Attachment 303636 Details for Bug 439398 – dmesg dump from FC9 installer

dmesg dump from FC9 installer

dmesg.log (text/plain), 15.45 KB, created by ryan roth on 2008-04-24 14:21:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: ryan roth

Created: 2008-04-24 14:21:58 UTC

Size: 15.45 KB

patch

obsolete

>ersal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x000060c0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>libata version 3.00 loaded.
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.x86_64 uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 21, io mem 0xd0704c00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.x86_64 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>sky2 0000:03:00.0: v1.21 addr 0xd0400000 irq 17 Yukon-EC Ultra (0xb4) rev 3
>sky2 eth0: addr 00:1e:c2:18:d6:c4
>ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI version 1.0
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd0704800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 6 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: EHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.x86_64 ehci_hcd
>usb usb3: SerialNumber: 0000:00:1d.7
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 16, io base 0x000060a0
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.x86_64 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x00006060
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.x86_64 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb 2-2: new high speed USB device using ehci_hcd and address 3
>firewire_core: created device fw0: GUID 001f5bfffe22002e, S400
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.x86_64 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.2
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x6108 ctl 0x6124 bmdma 0x60e0 irq 21
>ata2: PATA max UDMA/100 cmd 0x6100 ctl 0x6120 bmdma 0x60e8 irq 21
>usb 2-2: configuration #1 chosen from 1 choice
>hub 2-2:1.0: USB hub found
>hub 2-2:1.0: 4 ports detected
>usb 2-2: New USB device found, idVendor=050d, idProduct=0416
>usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>ata1.00: ATAPI: HL-DT-ST DVDRW  GSA-S10N, BP10, max UDMA/33
>usb 3-1: new high speed USB device using ehci_hcd and address 2
>ata1.00: configured for UDMA/33
>scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRW  GSA-S10N  BP10 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 18
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>usb 3-1: configuration #1 chosen from 1 choice
>usb 3-1: New USB device found, idVendor=058f, idProduct=6387
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 3-1: Product: Mass Storage Device
>usb 3-1: Manufacturer: JetFlash
>usb 3-1: SerialNumber: 836IP365
>Initializing USB Mass Storage driver...
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x60f8 ctl 0x611c bmdma 0x6020 irq 18
>ata4: SATA max UDMA/133 cmd 0x60f0 ctl 0x6118 bmdma 0x6028 irq 18
>usb 3-4: new high speed USB device using ehci_hcd and address 3
>usb 3-4: configuration #1 chosen from 1 choice
>usb 3-4: New USB device found, idVendor=05ac, idProduct=8300
>usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>ata3: SATA link down (SStatus 0 SControl 0)
>scsi4 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>ata4: SATA link down (SStatus 0 SControl 0)
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>sr 0:0:0:0: Attached scsi generic sg0 type 5
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>usb 1-1: configuration #1 chosen from 1 choice
>ISO 9660 Extensions: Microsoft Joliet Level 3
>input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input2
>Unable to load NLS charset utf8
>input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1a.0-1
>Unable to load NLS charset utf8
>input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.1/input/input3
>input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1a.0-1
>usb 1-1: New USB device found, idVendor=05ac, idProduct=1000
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>ISO 9660 Extensions: RRIP_1991A
>ISOFS: Unable to identify CD-ROM format.
>VFS: Can't find an ext2 filesystem on dev loop0.
>usb 7-1: new low speed USB device using uhci_hcd and address 2
>usb 7-1: configuration #1 chosen from 1 choice
>hiddev96hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1
>usb 7-1: New USB device found, idVendor=05ac, idProduct=8242
>usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 7-1: Product: IR Receiver
>usb 7-1: Manufacturer: Apple Computer, Inc.
>usb 7-2: new full speed USB device using uhci_hcd and address 3
>usb 7-2: configuration #1 chosen from 1 choice
>input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input4
>input,hidraw3: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2
>input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input5
>input,hidraw4: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2
>usb 7-2: New USB device found, idVendor=05ac, idProduct=0229
>usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 7-2: Product: Apple Internal Keyboard / Trackpad
>usb 7-2: Manufacturer: Apple Computer
>usb 2-2.1: new low speed USB device using ehci_hcd and address 4
>usb 2-2.1: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.7/usb2/2-2/2-2.1/2-2.1:1.0/input/input6
>input,hidraw5: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.7-2.1
>usb 2-2.1: New USB device found, idVendor=045e, idProduct=0040
>usb 2-2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
>usb 2-2.1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
>usb 2-2.1: Manufacturer: Microsoft
>usb 2-2.2: new low speed USB device using ehci_hcd and address 5
>usb 2-2.2: configuration #1 chosen from 1 choice
>input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb2/2-2/2-2.2/2-2.2:1.0/input/input7
>input,hidraw6: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-2.2
>usb 2-2.2: New USB device found, idVendor=413c, idProduct=2003
>usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2.2: Product: Dell USB Keyboard
>usb 2-2.2: Manufacturer: Dell
>appletouch: Geyser mode initialized.
>input: appletouch as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input8
>usbcore: registered new interface driver appletouch
>usb-storage: device scan complete
>scsi 4:0:0:0: Direct-Access     JetFlash TS2GJFT3         8.07 PQ: 0 ANSI: 2
>SELinux:8192 avtab hash slots allocated. Num of rules:172102
>scsi 4:0:0:0: Attached scsi generic sg1 type 0
>SELinux:8192 avtab hash slots allocated. Num of rules:172102
>Driver 'sd' needs updating - please use bus_type methods
>sd 4:0:0:0: [sda] 4005886 512-byte hardware sectors (2051 MB)
>sd 4:0:0:0: [sda] Write Protect is off
>sd 4:0:0:0: [sda] Mode Sense: 03 00 00 00
>sd 4:0:0:0: [sda] Assuming drive cache: write through
>sd 4:0:0:0: [sda] 4005886 512-byte hardware sectors (2051 MB)
>sd 4:0:0:0: [sda] Write Protect is off
>sd 4:0:0:0: [sda] Mode Sense: 03 00 00 00
>sd 4:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1
>sd 4:0:0:0: [sda] Attached SCSI removable disk
>security:  5 users, 12 roles, 2300 types, 115 bools, 1 sens, 1024 cats
>security:  72 classes, 172102 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1209004470.274:2): policy loaded auid=4294967295 ses=4294967295
>md: raid0 personality registered for level 0
>md: raid1 personality registered for level 1
>xor: automatically using best checksumming function: generic_sse
>   generic_sse:  7396.000 MB/sec
>xor: using function: generic_sse (7396.000 MB/sec)
>async_tx: api initialized (async)
>raid6: int64x1   1917 MB/s
>raid6: int64x2   2421 MB/s
>raid6: int64x4   1824 MB/s
>raid6: int64x8   1699 MB/s
>raid6: sse2x1    3093 MB/s
>raid6: sse2x2    3523 MB/s
>raid6: sse2x4    5945 MB/s
>raid6: using algorithm sse2x4 (5945 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>md: raid10 personality registered for level 10
>md: linear personality registered for level -1
>GFS2 (built Apr 15 2008 18:05:17) installed
>Lock_Nolock (built Apr 15 2008 18:05:42) installed
>JFS: nTxBlock = 8192, nTxLock = 65536
>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>device-mapper: multipath round-robin: version 1.0.0 loaded
>device-mapper: multipath emc: version 0.0.3 loaded
>appletouch: incomplete data package (first byte: 2, length: 4).
>SELinux: initialized (dev sda1, type vfat), uses genfs_contexts

Actions: View

Attachments on bug 439398: 303636 | 303804