Attachment 303220 Details for Bug 443226 – output of dmesg

output of dmesg

dmesg.txt (text/plain), 20.50 KB, created by Matěj Cepl on 2008-04-21 22:21:38 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Matěj Cepl

Created: 2008-04-21 22:21:38 UTC

Size: 20.50 KB

patch

obsolete

>Linux version 2.6.24.4 (root@midas) (gcc version 4.2.3) #2 Thu Mar 27 00:23:03 CDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001c000000 (usable)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>448MB LOWMEM available.
>Entering add_active_range(0, 0, 114688) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   114688
>  HighMem    114688 ->   114688
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   114688
>On node 0 totalpages: 114688
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 864 pages used for memmap
>  Normal zone: 109728 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.2 present.
>ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to enable ACPI
>ACPI: Disabling ACPI support
>Allocating PCI resources starting at 20000000 (gap: 1c000000:e3ff0000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113792
>Kernel command line: auto BOOT_IMAGE=Linux ro root=341 vt.default_utf8=0
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 997.496 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 445672k/458752k available (5823k kernel code, 12588k reserved, 1947k data, 340k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfffe8000 - 0xfffff000   (  92 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xdc800000 - 0xff7fe000   ( 559 MB)
>    lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
>      .init : 0xc089a000 - 0xc08ef000   ( 340 kB)
>      .data : 0xc06afcdc - 0xc089695c   (1947 kB)
>      .text : 0xc0100000 - 0xc06afcdc   (5823 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 1997.23 BogoMIPS (lpj=3994470)
>Security Framework initialized
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU serial number disabled.
>CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>CPU: Intel Pentium III (Coppermine) stepping 0a
>Checking 'hlt' instruction... OK.
>Freeing SMP alternatives: 0k freed
>net_namespace: 64 bytes
>xor: automatically using best checksumming function: pIII_sse
>   pIII_sse  :  2006.000 MB/sec
>xor: using function: pIII_sse (2006.000 MB/sec)
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xfb1b0, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 4000-40ff claimed by vt82c586 ACPI
>PCI quirk: region 6000-607f claimed by vt82c686 HW-mon
>PCI quirk: region 5000-500f claimed by vt82c686 SMB
>PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: e8000000-e9ffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>Time: tsc clocksource has been installed.
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>NTFS driver 2.1.29 [Flags: R/W].
>JFS: nTxBlock = 3482, nTxLock = 27861
>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
>SGI XFS Quota Management subsystem
>GFS2 (built Mar 27 2008 00:20:29) installed
>async_tx: api initialized (async)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xd0000000, mapped to 0xdca80000, using 1536k, total 16384k
>vesafb: mode is 1024x768x8, linelength=1024, pages=20
>vesafb: protected mode interface info at c000:5777
>vesafb: pmi: set display start = c00c580b, set palette = c00c5857
>vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4 
>vesafb: scrolling: redraw
>vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>loop: module loaded
>Compaq SMART2 Driver (v 2.6.0)
>HP CISS Driver (v 3.6.14)
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller (0x1106:0x0571 rev 0x10) at  PCI slot 0000:00:07.1
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1
>    ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hdb: MAXTOR STM3160212A, ATA DISK drive
>hda: Maxtor 6L120P0, ATA DISK drive
>hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/66 mode selected
>hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>hdb: UDMA/66 mode selected
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdd: HL-DT-STDVD-RAM GSA-H58N, ATAPI CD/DVD-ROM drive
>hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
>hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>hdc: UDMA/33 mode selected
>hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>hdd: host side 80-wire cable detection failed, limiting max speed to UDMA33
>hdd: UDMA/33 mode selected
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 240121728 sectors (122942 MB) w/8192KiB Cache, CHS=65535/16/63
>hda: cache flushes supported
> hda: hda1 hda2 < hda5 hda6 hda7 >
>hdb: max request size: 512KiB
>hdb: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63
>hdb: cache flushes supported
> hdb: hdb1 hdb2 hdb3 hdb4
>hdc: ATAPI 52X DVD-ROM drive, 256kB Cache
>Uniform CD-ROM driver Revision: 3.20
>hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
>ide-floppy driver 0.99.newide
>Loading iSCSI transport class v2.0-724.
>Loading Adaptec I2O RAID: Version 2.4 Build 5go
>Detecting Adaptec I2O RAID controllers...
>PCI: setting IRQ 11 as level-triggered
>PCI: Found IRQ 11 for device 0000:00:0b.0
>PCI: Sharing IRQ 11 with 0000:00:07.2
>scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
>        <Adaptec 2940 Ultra SCSI adapter>
>        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
>
>Adaptec aacraid driver 1.1-5[2449]-ms
>aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>scsi: <fdomain> Detection failed (no card)
>sym53c416.c: Version 1.0.0-ac
>qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
>iscsi: registered transport (qla4xxx)
>QLogic iSCSI HBA Driver
>Emulex LightPulse Fibre Channel SCSI driver 8.2.2
>Copyright(c) 2004-2007 Emulex.  All rights reserved.
>seagate: ST0x/TMC-8xx not detected.
>Failed initialization of WD-7000 SCSI card!
>DC390: clustering now enabled by default. If you get problems load
>	with "disable_clustering=1" and report to maintainers
>megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
>megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
>megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
>GDT-HA: Storage RAID Controller Driver. Version: 3.05
>GDT-HA: Found 0 PCI Storage RAID Controllers
>3ware Storage Controller device driver for Linux v1.26.02.002.
>3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
>nsp32: loading...
>ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
>RocketRAID 3xxx SATA Controller driver v1.2 (070830)
>st: Version 20070203, fixed bufsize 32768, s/g segs 256
>Driver 'st' needs updating - please use bus_type methods
>Clocksource tsc unstable (delta = 196022216 ns)
>Time: pit clocksource has been installed.
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>I2O subsystem v1.325
>i2o: max drivers = 8
>I2O Configuration OSM v1.323
>I2O Bus Adapter OSM v1.317
>I2O Block Device OSM v1.325
>I2O SCSI Peripheral OSM v1.316
>I2O ProcFS OSM v1.316
>Fusion MPT base driver 3.04.06
>Copyright (c) 1999-2007 LSI Corporation
>Fusion MPT SPI Host driver 3.04.06
>Fusion MPT FC Host driver 3.04.06
>Fusion MPT SAS Host driver 3.04.06
>PCI: setting IRQ 9 as level-triggered
>PCI: Found IRQ 9 for device 0000:00:0c.0
>PCI: Sharing IRQ 9 with 0000:00:0a.0
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9]  MMIO=[eb003000-eb0037ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>usbmon: debugfs is not available
>116x: driver isp116x-hcd, 03 Nov 2005
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>PCI: Found IRQ 11 for device 0000:00:07.2
>PCI: Sharing IRQ 11 with 0000:00:0b.0
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 11, io base 0x0000a400
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>sl811: driver sl811-hcd, 19 May 2005
>Initializing USB Mass Storage driver...
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>usb 1-2: configuration #1 chosen from 1 choice
>scsi3 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: linear personality registered for level -1
>md: raid0 personality registered for level 0
>md: raid1 personality registered for level 1
>md: raid10 personality registered for level 10
>raid6: int32x1    312 MB/s
>raid6: int32x2    348 MB/s
>raid6: int32x4    281 MB/s
>raid6: int32x8    268 MB/s
>raid6: mmxx1      884 MB/s
>raid6: mmxx2     1094 MB/s
>raid6: sse1x1     793 MB/s
>raid6: sse1x2    1106 MB/s
>raid6: using algorithm sse1x2 (1106 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>md: multipath personality registered for level -4
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>Using IPI Shortcut mode
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>md: Autodetecting RAID arrays.
>md: Scanned 0 and added 0 devices.
>md: autorun ...
>md: ... autorun DONE.
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[2000000004002f6d]
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem) readonly.
>Freeing unused kernel memory: 340k freed
>scsi 3:0:0:0: Direct-Access              USB Flash Memory 1.04 PQ: 0 ANSI: 0 CCS
>sd 3:0:0:0: [sda] 499712 512-byte hardware sectors (256 MB)
>sd 3:0:0:0: [sda] Write Protect is off
>sd 3:0:0:0: [sda] Mode Sense: 23 00 00 00
>sd 3:0:0:0: [sda] Assuming drive cache: write through
>sd 3:0:0:0: [sda] 499712 512-byte hardware sectors (256 MB)
>sd 3:0:0:0: [sda] Write Protect is off
>sd 3:0:0:0: [sda] Mode Sense: 23 00 00 00
>sd 3:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1
>sd 3:0:0:0: [sda] Attached SCSI removable disk
>usb-storage: device scan complete
>Linux agpgart interface v0.102
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>8139too Fast Ethernet driver 0.9.28
>PCI: setting IRQ 5 as level-triggered
>PCI: Found IRQ 5 for device 0000:00:08.0
>eth0: RealTek RTL8139 at 0xac00, 00:06:7b:08:e6:bb, IRQ 5
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>Linux Tulip driver version 1.1.15 (Feb 27, 2007)
>PCI: setting IRQ 10 as level-triggered
>PCI: Found IRQ 10 for device 0000:00:09.0
>tulip0:  MII transceiver #1 config 1000 status 7809 advertising 01e1.
>eth1: Davicom DM9102/DM9102A rev 64 at MMIO 0xeb000000, 00:60:6e:75:b7:c2, IRQ 10.
>agpgart: Detected VIA Apollo Pro 133 chipset
>agpgart: AGP aperture is 128M @ 0xe0000000
>parport_pc: VIA 686A/8231 detected
>parport_pc: probing current configuration
>parport_pc: Current parallel port base: 0x378
>parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
>parport_pc: VIA parallel port: io=0x378, irq=7
>i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
>gameport: EMU10K1 is pci0000:00:0a.1/gameport0, io 0xb800, speed 1269kHz
>PCI: Found IRQ 9 for device 0000:00:0a.0
>PCI: Sharing IRQ 9 with 0000:00:0c.0
>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
>udev: renamed network interface eth1 to eth0
>udev: renamed network interface eth0_rename to eth1
>sd 3:0:0:0: Attached scsi generic sg0 type 0
>Adding 4883752k swap on /dev/hdb2.  Priority:-1 extents:1 across:4883752k
>fuse init (API version 7.9)
>EXT3 FS on hdb1, internal journal
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>0000:00:09.0: tulip_stop_rxtx() failed (CSR5 0xfc040002 CSR6 0x20e0000)
>0000:00:09.0: tulip_stop_rxtx() failed (CSR5 0xfc040002 CSR6 0x20e0000)
>0000:00:09.0: tulip_stop_rxtx() failed (CSR5 0xfc040002 CSR6 0x20e0000)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>usb 1-2: USB disconnect, address 2
>atkbd.c: Unknown key pressed (translated set 2, code 0xbc on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e03c <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xbc on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e03c <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xbb on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e03b <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xbb on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e03b <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xbb on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e03b <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xbb on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e03b <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xbc on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e03c <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xbc on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e03c <keycode>' to make it known.
>usb 1-2: new full speed USB device using uhci_hcd and address 3
>usb 1-2: configuration #1 chosen from 1 choice
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>sysfs: duplicate filename 'usb_storage' can not be created
>WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
>Pid: 2829, comm: modprobe Not tainted 2.6.24.4 #2
> [<c019e7be>] sysfs_add_one+0x9e/0xe0
> [<c019ec98>] create_dir+0x48/0x90
> [<c019ed09>] sysfs_create_dir+0x29/0x50
> [<c036debf>] kobject_get+0xf/0x20
> [<c036e34b>] kobject_add+0x7b/0x1a0
> [<c0137201>] lookup_symbol+0x21/0x40
> [<c01377f4>] mod_sysfs_setup+0x24/0xb0
> [<c013892b>] sys_init_module+0xefb/0x14e0
> [<c0161c50>] do_sync_read+0x0/0x120
> [<c01625f3>] vfs_read+0xb3/0x140
> [<c01040a2>] syscall_call+0x7/0xb
> [<c06a0000>] rpc_run_timer+0x0/0x60
> =======================
>kobject_add failed for usb_storage with -EEXIST, don't try to register things with the same name in the same directory.
>Pid: 2829, comm: modprobe Not tainted 2.6.24.4 #2
> [<c036e3d1>] kobject_add+0x101/0x1a0
> [<c01377f4>] mod_sysfs_setup+0x24/0xb0
> [<c013892b>] sys_init_module+0xefb/0x14e0
> [<c0161c50>] do_sync_read+0x0/0x120
> [<c01625f3>] vfs_read+0xb3/0x140
> [<c01040a2>] syscall_call+0x7/0xb
> [<c06a0000>] rpc_run_timer+0x0/0x60
> =======================
>scsi 4:0:0:0: Direct-Access              USB Flash Memory 1.04 PQ: 0 ANSI: 0 CCS
>sd 4:0:0:0: [sda] 499712 512-byte hardware sectors (256 MB)
>sd 4:0:0:0: [sda] Write Protect is off
>sd 4:0:0:0: [sda] Mode Sense: 23 00 00 00
>sd 4:0:0:0: [sda] Assuming drive cache: write through
>sd 4:0:0:0: [sda] 499712 512-byte hardware sectors (256 MB)
>sd 4:0:0:0: [sda] Write Protect is off
>sd 4:0:0:0: [sda] Mode Sense: 23 00 00 00
>sd 4:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1
>sd 4:0:0:0: [sda] Attached SCSI removable disk
>sd 4:0:0:0: Attached scsi generic sg0 type 0
>usb-storage: device scan complete
>usb 1-2: USB disconnect, address 3
>usb 1-2: new full speed USB device using uhci_hcd and address 4
>usb 1-2: configuration #1 chosen from 1 choice
>scsi5 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>sysfs: duplicate filename 'usb_storage' can not be created
>WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
>Pid: 2881, comm: modprobe Not tainted 2.6.24.4 #2
> [<c019e7be>] sysfs_add_one+0x9e/0xe0
> [<c019ec98>] create_dir+0x48/0x90
> [<c019ed09>] sysfs_create_dir+0x29/0x50
> [<c036debf>] kobject_get+0xf/0x20
> [<c036e34b>] kobject_add+0x7b/0x1a0
> [<c0137201>] lookup_symbol+0x21/0x40
> [<c01377f4>] mod_sysfs_setup+0x24/0xb0
> [<c013892b>] sys_init_module+0xefb/0x14e0
> [<c0161c50>] do_sync_read+0x0/0x120
> [<c01625f3>] vfs_read+0xb3/0x140
> [<c01040a2>] syscall_call+0x7/0xb
> [<c06a0000>] rpc_run_timer+0x0/0x60
> =======================
>kobject_add failed for usb_storage with -EEXIST, don't try to register things with the same name in the same directory.
>Pid: 2881, comm: modprobe Not tainted 2.6.24.4 #2
> [<c036e3d1>] kobject_add+0x101/0x1a0
> [<c01377f4>] mod_sysfs_setup+0x24/0xb0
> [<c013892b>] sys_init_module+0xefb/0x14e0
> [<c0161c50>] do_sync_read+0x0/0x120
> [<c01625f3>] vfs_read+0xb3/0x140
> [<c01040a2>] syscall_call+0x7/0xb
> [<c06a0000>] rpc_run_timer+0x0/0x60
> =======================
>scsi 5:0:0:0: Direct-Access              USB Flash Memory 1.04 PQ: 0 ANSI: 0 CCS
>sd 5:0:0:0: [sda] 499712 512-byte hardware sectors (256 MB)
>sd 5:0:0:0: [sda] Write Protect is off
>sd 5:0:0:0: [sda] Mode Sense: 23 00 00 00
>sd 5:0:0:0: [sda] Assuming drive cache: write through
>sd 5:0:0:0: [sda] 499712 512-byte hardware sectors (256 MB)
>sd 5:0:0:0: [sda] Write Protect is off
>sd 5:0:0:0: [sda] Mode Sense: 23 00 00 00
>sd 5:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1
>sd 5:0:0:0: [sda] Attached SCSI removable disk
>sd 5:0:0:0: Attached scsi generic sg0 type 0
>usb-storage: device scan complete

Actions: View

Attachments on bug 443226: 303220 | 303221 | 303222 | 303298 | 303299 | 303300