Attachment 303298 Details for Bug 443226 – dmesg - Fedora-9-Preview-i386-DVD

dmesg - Fedora-9-Preview-i386-DVD

dmesg (text/plain), 18.05 KB, created by Nicola Ricciarelli on 2008-04-22 12:36:14 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Nicola Ricciarelli

Created: 2008-04-22 12:36:14 UTC

Size: 18.05 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-0.234.rc9.git1.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080404 (Red Hat 4.3.0-6) (GCC) ) #1 SMP Tue Apr 15 18:37:15 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001c000000 (usable)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>448MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 114688) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   114688
>  HighMem    114688 ->   114688
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   114688
>On node 0 totalpages: 114688
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 864 pages used for memmap
>  Normal zone: 109728 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.2 present.
>Using APIC driver default
>ACPI Error (tbxfroot-0218): A valid RSDP was not found [20070126]
>Allocating PCI resources starting at 20000000 (gap: 1c000000:e3ff0000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113792
>Kernel command line: ro root=UUID=aef6bc45-74ae-445b-8973-351abc8f98cb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffb000 (0138d000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07b8000 soft=c0798000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 997.480 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 446860k/458752k available (2234k kernel code, 11196k reserved, 1119k data, 284k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xdc800000 - 0xff3fe000   ( 555 MB)
>    lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
>      .init : 0xc074e000 - 0xc0795000   ( 284 kB)
>      .data : 0xc062ea6d - 0xc0746800   (1119 kB)
>      .text : 0xc0400000 - 0xc062ea6d   (2234 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 1997.00 BogoMIPS (lpj=998500)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU serial number disabled.
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 20k freed
>ACPI: Core revision 20070126
>ACPI Exception (tbxface-0629): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20070126]
>ACPI: Unable to load the System Description Tables
>CPU0: Intel Pentium III (Coppermine) stepping 0a
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3712 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 13:01:49  Date: 04/22/08
>NET: Registered protocol family 16
>No dock devices found.
>PCI: PCI BIOS revision 2.10 entry at 0xfb1b0, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>pci 0000:00:07.4: quirk: region 4000-40ff claimed by vt82c586 ACPI
>pci 0000:00:07.4: quirk: region 6000-607f claimed by vt82c686 HW-mon
>pci 0000:00:07.4: quirk: region 5000-500f claimed by vt82c686 SMB
>PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: 0xe8000000-0xe9ffffff
>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2630k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>audit: initializing netlink socket (disabled)
>type=2000 audit(1208869308.649:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>pci 0000:00:07.0: Disabling VIA external APIC routing
>pci 0000:01:00.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected VIA Apollo Pro 133 chipset
>agpgart: AGP aperture is 128M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 4:978:28
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 908k
>logips2pp: Detected unknown logitech mouse model 90
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>PCI: setting IRQ 11 as level-triggered
>PCI: Found IRQ 11 for device 0000:00:07.2
>PCI: Sharing IRQ 11 with 0000:00:0b.0
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 11, io base 0x0000a400
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 uhci_hcd
>usb usb1: SerialNumber: 0000:00:07.2
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input2
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>usb 1-2: configuration #1 chosen from 1 choice
>usb 1-2: New USB device found, idVendor=0930, idProduct=6532
>usb 1-2: New USB device strings: Mfr=0, Product=2, SerialNumber=3
>usb 1-2: Product: USB Flash Memory
>usb 1-2: SerialNumber: 0AF0F75000718B6E
>pata_via 0000:00:07.1: version 0.3.3
>scsi0 : pata_via
>scsi1 : pata_via
>ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xa000 irq 14
>ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xa008 irq 15
>ata1.00: ATA-7: Maxtor 6L120P0, BAH41G10, max UDMA/133
>ata1.00: 240121728 sectors, multi 16: LBA 
>ata1.01: ATA-7: MAXTOR STM3160212A, 3.AAJ, max UDMA/100
>ata1.01: 312581808 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/66
>ata1.01: configured for UDMA/66
>ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0L23, max UDMA/33
>ata2.01: ATAPI: HL-DT-STDVD-RAM GSA-H58N, 1.00, max UDMA/66
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/66
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6L120P0   BAH4 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: Direct-Access     ATA      MAXTOR STM316021 3.AA PQ: 0 ANSI: 5
>sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4
>sd 0:0:1:0: [sdb] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8163B 0L23 PQ: 0 ANSI: 5
>scsi 1:0:1:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H58N 1.00 PQ: 0 ANSI: 5
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1208869322.074:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux:8192 avtab hash slots allocated. Num of rules:172102
>SELinux:8192 avtab hash slots allocated. Num of rules:172102
>security:  8 users, 12 roles, 2300 types, 115 bools, 1 sens, 1024 cats
>security:  72 classes, 172102 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sdb1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1208869325.464:3): policy loaded auid=4294967295 ses=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>scsi 1:0:0:0: Attached scsi generic sg2 type 5
>scsi 1:0:1:0: Attached scsi generic sg3 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>sr 1:0:1:0: Attached scsi CD-ROM sr1
>parport_pc: VIA 686A/8231 detected
>parport_pc: probing current configuration
>parport_pc: Current parallel port base: 0x378
>parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
>parport_pc: VIA parallel port: io=0x378, irq=7
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>8139cp 0000:00:08.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>8139cp 0000:00:08.0: Try the "8139too" driver instead.
>dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
>PCI: setting IRQ 10 as level-triggered
>PCI: Found IRQ 10 for device 0000:00:09.0
>8139too Fast Ethernet driver 0.9.28
>eth0: Davicom DM9102 at pci0000:00:09.0, 00:60:6e:75:b7:c2, irq 10.
>PCI: setting IRQ 5 as level-triggered
>PCI: Found IRQ 5 for device 0000:00:08.0
>eth1: RealTek RTL8139 at 0xdc894000, 00:06:7b:08:e6:bb, IRQ 5
>eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
>Linux Tulip driver version 1.1.15 (Feb 27, 2007)
>PCI: Found IRQ 11 for device 0000:00:0b.0
>PCI: Sharing IRQ 11 with 0000:00:07.2
>input: PC Speaker as /devices/platform/pcspkr/input/input3
>ppdev: user-space parallel port driver
>udev: renamed network interface eth1 to eth0
>udev: renamed network interface eth0_rename to eth1
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access              USB Flash Memory 1.04 PQ: 0 ANSI: 0 CCS
>sd 2:0:0:0: [sdc] 499712 512-byte hardware sectors (256 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
>sd 2:0:0:0: [sdc] Assuming drive cache: write through
>sd 2:0:0:0: [sdc] 499712 512-byte hardware sectors (256 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
>sd 2:0:0:0: [sdc] Assuming drive cache: write through
> sdc: sdc1
>sd 2:0:0:0: [sdc] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg4 type 0
>scsi3 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
>        <Adaptec 2940 Ultra SCSI adapter>
>        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
>
>gameport: EMU10K1 is pci0000:00:0a.1/gameport0, io 0xb800, speed 1269kHz
>PCI: setting IRQ 9 as level-triggered
>PCI: Found IRQ 9 for device 0000:00:0a.0
>PCI: Sharing IRQ 9 with 0000:00:0c.0
>ALSA sound/pci/emu10k1/emu10k1_main.c:1747: vendor=0x1102, device=0x2, subsystem_vendor_id=0x80401102, subsystem_id=0x8040
>ALSA sound/pci/emu10k1/emu10k1_main.c:1772: Sound card name=SBLive! Platinum [CT4760P]
>PCI: Found IRQ 9 for device 0000:00:0c.0
>PCI: Sharing IRQ 9 with 0000:00:0a.0
>firewire_ohci: Added fw-ohci device 0000:00:0c.0, OHCI version 1.0
>firewire_core: created device fw0: GUID 2000000004002f6d, S400
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on sdb1, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 4883752k swap on /dev/sdb2.  Priority:-1 extents:1 across:4883752k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (7168 buckets, 28672 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>eth0: link up, 10Mbps, half-duplex, lpa 0x0000
>eth0: no IPv6 routers present
>SELinux: initialized (dev sda1, type vfat), uses genfs_contexts

Actions: View

Attachments on bug 443226: 303220 | 303221 | 303222 | 303298 | 303299 | 303300