Attachment 302999 Details for Bug 443227 – dmesg output

dmesg output

latitude_c600_dmesg.txt (text/plain), 20.75 KB, created by Pat Kane on 2008-04-19 13:28:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Pat Kane

Created: 2008-04-19 13:28:43 UTC

Size: 20.75 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-0.234.rc9.git1.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080404 (Red Hat 4.3.0-6) (GCC) ) #1 SMP Tue Apr 15 18:37:15 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000bfdb000 (usable)
> BIOS-e820: 000000000bfdb000 - 000000000c000000 (reserved)
> BIOS-e820: 00000000100a0000 - 0000000010100000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>191MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 49115) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->    49115
>  HighMem     49115 ->    49115
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->    49115
>On node 0 totalpages: 49115
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 351 pages used for memmap
>  Normal zone: 44668 pages, LIFO batch:7
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F4C00, 0014 (r0 DELL  )
>ACPI: RSDT 0BFF0000, 0028 (r1 DELL    CPi R   27D30708 ASL        61)
>ACPI: FACP 0BFF0400, 0074 (r1 DELL    CPi R   27D30708 ASL        61)
>ACPI: DSDT 0BFF0800, 2ACA (r1 INT430 SYSFexxx     1001 MSFT  100000E)
>ACPI: FACS 0BFFF800, 0040
>ACPI: PM-Timer IO Port: 0x808
>Allocating PCI resources starting at 20000000 (gap: 10100000:efd00000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 48732
>Kernel command line: ro root=UUID=e0591912-e028-4514-a36f-22a7ba7c78ea rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffb000 (0118c000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07b8000 soft=c0798000
>PID hash table entries: 1024 (order: 10, 4096 bytes)
>Detected 751.720 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Memory: 186948k/196460k available (2234k kernel code, 8956k reserved, 1119k data, 284k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xcc800000 - 0xff3fe000   ( 811 MB)
>    lowmem  : 0xc0000000 - 0xcbfdb000   ( 191 MB)
>      .init : 0xc074e000 - 0xc0795000   ( 284 kB)
>      .data : 0xc062ea6d - 0xc0746800   (1119 kB)
>      .text : 0xc0400000 - 0xc062ea6d   (2234 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 1504.58 BogoMIPS (lpj=752293)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 20k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0820)
>CPU0: Intel Pentium III (Coppermine) stepping 06
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3712 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  6:18:42  Date: 04/19/08
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver 
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfc13e, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:07.3: quirk: region 0800-083f claimed by PIIX4 ACPI
>pci 0000:00:07.3: quirk: region 0840-084f claimed by PIIX4 SMB
>pci 0000:00:07.3: PIIX4 devres B PIO at 00e0-00e7
>pci 0000:00:07.3: PIIX4 devres C PIO at 0850-085f
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
>ACPI: Power Resource [PADA] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>system 00:00: iomem range 0x0-0x9fbff could not be reserved
>system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xcffff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0xbfeffff could not be reserved
>system 00:00: iomem range 0xbff0000-0xbffffff could not be reserved
>system 00:00: iomem range 0x100a0000-0x100fffff could not be reserved
>system 00:00: iomem range 0xffe00000-0xffffffff could not be reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x800-0x805 has been reserved
>system 00:02: ioport range 0x808-0x80f has been reserved
>system 00:02: ioport range 0x854-0x855 has been reserved
>system 00:03: ioport range 0x806-0x807 has been reserved
>system 00:03: ioport range 0x850-0x853 has been reserved
>system 00:03: ioport range 0x856-0x85f has been reserved
>system 00:03: ioport range 0x810-0x83f has been reserved
>system 00:03: ioport range 0x840-0x84f has been reserved
>system 00:03: ioport range 0x600-0x67f has been reserved
>system 00:03: ioport range 0x680-0x6ff has been reserved
>system 00:04: ioport range 0xf000-0xf0fe has been reserved
>system 00:04: ioport range 0xf100-0xf1fe has been reserved
>system 00:04: ioport range 0xf200-0xf2fe has been reserved
>system 00:04: ioport range 0xf400-0xf4fe has been reserved
>system 00:04: ioport range 0xf500-0xf5fe has been reserved
>system 00:04: ioport range 0xf600-0xf6fe has been reserved
>system 00:04: ioport range 0xf800-0xf8fe has been reserved
>system 00:04: ioport range 0xf900-0xf9fe has been reserved
>system 00:04: ioport range 0xfa00-0xfafe has been reserved
>system 00:04: ioport range 0xfc00-0xfcfe has been reserved
>system 00:04: ioport range 0xfd00-0xfdfe has been reserved
>system 00:04: ioport range 0xfe00-0xfefe has been reserved
>system 00:04: iomem range 0xed000000-0xedffffff has been reserved
>system 00:09: ioport range 0x3f0-0x3f1 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: e000-efff
>  MEM window: 0xfd000000-0xfeffffff
>  PREFETCH window: 0x00000000f8000000-0x00000000fbffffff
>PCI: Bus 2, cardbus bridge: 0000:00:03.0
>  IO window: 0x00001000-0x000010ff
>  IO window: 0x00001400-0x000014ff
>  PREFETCH window: 0x20000000-0x23ffffff
>  MEM window: 0x24000000-0x27ffffff
>PCI: Bus 6, cardbus bridge: 0000:00:03.1
>  IO window: 0x00001800-0x000018ff
>  IO window: 0x00001c00-0x00001cff
>  PREFETCH window: 0x28000000-0x2bffffff
>  MEM window: 0x2c000000-0x2fffffff
>PCI: Enabling device 0000:00:03.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Enabling device 0000:00:03.1 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 8192 bind 8192)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 2637k freed
>Dell Latitude C600 machine detected. Mousepad Resume Bug workaround hopefully not needed.
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1208585923.053:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:00.0: Limiting direct PCI/PCI transfers
>pci 0000:01:00.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THM] (46 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: AGP aperture is 64M @ 0xf4000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>Yenta: CardBus bridge found at 0000:00:03.0 [1028:00b1]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:03.0, mfunc 0x01261222, devctl 0x64
>Yenta: ISA IRQ mask 0x04b8, PCI irq 11
>Socket status: 30000006
>Yenta: CardBus bridge found at 0000:00:03.1 [1028:00b1]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:03.1, mfunc 0x01261222, devctl 0x64
>Yenta: ISA IRQ mask 0x04b8, PCI irq 11
>Socket status: 30000006
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one day
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 4:320:317
>  hash matches device tty42
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 908k
>Marking TSC unstable due to: TSC halts in idle.
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dce0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 uhci_hcd
>usb usb1: SerialNumber: 0000:00:07.2
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>Synaptics Touchpad, model: 1, fw: 5.5, id: 0x9b58b1, caps: 0x804793/0x0
>serio: Synaptics pass-through port at isa0060/serio1/input0
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
>ata_piix 0000:00:07.1: version 2.12
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x860 irq 14
>ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x868 irq 15
>ata1.00: ATA-4: IBM-DARA-206000, AR2OA54A, max UDMA/66
>ata1.00: 11733120 sectors, multi 8: LBA 
>ata1.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      IBM-DARA-206000  AR2O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 11733120 512-byte hardware sectors (6007 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 11733120 512-byte hardware sectors (6007 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>IBM TrackPoint firmware: 0x0b, buttons: 2/3
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1208585932.017:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
>SELinux:8192 avtab hash slots allocated. Num of rules:172102
>SELinux:8192 avtab hash slots allocated. Num of rules:172102
>security:  8 users, 12 roles, 2300 types, 115 bools, 1 sens, 1024 cats
>security:  72 classes, 172102 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1208585936.044:3): policy loaded auid=4294967295 ses=4294967295
>Clocksource tsc unstable (delta = -172579389 ns)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>3c59x: Donald Becker and others.
>0000:00:10.0: 3Com PCI 3c556 Laptop Tornado at cc822c00.
>input: PC Speaker as /devices/platform/pcspkr/input/input4
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery present)
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:07/device:08/input/input5
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input8
>ACPI: Sleep Button (CM) [SBTN]
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>parport_pc 00:0e: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>udev: renamed network interface eth0 to eth1
>ppdev: user-space parallel port driver
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on sda1, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 738980k swap on /dev/sda2.  Priority:-1 extents:1 across:738980k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (3072 buckets, 12288 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>eth1:  setting half-duplex.
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-1: New USB device found, idVendor=0930, idProduct=6540
>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-1: Product: USB Flash Memory
>usb 1-1: SerialNumber: 03616B60F00359D4
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access              USB Flash Memory 6.50 PQ: 0 ANSI: 0 CCS
>sd 2:0:0:0: [sdb] 3903487 512-byte hardware sectors (1999 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
>sd 2:0:0:0: [sdb] 3903487 512-byte hardware sectors (1999 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 2:0:0:0: [sdb] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts

Actions: View

Attachments on bug 443227: 302999 | 303361 | 303362 | 303389