Attachment 303438 Details for Bug 443590 – Output of dmesg command

Output of dmesg command

dmesg.txt (text/plain), 29.91 KB, created by Simone Marchioni on 2008-04-23 07:06:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Simone Marchioni

Created: 2008-04-23 07:06:34 UTC

Size: 29.91 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-0.234.rc9.git1.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080404 (Red Hat 4.3.0-6) (GCC) ) #1 SMP Tue Apr 15 18:37:15 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fee0000 (usable)
> BIOS-e820: 000000001fee0000 - 000000001feec000 (ACPI data)
> BIOS-e820: 000000001feec000 - 000000001ff00000 (ACPI NVS)
> BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>510MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>Scan SMP from c009f800 for 1024 bytes.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 130784) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   130784
>  HighMem    130784 ->   130784
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   130784
>On node 0 totalpages: 130784
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 989 pages used for memmap
>  Normal zone: 125699 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F6020, 0014 (r0 ACER  )
>ACPI: RSDT 1FEE52ED, 0030 (r1 ACER   TM8000   20020131  LTP        0)
>ACPI: FACP 1FEEBF2C, 0074 (r1 ACER   TM8000   20020131 PTL        50)
>ACPI: DSDT 1FEE531D, 6C0F (r1 ACER   TM8000   20020131 MSFT  100000E)
>ACPI: FACS 1FEFCFC0, 0040
>ACPI: HPET 1FEEBFA0, 0038 (r1 ACER   TM8000   20020131 PTL         0)
>ACPI: BOOT 1FEEBFD8, 0028 (r1 ACER   TM8000   20020131  LTP        1)
>ACPI: DMI detected: Acer
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: HPET id: 0x8086a201 base: 0x0 is invalid
>Allocating PCI resources starting at 30000000 (gap: 20000000:dec10000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129763
>Kernel command line: initrd=initrd0.img root=CDLABEL=Fedora-9-PR-i686-20080416 rootfstype=iso9660 ro quiet liveimg rhgb  BOOT_IMAGE=vmlinuz0 
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffb000 (0140d000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07b8000 soft=c0798000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1594.854 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 509068k/523136k available (2234k kernel code, 13484k reserved, 1119k data, 284k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff3fe000   ( 491 MB)
>    lowmem  : 0xc0000000 - 0xdfee0000   ( 510 MB)
>      .init : 0xc074e000 - 0xc0795000   ( 284 kB)
>      .data : 0xc062ea6d - 0xc0746800   (1119 kB)
>      .text : 0xc0400000 - 0xc062ea6d   (2234 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3191.03 BogoMIPS (lpj=1595517)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 20k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0440)
>CPU0: Intel(R) Pentium(R) M processor 1600MHz stepping 05
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3712 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  6:53:14  Date: 04/23/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd732, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *6)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *6)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
>ACPI: Power Resource [PFN0] (off)
>ACPI: Power Resource [PFN1] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>system 00:04: ioport range 0x600-0x60f has been reserved
>system 00:04: ioport range 0x700-0x70f has been reserved
>system 00:04: ioport range 0x800-0x80f has been reserved
>system 00:04: ioport range 0x1000-0x107f has been reserved
>system 00:04: ioport range 0x1180-0x11bf has been reserved
>system 00:04: ioport range 0x1c0-0x1cf has been reserved
>system 00:04: ioport range 0xfe00-0xfe00 has been reserved
>system 00:04: ioport range 0x4d0-0x4d1 has been reserved
>system 00:04: ioport range 0x610-0x61f has been reserved
>system 00:04: iomem range 0xfec10000-0xfec1ffff could not be reserved
>system 00:04: iomem range 0xff800000-0xffbfffff could not be reserved
>system 00:04: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:04: iomem range 0x0-0x9ffff could not be reserved
>system 00:04: iomem range 0xe0000-0xfffff could not be reserved
>system 00:04: iomem range 0xdf800-0xdffff has been reserved
>system 00:04: iomem range 0x0-0x0 could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 3000-3fff
>  MEM window: 0xd0100000-0xd01fffff
>  PREFETCH window: 0x00000000d8000000-0x00000000dfffffff
>PCI: Bus 3, cardbus bridge: 0000:02:06.0
>  IO window: 0x00004000-0x000040ff
>  IO window: 0x00004400-0x000044ff
>  PREFETCH window: 0x30000000-0x33ffffff
>  MEM window: 0x40000000-0x43ffffff
>PCI: Bus 7, cardbus bridge: 0000:02:06.1
>  IO window: 0x00004800-0x000048ff
>  IO window: 0x00004c00-0x00004cff
>  PREFETCH window: 0x34000000-0x37ffffff
>  MEM window: 0x44000000-0x47ffffff
>PCI: Bus 11, cardbus bridge: 0000:02:06.3
>  IO window: 0x00001400-0x000014ff
>  IO window: 0x00002800-0x000028ff
>  PREFETCH window: 0x38000000-0x3bffffff
>  MEM window: 0x48000000-0x4bffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 4000-4fff
>  MEM window: 0xd0200000-0xd07fffff
>  PREFETCH window: 0x0000000030000000-0x000000003bffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 6
>PCI: setting IRQ 6 as level-triggered
>ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
>ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
>PCI: Enabling device 0000:02:06.3 (0080 -> 0083)
>ACPI: PCI Interrupt 0000:02:06.3[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
>PCI: Setting latency timer of device 0000:02:06.3 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 4404k freed
>ACPI: EC: missing OBF confirmation, don't expect it any longer.
>Simple Boot Flag at 0x37 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1208933594.700:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [FAN0] to D3
>ACPI: PNP0C0B:00 is registered as cooling_device0
>ACPI: Fan [FAN0] (off)
>ACPI: Transitioning device [FAN1] to D3
>ACPI: PNP0C0B:01 is registered as cooling_device1
>ACPI: Fan [FAN1] (off)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device2
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (32 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 855GM Chipset.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>Yenta: CardBus bridge found at 0000:02:06.0 [1025:0051]
>Yenta O2: res at 0x94/0xD4: ea/00
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x08b8, PCI irq 6
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
>cs: IO port probe 0x4000-0x4fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd07fffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x3bffffff
>Yenta: CardBus bridge found at 0000:02:06.1 [1025:0051]
>Yenta: ISA IRQ mask 0x08b8, PCI irq 6
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
>cs: IO port probe 0x4000-0x4fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd07fffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x3bffffff
>Yenta: CardBus bridge found at 0000:02:06.3 [1025:0051]
>Yenta: ISA IRQ mask 0x08b8, PCI irq 6
>Socket status: 30000410
>Yenta: Raising subordinate bus# of parent bus (#02) from #0a to #0e
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
>cs: IO port probe 0x4000-0x4fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd07fffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x3bffffff
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 4:688:873
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 908k
>SCSI subsystem initialized
>Driver 'sr' needs updating - please use bus_type methods
>loop: module loaded
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 6, io base 0x00001800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000
>pccard: PCMCIA card inserted into slot 2
>cs: memory probe 0xd0200000-0xd07fffff: excluding 0xd0200000-0xd025ffff
>pcmcia: registering new device pcmcia2.0
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>libata version 3.00 loaded.
>firewire_ohci: Added fw-ohci device 0000:02:07.0, OHCI version 1.10
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 6, io base 0x00001820
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>Marking TSC unstable due to: TSC halts in idle.
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 6, io base 0x00001840
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>ata_piix 0000:00:1f.1: version 2.12
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2
>ata1.00: ATA-6: WDC WD800UE-00HCT0, 09.07D09, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA 
>usb 2-6: new high speed USB device using ehci_hcd and address 3
>ata1.00: configured for UDMA/100
>firewire_core: created device fw0: GUID 00c09f000019bc42, S400
>usb 2-6: configuration #1 chosen from 1 choice
>hub 2-6:1.0: USB hub found
>hub 2-6:1.0: 4 ports detected
>usb 2-6: New USB device found, idVendor=04b4, idProduct=6560
>usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>ata2.01: NODEV after polling detection
>usb 3-2: new low speed USB device using uhci_hcd and address 2
>ata2.00: failed to IDENTIFY (I/O error, err_mask=0x40)
>ata2: failed to recover some devices, retrying in 5 secs
>usb 3-2: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3
>input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2
>usb 3-2: New USB device found, idVendor=046d, idProduct=c01b
>usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-2: Product: USB-PS/2 Optical Mouse
>usb 3-2: Manufacturer: Logitech
>ata2.01: NODEV after polling detection
>ata2.00: ATAPI: MATSHITADVD-RAM UJ-820S, 1.00, max UDMA/33
>ata2.00: configured for UDMA/33
>ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
>ata2: ACPI event
>ata2: soft resetting link
>ata2.01: NODEV after polling detection
>ata2.00: configured for UDMA/33
>ata2: EH complete
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD800UE-00HC 09.0 PQ: 0 ANSI: 5
>scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-820S  1.00 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>Driver 'sd' needs updating - please use bus_type methods
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ISO 9660 Extensions: Microsoft Joliet Level 3
>Unable to load NLS charset utf8
>Unable to load NLS charset utf8
>ISO 9660 Extensions: RRIP_1991A
>squashfs: version 3.3 (2007/10/31) Phillip Lougher
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1208933648.514:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux:8192 avtab hash slots allocated. Num of rules:172102
>SELinux:8192 avtab hash slots allocated. Num of rules:172102
>security:  8 users, 12 roles, 2300 types, 115 bools, 1 sens, 1024 cats
>security:  72 classes, 172102 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=11905
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=10972
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=10971
>SELinux: initialized (dev loop2, type squashfs), not configured for labeling
>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1208933650.735:3): policy loaded auid=4294967295 ses=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>ACPI: WMI: Mapper loaded
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: AC Adapter [ACAD] (on-line)
>iTCO_vendor_support: vendor-support=0
>input: PC Speaker as /devices/platform/pcspkr/input/input7
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Battery Slot [BAT2] (battery absent)
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: Adding notify handler
>ACPI: Error installing bay notify handler
>ACPI: Bay [\_SB_.PCI0.IDE0.SECN.BAY1] Added
>ieee80211_crypt: registered algorithm 'NULL'
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
>acer-wmi: No or unsupported WMI interface, unable to load
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>tg3.c:v3.90 (April 12, 2008)
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6
>NET: Registered protocol family 23
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/device:03/input/input8
>eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:c0:9f:3e:fb:a1
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
>eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>intel_rng: FWH not detected
>ppdev: user-space parallel port driver
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x04e
>nsc-ircc, driver loaded (Dag Brattli)
>nsc_ircc_open(), can't get iobase of 0x2f8
>nsc-ircc, Found chip at base=0x04e
>nsc-ircc, driver loaded (Dag Brattli)
>nsc_ircc_open(), can't get iobase of 0x2f8
>nsc-ircc 00:0a: disabled
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
>ipw2200: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 50873 usecs
>intel8x0: clocking to 48000
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
>[drm] Initialized radeon 1.28.0 20060524 on minor 0
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>Adding 1048568k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:1048568k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Clocksource tsc unstable (delta = -78456248 ns)
>nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>ttyS1: LSR safety check engaged!
>mtrr: no MTRR for d8000000,4000000 found
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-1: New USB device found, idVendor=0ea0, idProduct=6803
>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-1: Product: Solid state disk
>usb 1-1: Manufacturer: USB
>usb 1-1: SerialNumber: 230760A43DA9318E
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     128MB    HardDrive        1.11 PQ: 0 ANSI: 2
>sd 2:0:0:0: [sdb] 258048 512-byte hardware sectors (132 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
>sd 2:0:0:0: [sdb] 258048 512-byte hardware sectors (132 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 2:0:0:0: [sdb] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts

Actions: View

Attachments on bug 443590: 303438