated. Num of rules:155000
>SELinux:8192 avtab hash slots allocated. Num of rules:155000
>security:  5 users, 12 roles, 2274 types, 110 bools, 1 sens, 1024 cats
>security:  72 classes, 155000 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
>SELinux: initialized (dev 0:13, type nfs), uses genfs_contexts
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>md: raid0 personality registered for level 0
>md: raid1 personality registered for level 1
>xor: automatically using best checksumming function: pIII_sse
>   pIII_sse  : 12012.000 MB/sec
>xor: using function: pIII_sse (12012.000 MB/sec)
>async_tx: api initialized (async)
>raid6: int32x1    875 MB/s
>raid6: int32x2    929 MB/s
>raid6: int32x4    679 MB/s
>raid6: int32x8    648 MB/s
>raid6: mmxx1     3085 MB/s
>raid6: mmxx2     3128 MB/s
>raid6: sse1x1    2039 MB/s
>raid6: sse1x2    2574 MB/s
>raid6: sse2x1    3710 MB/s
>raid6: sse2x2    4078 MB/s
>raid6: using algorithm sse2x2 (4078 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>md: raid10 personality registered for level 10
>md: linear personality registered for level -1
>GFS2 (built Mar 14 2008 22:51:21) installed
>Lock_Nolock (built Mar 14 2008 22:51:32) installed
>JFS: nTxBlock = 8192, nTxLock = 65536
>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
>SGI XFS Quota Management subsystem
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>device-mapper: multipath round-robin: version 1.0.0 loaded
>device-mapper: multipath emc: version 0.0.3 loaded
>warning: process `anaconda' used the deprecated sysctl system call with 1.23.
>printk: 71 messages suppressed.
>udevd[1774] general protection ip:b7fee56e sp:bfdfdbe0 error:c380 in udevd[b7fea000+19000]
>udevd[1776] general protection ip:b7fee56e sp:bfdfdbe0 error:c380 in udevd[b7fea000+19000]
>udevd[1777] general protection ip:b7fee56e sp:bfdfec70 error:c380 in udevd[b7fea000+19000]
>udevd[1779] general protection ip:b7fee56e sp:bfdfec70 error:c380 in udevd[b7fea000+19000]

Actions: View

Attachments on bug 442163: 302201 | 302965 | 302968