Attachment 303678 Details for Bug 444054 – Entire dmesg

Entire dmesg

dmesg (text/plain), 39.07 KB, created by Luke Macken on 2008-04-24 19:23:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Luke Macken

Created: 2008-04-24 19:23:22 UTC

Size: 39.07 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.4-64.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sat Mar 29 09:54:46 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
> BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bf6c0000 (usable)
> BIOS-e820: 00000000bf6c0000 - 00000000bf6cc000 (ACPI data)
> BIOS-e820: 00000000bf6cc000 - 00000000bf700000 (ACPI NVS)
> BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
>Warning only 4GB will be used.
>Use a HIGHMEM64G enabled kernel.
>3200MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f6ab0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->  1048576
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->  1048576
>On node 0 totalpages: 1048576
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 6400 pages used for memmap
>  HighMem zone: 812800 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F6A80, 0024 (r2 LENOVO)
>ACPI: XSDT BF6C0D35, 0094 (r1 LENOVO TP-7T        1021  LTP        0)
>ACPI: FACP BF6C0E00, 00F4 (r3 LENOVO TP-7T        1021 LNVO        1)
>ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
>ACPI: DSDT BF6C11EC, A94C (r1 LENOVO TP-7T        1021 MSFT  3000000)
>ACPI: FACS BF6E4000, 0040
>ACPI: SSDT BF6C0FB4, 0238 (r1 LENOVO TP-7T        1021 MSFT  3000000)
>ACPI: ECDT BF6CBB38, 0052 (r1 LENOVO TP-7T        1021 LNVO        1)
>ACPI: TCPA BF6CBB8A, 0032 (r2 LENOVO TP-7T        1021 LNVO        1)
>ACPI: APIC BF6CBBBC, 0068 (r1 LENOVO TP-7T        1021 LNVO        1)
>ACPI: MCFG BF6CBC24, 003C (r1 LENOVO TP-7T        1021 LNVO        1)
>ACPI: HPET BF6CBC60, 0038 (r1 LENOVO TP-7T        1021 LNVO        1)
>ACPI: SLIC BF6CBDF0, 0176 (r1 LENOVO TP-7T        1021  LTP        0)
>ACPI: BOOT BF6CBF66, 0028 (r1 LENOVO TP-7T        1021  LTP        1)
>ACPI: ASF! BF6CBF8E, 0072 (r16 LENOVO TP-7T        1021 PTL         1)
>ACPI: SSDT BF6E2655, 025F (r1 LENOVO TP-7T        1021 INTL 20050513)
>ACPI: SSDT BF6E28B4, 00A6 (r1 LENOVO TP-7T        1021 INTL 20050513)
>ACPI: SSDT BF6E295A, 04F7 (r1 LENOVO TP-7T        1021 INTL 20050513)
>ACPI: SSDT BF6E2E51, 01D8 (r1 LENOVO TP-7T        1021 INTL 20050513)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
>swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
>swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
>swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000
>swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1040384
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07bb000 soft=c079b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1197.023 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 3093264k/4194304k available (2237k kernel code, 41808k reserved, 1131k data, 288k init, 2218752k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0750000 - 0xc0798000   ( 288 kB)
>      .data : 0xc062f789 - 0xc074a724   (1131 kB)
>      .text : 0xc0400000 - 0xc062f789   (2237 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 2397.07 BogoMIPS (lpj=1198537)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 Duo CPU     L7100  @ 1.20GHz stepping 0b
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07bc000 soft=c079c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 2394.01 BogoMIPS (lpj=1197006)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     L7100  @ 1.20GHz stepping 0b
>Total of 2 processors activated (4791.08 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 651324 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to: check_tsc_sync_source failed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>net_namespace: 64 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 11:50:43  Date: 04/24/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xfdde7, last bus=13
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: DMI System Vendor: LENOVO
>ACPI: DMI Product Name: 6476CTO
>ACPI: DMI Product Version: ThinkPad X300
>ACPI: DMI Board Name: 6476CTO
>ACPI: DMI BIOS Vendor: LENOVO
>ACPI: DMI BIOS Date: 02/27/2008
>ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
>ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Power Resource [PUBS] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnpacpi: exceeded the max number of mem resources. Max:12 Found:12
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: hpet clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>system 00:00: iomem range 0xc8000-0xcbfff has been reserved
>system 00:00: iomem range 0xcc000-0xcffff has been reserved
>system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
>system 00:00: iomem range 0x0-0x0 could not be reserved
>system 00:00: iomem range 0x0-0x0 could not be reserved
>system 00:00: iomem range 0x0-0x0 could not be reserved
>system 00:00: iomem range 0xe0000-0xe3fff has been reserved
>system 00:00: iomem range 0xe4000-0xe7fff has been reserved
>system 00:00: iomem range 0xe8000-0xebfff has been reserved
>system 00:02: ioport range 0x164e-0x164f has been reserved
>system 00:02: ioport range 0x1000-0x107f has been reserved
>system 00:02: ioport range 0x1180-0x11bf has been reserved
>system 00:02: ioport range 0x800-0x80f has been reserved
>system 00:02: ioport range 0x15e0-0x15ef has been reserved
>system 00:02: ioport range 0x1600-0x165f could not be reserved
>system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
>system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
>system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
>system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
>system 00:02: iomem range 0xfed45000-0xfed4bfff could not be reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: f4000000-f5ffffff
>  PREFETCH window: fa500000-fa5fffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: 3000-3fff
>  MEM window: f8000000-f9ffffff
>  PREFETCH window: fa600000-fa6fffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: 4000-4fff
>  MEM window: f6000000-f7ffffff
>  PREFETCH window: fa700000-fa7fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3590k freed
>Simple Boot Flag at 0x35 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1209037842.754:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key A149FFC6EE301D40
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT BF6E1B32, 0240 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
>ACPI: SSDT BF6E1DF7, 085E (r1  PmRef  Cpu0Cst      100 INTL 20050513)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT BF6E1A6A, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
>ACPI: SSDT BF6E1D72, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (34 C)
>ACPI: Thermal Zone [THM1] (32 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 965GM Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor ladder
>input: DualPoint Stick as /class/input/input2
>input: AlpsPS/2 ALPS DualPoint TouchPad as /class/input/input3
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 4:743:833
>Freeing unused kernel memory: 288k freed
>Write protecting the kernel read-only data: 894k
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfa426c00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfa427000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x000018a0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 2-5: new high speed USB device using ehci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x000018c0
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x000018e0
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb 2-5: configuration #1 chosen from 1 choice
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 20
>ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match, using nr_ports
>ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7
>usb 3-2: configuration #1 chosen from 1 choice
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x7 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfa426000 port 0xfa426100 irq 220
>ata2: SATA max UDMA/133 abar m2048@0xfa426000 port 0xfa426180 irq 220
>ata3: SATA max UDMA/133 abar m2048@0xfa426000 port 0xfa426200 irq 220
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: SAMSUNG MCCOE64G8MPP-0VA, PS105L15, max UDMA/100
>ata1.00: 125045424 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2: SATA link down (SStatus 0 SControl 0)
>ata3: SATA link down (SStatus 0 SControl 0)
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG MCCOE64G PS10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 125045424 512-byte hardware sectors (64023 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 125045424 512-byte hardware sectors (64023 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: dm-0: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 83546
>EXT3-fs: dm-0: 1 orphan inode deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1209037854.818:2): enforcing=1 old_enforcing=0 auid=4294967295
>SELinux:8192 avtab hash slots allocated.Num of rules:219007
>SELinux:8192 avtab hash slots allocated.Num of rules:219007
>security:  8 users, 12 roles, 2385 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 219007 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1209037854.991:3): policy loaded auid=4294967295
>thinkpad_acpi: ThinkPad ACPI Extras v0.17
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 7TET26WW (1.02a), EC 7THT15WW-1.00c
>thinkpad_acpi: Lenovo ThinkPad X300
>thinkpad_acpi: radio switch found; radios are enabled
>thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
>input: ThinkPad Extra Buttons as /class/input/input4
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input6
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input7
>ACPI: Sleep Button (CM) [SLPB]
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1c:25:7c:1b:28
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>input: Video Bus as /class/input/input8
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /class/input/input9
>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: AC Adapter [AC] (on-line)
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi3 : ata_piix
>input: PC Speaker as /class/input/input10
>scsi4 : ata_piix
>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14
>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15
>Linux video capture interface: v2.00
>ata5: port disabled. ignoring.
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21
>hda_intel: probe_mask set to 0x1 for device 17aa:20ac
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.26kds
>iwl4965: Copyright(c) 2003-2008 Intel Corporation
>ALSA sound/pci/hda/hda_intel.c:732: codec_mask = 0x1
>uvcvideo: Found UVC 1.00 device <unnamed> (17ef:4807)
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>ALSA sound/pci/hda/hda_generic.c:608: AUD_IN = 8
>ALSA sound/pci/hda/hda_generic.c:235: UNMUTE IN: NID=0x8 IDX=0x0
>ALSA sound/pci/hda/hda_generic.c:235: UNMUTE IN: NID=0x14 IDX=0x0
>ALSA sound/pci/hda/hda_generic.c:250: CONNECT: NID=0xc IDX=0x0
>ALSA sound/pci/hda/hda_generic.c:235: UNMUTE IN: NID=0xc IDX=0x0
>ALSA sound/pci/hda/hda_generic.c:220: UNMUTE OUT: NID=0xc
>ALSA sound/pci/hda/hda_generic.c:645: [Capture Source] NID=0x8, #SRC=1
>ALSA sound/pci/hda/hda_generic.c:648:   [Mic] IDX=0x0
>ALSA sound/pci/hda/hda_generic.c:287: AUD_OUT found 4
>ALSA sound/pci/hda/hda_generic.c:250: CONNECT: NID=0xa IDX=0x0
>ALSA sound/pci/hda/hda_generic.c:235: UNMUTE IN: NID=0xa IDX=0x0
>ALSA sound/pci/hda/hda_generic.c:220: UNMUTE OUT: NID=0xa
>ALSA sound/pci/hda/hda_generic.c:235: UNMUTE IN: NID=0x12 IDX=0x0
>ALSA sound/pci/hda/hda_generic.c:220: UNMUTE OUT: NID=0x12
>ALSA sound/pci/hda/hda_generic.c:220: UNMUTE OUT: NID=0x12
>ALSA sound/pci/hda/hda_generic.c:287: AUD_OUT found 3
>ALSA sound/pci/hda/hda_generic.c:287: AUD_OUT found 4
>ALSA sound/pci/hda/hda_generic.c:250: CONNECT: NID=0x22 IDX=0x1
>ALSA sound/pci/hda/hda_generic.c:235: UNMUTE IN: NID=0x22 IDX=0x1
>ALSA sound/pci/hda/hda_generic.c:220: UNMUTE OUT: NID=0x22
>ALSA sound/pci/hda/hda_generic.c:250: CONNECT: NID=0x7 IDX=0x0
>ALSA sound/pci/hda/hda_generic.c:235: UNMUTE IN: NID=0x7 IDX=0x0
>ALSA sound/pci/hda/hda_generic.c:220: UNMUTE OUT: NID=0x7
>ALSA sound/pci/hda/hda_generic.c:235: UNMUTE IN: NID=0x11 IDX=0x0
>ALSA sound/pci/hda/hda_generic.c:220: UNMUTE OUT: NID=0x11
>ALSA sound/pci/hda/hda_generic.c:220: UNMUTE OUT: NID=0x11
>ALSA sound/pci/hda/hda_generic.c:250: CONNECT: NID=0x8 IDX=0x0
>ALSA sound/pci/hda/hda_generic.c:754: [Master Playback Volume] NID=0x4, DIR=OUT
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>iwl4965: Detected Intel Wireless WiFi Link 4965AGN
>iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
>phy0: Selected rate control algorithm 'iwl-4965-rs'
>Clocksource tsc unstable (delta = -263495739 ns)
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20
>mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>Loading iSCSI transport class v2.0-724.
>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>audit(1209052264.184:4): audit_pid=1800 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>vmmon: module license 'unspecified' taints kernel.
>[1992]: VMCI: Driver initialized.
>[1992]: Module vmmon: registered with major=10 minor=165
>[1992]: Module vmmon: initialized
>SELinux: initialized (dev vmblock, type vmblock), uses genfs_contexts
>/dev/vmnet: open called by PID 2064 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth0: peer interface eth0 not found, will wait for it to come up
>bridge-eth0: attached
>/dev/vmnet: open called by PID 2081 (vmnet-netifup)
>/dev/vmnet: hub 1 does not exist, allocating memory.
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 2080 (vmnet-dhcpd)
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 2103 (vmnet-bridge)
>/dev/vmnet: hub 2 does not exist, allocating memory.
>/dev/vmnet: port on hub 2 successfully opened
>bridge-wlan0: peer interface wlan0 not found, will wait for it to come up
>bridge-wlan0: attached
>/dev/vmnet: open called by PID 2112 (vmnet-netifup)
>/dev/vmnet: hub 8 does not exist, allocating memory.
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 2125 (vmnet-dhcpd)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 2136 (vmnet-natd)
>/dev/vmnet: port on hub 8 successfully opened
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bridge firewalling registered
>virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>virbr0: starting userspace STP failed, starting kernel STP
>[drm] Initialized drm 1.1.0 20060810
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
>vmnet1: no IPv6 routers present
>vmnet8: no IPv6 routers present
>virbr0: no IPv6 routers present
>BUG: unable to handle kernel paging request at virtual address fffffff0
>printing eip: f8b9f755 *pde = 00799067 *pte = 00000000 
>Oops: 0000 [#1] SMP 
>Modules linked in: i915 drm ipt_MASQUERADE iptable_nat nf_nat bridge rfcomm l2cap bluetooth vmnet(P)(U) parport_pc parport vmblock(U) vmmon(P)(U) fuse sunrpc nf_conntrack_ipv4 ipt_REJECT iptable_filter ip_tables nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables x_tables ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi scsi_transport_iscsi cpufreq_ondemand acpi_cpufreq loop dm_multipath ipv6 kvm_intel kvm arc4 ecb blkcipher uvcvideo iwl4965 snd_hda_intel compat_ioctl32 iwlcore videodev pcspkr ata_piix snd_seq_dummy i2c_i801 iTCO_wdt v4l1_compat mac80211 cfg80211 i2c_core iTCO_vendor_support pata_acpi v4l2_common ata_generic snd_seq_oss ac snd_seq_midi_event battery snd_seq video snd_seq_device output snd_pcm_oss snd_mixer_oss e1000 button snd_pcm snd_timer snd_page_alloc snd_hwdep snd soundcore sg joydev thinkpad_acpi hwmon dm_snapshot dm_zero dm_mirror dm_mod ahci libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
>
>Pid: 2830, comm: gnome-power-man Tainted: P        (2.6.24.4-64.fc8 #1)
>EIP: 0060:[<f8b9f755>] EFLAGS: 00010246 CPU: 0
>EIP is at uvc_get_video_ctrl+0x143/0x153 [uvcvideo]
>EAX: 00000000 EBX: 00000001 ECX: 00000000 EDX: f58c0bcc
>ESI: f3b5d758 EDI: 0000001a EBP: f711a030 ESP: f3b5d6e0
> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
>Process gnome-power-man (pid: 2830, ti=f3b5d000 task=f58f33b0 task.ti=f3b5d000)
>Stack: 00000001 00000001 f3b5d6fa 0000001a 000003e8 00000082 0000fff7 00000000 
>       00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
>       f711a030 f3b5d83c f3b5d83c f8b9fbcb 00000082 fffaffe7 ffffff7f fbefff9f 
>Call Trace:
> [<f8b9fbcb>] uvc_probe_video+0x50/0x11d [uvcvideo]
> [<f8b9de19>] uvc_v4l2_try_format+0x26f/0x2f1 [uvcvideo]
> [<f8b9e618>] uvc_v4l2_do_ioctl+0x636/0xce7 [uvcvideo]
> [<f8a9c511>] v4l_compat_translate_ioctl+0x379/0x1c5c [v4l1_compat]
> [<c046b2f4>] mempool_alloc+0x37/0xd5
> [<f89535ea>] ahci_qc_prep+0x4f/0x145 [ahci]
> [<c04f1b40>] __generic_unplug_device+0x1d/0x1f
> [<c04eed62>] elv_insert+0x146/0x1ec
> [<c04f1f03>] blk_plug_device+0x74/0xbb
> [<c04f3171>] __make_request+0x4a0/0x501
> [<c046b2f4>] mempool_alloc+0x37/0xd5
> [<c046b2f4>] mempool_alloc+0x37/0xd5
> [<f89535ea>] ahci_qc_prep+0x4f/0x145 [ahci]
> [<f8a0377a>] ata_qc_issue+0x54d/0x5a6 [libata]
> [<f8a09624>] ata_scsi_rw_xlat+0x13d/0x1f8 [libata]
> [<f8901b88>] scsi_dispatch_cmd+0x1a7/0x218 [scsi_mod]
> [<f8906f01>] scsi_request_fn+0x2f7/0x341 [scsi_mod]
> [<c04f1b17>] blk_remove_plug+0x60/0x6c
> [<c04f1b40>] __generic_unplug_device+0x1d/0x1f
> [<c04eed62>] elv_insert+0x146/0x1ec
> [<c04f1f03>] blk_plug_device+0x74/0xbb
> [<c04f3171>] __make_request+0x4a0/0x501
> [<c04ddb8d>] symhash+0xe/0x31
> [<c04a47ab>] __find_get_block+0x175/0x17f
> [<c04a47f0>] __getblk+0x3b/0x297
> [<c04e1c9d>] constraint_expr_eval+0x280/0x3ea
> [<c04e2380>] security_compute_av+0x388/0x41e
> [<c04d41b0>] avc_node_delete+0x23/0x2c
> [<c04d4363>] avc_alloc_node+0x103/0x15a
> [<c04d45a4>] avc_has_perm_noaudit+0x1ea/0x33a
> [<f8b9ec3a>] uvc_v4l2_do_ioctl+0xc58/0xce7 [uvcvideo]
> [<f8b9dfe2>] uvc_v4l2_do_ioctl+0x0/0xce7 [uvcvideo]
> [<c0468e39>] find_lock_page+0x19/0x7f
> [<c0423fd4>] kunmap_atomic+0x54/0xad
> [<c0424000>] kunmap_atomic+0x80/0xad
> [<f8b3eb0c>] video_usercopy+0x172/0x237 [videodev]
> [<c04d5d09>] file_has_perm+0x89/0x91
> [<f8b9dba4>] uvc_v4l2_ioctl+0x3b/0x41 [uvcvideo]
> [<f8b9dfe2>] uvc_v4l2_do_ioctl+0x0/0xce7 [uvcvideo]
> [<c04930cc>] do_ioctl+0x4c/0x62
> [<c0493319>] vfs_ioctl+0x237/0x249
> [<c0493370>] sys_ioctl+0x45/0x5d
> [<c04051da>] syscall_call+0x7/0xb
> =======================
>Code: 8b 85 70 0d 00 00 0f b6 4e 02 3b 48 20 77 22 8b 50 24 6b c1 34 83 ea 34 01 c2 74 15 0f b6 46 03 3b 42 2c 77 0c c1 e0 05 03 42 30 <8b> 40 f0 89 46 14 31 c0 83 c4 3c 5b 5e 5f 5d c3 55 57 56 53 89 
>EIP: [<f8b9f755>] uvc_get_video_ctrl+0x143/0x153 [uvcvideo] SS:ESP 0068:f3b5d6e0
>---[ end trace 1b38a23ffb15b01a ]---
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>bridge-eth0: enabling the bridge
>bridge-eth0: up
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>bridge-wlan0: enabling the bridge
>bridge-wlan0: is a Wireless Adapter
>vmnet: You are trying to use wireless bridged networking together with
>vmnet: vmware-any-any-update.  This is not supported configuration, and
>vmnet: your wireless bridge will probably not work.
>bridge-wlan0: up
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:12:17:ca:08:cc
>wlan0: RX authentication from 00:12:17:ca:08:cc (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:12:17:ca:08:cc
>wlan0: authentication frame received from 00:12:17:ca:08:cc, but not in authenticate state - ignored
>wlan0: authentication frame received from 00:12:17:ca:08:cc, but not in authenticate state - ignored
>wlan0: RX AssocResp from 00:12:17:ca:08:cc (capab=0x401 status=0 aid=8)
>wlan0: associated
>wlan0: association frame received from 00:12:17:ca:08:cc, but not in associate state - ignored
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>wlan0: no IPv6 routers present
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:12:17:bf:a1:06
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:13:10:ea:65:34
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:13:10:ea:65:34
>wlan0: RX authentication from 00:13:10:ea:65:34 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:13:10:ea:65:34
>wlan0: authentication frame received from 00:13:10:ea:65:34, but not in authenticate state - ignored
>wlan0: authentication frame received from 00:13:10:ea:65:34, but not in authenticate state - ignored
>wlan0: RX AssocResp from 00:13:10:ea:65:34 (capab=0x411 status=0 aid=2)
>wlan0: associated
>wlan0: switched to long barker preamble (BSSID=00:13:10:ea:65:34)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>padlock: VIA PadLock not detected.
>wlan0: no IPv6 routers present
>wlan0: switched to short barker preamble (BSSID=00:13:10:ea:65:34)
>/dev/vmnet: open called by PID 10606 (vmware-vmx)
>/dev/vmnet: port on hub 8 successfully opened
>[10619]: host clock rate change request 0 -> 19
>[10619]: host clock rate change request 19 -> 1043
>wlan0: switched to long barker preamble (BSSID=00:13:10:ea:65:34)
>wlan0: switched to short barker preamble (BSSID=00:13:10:ea:65:34)
>Monitor-Mwait will be used to enter C-3 state

Actions: View

Attachments on bug 444054: 303678