Attachment 303797 Details for Bug 444169 – dmesg output

dmesg output

dmesg.txt (text/plain), 22.88 KB, created by Dan Beard on 2008-04-25 16:20:31 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dan Beard

Created: 2008-04-25 16:20:31 UTC

Size: 22.88 KB

patch

obsolete

>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 253 pages used for memmap
>  HighMem zone: 32243 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F6C80, 0014 (r0 PTLTD )
>ACPI: RSDT 3FEF88E9, 002C (r1 PTLTD    RSDT    6040000  LTP        0)
>ACPI: FACP 3FEFEF64, 0074 (r1 ALI    M1533     6040000 PTL     F4240)
>ACPI: DSDT 3FEF8915, 664F (r1    ALI    M1533  6040000 MSFT  100000D)
>ACPI: FACS 3FEFFFC0, 0040
>ACPI: BOOT 3FEFEFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>ACPI: DMI detected: Hewlett-Packard
>ACPI: PM-Timer IO Port: 0x8008
>Allocating PCI resources starting at 50000000 (gap: 40000000:bffc0000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259827
>Kernel command line: initrd=initrd0.img root=CDLABEL=Fedora-9-PR-i686-20080416 rootfstype=iso9660 ro quiet liveimg rhgb  BOOT_IMAGE=vmlinuz0 
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffb000 (0180f000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07b8000 soft=c0798000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1999.969 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1028792k/1047488k available (2234k kernel code, 17980k reserved, 1119k data, 284k init, 129984k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074e000 - 0xc0795000   ( 284 kB)
>      .data : 0xc062ea6d - 0xc0746800   (1119 kB)
>      .text : 0xc0400000 - 0xc062ea6d   (2234 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=128, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 4003.45 BogoMIPS (lpj=2001727)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Hyper-Threading is disabled
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 20k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0e20)
>CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3712 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 15:52:33  Date: 04/25/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=3
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:11.0: quirk: region 8000-803f claimed by ali7101 ACPI
>pci 0000:00:11.0: quirk: region 8040-805f claimed by ali7101 SMB
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *9
>ACPI: PCI Interrupt Link [LNKB] (IRQs 7 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7)
>ACPI: PCI Interrupt Link [LNKU] (IRQs *10)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>system 00:07: ioport range 0x3810-0x381f has been reserved
>system 00:07: ioport range 0x4d0-0x4d1 has been reserved
>system 00:07: ioport range 0x8000-0x805f could not be reserved
>system 00:07: ioport range 0x4d6-0x4d6 has been reserved
>system 00:07: ioport range 0x480-0x48f has been reserved
>system 00:07: ioport range 0x40b-0x40b has been reserved
>system 00:07: ioport range 0x8004-0x8005 has been reserved
>system 00:07: ioport range 0xfe00-0xfefe has been reserved
>system 00:07: iomem range 0xfffc0000-0xffffffff could not be reserved
>system 00:07: iomem range 0xfec00000-0xfec00fff has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: 0xe0100000-0xe01fffff
>  PREFETCH window: 0x00000000e8000000-0x00000000efffffff
>PCI: Bus 2, cardbus bridge: 0000:00:0a.0
>  IO window: 0x00002000-0x000020ff
>  IO window: 0x00002400-0x000024ff
>  PREFETCH window: 0x50000000-0x53ffffff
>  MEM window: 0x54000000-0x57ffffff
>PCI: Bus 6, cardbus bridge: 0000:00:0a.1
>  IO window: 0x00002800-0x000028ff
>  IO window: 0x00002c00-0x00002cff
>  PREFETCH window: 0x58000000-0x5bffffff
>  MEM window: 0x5c000000-0x5fffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: Enabling device 0000:00:0a.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKF] -> GSI 5 (level, low) -> IRQ 5
>PCI: Enabling device 0000:00:0a.1 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:0a.1[A] -> Link [LNKF] -> GSI 5 (level, low) -> IRQ 5
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 4404k freed
>Simple Boot Flag at 0x38 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1209138752.730:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:07.0: Activating ISA DMA hang workarounds
>pci 0000:01:00.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (50 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected ALi M1671 chipset
>agpgart: AGP aperture is 128M @ 0xf0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>Yenta: CardBus bridge found at 0000:00:0a.0 [103c:0029]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:0a.0, mfunc 0x01111112, devctl 0x64
>Yenta: ISA IRQ mask 0x0c98, PCI irq 5
>Socket status: 30000006
>Yenta: CardBus bridge found at 0000:00:0a.1 [103c:0029]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:0a.1, mfunc 0x01111112, devctl 0x64
>Yenta: ISA IRQ mask 0x0c98, PCI irq 5
>Socket status: 30000020
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 4:795:892
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 908k
>SCSI subsystem initialized
>Driver 'sr' needs updating - please use bus_type methods
>loop: module loaded
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKU] -> GSI 10 (level, low) -> IRQ 10
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 10, io mem 0xe0000000
>pccard: CardBus card inserted into slot 1
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>Synaptics Touchpad, model: 1, fw: 5.8, id: 0x2348b3, caps: 0x904713/0x10008
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
>libata version 3.00 loaded.
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 ohci_hcd
>usb usb1: SerialNumber: 0000:00:02.0
>PCI: Enabling device 0000:00:0c.0 (0010 -> 0012)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>firewire_ohci: Added fw-ohci device 0000:00:0c.0, OHCI version 1.10
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
>ohci_hcd 0000:00:0f.0: OHCI Host Controller
>ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:0f.0: irq 10, io mem 0xe0008000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 ohci_hcd
>usb usb2: SerialNumber: 0000:00:0f.0
>ACPI: Unable to derive IRQ for device 0000:00:10.0
>ACPI: Unable to derive IRQ for device 0000:00:10.0
>ACPI: Unable to derive IRQ for device 0000:00:10.0
>scsi0 : pata_ali
>scsi1 : pata_ali
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1800 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1808 irq 15
>Marking TSC unstable due to: TSC halts in idle.
>ata1.00: ATA-6: FUJITSU MHT2040AT, 009A, max UDMA/100
>ata1.00: 78140160 sectors, multi 16: LBA 
>ata1.00: limited to UDMA/33 due to 40-wire cable
>ata1.00: configured for UDMA/33
>usb 2-2: new low speed USB device using ohci_hcd and address 2
>firewire_core: created device fw0: GUID 00c09f0000077344, S400
>usb 2-2: configuration #1 chosen from 1 choice
>input: Hewlett-Packard  HP f2100a Optical USB Travel Mouse as /devices/pci0000:00/0000:00:0f.0/usb2/2-2/2-2:1.0/input/input3
>ata2.00: ATAPI: TOSHIBA DVD-ROM SD-R2102, 1916, max MWDMA2
>ata2.00: WARNING: ATAPI DMA disabled for reliablity issues.  It can be enabled
>ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
>ata2.00: simplex DMA is claimed by other device, disabling DMA
>input,hidraw0: USB HID v1.00 Mouse [Hewlett-Packard  HP f2100a Optical USB Travel Mouse] on usb-0000:00:0f.0-2
>usb 2-2: New USB device found, idVendor=03f0, idProduct=2003
>usb 2-2: New USB device strings: Mfr=4, Product=18, SerialNumber=0
>usb 2-2: Product: HP f2100a Optical USB Travel Mouse
>usb 2-2: Manufacturer: Hewlett-Packard 
>ata2.00: configured for PIO4
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHT2040A 009A PQ: 0 ANSI: 5
>scsi 1:0:0:0: CD-ROM            TOSHIBA  DVD-ROM SD-R2102 1916 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>Driver 'sd' needs updating - please use bus_type methods
>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ISO 9660 Extensions: Microsoft Joliet Level 3
>Unable to load NLS charset utf8
>Unable to load NLS charset utf8
>ISO 9660 Extensions: RRIP_1991A
>squashfs: version 3.3 (2007/10/31) Phillip Lougher
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1209138767.043:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux:8192 avtab hash slots allocated. Num of rules:172102
>SELinux:8192 avtab hash slots allocated. Num of rules:172102
>security:  8 users, 12 roles, 2300 types, 115 bools, 1 sens, 1024 cats
>security:  72 classes, 172102 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=11905
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=10972
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=10971
>SELinux: initialized (dev loop2, type squashfs), not configured for labeling
>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1209138768.886:3): policy loaded auid=4294967295 ses=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>PCI: Enabling device 0000:00:11.0 (0000 -> 0001)
>ALi_M1535: initialized. timeout=60 sec (nowayout=0)
>natsemi dp8381x driver, version 2.1, Sept 11, 2006
>  originally by Donald Becker <becker@scyld.com>
>  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>natsemi eth0: NatSemi DP8381[56] at 0xe0009000 (0000:00:12.0), 00:c0:9f:19:9c:d8, IRQ 11, port TP.
>input: PC Speaker as /devices/platform/pcspkr/input/input4
>alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
>alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
>ACPI: Power Button (CM) [PWRB]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7
>ACPI: Lid Switch [LID]
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: AC Adapter [ACAD] (on-line)
>ali15x3_smbus 0000:00:11.0: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
>ali15x3_smbus 0000:00:11.0: ALI15X3 not detected, module not inserted.
>alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
>alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input8
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>PCI: Enabling device 0000:06:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKF] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:06:00.0 to 64
>PCI: Enabling device 0000:00:06.0 (0005 -> 0007)
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
>ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5
>0000:06:00.0 (prism54pci): cannot find firmware (isl3886)
>ACPI: PCI interrupt for device 0000:06:00.0 disabled
>prism54pci: probe of 0000:06:00.0 failed with error -2
>ppdev: user-space parallel port driver
>Loaded prism54 driver, version 1.2
>ALSA sound/pci/ac97/ac97_codec.c:2053: AC'97 1 does not respond - RESET
>ALSA sound/pci/ac97/ac97_codec.c:2062: AC'97 1 access is not valid [0xffffffff], removing mixer.
>ALSA sound/pci/ali5451/ali5451.c:1926: ali mixer 1 creating error.
>ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKF] -> GSI 5 (level, low) -> IRQ 5
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>[drm] Initialized radeon 1.28.0 20060524 on minor 0
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Setting GART location based on new memory map
>[drm] writeback test succeeded in 1 usecs
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>Adding 1076312k swap on /dev/sda5.  Priority:-1 extents:1 across:1076312k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>mtrr: no MTRR for e8000000,2000000 found
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Setting GART location based on new memory map
>[drm] writeback test succeeded in 1 usecs
>eth0: DSPCFG accepted after 0 usec.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth1: resetting device...
>eth1: uploading firmware...
>prism54: request_firmware() failed for 'isl3890'
>eth1: could not upload firmware ('isl3890')
>eth1: islpci_reset: failure
>eth1: resetting device...
>eth1: uploading firmware...
>prism54: request_firmware() failed for 'isl3890'
>eth1: could not upload firmware ('isl3890')
>eth1: islpci_reset: failure
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[fedora@localhost ~]$ 
>

Actions: View

Attachments on bug 444169: 303797