Attachment 304282 Details for Bug 346731 – sec eror realted internal header

sec eror realted internal header

SECerrs.h (text/x-chdr), 20.22 KB, created by Elio Maldonado Batiz on 2008-04-30 23:58:37 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Elio Maldonado Batiz

Created: 2008-04-30 23:58:37 UTC

Size: 20.22 KB

patch

obsolete

>/* ***** BEGIN LICENSE BLOCK *****
> * Version: MPL 1.1/GPL 2.0/LGPL 2.1
> *
> * The contents of this file are subject to the Mozilla Public License Version
> * 1.1 (the "License"); you may not use this file except in compliance with
> * the License. You may obtain a copy of the License at
> * http://www.mozilla.org/MPL/
> *
> * Software distributed under the License is distributed on an "AS IS" basis,
> * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
> * for the specific language governing rights and limitations under the
> * License.
> *
> * The Original Code is the Netscape security libraries.
> *
> * The Initial Developer of the Original Code is
> * Netscape Communications Corporation.
> * Portions created by the Initial Developer are Copyright (C) 1994-2000
> * the Initial Developer. All Rights Reserved.
> *
> * Contributor(s):
> *
> * Alternatively, the contents of this file may be used under the terms of
> * either the GNU General Public License Version 2 or later (the "GPL"), or
> * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
> * in which case the provisions of the GPL or the LGPL are applicable instead
> * of those above. If you wish to allow use of your version of this file only
> * under the terms of either the GPL or the LGPL, and not to allow others to
> * use your version of this file under the terms of the MPL, indicate your
> * decision by deleting the provisions above and replace them with the notice
> * and other provisions required by the GPL or the LGPL. If you do not delete
> * the provisions above, a recipient may use your version of this file under
> * the terms of any one of the MPL, the GPL or the LGPL.
> *
> * ***** END LICENSE BLOCK ***** */
>
>/* General security error codes  */
>/* Caller must #include <secerr.h> */
>
>ER3(SEC_ERROR_IO,				SEC_ERROR_BASE + 0,
>"An I/O error occurred during security authorization.")
>
>ER3(SEC_ERROR_LIBRARY_FAILURE,			SEC_ERROR_BASE + 1,
>"security library failure.")
>
>ER3(SEC_ERROR_BAD_DATA,				SEC_ERROR_BASE + 2,
>"security library: received bad data.")
>
>ER3(SEC_ERROR_OUTPUT_LEN,			SEC_ERROR_BASE + 3,
>"security library: output length error.")
>
>ER3(SEC_ERROR_INPUT_LEN,			SEC_ERROR_BASE + 4,
>"security library has experienced an input length error.")
>
>ER3(SEC_ERROR_INVALID_ARGS,			SEC_ERROR_BASE + 5,
>"security library: invalid arguments.")
>
>ER3(SEC_ERROR_INVALID_ALGORITHM,		SEC_ERROR_BASE + 6,
>"security library: invalid algorithm.")
>
>ER3(SEC_ERROR_INVALID_AVA,			SEC_ERROR_BASE + 7,
>"security library: invalid AVA.")
>
>ER3(SEC_ERROR_INVALID_TIME,			SEC_ERROR_BASE + 8,
>"Improperly formatted time string.")
>
>ER3(SEC_ERROR_BAD_DER,				SEC_ERROR_BASE + 9,
>"security library: improperly formatted DER-encoded message.")
>
>ER3(SEC_ERROR_BAD_SIGNATURE,			SEC_ERROR_BASE + 10,
>"Peer's certificate has an invalid signature.")
>
>ER3(SEC_ERROR_EXPIRED_CERTIFICATE,		SEC_ERROR_BASE + 11,
>"Peer's Certificate has expired.")
>
>ER3(SEC_ERROR_REVOKED_CERTIFICATE,		SEC_ERROR_BASE + 12,
>"Peer's Certificate has been revoked.")
>
>ER3(SEC_ERROR_UNKNOWN_ISSUER,			SEC_ERROR_BASE + 13,
>"Peer's Certificate issuer is not recognized.")
>
>ER3(SEC_ERROR_BAD_KEY,				SEC_ERROR_BASE + 14,
>"Peer's public key is invalid.")
>
>ER3(SEC_ERROR_BAD_PASSWORD,			SEC_ERROR_BASE + 15,
>"The security password entered is incorrect.")
>
>ER3(SEC_ERROR_RETRY_PASSWORD,			SEC_ERROR_BASE + 16,
>"New password entered incorrectly.  Please try again.")
>
>ER3(SEC_ERROR_NO_NODELOCK,			SEC_ERROR_BASE + 17,
>"security library: no nodelock.")
>
>ER3(SEC_ERROR_BAD_DATABASE,			SEC_ERROR_BASE + 18,
>"security library: bad database.")
>
>ER3(SEC_ERROR_NO_MEMORY,			SEC_ERROR_BASE + 19,
>"security library: memory allocation failure.")
>
>ER3(SEC_ERROR_UNTRUSTED_ISSUER,			SEC_ERROR_BASE + 20,
>"Peer's certificate issuer has been marked as not trusted by the user.")
>
>ER3(SEC_ERROR_UNTRUSTED_CERT,			SEC_ERROR_BASE + 21,
>"Peer's certificate has been marked as not trusted by the user.")
>
>ER3(SEC_ERROR_DUPLICATE_CERT,			(SEC_ERROR_BASE + 22),
>"Certificate already exists in your database.")
>
>ER3(SEC_ERROR_DUPLICATE_CERT_NAME,		(SEC_ERROR_BASE + 23),
>"Downloaded certificate's name duplicates one already in your database.")
>
>ER3(SEC_ERROR_ADDING_CERT,			(SEC_ERROR_BASE + 24),
>"Error adding certificate to database.")
>
>ER3(SEC_ERROR_FILING_KEY,			(SEC_ERROR_BASE + 25),
>"Error refiling the key for this certificate.")
>
>ER3(SEC_ERROR_NO_KEY,				(SEC_ERROR_BASE + 26),
>"The private key for this certificate cannot be found in key database")
>
>ER3(SEC_ERROR_CERT_VALID,			(SEC_ERROR_BASE + 27),
>"This certificate is valid.")
>
>ER3(SEC_ERROR_CERT_NOT_VALID,			(SEC_ERROR_BASE + 28),
>"This certificate is not valid.")
>
>ER3(SEC_ERROR_CERT_NO_RESPONSE,			(SEC_ERROR_BASE + 29),
>"Cert Library: No Response")
>
>ER3(SEC_ERROR_EXPIRED_ISSUER_CERTIFICATE,	(SEC_ERROR_BASE + 30),
>"The certificate issuer's certificate has expired.  Check your system date and time.")
>
>ER3(SEC_ERROR_CRL_EXPIRED,			(SEC_ERROR_BASE + 31),
>"The CRL for the certificate's issuer has expired.  Update it or check your system date and time.")
>
>ER3(SEC_ERROR_CRL_BAD_SIGNATURE,		(SEC_ERROR_BASE + 32),
>"The CRL for the certificate's issuer has an invalid signature.")
>
>ER3(SEC_ERROR_CRL_INVALID,			(SEC_ERROR_BASE + 33),
>"New CRL has an invalid format.")
>
>ER3(SEC_ERROR_EXTENSION_VALUE_INVALID,		(SEC_ERROR_BASE + 34),
>"Certificate extension value is invalid.")
>
>ER3(SEC_ERROR_EXTENSION_NOT_FOUND,		(SEC_ERROR_BASE + 35),
>"Certificate extension not found.")
>
>ER3(SEC_ERROR_CA_CERT_INVALID,			(SEC_ERROR_BASE + 36),
>"Issuer certificate is invalid.")
>   
>ER3(SEC_ERROR_PATH_LEN_CONSTRAINT_INVALID,	(SEC_ERROR_BASE + 37),
>"Certificate path length constraint is invalid.")
>
>ER3(SEC_ERROR_CERT_USAGES_INVALID,		(SEC_ERROR_BASE + 38),
>"Certificate usages field is invalid.")
>
>ER3(SEC_INTERNAL_ONLY,				(SEC_ERROR_BASE + 39),
>"**Internal ONLY module**")
>
>ER3(SEC_ERROR_INVALID_KEY,			(SEC_ERROR_BASE + 40),
>"The key does not support the requested operation.")
>
>ER3(SEC_ERROR_UNKNOWN_CRITICAL_EXTENSION,	(SEC_ERROR_BASE + 41),
>"Certificate contains unknown critical extension.")
>
>ER3(SEC_ERROR_OLD_CRL,				(SEC_ERROR_BASE + 42),
>"New CRL is not later than the current one.")
>
>ER3(SEC_ERROR_NO_EMAIL_CERT,			(SEC_ERROR_BASE + 43),
>"Not encrypted or signed: you do not yet have an email certificate.")
>
>ER3(SEC_ERROR_NO_RECIPIENT_CERTS_QUERY,		(SEC_ERROR_BASE + 44),
>"Not encrypted: you do not have certificates for each of the recipients.")
>
>ER3(SEC_ERROR_NOT_A_RECIPIENT,			(SEC_ERROR_BASE + 45),
>"Cannot decrypt: you are not a recipient, or matching certificate and \
>private key not found.")
>
>ER3(SEC_ERROR_PKCS7_KEYALG_MISMATCH,		(SEC_ERROR_BASE + 46),
>"Cannot decrypt: key encryption algorithm does not match your certificate.")
>
>ER3(SEC_ERROR_PKCS7_BAD_SIGNATURE,		(SEC_ERROR_BASE + 47),
>"Signature verification failed: no signer found, too many signers found, \
>or improper or corrupted data.")
>
>ER3(SEC_ERROR_UNSUPPORTED_KEYALG,		(SEC_ERROR_BASE + 48),
>"Unsupported or unknown key algorithm.")
>
>ER3(SEC_ERROR_DECRYPTION_DISALLOWED,		(SEC_ERROR_BASE + 49),
>"Cannot decrypt: encrypted using a disallowed algorithm or key size.")
>
>
>/* Fortezza Alerts */
>ER3(XP_SEC_FORTEZZA_BAD_CARD,			(SEC_ERROR_BASE + 50),
>"Fortezza card has not been properly initialized.  \
>Please remove it and return it to your issuer.")
>
>ER3(XP_SEC_FORTEZZA_NO_CARD,			(SEC_ERROR_BASE + 51),
>"No Fortezza cards Found")
>
>ER3(XP_SEC_FORTEZZA_NONE_SELECTED,		(SEC_ERROR_BASE + 52),
>"No Fortezza card selected")
>
>ER3(XP_SEC_FORTEZZA_MORE_INFO,			(SEC_ERROR_BASE + 53),
>"Please select a personality to get more info on")
>
>ER3(XP_SEC_FORTEZZA_PERSON_NOT_FOUND,		(SEC_ERROR_BASE + 54),
>"Personality not found")
>
>ER3(XP_SEC_FORTEZZA_NO_MORE_INFO,		(SEC_ERROR_BASE + 55),
>"No more information on that Personality")
>
>ER3(XP_SEC_FORTEZZA_BAD_PIN,			(SEC_ERROR_BASE + 56),
>"Invalid Pin")
>
>ER3(XP_SEC_FORTEZZA_PERSON_ERROR,		(SEC_ERROR_BASE + 57),
>"Couldn't initialize Fortezza personalities.")
>/* end fortezza alerts. */
>
>ER3(SEC_ERROR_NO_KRL,				(SEC_ERROR_BASE + 58),
>"No KRL for this site's certificate has been found.")
>
>ER3(SEC_ERROR_KRL_EXPIRED,			(SEC_ERROR_BASE + 59),
>"The KRL for this site's certificate has expired.")
>
>ER3(SEC_ERROR_KRL_BAD_SIGNATURE,		(SEC_ERROR_BASE + 60),
>"The KRL for this site's certificate has an invalid signature.")
>
>ER3(SEC_ERROR_REVOKED_KEY,			(SEC_ERROR_BASE + 61),
>"The key for this site's certificate has been revoked.")
>
>ER3(SEC_ERROR_KRL_INVALID,			(SEC_ERROR_BASE + 62),
>"New KRL has an invalid format.")
>
>ER3(SEC_ERROR_NEED_RANDOM,			(SEC_ERROR_BASE + 63),
>"security library: need random data.")
>
>ER3(SEC_ERROR_NO_MODULE,			(SEC_ERROR_BASE + 64),
>"security library: no security module can perform the requested operation.")
>
>ER3(SEC_ERROR_NO_TOKEN,				(SEC_ERROR_BASE + 65),
>"The security card or token does not exist, needs to be initialized, or has been removed.")
>
>ER3(SEC_ERROR_READ_ONLY,			(SEC_ERROR_BASE + 66),
>"security library: read-only database.")
>
>ER3(SEC_ERROR_NO_SLOT_SELECTED,			(SEC_ERROR_BASE + 67),
>"No slot or token was selected.")
>
>ER3(SEC_ERROR_CERT_NICKNAME_COLLISION,		(SEC_ERROR_BASE + 68),
>"A certificate with the same nickname already exists.")
>
>ER3(SEC_ERROR_KEY_NICKNAME_COLLISION,		(SEC_ERROR_BASE + 69),
>"A key with the same nickname already exists.")
>
>ER3(SEC_ERROR_SAFE_NOT_CREATED,			(SEC_ERROR_BASE + 70),
>"error while creating safe object")
>
>ER3(SEC_ERROR_BAGGAGE_NOT_CREATED,		(SEC_ERROR_BASE + 71),
>"error while creating baggage object")
>
>ER3(XP_JAVA_REMOVE_PRINCIPAL_ERROR,		(SEC_ERROR_BASE + 72),
>"Couldn't remove the principal")
>
>ER3(XP_JAVA_DELETE_PRIVILEGE_ERROR,		(SEC_ERROR_BASE + 73),
>"Couldn't delete the privilege")
>
>ER3(XP_JAVA_CERT_NOT_EXISTS_ERROR,		(SEC_ERROR_BASE + 74),
>"This principal doesn't have a certificate")
>
>ER3(SEC_ERROR_BAD_EXPORT_ALGORITHM,		(SEC_ERROR_BASE + 75),
>"Required algorithm is not allowed.")
>
>ER3(SEC_ERROR_EXPORTING_CERTIFICATES,		(SEC_ERROR_BASE + 76),
>"Error attempting to export certificates.")
>
>ER3(SEC_ERROR_IMPORTING_CERTIFICATES,		(SEC_ERROR_BASE + 77),
>"Error attempting to import certificates.")
>
>ER3(SEC_ERROR_PKCS12_DECODING_PFX,		(SEC_ERROR_BASE + 78),
>"Unable to import.  Decoding error.  File not valid.")
>
>ER3(SEC_ERROR_PKCS12_INVALID_MAC,		(SEC_ERROR_BASE + 79),
>"Unable to import.  Invalid MAC.  Incorrect password or corrupt file.")
>
>ER3(SEC_ERROR_PKCS12_UNSUPPORTED_MAC_ALGORITHM,	(SEC_ERROR_BASE + 80),
>"Unable to import.  MAC algorithm not supported.")
>
>ER3(SEC_ERROR_PKCS12_UNSUPPORTED_TRANSPORT_MODE,(SEC_ERROR_BASE + 81),
>"Unable to import.  Only password integrity and privacy modes supported.")
>
>ER3(SEC_ERROR_PKCS12_CORRUPT_PFX_STRUCTURE,	(SEC_ERROR_BASE + 82),
>"Unable to import.  File structure is corrupt.")
>
>ER3(SEC_ERROR_PKCS12_UNSUPPORTED_PBE_ALGORITHM, (SEC_ERROR_BASE + 83),
>"Unable to import.  Encryption algorithm not supported.")
>
>ER3(SEC_ERROR_PKCS12_UNSUPPORTED_VERSION,	(SEC_ERROR_BASE + 84),
>"Unable to import.  File version not supported.")
>
>ER3(SEC_ERROR_PKCS12_PRIVACY_PASSWORD_INCORRECT,(SEC_ERROR_BASE + 85),
>"Unable to import.  Incorrect privacy password.")
>
>ER3(SEC_ERROR_PKCS12_CERT_COLLISION,		(SEC_ERROR_BASE + 86),
>"Unable to import.  Same nickname already exists in database.")
>
>ER3(SEC_ERROR_USER_CANCELLED,			(SEC_ERROR_BASE + 87),
>"The user pressed cancel.")
>
>ER3(SEC_ERROR_PKCS12_DUPLICATE_DATA,		(SEC_ERROR_BASE + 88),
>"Not imported, already in database.")
>
>ER3(SEC_ERROR_MESSAGE_SEND_ABORTED,		(SEC_ERROR_BASE + 89),
>"Message not sent.")
>
>ER3(SEC_ERROR_INADEQUATE_KEY_USAGE,		(SEC_ERROR_BASE + 90),
>"Certificate key usage inadequate for attempted operation.")
>
>ER3(SEC_ERROR_INADEQUATE_CERT_TYPE,		(SEC_ERROR_BASE + 91),
>"Certificate type not approved for application.")
>
>ER3(SEC_ERROR_CERT_ADDR_MISMATCH,		(SEC_ERROR_BASE + 92),
>"Address in signing certificate does not match address in message headers.")
>
>ER3(SEC_ERROR_PKCS12_UNABLE_TO_IMPORT_KEY,	(SEC_ERROR_BASE + 93),
>"Unable to import.  Error attempting to import private key.")
>
>ER3(SEC_ERROR_PKCS12_IMPORTING_CERT_CHAIN,	(SEC_ERROR_BASE + 94),
>"Unable to import.  Error attempting to import certificate chain.")
>
>ER3(SEC_ERROR_PKCS12_UNABLE_TO_LOCATE_OBJECT_BY_NAME, (SEC_ERROR_BASE + 95),
>"Unable to export.  Unable to locate certificate or key by nickname.")
>
>ER3(SEC_ERROR_PKCS12_UNABLE_TO_EXPORT_KEY,	(SEC_ERROR_BASE + 96),
>"Unable to export.  Private Key could not be located and exported.")
>
>ER3(SEC_ERROR_PKCS12_UNABLE_TO_WRITE, 		(SEC_ERROR_BASE + 97),
>"Unable to export.  Unable to write the export file.")
>
>ER3(SEC_ERROR_PKCS12_UNABLE_TO_READ,		(SEC_ERROR_BASE + 98),
>"Unable to import.  Unable to read the import file.")
>
>ER3(SEC_ERROR_PKCS12_KEY_DATABASE_NOT_INITIALIZED, (SEC_ERROR_BASE + 99),
>"Unable to export.  Key database corrupt or deleted.")
>
>ER3(SEC_ERROR_KEYGEN_FAIL,			(SEC_ERROR_BASE + 100),
>"Unable to generate public/private key pair.")
>
>ER3(SEC_ERROR_INVALID_PASSWORD,			(SEC_ERROR_BASE + 101),
>"Password entered is invalid.  Please pick a different one.")
>
>ER3(SEC_ERROR_RETRY_OLD_PASSWORD,		(SEC_ERROR_BASE + 102),
>"Old password entered incorrectly.  Please try again.")
>
>ER3(SEC_ERROR_BAD_NICKNAME,			(SEC_ERROR_BASE + 103),
>"Certificate nickname already in use.")
>
>ER3(SEC_ERROR_NOT_FORTEZZA_ISSUER,       	(SEC_ERROR_BASE + 104),
>"Peer FORTEZZA chain has a non-FORTEZZA Certificate.")
>
>ER3(SEC_ERROR_CANNOT_MOVE_SENSITIVE_KEY, 	(SEC_ERROR_BASE + 105),
>"A sensitive key cannot be moved to the slot where it is needed.")
>
>ER3(SEC_ERROR_JS_INVALID_MODULE_NAME, 		(SEC_ERROR_BASE + 106),
>"Invalid module name.")
>
>ER3(SEC_ERROR_JS_INVALID_DLL, 			(SEC_ERROR_BASE + 107),
>"Invalid module path/filename")
>
>ER3(SEC_ERROR_JS_ADD_MOD_FAILURE, 		(SEC_ERROR_BASE + 108),
>"Unable to add module")
>
>ER3(SEC_ERROR_JS_DEL_MOD_FAILURE, 		(SEC_ERROR_BASE + 109),
>"Unable to delete module")
>
>ER3(SEC_ERROR_OLD_KRL,	     			(SEC_ERROR_BASE + 110),
>"New KRL is not later than the current one.")
> 
>ER3(SEC_ERROR_CKL_CONFLICT,	     		(SEC_ERROR_BASE + 111),
>"New CKL has different issuer than current CKL.  Delete current CKL.")
>
>ER3(SEC_ERROR_CERT_NOT_IN_NAME_SPACE, 		(SEC_ERROR_BASE + 112),
>"The Certifying Authority for this certificate is not permitted to issue a \
>certificate with this name.")
>
>ER3(SEC_ERROR_KRL_NOT_YET_VALID,		(SEC_ERROR_BASE + 113),
>"The key revocation list for this certificate is not yet valid.")
>
>ER3(SEC_ERROR_CRL_NOT_YET_VALID,		(SEC_ERROR_BASE + 114),
>"The certificate revocation list for this certificate is not yet valid.")
>
>ER3(SEC_ERROR_UNKNOWN_CERT,			(SEC_ERROR_BASE + 115),
>"The requested certificate could not be found.")
>
>ER3(SEC_ERROR_UNKNOWN_SIGNER,			(SEC_ERROR_BASE + 116),
>"The signer's certificate could not be found.")
>
>ER3(SEC_ERROR_CERT_BAD_ACCESS_LOCATION,		(SEC_ERROR_BASE + 117),
>"The location for the certificate status server has invalid format.")
>
>ER3(SEC_ERROR_OCSP_UNKNOWN_RESPONSE_TYPE,	(SEC_ERROR_BASE + 118),
>"The OCSP response cannot be fully decoded; it is of an unknown type.")
>
>ER3(SEC_ERROR_OCSP_BAD_HTTP_RESPONSE,		(SEC_ERROR_BASE + 119),
>"The OCSP server returned unexpected/invalid HTTP data.")
>
>ER3(SEC_ERROR_OCSP_MALFORMED_REQUEST,		(SEC_ERROR_BASE + 120),
>"The OCSP server found the request to be corrupted or improperly formed.")
>
>ER3(SEC_ERROR_OCSP_SERVER_ERROR,		(SEC_ERROR_BASE + 121),
>"The OCSP server experienced an internal error.")
>
>ER3(SEC_ERROR_OCSP_TRY_SERVER_LATER,		(SEC_ERROR_BASE + 122),
>"The OCSP server suggests trying again later.")
>
>ER3(SEC_ERROR_OCSP_REQUEST_NEEDS_SIG,		(SEC_ERROR_BASE + 123),
>"The OCSP server requires a signature on this request.")
>
>ER3(SEC_ERROR_OCSP_UNAUTHORIZED_REQUEST,	(SEC_ERROR_BASE + 124),
>"The OCSP server has refused this request as unauthorized.")
>
>ER3(SEC_ERROR_OCSP_UNKNOWN_RESPONSE_STATUS,	(SEC_ERROR_BASE + 125),
>"The OCSP server returned an unrecognizable status.")
>
>ER3(SEC_ERROR_OCSP_UNKNOWN_CERT,		(SEC_ERROR_BASE + 126),
>"The OCSP server has no status for the certificate.")
>
>ER3(SEC_ERROR_OCSP_NOT_ENABLED,			(SEC_ERROR_BASE + 127),
>"You must enable OCSP before performing this operation.")
>
>ER3(SEC_ERROR_OCSP_NO_DEFAULT_RESPONDER,	(SEC_ERROR_BASE + 128),
>"You must set the OCSP default responder before performing this operation.")
>
>ER3(SEC_ERROR_OCSP_MALFORMED_RESPONSE,		(SEC_ERROR_BASE + 129),
>"The response from the OCSP server was corrupted or improperly formed.")
>
>ER3(SEC_ERROR_OCSP_UNAUTHORIZED_RESPONSE,	(SEC_ERROR_BASE + 130),
>"The signer of the OCSP response is not authorized to give status for \
>this certificate.")
>
>ER3(SEC_ERROR_OCSP_FUTURE_RESPONSE,		(SEC_ERROR_BASE + 131),
>"The OCSP response is not yet valid (contains a date in the future).")
>
>ER3(SEC_ERROR_OCSP_OLD_RESPONSE,		(SEC_ERROR_BASE + 132),
>"The OCSP response contains out-of-date information.")
>
>ER3(SEC_ERROR_DIGEST_NOT_FOUND,			(SEC_ERROR_BASE + 133),
>"The CMS or PKCS #7 Digest was not found in signed message.")
>
>ER3(SEC_ERROR_UNSUPPORTED_MESSAGE_TYPE,		(SEC_ERROR_BASE + 134),
>"The CMS or PKCS #7 Message type is unsupported.")
>
>ER3(SEC_ERROR_MODULE_STUCK,			(SEC_ERROR_BASE + 135),
>"PKCS #11 module could not be removed because it is still in use.")
>
>ER3(SEC_ERROR_BAD_TEMPLATE,			(SEC_ERROR_BASE + 136),
>"Could not decode ASN.1 data. Specified template was invalid.")
>
>ER3(SEC_ERROR_CRL_NOT_FOUND,			(SEC_ERROR_BASE + 137),
>"No matching CRL was found.")
>
>ER3(SEC_ERROR_REUSED_ISSUER_AND_SERIAL,        (SEC_ERROR_BASE + 138),
>"You are attempting to import a cert with the same issuer/serial as \
>an existing cert, but that is not the same cert.")
>
>ER3(SEC_ERROR_BUSY,				(SEC_ERROR_BASE + 139),
>"NSS could not shutdown. Objects are still in use.")
>
>ER3(SEC_ERROR_EXTRA_INPUT,			(SEC_ERROR_BASE + 140),
>"DER-encoded message contained extra unused data.")
>
>ER3(SEC_ERROR_UNSUPPORTED_ELLIPTIC_CURVE,	(SEC_ERROR_BASE + 141),
>"Unsupported elliptic curve.")
>
>ER3(SEC_ERROR_UNSUPPORTED_EC_POINT_FORM,	(SEC_ERROR_BASE + 142),
>"Unsupported elliptic curve point form.")
>
>ER3(SEC_ERROR_UNRECOGNIZED_OID,			(SEC_ERROR_BASE + 143),
>"Unrecognized Object Identifier.")
>
>ER3(SEC_ERROR_OCSP_INVALID_SIGNING_CERT,	(SEC_ERROR_BASE + 144),
>"Invalid OCSP signing certificate in OCSP response.")
>
>ER3(SEC_ERROR_REVOKED_CERTIFICATE_CRL,          (SEC_ERROR_BASE + 145),
>"Certificate is revoked in issuer's certificate revocation list.")
>
>ER3(SEC_ERROR_REVOKED_CERTIFICATE_OCSP,         (SEC_ERROR_BASE + 146),
>"Issuer's OCSP responder reports certificate is revoked.")
>
>ER3(SEC_ERROR_CRL_INVALID_VERSION,              (SEC_ERROR_BASE + 147),
>"Issuer's Certificate Revocation List has an unknown version number.")
>
>ER3(SEC_ERROR_CRL_V1_CRITICAL_EXTENSION,        (SEC_ERROR_BASE + 148),
>"Issuer's V1 Certificate Revocation List has a critical extension.")
>
>ER3(SEC_ERROR_CRL_UNKNOWN_CRITICAL_EXTENSION,   (SEC_ERROR_BASE + 149),
>"Issuer's V2 Certificate Revocation List has an unknown critical extension.")
>
>ER3(SEC_ERROR_UNKNOWN_OBJECT_TYPE,	        (SEC_ERROR_BASE + 150),
>"Unknown object type specified.")
>
>ER3(SEC_ERROR_INCOMPATIBLE_PKCS11,	        (SEC_ERROR_BASE + 151),
>"PKCS #11 driver violates the spec in an incompatible way.")
>
>ER3(SEC_ERROR_NO_EVENT,	        		(SEC_ERROR_BASE + 152),
>"No new slot event is available at this time.")
>
>ER3(SEC_ERROR_CRL_ALREADY_EXISTS,      		(SEC_ERROR_BASE + 153),
>"CRL already exists.")
>
>ER3(SEC_ERROR_NOT_INITIALIZED,      		(SEC_ERROR_BASE + 154),
>"NSS is not initialized.")
>
>ER3(SEC_ERROR_TOKEN_NOT_LOGGED_IN,  		(SEC_ERROR_BASE + 155),
>"The operation failed because the PKCS#11 token is not logged in.")
>
>ER3(SEC_ERROR_OCSP_RESPONDER_CERT_INVALID,  	(SEC_ERROR_BASE + 156),
>"Configured OCSP responder's certificate is invalid.")
>
>ER3(SEC_ERROR_OCSP_BAD_SIGNATURE,      		(SEC_ERROR_BASE + 157),
>"OCSP response has an invalid signature.")
>
>ER3(SEC_ERROR_OUT_OF_SEARCH_LIMITS,      		(SEC_ERROR_BASE + 158),
>"Cert validation search is out of search limits")
>
>ER3(SEC_ERROR_INVALID_POLICY_MAPPING,      		(SEC_ERROR_BASE + 159),
>"Policy mapping contains anypolicy")
>
>ER3(SEC_ERROR_POLICY_VALIDATION_FAILED,    		(SEC_ERROR_BASE + 160),
>"Cert chain fails policy validation")
>
>ER3(SEC_ERROR_UNKNOWN_AIA_LOCATION_TYPE,    		(SEC_ERROR_BASE + 161),
>"Unknown location type in cert AIA extension")
>
>ER3(SEC_ERROR_BAD_HTTP_RESPONSE,    		(SEC_ERROR_BASE + 162),
>"Server returned bad HTTP response")
>
>ER3(SEC_ERROR_BAD_LDAP_RESPONSE,    		(SEC_ERROR_BASE + 163),
>"Server returned bad LDAP response")
>
>ER3(SEC_ERROR_FAILED_TO_ENCODE_DATA,    		(SEC_ERROR_BASE + 164),
>"Failed to encode data with ASN1 encoder")
>
>ER3(SEC_ERROR_BAD_INFO_ACCESS_LOCATION,    		(SEC_ERROR_BASE + 165),
>"Bad information access location in cert extension")
>
>ER3(SEC_ERROR_LIBPKIX_INTERNAL,      		(SEC_ERROR_BASE + 166),
>"Libpkix internal error occured during cert validation.")

Actions: View

Attachments on bug 346731: 299417 | 299418 | 299429 | 299430 | 299432 | 304057 | 304280 | 304281 | 304282 | 304284 | 304285 | 304286 | 304287 | 304288 | 304289 | 304290 | 305047 | 305048 | 308356 | 320816 | 320817 | 320818 | 320819 | 320820 | 320821 | 320822 | 320823 | 321049 | 321051 | 321681 | 321682 | 321683 | 321684