Attachment 304228 Details for Bug 444726 – dmseg output

dmseg output

dmseg.cpufreq.debug_7 (text/plain), 25.69 KB, created by Radek Liboska on 2008-04-30 13:56:18 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Radek Liboska

Created: 2008-04-30 13:56:18 UTC

Size: 25.69 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.5-85.fc8 (mockbuild@hammer2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sat Apr 19 12:39:34 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
> BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
> BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
> BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f5530
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 524000) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524000
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   524000
>On node 0 totalpages: 524000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2301 pages used for memmap
>  HighMem zone: 292323 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000F6F00, 0014 (r0 GBT   )
>ACPI: RSDT 7FEE3040, 0034 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: FACP 7FEE30C0, 0074 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: DSDT 7FEE3180, 49F4 (r1 GBT    GBTUACPI     1000 MSFT  100000C)
>ACPI: FACS 7FEE0000, 0040
>ACPI: HPET 7FEE7CC0, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU       98)
>ACPI: MCFG 7FEE7D40, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: APIC 7FEE7BC0, 0084 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519907
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb vga=0x31A cpufreq.debug=7 
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07bb000 soft=c079b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1866.711 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2069292k/2096000k available (2238k kernel code, 25412k reserved, 1131k data, 288k init, 1178496k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0750000 - 0xc0798000   ( 288 kB)
>      .data : 0xc062f955 - 0xc074a724   (1131 kB)
>      .text : 0xc0400000 - 0xc062f955   (2238 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 3735.80 BogoMIPS (lpj=1867902)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 CPU          6320  @ 1.86GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07bc000 soft=c079c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3733.35 BogoMIPS (lpj=1866677)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU          6320  @ 1.86GHz stepping 06
>Total of 2 processors activated (7469.15 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>net_namespace: 64 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 13:44:24  Date: 04/30/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xfb650, last bus=5
>PCI: Using configuration type 1
>Setting up standard PCI resources
>mtrr: your CPUs had inconsistent variable MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0x290-0x29f has been reserved
>system 00:01: ioport range 0x800-0x87f has been reserved
>system 00:01: ioport range 0x290-0x294 has been reserved
>system 00:01: ioport range 0x880-0x88f has been reserved
>system 00:0a: ioport range 0x400-0x4bf could not be reserved
>system 00:0b: iomem range 0xe0000000-0xe3ffffff could not be reserved
>system 00:0c: iomem range 0xcde00-0xcffff has been reserved
>system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
>system 00:0c: iomem range 0x7fee0000-0x7fefffff could not be reserved
>system 00:0c: iomem range 0x0-0x9ffff could not be reserved
>system 00:0c: iomem range 0x100000-0x7fedffff could not be reserved
>system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:0c: iomem range 0xfed10000-0xfed1dfff could not be reserved
>system 00:0c: iomem range 0xfed20000-0xfed8ffff could not be reserved
>system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0c: iomem range 0xffb00000-0xffb7ffff could not be reserved
>system 00:0c: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:0c: iomem range 0xe0000-0xeffff has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 8000-8fff
>  MEM window: e4000000-e6ffffff
>  PREFETCH window: c0000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: 7000-7fff
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: 6000-6fff
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: 9000-afff
>  MEM window: e9000000-e90fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: b000-bfff
>  MEM window: e7000000-e8ffffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 3666k freed
>speedstep-lib: x86: 6, model: f
>speedstep-ich: Intel(R) SpeedStep(TM) capable processor not found
>speedstep-lib: x86: 6, model: f
>speedstep-smi: No supported Intel CPU detected.
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1209563064.620:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 9FE6BD62F4CF9C
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 5120k, total 524288k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: protected mode interface info at c000:c2e0
>vesafb: pmi: set display start = c00cc316, set palette = c00cc380
>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 160x64
>fb0: VESA VGA frame buffer device
>ACPI: Processor [CPU0] (supports 2 throttling states)
>ACPI: Processor [CPU1] (supports 2 throttling states)
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 4:305:737
>Freeing unused kernel memory: 288k freed
>Write protecting the kernel read-only data: 894k
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe9105000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xe9104000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 20, io base 0x0000d000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 2-2: new high speed USB device using ehci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000c400
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 2-2: configuration #1 chosen from 1 choice
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000c800
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000cc00
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>PCI: Enabling device 0000:04:00.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:04:00.1 to 64
>ACPI: PCI interrupt for device 0000:04:00.1 disabled
>usb 3-2: new full speed USB device using uhci_hcd and address 3
>usb 3-2: configuration #1 chosen from 1 choice
>usb 7-1: new low speed USB device using uhci_hcd and address 2
>usb 7-1: configuration #1 chosen from 1 choice
>hiddev96hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS CS 500 FW:808.q7.I USB FW:q7] on usb-0000:00:1d.2-1
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>ata1.00: HPA detected: current 488395055, native 488397168
>ata1.00: ATA-7: ST3250620NS, 3.AEG, max UDMA/133
>ata1.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.01: ATAPI: HL-DT-STDVD-RAM GSA-H30N, 1.01, max UDMA/100
>ata1.00: configured for UDMA/133
>ata1.01: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      ST3250620NS      3.AE PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H30N 1.01 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe800 irq 21
>ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xe400 bmdma 0xe808 irq 21
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>ahci 0000:04:00.0: version 3.0
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>scsi4 : ahci
>scsi5 : ahci
>ata5: SATA max UDMA/133 abar m8192@0xe9000000 port 0xe9000100 irq 17
>ata6: SATA max UDMA/133 abar m8192@0xe9000000 port 0xe9000180 irq 17
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1209563079.781:2): selinux=0 auid=4294967295
>Driver 'sr' needs updating - please use bus_type methods
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 0:0:1:0: Attached scsi generic sg1 type 5
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>Initializing USB Mass Storage driver...
>iTCO_vendor_support: vendor-support=0
>scsi6 : SCSI emulation for USB Mass Storage devices
>ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:04:00.1 to 64
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>scsi7 : pata_jmicron
>input: Power Button (FF) as /class/input/input3
>scsi8 : pata_jmicron
>ata7: PATA max UDMA/100 cmd 0x9000 ctl 0x9400 bmdma 0xa000 irq 18
>ata8: PATA max UDMA/100 cmd 0x9800 ctl 0x9c00 bmdma 0xa008 irq 18
>usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0317
>usbcore: registered new interface driver usblp
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>input: PC Speaker as /class/input/input5
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>8139too Fast Ethernet driver 0.9.28
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 21
>eth0: RealTek RTL8139 at 0xf8e3a000, 00:50:fc:2e:bd:7b, IRQ 21
>eth0:  Identified 8139 chip type 'RTL-8139C'
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>Clocksource tsc unstable (delta = 68889403 ns)
>Time: hpet clocksource has been installed.
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>usbcore: registered new interface driver snd-usb-audio
>usb-storage: device scan complete
>scsi 6:0:0:0: Direct-Access     USB2.0   CardReader SD0   0100 PQ: 0 ANSI: 0
>scsi 6:0:0:1: Direct-Access     USB2.0   CardReader SD1   0100 PQ: 0 ANSI: 0
>scsi 6:0:0:2: Direct-Access     USB2.0   CardReader SD2   0100 PQ: 0 ANSI: 0
>sd 6:0:0:0: [sdb] Attached SCSI removable disk
>sd 6:0:0:0: Attached scsi generic sg2 type 0
>sd 6:0:0:1: [sdc] Attached SCSI removable disk
>sd 6:0:0:1: Attached scsi generic sg3 type 0
>sd 6:0:0:2: [sdd] Attached SCSI removable disk
>sd 6:0:0:2: Attached scsi generic sg4 type 0
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol02.  Priority:-1 extents:1 across:2031608k

Actions: View

Attachments on bug 444726: 304228 | 304249