Attachment 303371 Details for Bug 443591 – dmesg after two hangs

dmesg after two hangs

dmesg.txt (text/plain), 26.41 KB, created by Juhani Jaakola on 2008-04-22 20:13:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Juhani Jaakola

Created: 2008-04-22 20:13:54 UTC

Size: 26.41 KB

patch

obsolete

>Linux version 2.6.23.15-80.fc7 (mockbuild@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #1 SMP Sun Feb 10 17:29:10 EST 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000037f10000 (usable)
> BIOS-e820: 0000000037f10000 - 0000000037f1b000 (ACPI data)
> BIOS-e820: 0000000037f1b000 - 0000000037f80000 (ACPI NVS)
> BIOS-e820: 0000000037f80000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>895MB LOWMEM available.
>found SMP MP-table at 000f81c0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 229136) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229136
>  HighMem    229136 ->   229136
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   229136
>On node 0 totalpages: 229136
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1758 pages used for memmap
>  Normal zone: 223282 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F8350, 0014 (r0 PTLTD )
>ACPI: RSDT 37F14F82, 0038 (r1 PTLTD    RSDT    6040000  LTP        0)
>ACPI: FACP 37F1ADCD, 0074 (r1 NVIDIA MCP51M    6040000 PTL_    F4240)
>ACPI: DSDT 37F14FBA, 5E13 (r1 NVIDIA   MCP51M  6040000 MSFT  100000E)
>ACPI: FACS 37F1BFC0, 0040
>ACPI: MCFG 37F1AE41, 003C (r1 PTLTD    MCFG    6040000  LTP        0)
>ACPI: APIC 37F1AE7D, 0046 (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: BOOT 37F1AEC3, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>ACPI: SSDT 37F1AEEB, 0115 (r1 PTLTD  POWERNOW  6040000  LTP        1)
>ACPI: DMI detected: Acer
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:12 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
>swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
>swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 227346
>Kernel command line: ro root=LABEL=/
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a6000 soft=c0786000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2009.268 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 900592k/916544k available (2178k kernel code, 15260k reserved, 1114k data, 280k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf7f10000   ( 895 MB)
>      .init : 0xc073d000 - 0xc0783000   ( 280 kB)
>      .data : 0xc062098d - 0xc0737544   (1114 kB)
>      .text : 0xc0400000 - 0xc062098d   (2178 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 4020.94 BogoMIPS (lpj=2010472)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001d 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: After all inits, caps: 078bf3ff ebd3fbff 00000000 00000410 00002001 00000000 0000001d 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: AMD Turion(tm) 64 Mobile Technology MK-36 stepping 02
>Total of 1 processors activated (4020.94 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 16:27:50  Date: 04/18/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS BUG #81[00000000] found
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:10.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LSMU] (IRQs 16 17 18 19 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *7
>ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *0
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>pnp: 00:00: iomem range 0xffc00000-0xffffffff could not be reserved
>pnp: 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
>pnp: 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
>pnp: 00:00: iomem range 0x0-0x0 could not be reserved
>pnp: 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:03: ioport range 0x1000-0x107f has been reserved
>pnp: 00:03: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:03: ioport range 0x1400-0x147f has been reserved
>pnp: 00:03: ioport range 0x1480-0x14ff has been reserved
>pnp: 00:03: ioport range 0x1800-0x187f has been reserved
>pnp: 00:03: ioport range 0x1880-0x18ff has been reserved
>pnp: 00:03: ioport range 0x2000-0x203f has been reserved
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: 4000-4fff
>  MEM window: c4000000-c40fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bus 5, cardbus bridge: 0000:04:06.0
>  IO window: 00005000-000050ff
>  IO window: 00005400-000054ff
>  PREFETCH window: 50000000-53ffffff
>  MEM window: 58000000-5bffffff
>PCI: Bridge: 0000:00:10.0
>  IO window: 5000-5fff
>  MEM window: c3000000-c30fffff
>  PREFETCH window: 50000000-53ffffff
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:04:06.0[A] -> Link [LNK4] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2821k freed
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1208536069.432:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 4AF11E66D9C7B2BE
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:05.0
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126]
>Marking TSC unstable due to: possible TSC halt in C2.
>Time: acpi_pm clocksource has been installed.
>Switched to high resolution mode on CPU 0
>ACPI: Thermal Zone [TZS0] (51 C)
>ACPI: Thermal Zone [TZS1] (54 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:04:06.0 [1025:0112]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:04:06.0, mfunc 0x013a1b22, devctl 0x64
>Yenta: ISA IRQ mask 0x04f8, PCI irq 11
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#04) from #05 to #08
>pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>cs: IO port probe 0x5000-0x5fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xc3000000 - 0xc30fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MK-36 processors (1 cpu cores) (version 2.00.00)
>powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x10
>powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x12
>powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0x14
>powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x18
>Using IPI No-Shortcut mode
>  Magic number: 4:961:489
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 846k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 23 (level, high) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0b.0: irq 16, io mem 0xc0004000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 22 (level, high) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:0b.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:0b.1
>ehci_hcd 0000:00:0b.1: irq 17, io mem 0xc0005000
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
>SCSI subsystem initialized
>libata version 2.21 loaded.
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>pata_amd 0000:00:0d.0: version 0.3.9
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>scsi0 : pata_amd
>scsi1 : pata_amd
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00013080 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00013088 irq 15
>ata1.00: ATA-7: Hitachi HTS541612J9AT00, SBDOA70H, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, SC04, max UDMA/33
>usb 2-6: new high speed USB device using ehci_hcd and address 3
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 <<6>usb 2-6: configuration #1 chosen from 1 choice
> sda5 sda6 sda7 sda8 sda9 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-L632D SC04 PQ: 0 ANSI: 5
>usb 2-8: new high speed USB device using ehci_hcd and address 4
>usb 2-8: configuration #1 chosen from 1 choice
>usb 1-2: new low speed USB device using ohci_hcd and address 2
>usb 1-2: configuration #1 chosen from 1 choice
>input: HID 04b3:310b as /class/input/input3
>input: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:0b.0-2
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1208536077.609:2): selinux=0 auid=4294967295
>ACPI: WMI-Acer: Mapper loaded
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 21 (level, high) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:14.0 to 64
>forcedeth: using HIGHDMA
>acer_acpi: Acer Laptop ACPI Extras version 0.11.1
>acer_acpi: Detected Acer AMW0 version 2 interface
>Registered led device: acer_acpi:mail
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>DVB: registering new adapter (TerraTec/qanu USB2.0 Highspeed DVB-T Receiver)
>input: TerraTec/qanu USB2.0 Highspeed DVB-T Receiver remote control as /class/input/input4
>usbcore: registered new interface driver cinergyT2
>eth0: forcedeth.c: subsystem: 01025:0112 bound to 0000:00:14.0
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input6
>ACPI: Lid Switch [LID0]
>input: Sleep Button (CM) as /class/input/input7
>ACPI: Sleep Button (CM) [SLPB]
>input: Power Button (CM) as /class/input/input8
>ACPI: Power Button (CM) [PWRB]
>input: PC Speaker as /class/input/input9
>input: Video Bus as /class/input/input10
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /class/input/input11
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>ath_hal: module license 'Proprietary' taints kernel.
>ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
>ACPI: PCI Interrupt 0000:04:06.2[A] -> Link [LNK4] -> GSI 11 (level, low) -> IRQ 11
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
>wlan: 0.8.4.2 (0.9.3.3)
>ath_pci: 0.9.4.5 (0.9.3.3)
>ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:04:05.0[A] -> Link [LNK2] -> GSI 20 (level, high) -> IRQ 19
>ACPI: AC Adapter [ADP1] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ath_rate_sample: 1.2 (0.9.3.3)
>wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>wifi0: H/W encryption support: WEP AES AES_CCM TKIP
>wifi0: mac 7.8 phy 4.5 radio 5.6
>wifi0: Use hw queue 1 for WME_AC_BE traffic
>wifi0: Use hw queue 0 for WME_AC_BK traffic
>wifi0: Use hw queue 2 for WME_AC_VI traffic
>wifi0: Use hw queue 3 for WME_AC_VO traffic
>wifi0: Use hw queue 8 for CAB traffic
>wifi0: Use hw queue 9 for beacons
>ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LK3E] -> GSI 19 (level, high) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>wifi0: Atheros 5212: mem=0xc3000000, irq=19
>NVRM: loading NVIDIA UNIX x86 Kernel Module  169.09  Fri Jan 11 14:38:28 PST 2008
>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 18 (level, high) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:10.1 to 64
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda6, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda9, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1052216k swap on /dev/sda8.  Priority:-1 extents:1 across:1052216k
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Clocksource tsc unstable (delta = -161974706 ns)
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>fuse init (API version 7.8)
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>ath0: no IPv6 routers present
>ata2.00: 16 bytes trailing data
>ata2.00: 16 bytes trailing data
>cdrom: This disc doesn't have any tracks I recognize!
>ata2.00: 16 bytes trailing data
>ata2.00: 16 bytes trailing data
>ata2.00: 16 bytes trailing data
>cdrom: sr0: mrw address space DMA selected
>UDF-fs: Partition marked readonly; forcing readonly mount
>UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'X-Men 2', timestamp 2008/04/19 10:33 (10b4)
>ata2.00: 16 bytes trailing data
>cdrom: This disc doesn't have any tracks I recognize!
>ata2.00: 16 bytes trailing data
>cdrom: This disc doesn't have any tracks I recognize!
>ata2.00: 16 bytes trailing data
>ata2.00: 16 bytes trailing data
>ata2.00: 16 bytes trailing data
>cdrom: sr0: mrw address space DMA selected
>UDF-fs: Partition marked readonly; forcing readonly mount
>UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume '7 miljonÃ¤Ã¤riÃ¤', timestamp 2008/04/19 11:05 (10b4)
>usb 2-4: new high speed USB device using ehci_hcd and address 5
>usb 2-4: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 5
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
>sd 2:0:0:0: [sdb] 15638528 512-byte hardware sectors (8007 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
>sd 2:0:0:0: [sdb] 15638528 512-byte hardware sectors (8007 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 2:0:0:0: [sdb] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>usb 2-4: reset high speed USB device using ehci_hcd and address 5
>usb 2-4: USB disconnect, address 5
>ata2.00: 16 bytes trailing data
>cdrom: This disc doesn't have any tracks I recognize!
>ata2.00: 16 bytes trailing data
>ata2.00: 16 bytes trailing data
>ata2.00: 16 bytes trailing data
>cdrom: sr0: mrw address space DMA selected
>UDF-fs: Partition marked readonly; forcing readonly mount
>UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'Poliisipiiri B13', timestamp 2008/04/20 16:26 (10b4)
>atkbd.c: Unknown key pressed (translated set 2, code 0xf1 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e071 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf1 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e071 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf1 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e071 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf1 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e071 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf1 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e071 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf1 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e071 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd5 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xd5 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
>ADDRCONF(NETDEV_UP): ath0: link is not ready
>ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
>ath0: no IPv6 routers present
>cdrom: This disc doesn't have any tracks I recognize!
>ata2.00: 16 bytes trailing data
>ata2.00: 16 bytes trailing data
>ata2.00: 16 bytes trailing data
>ata2.00: 16 bytes trailing data
>cdrom: sr0: mrw address space DMA selected
>UDF-fs: Partition marked readonly; forcing readonly mount
>UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'Zegen', timestamp 2008/04/21 11:25 (10b4)
>ata2.00: 16 bytes trailing data
>cdrom: This disc doesn't have any tracks I recognize!
>ata2.00: 16 bytes trailing data
>ata2.00: 16 bytes trailing data
>ata2.00: 16 bytes trailing data
>cdrom: sr0: mrw address space DMA selected
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>ADDRCONF(NETDEV_UP): ath0: link is not ready
>ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
>ath0: no IPv6 routers present
>PPP generic driver version 2.4.2
>usb 1-4: new full speed USB device using ohci_hcd and address 3
>usb 1-4: configuration #1 chosen from 1 choice
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>PPP Deflate Compression module registered
>ADDRCONF(NETDEV_UP): ath0: link is not ready
>ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
>ath0: no IPv6 routers present

Actions: View

Attachments on bug 443591: 303371