Attachment 303574 Details for Bug 443602 – dmesg output

dmesg output

dmesgout (text/plain), 31.08 KB, created by Adrin Jalali on 2008-04-24 04:51:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Adrin Jalali

Created: 2008-04-24 04:51:35 UTC

Size: 31.08 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-1.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080416 (Red Hat 4.3.0-7) (GCC) ) #1 SMP Thu Apr 17 01:47:10 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000005fed3400 (usable)
> BIOS-e820: 000000005fed3400 - 0000000060000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
> BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>638MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>Scan SMP from c009f000 for 1024 bytes.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 392915) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   392915
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   392915
>On node 0 totalpages: 392915
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 1277 pages used for memmap
>  HighMem zone: 162262 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000FC1D0, 0014 (r0 DELL  )
>ACPI: RSDT 5FED39CD, 0040 (r1 DELL    M07     27D7060D ASL        61)
>ACPI: FACP 5FED4800, 0074 (r1 DELL    M07     27D7060D ASL        61)
>ACPI: DSDT 5FED5400, 4766 (r1 INT430 SYSFexxx     1001 INTL 20050624)
>ACPI: FACS 5FEE3C00, 0040
>ACPI: HPET 5FED4F00, 0038 (r1 DELL    M07            1 ASL        61)
>ACPI: APIC 5FED5000, 0068 (r1 DELL    M07     27D7060D ASL        47)
>ACPI: MCFG 5FED4FC0, 003E (r16 DELL    M07     27D7060D ASL        61)
>ACPI: SLIC 5FED509C, 0176 (r1 DELL    M07     27D7060D ASL        61)
>ACPI: BOOT 5FED4BC0, 0028 (r1 DELL    M07     27D7060D ASL        61)
>ACPI: SSDT 5FED3A0D, 04DC (r1  PmRef    CpuPm     3000 INTL 20050624)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 70000000 (gap: 60000000:90000000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 389846
>Kernel command line: ro root=UUID=fc26ce1c-1948-4592-83cd-5cbb00596d7d rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07b8000 soft=c0798000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1995.038 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1550004k/1571660k available (2234k kernel code, 20376k reserved, 1119k data, 284k init, 654156k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074e000 - 0xc0795000   ( 284 kB)
>      .data : 0xc062ebed - 0xc0746800   (1119 kB)
>      .text : 0xc0400000 - 0xc062ebed   (2234 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 3993.66 BogoMIPS (lpj=1996831)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>Booting processor 1/1 ip 4000
>CPU 1 irqstacks, hard=c07b9000 soft=c0799000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.00 BogoMIPS (lpj=1995003)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>Total of 2 processors activated (7983.66 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 3956230596 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to: check_tsc_sync_source failed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3712 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  9:06:01  Date: 04/24/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4
>ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>Switched to high resolution mode on CPU 0
>system 00:00: iomem range 0x0-0x9fbff could not be reserved
>system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xcffff could not be reserved
>system 00:00: iomem range 0xe0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x5fed33ff could not be reserved
>system 00:00: iomem range 0x5fed3400-0x5fefffff could not be reserved
>system 00:00: iomem range 0x5ff00000-0x5fffffff could not be reserved
>system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
>system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved
>system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved
>system 00:00: iomem range 0xffa80000-0xffa83fff could not be reserved
>system 00:00: iomem range 0xf4000000-0xf4003fff could not be reserved
>system 00:00: iomem range 0xf4004000-0xf4004fff could not be reserved
>system 00:00: iomem range 0xf4005000-0xf4005fff could not be reserved
>system 00:00: iomem range 0xf4006000-0xf4006fff could not be reserved
>system 00:00: iomem range 0xf4008000-0xf400bfff could not be reserved
>system 00:00: iomem range 0xf0000000-0xf3ffffff could not be reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x1000-0x1005 has been reserved
>system 00:02: ioport range 0x1008-0x100f has been reserved
>system 00:03: ioport range 0xf400-0xf4fe has been reserved
>system 00:03: ioport range 0x1006-0x1007 has been reserved
>system 00:03: ioport range 0x100a-0x1059 could not be reserved
>system 00:03: ioport range 0x1060-0x107f has been reserved
>system 00:03: ioport range 0x1080-0x10bf has been reserved
>system 00:03: ioport range 0x10c0-0x10df has been reserved
>system 00:03: ioport range 0x1010-0x102f has been reserved
>system 00:03: ioport range 0x809-0x809 has been reserved
>system 00:08: ioport range 0xc80-0xcff could not be reserved
>system 00:08: ioport range 0x910-0x91f has been reserved
>system 00:08: ioport range 0x920-0x92f has been reserved
>system 00:08: ioport range 0xcb0-0xcbf has been reserved
>system 00:08: ioport range 0x930-0x97f has been reserved
>system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved
>Switched to high resolution mode on CPU 1
>PCI: Bridge: 0000:00:01.0
>  IO window: e000-efff
>  MEM window: 0xefd00000-0xefefffff
>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: 0xefc00000-0xefcfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: d000-dfff
>  MEM window: 0xefa00000-0xefbfffff
>  PREFETCH window: 0x00000000e0000000-0x00000000e01fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: 0xef900000-0xef9fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2667k freed
>Simple Boot Flag at 0x79 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1209027961.480:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>Allocate Port Service[0000:00:1c.3:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 5FED4134, 0244 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>ACPI: SSDT 5FED3EE9, 01C6 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 5FED4378, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
>ACPI: SSDT 5FED40AF, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THM] (47 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 4:807:121
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 908k
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-1.fc9.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-1.fc9.i686 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-1.fc9.i686 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x180b1, caps: 0xa04713/0x200000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-1.fc9.i686 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-1.fc9.i686 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.2: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
>usb 5-1: new low speed USB device using uhci_hcd and address 2
>ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC74P, max UDMA/100
>ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/100
>usb 5-1: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input3
>input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:1d.3-1
>usb 5-1: New USB device found, idVendor=045e, idProduct=007d
>usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-1: Product: Microsoft Notebook/Mobile Optical Mouse 2.0
>usb 5-1: Manufacturer: Microsoft
>ata2.00: ATAPI: Optiarc DVD+/-RW AD-5540A, 102C, max UDMA/33
>usb 5-2: new full speed USB device using uhci_hcd and address 3
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 < sda5<6>usb 5-2: configuration #1 chosen from 1 choice
>hub 5-2:1.0: USB hub found
>hub 5-2:1.0: 3 ports detected
> sda6 sda7 sda8 sda9 sda10 sda11 > sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            Optiarc  DVD+-RW AD-5540A 102C PQ: 0 ANSI: 5
>usb 5-2: New USB device found, idVendor=0a5c, idProduct=4500
>usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-2: Product: BCM2045B2
>usb 5-2: Manufacturer: Broadcom
>usb 5-2.1: new full speed USB device using uhci_hcd and address 4
>usb 5-2.1: configuration #1 chosen from 1 choice
>usb 5-2.1: New USB device found, idVendor=413c, idProduct=8126
>usb 5-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-2.1: Product: BCM2045
>usb 5-2.1: Manufacturer: Broadcom Corp
>usb 5-2.2: new full speed USB device using uhci_hcd and address 5
>usb 5-2.2: configuration #1 chosen from 1 choice
>input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2.2/5-2.2:1.0/input/input4
>input,hidraw1: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.3-2.2
>usb 5-2.2: New USB device found, idVendor=0a5c, idProduct=4502
>usb 5-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0
>usb 5-2.2: Manufacturer: Broadcom Corp
>usb 5-2.3: new full speed USB device using uhci_hcd and address 6
>usb 5-2.3: configuration #1 chosen from 1 choice
>input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2.3/5-2.3:1.0/input/input5
>input,hidraw2: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.3-2.3
>usb 5-2.3: New USB device found, idVendor=0a5c, idProduct=4503
>usb 5-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0
>usb 5-2.3: Manufacturer: Broadcom Corp
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:8192 avtab hash slots allocated. Num of rules:172102
>SELinux:8192 avtab hash slots allocated. Num of rules:172102
>security:  8 users, 12 roles, 2300 types, 115 bools, 1 sens, 1024 cats
>security:  72 classes, 172102 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda11, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1209027970.291:2): policy loaded auid=4294967295 ses=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:0b:00.0 to 64
>ssb: Sonics Silicon Backplane found on PCI device 0000:0b:00.0
>input: PC Speaker as /devices/platform/pcspkr/input/input6
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input9
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: WMI: Mapper loaded
>iTCO_vendor_support: vendor-support=0
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>usbcore: registered new interface driver hci_usb
>intel_rng: FWH not detected
>ACPI: device:25 is registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:21/device:22/input/input10
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: device:2a is registered as cooling_device3
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:27/input/input11
>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2c/input/input12
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
>firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI version 1.10
>sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19)
>ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 18
>mmc0: SDHCI at 0xef9fd500 irq 18 DMA
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
>b44.c:v2.0
>eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:19:b9:51:bf:bf
>b43-phy0: Broadcom 4311 WLAN found
>b43-phy0 debug: Found PHY: Analog 4, Type 2, Revision 8
>b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
>phy0: Selected rate control algorithm 'pid'
>firewire_core: created device fw0: GUID 344fc0002136b561, S400
>Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x3
>ALSA sound/pci/hda/hda_codec.c:2236: hda_codec: model 'dell-m25' is selected for config 1028:1bd (Dell Inspiron E1505n)
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 08 pin config 40c003fa
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 09 pin config 01441340
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0d pin config 0421121f
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0e pin config 90170310
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 0f pin config 408003fb
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 10 pin config 04a11020
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 11 pin config 401003fc
>ALSA sound/pci/hda/patch_sigmatel.c:1712: hda_codec: pin nid 12 pin config 403003fd
>ALSA sound/pci/hda/hda_codec.c:2857: autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2861:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2865:    hp_outs=1 (0xd/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2866:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:2874:    inputs: mic=0x10, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>[drm] Initialized radeon 1.28.0 20060524 on minor 0
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda11, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda7, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda10, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda10, type ext3), uses xattr
>fuse init (API version 7.9)
>SELinux: initialized (dev sda5, type fuseblk), uses genfs_contexts
>SELinux: initialized (dev sda2, type fuseblk), uses genfs_contexts
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>mtrr: no MTRR for d0000000,8000000 found
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>gnome-keyring-d[2667] general protection ip:d5f61f sp:bfe2b780 error:0 in libdbus-1.so.3.4.0[d54000+3f000]
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>b44: eth0: powering down PHY
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 443602: 303443 | 303574 | 305996