Attachment 303616 Details for Bug 443767 – dmesg from Fedora 9 Live CD

dmesg from Fedora 9 Live CD

dmesg-fedora-9-LiveCD (text/plain), 21.72 KB, created by Àlex Magaz Graça on 2008-04-24 12:03:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Àlex Magaz Graça

Created: 2008-04-24 12:03:59 UTC

Size: 21.72 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-0.234.rc9.git1.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080404 (Red Hat 4.3.0-6) (GCC) ) #1 SMP Tue Apr 15 18:37:15 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007d2afe00 (usable)
> BIOS-e820: 000000007d2afe00 - 000000007d2b1ea0 (ACPI NVS)
> BIOS-e820: 000000007d2b1ea0 - 000000007e000000 (reserved)
> BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
> BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
>1106MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>found SMP MP-table at [c00f9bf0] 000f9bf0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 512687) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   512687
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   512687
>On node 0 totalpages: 512687
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2213 pages used for memmap
>  HighMem zone: 281098 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.5 present.
>Using APIC driver default
>ACPI: RSDP 000E5C10, 0014 (r0 COMPAQ)
>ACPI: RSDT 7D2C1E40, 0044 (r1 HPQOEM SLIC-BPC 20070718             0)
>ACPI: FACP 7D2C1EE8, 0074 (r1 COMPAQ BEARLAKE        1             0)
>ACPI: DSDT 7D2C2427, A370 (r1 COMPAQ DSDT_PRJ        1 MSFT  100000E)
>ACPI: FACS 7D2C1E00, 0040
>ACPI: APIC 7D2C1F5C, 0084 (r1 COMPAQ BEARLAKE        1             0)
>ACPI: ASF! 7D2C1FE0, 0063 (r32 COMPAQ BEARLAKE        1             0)
>ACPI: MCFG 7D2C2043, 003C (r1 COMPAQ BEARLAKE        1             0)
>ACPI: TCPA 7D2C207F, 0032 (r1 COMPAQ BEARLAKE        1             0)
>ACPI: SLIC 7D2C20B1, 0176 (r1 HPQOEM SLIC-BPC        1             0)
>ACPI: HPET 7D2C2227, 0038 (r1 COMPAQ BEARLAKE        1             0)
>ACPI: DMAR 7D2C225F, 0198 (r1 COMPAQ BEARLAKE        1             0)
>ACPI: DMI detected: Hewlett-Packard
>ACPI: PM-Timer IO Port: 0xf808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 80000000 (gap: 7e000000:76000000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
>PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 508682
>Kernel command line: initrd=initrd0.img root=CDLABEL=Fedora-9-PR-i686-20080416 rootfstype=iso9660 ro quiet liveimg rhgb  BOOT_IMAGE=vmlinuz0 
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07b8000 soft=c0798000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2327.563 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2023764k/2050748k available (2234k kernel code, 25872k reserved, 1119k data, 284k init, 1133244k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074e000 - 0xc0795000   ( 284 kB)
>      .data : 0xc062ea6d - 0xc0746800   (1119 kB)
>      .text : 0xc0400000 - 0xc062ea6d   (2234 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4657.94 BogoMIPS (lpj=2328972)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz stepping 0b
>Booting processor 1/1 ip 4000
>CPU 1 irqstacks, hard=c07b9000 soft=c0799000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4654.98 BogoMIPS (lpj=2327491)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz stepping 0b
>Total of 2 processors activated (9312.92 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3712 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>net_namespace: 548 bytes
>HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
>Booting paravirtualized kernel on bare hardware
>Time: 11:56:10  Date: 04/24/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region f800-f87f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region fa00-fa3f claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 17 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>system 00:0e: ioport range 0x400-0x41f has been reserved
>system 00:0e: ioport range 0x420-0x43f has been reserved
>system 00:0e: ioport range 0x440-0x45f has been reserved
>system 00:0e: ioport range 0x460-0x47f has been reserved
>system 00:0e: ioport range 0x480-0x48f has been reserved
>system 00:0e: ioport range 0xf800-0xf81f has been reserved
>system 00:0e: ioport range 0xf820-0xf83f has been reserved
>system 00:0e: ioport range 0xf840-0xf85f has been reserved
>system 00:0e: ioport range 0xf860-0xf87f has been reserved
>system 00:0e: ioport range 0xfa00-0xfa3f has been reserved
>system 00:0e: ioport range 0xfc00-0xfc7f has been reserved
>system 00:0e: ioport range 0xfc80-0xfcff has been reserved
>system 00:0e: ioport range 0xfe00-0xfe7f has been reserved
>system 00:0e: ioport range 0xfe80-0xfeff has been reserved
>system 00:0f: ioport range 0x4d0-0x4d1 has been reserved
>system 00:10: iomem range 0x0-0x9ffff could not be reserved
>system 00:10: iomem range 0x100000-0x7dffffff could not be reserved
>system 00:10: iomem range 0xe4000-0xfffff could not be reserved
>system 00:10: iomem range 0xfec01000-0xfecfffff could not be reserved
>system 00:10: iomem range 0xfed00400-0xfed3ffff could not be reserved
>system 00:10: iomem range 0xfed45000-0xffffffff could not be reserved
>system 00:10: iomem range 0xf4000000-0xf7ffffff could not be reserved
>system 00:10: iomem range 0xcd400-0xe3fff has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 4404k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1209038170.538:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7D2CD42B, 03AC (r1 COMPAQ  CPU_TM2        1 MSFT  100000E)
>ACPI: SSDT 7D2CD2AF, 017C (r1 COMPAQ      CST        1 MSFT  100000E)
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: CPU1 (power states: C1[C1] C2[C2])
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel Q35 Chipset.
>agpgart: Detected 6140K stolen memory.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 17
>0000:00:03.3: ttyS1 at I/O 0x1248 (irq = 17) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>Marking TSC unstable due to: TSC halts in idle.
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 4:846:934
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 908k
>SCSI subsystem initialized
>Driver 'sr' needs updating - please use bus_type methods
>loop: module loaded
>libata version 3.00 loaded.
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001120
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001140
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001160
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001180
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x000011a0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.2
>ata_piix 0000:00:1f.2: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 18
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x11f0 irq 14
>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x11f8 irq 15
>ata1: SATA link down (SStatus 621 SControl 300)
>ata2: SATA link down (SStatus 611 SControl 300)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 18 (level, low) -> IRQ 18
>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x1260 ctl 0x1280 bmdma 0x1210 irq 18
>ata4: SATA max UDMA/133 cmd 0x1268 ctl 0x1284 bmdma 0x1218 irq 18
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf01a6000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: EHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 ehci_hcd
>usb usb6: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf01a6400
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: EHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 ehci_hcd
>usb usb7: SerialNumber: 0000:00:1d.7
>ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:03.2 to 64
>ACPI: PCI interrupt for device 0000:00:03.2 disabled
>usb 6-4: new high speed USB device using ehci_hcd and address 2
>usb 6-4: configuration #1 chosen from 1 choice
>usb 6-4: New USB device found, idVendor=13fe, idProduct=1d00
>usb 6-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 6-4: Product: DataTraveler 2.0
>usb 6-4: Manufacturer: Kingston
>usb 6-4: SerialNumber: 5B810B000974
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>scsi 4:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
>Driver 'sd' needs updating - please use bus_type methods
>sd 4:0:0:0: [sda] 3903488 512-byte hardware sectors (1999 MB)
>sd 4:0:0:0: [sda] Write Protect is off
>sd 4:0:0:0: [sda] Mode Sense: 23 00 00 00
>sd 4:0:0:0: [sda] Assuming drive cache: write through
>sd 4:0:0:0: [sda] 3903488 512-byte hardware sectors (1999 MB)
>sd 4:0:0:0: [sda] Write Protect is off
>sd 4:0:0:0: [sda] Mode Sense: 23 00 00 00
>sd 4:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1
>sd 4:0:0:0: [sda] Attached SCSI removable disk

Actions: View

Attachments on bug 443767: 303616