Attachment 303605 Details for Bug 427643 – output of compiz with white screen, lspci -v, and Xorg.0.log after starting compiz several times

output of compiz with white screen, lspci -v, and Xorg.0.log after starting compiz several times

compiz-white-screen-intel950.txt (text/plain), 31.21 KB, created by Andrew Farris on 2008-04-24 09:33:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andrew Farris

Created: 2008-04-24 09:33:28 UTC

Size: 31.21 KB

patch

obsolete

>00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
>	Subsystem: Intel Corporation Unknown device 7270
>	Flags: bus master, fast devsel, latency 0, IRQ 16
>	Memory at 90380000 (32-bit, non-prefetchable) [size=512K]
>	I/O ports at 20e0 [size=8]
>	Memory at 80000000 (32-bit, prefetchable) [size=256M]
>	Memory at 90400000 (32-bit, non-prefetchable) [size=256K]
>	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>	Capabilities: [d0] Power Management version 2
>	Kernel modules: intelfb, i915
>
>00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
>	Subsystem: Intel Corporation Unknown device 7270
>	Flags: bus master, fast devsel, latency 0
>	Memory at 90300000 (32-bit, non-prefetchable) [size=512K]
>	Capabilities: [d0] Power Management version 2
>
>
>The output of compiz --replace
>Failed to initialize TTM buffer manager.  Falling back to classic.
>failed to create drawable
>failed to create drawable
>failed to create drawable
>failed to create drawable
>failed to create drawable
>failed to create drawable
>failed to create drawable
>
>
>/var/log/Xorg.0.log:
>
>
>X.Org X Server 1.4.99.901 (1.5.0 RC 1)
>Release Date: 5 September 2007
>X Protocol Version 11, Revision 0
>Build Operating System: Linux 2.6.18-53.1.14.el5xen x86_64 
>Current Operating System: Linux localhost.localdomain 2.6.25-1.fc9.x86_64 #1 SMP Thu Apr 17 01:11:31 EDT 2008 x86_64
>Build Date: 14 April 2008  11:48:57PM
>Build ID: xorg-x11-server 1.4.99.901-22.20080415.fc9 
>	Before reporting problems, check http://wiki.x.org
>	to make sure that you have the latest version.
>Module Loader present
>Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 24 01:53:19 2008
>(==) Using config file: "/etc/X11/xorg.conf"
>(==) ServerLayout "Default Layout"
>(**) |-->Screen "Screen0" (0)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Videocard0"
>(==) No monitor specified for screen "Screen0".
>	Using a default monitor configuration.
>(**) |-->Input Device "Keyboard0"
>(**) |-->Input Device "Synaptics Touchpad"
>(==) Automatically adding devices
>(==) Automatically enabling devices
>(==) No FontPath specified.  Using compiled-in default.
>(==) FontPath set to:
>	catalogue:/etc/X11/fontpath.d,
>	built-ins
>(==) ModulePath set to "/usr/lib64/xorg/modules"
>(II) No default mouse found, adding one
>(**) |-->Input Device "<default pointer>"
>(II) Open ACPI successful (/var/run/acpid.socket)
>(II) Loader magic: 0x7b3f20
>(II) Module ABI versions:
>	X.Org ANSI C Emulation: 0.3
>	X.Org Video Driver: 4.0
>	X.Org XInput driver : 2.0
>	X.Org Server Extension : 1.0
>	X.Org Font Renderer : 0.5
>(II) Loader running on linux
>(--) using VT number 7
>
>(--) PCI:*(0@0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0x90380000/524288, 0x80000000/268435456, 0x90400000/262144, I/O @ 0x000020e0/8
>(--) PCI: (0@0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0x90300000/524288
>(II) System resource ranges:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) "extmod" will be loaded by default.
>(II) "dbe" will be loaded by default.
>(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
>(II) "freetype" will be loaded by default.
>(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
>(II) "dri2" will be loaded by default.
>(II) LoadModule: "synaptics"
>
>(II) Loading /usr/lib64/xorg/modules/input//synaptics_drv.so
>(II) Module synaptics: vendor="X.Org Foundation"
>	compiled for 4.3.99.902, module version = 1.0.0
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 2.0
>(II) LoadModule: "glx"
>
>(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
>(II) Module glx: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 1.0
>(==) AIGLX enabled
>(==) Exporting typical set of GLX visuals
>(II) Loading extension GLX
>(II) LoadModule: "xtrap"
>
>(II) Loading /usr/lib64/xorg/modules/extensions//libxtrap.so
>(II) Module xtrap: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 1.0
>(II) Loading extension DEC-XTRAP
>(II) LoadModule: "dri"
>
>(II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
>(II) Module dri: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 1.0
>(II) Loading extension XFree86-DRI
>(II) LoadModule: "extmod"
>
>(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
>(II) Module extmod: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 1.0
>(II) Loading extension SELinux
>(II) Loading extension SHAPE
>(II) Loading extension MIT-SUNDRY-NONSTANDARD
>(II) Loading extension BIG-REQUESTS
>(II) Loading extension SYNC
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XC-MISC
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-Misc
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension TOG-CUP
>(II) Loading extension Extended-Visual-Information
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "dbe"
>
>(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
>(II) Module dbe: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 1.0
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "freetype"
>
>(II) Loading /usr/lib64/xorg/modules/fonts//libfreetype.so
>(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
>	compiled for 1.4.99.901, module version = 2.1.0
>	Module class: X.Org Font Renderer
>	ABI class: X.Org Font Renderer, version 0.5
>(II) Loading font FreeType
>(II) LoadModule: "dri2"
>
>(II) Loading /usr/lib64/xorg/modules/extensions//libdri2.so
>(II) Module dri2: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 1.0
>(II) Loading extension DRI2
>(II) LoadModule: "intel"
>
>(II) Loading /usr/lib64/xorg/modules/drivers//intel_drv.so
>(II) Module intel: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 2.2.1
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 4.0
>(II) Loading sub module "intel_master"
>(II) LoadModule: "intel_master"
>
>(II) Loading /usr/lib64/xorg/modules/drivers//intel_master_drv.so
>(II) Module intel: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 2.2.1
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 4.0
>(II) LoadModule: "kbd"
>
>(II) Loading /usr/lib64/xorg/modules/input//kbd_drv.so
>(II) Module kbd: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.3.0
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 2.0
>(II) LoadModule: "synaptics"
>
>(II) Reloading /usr/lib64/xorg/modules/input//synaptics_drv.so
>(II) LoadModule: "mouse"
>
>(II) Loading /usr/lib64/xorg/modules/input//mouse_drv.so
>(II) Module mouse: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.3.0
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 2.0
>(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
>	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
>	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
>	965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
>(II) Primary Device is: PCI 00@00:02:0
>(II) resource ranges after xf86ClaimFixedResources() call:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) resource ranges after probing:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
>(II) Loading sub module "int10"
>(II) LoadModule: "int10"
>
>(II) Loading /usr/lib64/xorg/modules//libint10.so
>(II) Module int10: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.0.0
>	ABI class: X.Org Video Driver, version 4.0
>(II) Loading sub module "vbe"
>(II) LoadModule: "vbe"
>
>(II) Loading /usr/lib64/xorg/modules//libvbe.so
>(II) Module vbe: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.1.0
>	ABI class: X.Org Video Driver, version 4.0
>(II) Loading sub module "vgahw"
>(II) LoadModule: "vgahw"
>
>(II) Loading /usr/lib64/xorg/modules//libvgahw.so
>(II) Module vgahw: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 0.1.0
>	ABI class: X.Org Video Driver, version 4.0
>(**) intel(0): Depth 24, (--) framebuffer bpp 32
>(==) intel(0): RGB weight 888
>(==) intel(0): Default visual is TrueColor
>(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
>(--) intel(0): Chipset: "945GM"
>(--) intel(0): Linear framebuffer at 0x80000000
>(--) intel(0): IO registers at addr 0x90380000
>(II) intel(0): 2 display pipes available.
>(==) intel(0): Using XAA for acceleration
>(II) Loading sub module "ddc"
>(II) LoadModule: "ddc"
>(II) Module "ddc" already built-in
>(II) Loading sub module "i2c"
>(II) LoadModule: "i2c"
>(II) Module "i2c" already built-in
>(II) intel(0): Output VGA has no monitor section
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): Output LVDS has no monitor section
>(II) intel(0): I2C bus "LVDSDDC_C" initialized.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) Loading sub module "int10"
>(II) LoadModule: "int10"
>
>(II) Reloading /usr/lib64/xorg/modules//libint10.so
>(II) intel(0): initializing int10
>(WW) intel(0): Bad V_BIOS checksum
>(II) intel(0): Primary V_BIOS segment is: 0xc000
>(II) intel(0): VESA BIOS detected
>(II) intel(0): VESA VBE Version 3.0
>(II) intel(0): VESA VBE Total Mem: 16064 kB
>(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
>(II) intel(0): VESA VBE OEM Software Rev: 1.0
>(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
>(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
>(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
>(II) intel(0): I2C bus "SDVOB DDC Bus" initialized.
>(II) intel(0): Output TMDS-1 has no monitor section
>(II) intel(0): SDVO device VID/DID: 04:AA.03, clock range 25.0MHz - 165.0MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
>(II) intel(0): No SDVO device found on SDVOC
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
>(II) intel(0): Output TV has no monitor section
>(II) intel(0): Current clock rate multiplier: 1
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): Output VGA disconnected
>(II) intel(0): Output LVDS connected
>(II) intel(0): Output TMDS-1 disconnected
>(II) intel(0): Output TV disconnected
>(II) intel(0): Using exact sizes for initial modes
>(II) intel(0): Output LVDS using initial mode 1280x800
>(II) intel(0): Monitoring connected displays enabled
>(II) intel(0): detected 256 kB GTT.
>(II) intel(0): detected 16124 kB stolen memory.
>(==) intel(0): video overlay key set to 0x101fe
>(==) intel(0): Will not try to enable page flipping
>(==) intel(0): Triple buffering disabled
>(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
>(==) intel(0): DPI set to (96, 96)
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>
>(II) Loading /usr/lib64/xorg/modules//libfb.so
>(II) Module fb: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.3
>(II) Loading sub module "xaa"
>(II) LoadModule: "xaa"
>
>(II) Loading /usr/lib64/xorg/modules//libxaa.so
>(II) Module xaa: vendor="X.Org Foundation"
>	compiled for 1.4.99.901, module version = 1.2.0
>	ABI class: X.Org Video Driver, version 4.0
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"
>(II) Module "ramdac" already built-in
>(II) intel(0): Comparing regs from server start up to After PreInit
>(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
>(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
>(WW) intel(0): PP_STATUS after: on, ready, sequencing on
>(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0000
>(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
>(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
>(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
>(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
>(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
>(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
>(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
>(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
>(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
>(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
>(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
>(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
>(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
>(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
>(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
>(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
>(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
>(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
>(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
>(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
>(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
>(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
>(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
>(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
>(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
>(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
>(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
>(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
>(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
>(WW) intel(0): Register 0x5018 (GPIOC) changed from 0x00001818 to 0x00001010
>(WW) intel(0): Register 0x5020 (GPIOE) changed from 0x00001818 to 0x00001010
>(WW) intel(0): Register 0x5100 (GMBUS0) changed from 0x00000002 to 0x00000000
>(==) Depth 24 pixmap format is 32 bpp
>(II) do I need RAC?  No, I don't.
>(II) resource ranges after preInit:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
>(II) intel(0): Kernel reported 483584 total, 1 used
>(II) intel(0): I830CheckAvailableMemory: 1934332 kB available
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 12, (OK)
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 12, (OK)
>drmOpenByBusid: Searching for BusID pci:0000:00:02.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 12, (OK)
>drmOpenByBusid: drmOpenMinor returns 12
>drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
>(II) [drm] DRM interface version 1.3
>(II) [drm] DRM open master succeeded.
>(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
>(II) intel(0): [drm] framebuffer mapped by ddx driver
>(II) intel(0): [drm] added 1 reserved context for kernel
>(II) intel(0): X context handle = 0x1
>(II) intel(0): [drm] installed DRM signal handler
>(==) intel(0): VideoRam: 262144 KB
>(**) intel(0): Framebuffer compression disabled
>(**) intel(0): Tiling enabled
>(II) intel(0): Attempting memory allocation with tiled buffers.
>(II) intel(0): Allocating 3840 scanlines for pixmap cache
>(II) intel(0): Success.
>(II) intel(0): Increasing the scanline pitch to allow tiling mode (1280 -> 2048).
>(II) intel(0): [drm] Registers = 0x90380000
>(II) intel(0): [drm] ring buffer = 0x80000000
>(II) intel(0): [drm] mapped front buffer at 0x84000000, handle = 0x84000000
>(II) intel(0): [drm] mapped back buffer at 0x81000000, handle = 0x81000000
>(II) intel(0): [drm] mapped depth buffer at 0x82000000, handle = 0x82000000
>(II) intel(0): [drm] mapped classic textures at 0x88000000, handle = 0x88000000
>(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
>(II) intel(0): [dri] visual configs initialized
>(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
>(II) intel(0): Page Flipping disabled
>(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
>(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
>	Screen to screen bit blits
>	Solid filled rectangles
>	8x8 mono pattern filled rectangles
>	Indirect CPU to Screen color expansion
>	Solid Horizontal and Vertical Lines
>	Setting up tile and stipple cache:
>		32 128x128 slots
>		32 256x256 slots
>		16 512x512 slots
>(==) intel(0): Backing store disabled
>(==) intel(0): Silken mouse enabled
>(II) intel(0): Initializing HW Cursor
>(II) intel(0): [DRI] installation complete
>(II) intel(0): Current clock rate multiplier: 1
>(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01000000 (pgoffset 4096)
>(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x02000000 (pgoffset 8192)
>(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x04000000 (pgoffset 16384)
>(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x08000000 (pgoffset 32768)
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
>(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB, 0x000000007f020000 physical
>)
>(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
>(II) intel(0): 0x00032000-0x00032fff: overlay registers (4 kB, 0x000000007f032000 physical
>)
>(II) intel(0): 0x00033000-0x00042fff: xaa scratch (64 kB)
>(II) intel(0): 0x00fbf000:            end of stolen memory
>(II) intel(0): 0x01000000-0x01ffffff: back buffer (10240 kB) X tiled
>(II) intel(0): 0x02000000-0x02ffffff: depth buffer (10240 kB) X tiled
>(II) intel(0): 0x04000000-0x07ffffff: front buffer (40960 kB) X tiled
>(II) intel(0): 0x08000000-0x09ffffff: classic textures (32768 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(WW) intel(0): ESR is 0x00000010, page table error
>(WW) intel(0): PGTBL_ER is 0x00000102, host pte data, display B pte
>(WW) intel(0): Existing errors found in hardware state.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is off
>(II) intel(0):   Display plane B is now disabled and connected to pipe A.
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane A is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0):   Output TMDS-1 is connected to pipe none
>(II) intel(0):   Output TV is connected to pipe none
>(II) intel(0): [drm] dma control initialized, using IRQ 16
>(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
>(II) intel(0): DPMS enabled
>(II) intel(0): Set up textured video
>(II) intel(0): Set up overlay video
>(II) intel(0): direct rendering: Enabled
>(--) RandR disabled
>(II) Initializing built-in extension MIT-SHM
>(II) Initializing built-in extension XInputExtension
>(II) Initializing built-in extension XTEST
>(II) Initializing built-in extension XKEYBOARD
>(II) Initializing built-in extension XINERAMA
>(II) Initializing built-in extension XFIXES
>(II) Initializing built-in extension RENDER
>(II) Initializing built-in extension RANDR
>(II) Initializing built-in extension COMPOSITE
>(II) Initializing built-in extension DAMAGE
>(II) Initializing built-in extension XEVIE
>(II) AIGLX: Screen 0 is not DRI2 capable
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 13, (OK)
>drmOpenByBusid: Searching for BusID pci:0000:00:02.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 13, (OK)
>drmOpenByBusid: drmOpenMinor returns 13
>drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
>(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
>(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
>(II) AIGLX: Loaded and initialized /usr/lib64/dri/i915_dri.so
>(II) GLX: Initialized DRI GL provider for screen 0
>(II) intel(0): Setting screen physical size to 286 x 178
>(**) Option "CoreKeyboard"
>(**) Keyboard0: always reports core events
>(**) Option "Protocol" "standard"
>(**) Keyboard0: Protocol: standard
>(**) Option "AutoRepeat" "500 30"
>(**) Option "XkbRules" "xorg"
>(**) Keyboard0: XkbRules: "xorg"
>(**) Option "XkbModel" "pc105"
>(**) Keyboard0: XkbModel: "pc105"
>(**) Option "XkbLayout" "us+inet"
>(**) Keyboard0: XkbLayout: "us+inet"
>(**) Option "CustomKeycodes" "off"
>(**) Keyboard0: CustomKeycodes disabled
>(II) Synaptics touchpad driver version 0.14.6 (1406)
>(--) Synaptics Touchpad auto-dev sets device to /dev/input/event6
>(**) Option "Device" "/dev/input/event6"
>(**) Option "SHMConfig" "on"
>(**) Option "LeftEdge" "20"
>(**) Option "RightEdge" "1200"
>(**) Option "TopEdge" "20"
>(**) Option "BottomEdge" "370"
>(**) Option "FingerLow" "10"
>(**) Option "FingerHigh" "20"
>(**) Option "MaxTapTime" "100"
>(**) Option "MaxTapMove" "100"
>(**) Option "MaxDoubleTapTime" "200"
>(**) Option "VertScrollDelta" "10"
>(**) Option "HorizScrollDelta" "10"
>(**) Option "VertEdgeScroll" "0"
>(**) Option "HorizEdgeScroll" "0"
>(**) Option "VertTwoFingerScroll" "1"
>(**) Option "HorizTwoFingerScroll" "1"
>(**) Option "TapButton2" "3"
>(**) Option "TapButton3" "2"
>(**) Option "PressureMotionMinZ" "10"
>(--) Synaptics Touchpad touchpad found
>(**) Option "SendCoreEvents" "true"
>(**) Option "CorePointer"
>(**) Synaptics Touchpad: always reports core events
>(WW) <default pointer>: No Device specified, looking for one...
>(II) <default pointer>: Setting Device option to "/dev/input/mice"
>(--) <default pointer>: Device: "/dev/input/mice"
>(==) <default pointer>: Protocol: "Auto"
>(**) Option "AlwaysCore"
>(**) <default pointer>: always reports core events
>(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
>(**) <default pointer>: ZAxisMapping: buttons 4 and 5
>(**) <default pointer>: Buttons: 9
>(**) <default pointer>: Sensitivity: 1
>(II) evaluating device (<default pointer>)
>(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
>(II) evaluating device (Synaptics Touchpad)
>(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: MOUSE)
>(II) evaluating device (Keyboard0)
>(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
>(II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
>(II) <default pointer>: ps2EnableDataReporting: succeeded
>(--) Synaptics Touchpad auto-dev sets device to /dev/input/event6
>(**) Option "Device" "/dev/input/event6"
>(--) Synaptics Touchpad touchpad found
>(II) LoadModule: "evdev"
>
>(II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so
>(II) Module evdev: vendor="X.Org Foundation"
>	compiled for 0.0.0, module version = 1.0.0
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 2.0
>(**) Macintosh mouse button emulation: always reports core events
>(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
>(II) Macintosh mouse button emulation: Found x and y relative axes
>(II) Macintosh mouse button emulation: Found mouse buttons
>(II) Macintosh mouse button emulation: Configuring as mouse
>(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
>(**) HID 05ac:1000: always reports core events
>(**) HID 05ac:1000: Device: "/dev/input/event4"
>(II) HID 05ac:1000: Found x and y relative axes
>(II) HID 05ac:1000: Found mouse buttons
>(II) HID 05ac:1000: Configuring as mouse
>(II) XINPUT: Adding extended input device "HID 05ac:1000" (type: MOUSE)
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) XAA: Evicting pixmaps
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
>(II) intel(0): EDID vendor "APP", prod id 40030
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a
>(II) intel(0): fbc disabled on plane a

Actions: View

Attachments on bug 427643: 291454 | 291455 | 291456 | 302831 | 303605 | 304010