Attachment 304031 Details for Bug 444214 – Output from nm-tool with active eth0 and wlan0

Output from nm-tool with active eth0 and wlan0

nm-tool.txt (text/plain), 1.47 KB, created by Joachim Frieben on 2008-04-28 19:31:18 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Joachim Frieben

Created: 2008-04-28 19:31:18 UTC

Size: 1.47 KB

patch

obsolete

>
>NetworkManager Tool
>
>State: connected
>
>- Device: eth1 ----------------------------------------------------------------
>  Type:              Wired
>  Driver:            tg3
>  State:             unavailable
>  HW Address:        00:XX:XX:XX:XX:XX
>
>  Capabilities:
>    Supported:       yes
>    Carrier Detect:  yes
>
>  Wired Settings
>
>
>- Device: eth0 ----------------------------------------------------------------
>  Type:              Wired
>  Driver:            forcedeth
>  State:             connected
>  HW Address:        00:XX:XX:XX:XX:XX
>
>  Capabilities:
>    Supported:       yes
>    Carrier Detect:  yes
>    Speed:           10 Mb/s
>
>  Wired Settings
>
>  IP Settings:
>    IP Address:      192.168.0.1
>    Subnet Mask:     255.255.255.0
>    Broadcast:       0.0.0.0
>    Gateway:         0.0.0.0
>
>
>- Device: wlan0 ----------------------------------------------------------------
>  Type:              802.11 Wireless
>  Driver:            ath5k_pci
>  State:             connected
>  HW Address:        00:XX:XX:XX:XX:XX
>
>  Capabilities:
>    Supported:       yes
>
>  Wireless Settings
>    WEP Encryption:  yes
>    WPA Encryption:  yes
>    WPA2 Encryption: yes
>
>  Wireless Access Points(* = Current AP)
>    *AP:        Infra, 00:XX:XX:XX:XX:XX, Freq 2432 MHz, Rate 0 Mb/s, Strength 43 WEP
>
>  IP Settings:
>    IP Address:      192.168.1.23
>    Subnet Mask:     255.255.255.0
>    Broadcast:       192.168.1.255
>    Gateway:         192.168.1.1
>    DNS:             82.144.41.8
>    DNS:             192.168.1.1
>
>

Actions: View

Attachments on bug 444214: 304030 | 304031