Attachment 303767 Details for Bug 444132 – full log from rebooting the system to kernel panic

full log from rebooting the system to kernel panic

sagan.error (text/plain), 7.88 KB, created by Alexander Todorov on 2008-04-25 09:59:37 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Alexander Todorov

Created: 2008-04-25 09:59:37 UTC

Size: 7.88 KB

patch

obsolete

>EFI version 1.10 [14.62]
>EFI64 Running on Intel(R) Itanium Processor Family 
>EFI 1.10 IPF server rx1620 5.48 [Thu Nov 10 15:08:03 2005] firmware by HP
>
>
>
>This boot experienced the following problems:
>  WARNING[10]: BMC System Event Log is full
>
>Address the warning issues as soon as possible.
>Redisplay list with 'info warning' at EFI shell.
>
>Press [Space] to continue... (seconds=01)
>
>Copyright (c) 2000-2005 Broadcom Corporation
>Broadcom NetXtreme Gigabit Ethernet EFI driver v7.0.10
>
>Loading 'SysROM:Floating-Point Software Assistance Handler'...
>-- 'SysROM:Floating-Point Software Assistance Handler' returned Success
>Loading 'SysROM:SCSI Bus Driver'...
>-- 'SysROM:SCSI Bus Driver' returned Success
>Loading 'SysROM:SCSI Tape Driver'...
>-- 'SysROM:SCSI Tape Driver' returned Success
>Loading device drivers
>
>Scsi(Pun0,Lun0) HP 146 GMAX3147NC       HPC1 (320 MBytes/sec)                 
>Loading.: Red Hat Enterprise Linux AS
>Starting: Red Hat Enterprise Linux AS
>
>ELILO boot: Uncompressing Linux... done
>Loading initrd initrd-anaconda.img...done
>Linux version 2.6.9-69.EL (brewbuilder@ia64-1.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-9)) #1 SMP Tue Apr 15 18:21:55 EDT 2008
>EFI v1.10 by HP: SALsystab=0x3ee7a000 ACPI 2.0=0x3fe2c000 SMBIOS=0x3ee7c000 HCDP=0x3fe2a000
>booting generic kernel on platform hpzx1
>Warning: acpi_table_parse(ACPI_SRAT) returned 0!
>Warning: acpi_table_parse(ACPI_SLIT) returned 0!
>efi.trim_top: ignoring 4KB of memory at 0x0 due to granule hole at 0x0
>efi.trim_top: ignoring 636KB of memory at 0x1000 due to ganule hole at 0x0
>efi.trim_bottom: ignoring 15360KB of memory at 0x100000 due to granule hole at 0x0
>Initial ramdisk at: 0xe0000040fe7a5000 (8342938 bytes)
>SAL 3.1: HP version 4.27
>SAL Platform features: None
>SAL: AP wakeup using external interrupt vector 0xff
>No logical to physical processor mapping available
>ACPI: Local APIC address c0000000fee00000
>GSI 36 (level, low) -> CPU 0 (0x0000) vector 48
>2 CPUs available, 2 CPUs total
>PCDP: v3 at 0xe00000003fe2a000
>PCDP: serial console at MMIO 0xf4050000 (ttyS0, options 9600n8)
>MCA related initialization done
>Virtual mem_map starts at 0xa0007fffc7200000
>Built 1 zonelists
>Kernel command line: BOOT_IMAGE=scsi0:EFI\redhat\vmlinuz-anaconda  kate_id=429 ramdisk_size=12288 maxcpus=1 ks=http://hank.test.redhat.com/autotest/testmachines/429/testcase/ks.cfg ksdevice=00:11:85:5F:72:6A  ro
>PID hash table entries: 4096 (order: 12, 13102 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes)
>Memory: 4110720k/4138800k available (5812k code, 46816k reserved, 2332k data, 384k init)
>McKinley Errata 9 workaround not needed; disabling it
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 1024 (order: 0, 16384 bytes)
>Boot processor id 0x0/0x0
>task migration cache decay timeout: 10 msecs.
>Brought up 1 CPUs
>Total of 1 processors activated (2392.40 BogoMIPS).
>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
>Freeing initrd memory: 8128kB freed
>NET: Registered protocol family 16
>ACPI: Subsystem revision 20040816
>ACPI: Interpreter enabled
>ACPI: Using IOSAPIC for interrupt routing
>ACPI: PCI Root Bridge [L000] (00:00)
>ACPI: PCI Root Bridge [L001] (00:20)
>ACPI: PCI Root Bridge [L002] (00:40)
>ACPI: PCI Root Bridge [L004] (00:80)
>ACPI: PCI Root Bridge [L007] (00:e0)
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>GSI 16 (level, low) -> CPU 0 (0x0000) vector 49
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 49
>GSI 17 (level, low) -> CPU 0 (0x0000) vector 50
>ACPI: PCI Interrupt 0000:00:01.1[B] -> GSI 17 (level, low) -> IRQ 50
>GSI 18 (level, low) -> CPU 0 (0x0000) vector 51
>ACPI: PCI Interrupt 0000:00:01.2[C] -> GSI 18 (level, low) -> IRQ 51
>GSI 21 (level, low) -> CPU 0 (0x0000) vector 52
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 21 (level, low) -> IRQ 52
>GSI 27 (level, low) -> CPU 0 (0x0000 vector 53
>ACPI: PCI Interrupt 0000:20:01.0[A] -> GSI 27 (level, low) -> IRQ 53
>GSI 28 (level, low) -> CPU 0 (0x0000) vector 54
>ACPI: PCI Interrupt 0000:20:01.1[B] -> GSI 28 (level, low) -> IRQ 54
>GSI 29 (level, low) -> CPU 0 (0x0000) vector 55
>ACPI: PCI Interrupt 0000:20:02.0[A] -> GSI 29 (level, low) -> IRQ 55
>GSI 30 (level, low) -> CPU 0 (0x0000) vector 56
>ACPI: PCI Interrupt 0000:20:02.1[B] -> GSI 30 (level, low) -> IRQ 56
>GSI 60 (level, low) -> CPU 0 (0x0000) vector 57
>ACPI: PCI Interrupt 0000:e0:01.0[A] -> GSI 60 (level, low) -> IRQ 57
>ACPI: PCI Interrupt 0000:e0:01.1[A] -> GSI 60 (level, low) -> IRQ 57
>GSI 61 (level, low) -> CPU 0 (0x0000) vector 58
>ACPI: PCI Interrupt 0000:e0:02.0[A] -> GSI 61 (level, low) -> IRQ 58
>IOC: zx1 2.3 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
>perfmon: version 2.0 IRQ 238
>perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
>PAL Information Facility v0.5
>perfmon: added sampling format default_format
>perfmon_default_smpl: default_format v2.0 registered
>audit: initializing netlink socket (disabled)
>audit(1209116146.428:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 2296339AEC311148
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [P000] (supports C1)
>ACPI: Processor [P001] (supports C1)
>ACPI: Thermal Zone [THM0] (27 C)
>EFI Time Services Driver v0.4
>Linux agpgart interface v0.100 (c) Dave Jones
>i8042.c: No controller found.
>Serial: 8250/16550 driver $Revision: 1.90 $ 64 ports, IRQ sharing enabled
>Ã¿ttyS0 at MMIO 0xf4050000 (irq = 57) is a 16550A
>GSI 34 (level, low) -> CPU 0 (0x0000) vector 59
>ttyS1 at MMIO 0xff5e0000 (irq = 59) is a 16550A
>ACPI: PCI Interrupt 0000:e0:01.0[A] -> GSI 60 (level, low) -> IRQ 57
>ttyS2 at MMIO 0xf4051000 (irq = 57) is a 16450
>ACPI: PCI Interrupt 0000:e0:01.1[A] -> GSI 60 (level, low) -> IRQ 57
>ttyS3 at MMIO 0xf4050010 (irq = 57) is a 16550A
>ttyS4 at MMIO 0xf4050038 (irq = 57) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>CMD649: IDE controller at PCI slot 0000:00:02.0
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 21 (level, low) -> IRQ 52
>CMD649: chipset revision 2
>CMD649: 100% native mode on irq 52
>    ide0: BM-DMA at 0x0d00-0x0d07, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0x0d08-0x0d0f, BIOS settings: hdc:pio, hdd:pio
>hda: DV-28E-N, ATAPI CD/DVD-ROM drive
>Using cfq io scheduler
>ide0 at 0xd18-0xd1f,0xd26 on irq 52
>hda: ATAPI 61X DVD-ROM drive, 256kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>EFI Variables Facility v0.08 2004-May-17
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 6, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 9, 8388608 bytes)
>TCP bind hash table entries: 524288 (order: 9, 8388608 bytes)
>TCP: Hash tables configured (established 524288 bind 524288)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>RAMDISK: Compressed image found at block 0
>RAMDISK: incomplete write (-28 != 32768) 12582912
>VFS: Cannot open root device "<NULL>" or unknown-block(8,2)
>Please append a correct "root=" boot option
>Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,2)
>
>
>

Actions: View

Attachments on bug 444132: 303767