Attachment 304355 Details for Bug 443451 – dmesg from f9 rescue console in chroot

dmesg from f9 rescue console in chroot

dmesg.f9grubfail (text/plain), 44.28 KB, created by Gerry Reno on 2008-05-02 02:38:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gerry Reno

Created: 2008-05-02 02:38:54 UTC

Size: 44.28 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-0.234.rc9.git1.fc9.i586 (mockbuild@) (gcc version 4.3.0 20080404 (Red Hat 4.3.0-6) (GCC) ) #1 SMP Tue Apr 15 17:24:08 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000098800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
> BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
> BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
> BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>Warning only 4GB will be used.
>Use a HIGHMEM64G enabled kernel.
>3200MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>found SMP MP-table at [c00f56e0] 000f56e0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->  1048576
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->  1048576
>On node 0 totalpages: 1048576
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 6400 pages used for memmap
>  HighMem zone: 812800 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000F70D0, 0014 (r0 GBT   )
>ACPI: RSDT CFEE3000, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: FACP CFEE3040, 0074 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: DSDT CFEE30C0, 66F8 (r1 GBT    GBTUACPI     1000 MSFT  3000000)
>ACPI: FACS CFEE0000, 0040
>ACPI: SSDT CFEE9880, 0544 (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: HPET CFEE9E00, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU       98)
>ACPI: MCFG CFEE9E40, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ACPI: APIC CFEE97C0, 0084 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 0:2 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 0:2 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>Processor #2 0:2 APIC version 16
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>Processor #3 0:2 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at d0000000 (gap: cff00000:10100000)
>PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1040384
>Kernel command line: initrd=initrd.img rescue BOOT_IMAGE=vmlinuz 
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07b9000 soft=c0799000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2511.567 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 3357784k/4194304k available (2238k kernel code, 47676k reserved, 1119k data, 284k init, 2489216k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc52000 - 0xfffff000   (3764 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074f000 - 0xc0796000   ( 284 kB)
>      .data : 0xc062f838 - 0xc0747800   (1119 kB)
>      .text : 0xc0400000 - 0xc062f838   (2238 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 5025.86 BogoMIPS (lpj=2512930)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0(4) -> Core 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20070126
>CPU0: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
>Booting processor 1/1 ip 4000
>CPU 1 irqstacks, hard=c07ba000 soft=c079a000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5022.85 BogoMIPS (lpj=2511428)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1(4) -> Core 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
>Booting processor 2/2 ip 4000
>CPU 2 irqstacks, hard=c07bb000 soft=c079b000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5022.85 BogoMIPS (lpj=2511429)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 2(4) -> Core 3
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#2.
>CPU2: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
>Booting processor 3/3 ip 4000
>CPU 3 irqstacks, hard=c07bc000 soft=c079c000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5022.85 BogoMIPS (lpj=2511426)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 3(4) -> Core 2
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#3.
>CPU3: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
>Total of 4 processors activated (20094.42 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 4 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3712 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0000000f
>  groups: 00000001 00000002 00000004 00000008
>CPU1 attaching sched-domain:
> domain 0: span 0000000f
>  groups: 00000002 00000004 00000008 00000001
>CPU2 attaching sched-domain:
> domain 0: span 0000000f
>  groups: 00000004 00000008 00000001 00000002
>CPU3 attaching sched-domain:
> domain 0: span 0000000f
>  groups: 00000008 00000001 00000002 00000004
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 21:04:21  Date: 05/01/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
> 00:0c: mem resource (0xe0000000-0xefffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
> 00:0d: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
> 00:0d: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
> 00:0d: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
> 00:0d: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 3 of device 0000:00:00.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 32-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 2
>Switched to high resolution mode on CPU 3
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0x220-0x225 has been reserved
>system 00:01: ioport range 0x290-0x294 has been reserved
>system 00:02: ioport range 0x4100-0x411f has been reserved
>system 00:02: ioport range 0x228-0x22f has been reserved
>system 00:02: ioport range 0x40b-0x40b has been reserved
>system 00:02: ioport range 0x4d6-0x4d6 has been reserved
>system 00:02: ioport range 0xc00-0xc01 has been reserved
>system 00:02: ioport range 0xc14-0xc14 has been reserved
>system 00:02: ioport range 0xc50-0xc52 has been reserved
>system 00:02: ioport range 0xc6c-0xc6d has been reserved
>system 00:02: ioport range 0xc6f-0xc6f has been reserved
>system 00:02: ioport range 0xcd0-0xcd1 has been reserved
>system 00:02: ioport range 0xcd2-0xcd3 has been reserved
>system 00:02: ioport range 0xcd4-0xcdf has been reserved
>system 00:02: ioport range 0x4000-0x40fe has been reserved
>system 00:02: ioport range 0x4210-0x4217 has been reserved
>system 00:02: ioport range 0xb00-0xb1f could not be reserved
>system 00:02: ioport range 0x238-0x23f has been reserved
>system 00:0d: iomem range 0xdf000-0xdffff has been reserved
>system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
>system 00:0d: iomem range 0xcfee0000-0xcfefffff could not be reserved
>system 00:0d: iomem range 0x0-0x9ffff could not be reserved
>system 00:0d: iomem range 0x100000-0xcfedffff could not be reserved
>PCI: Bridge: 0000:00:02.0
>  IO window: b000-bfff
>  MEM window: 0xfa000000-0xfcffffff
>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
>PCI: Bridge: 0000:00:05.0
>  IO window: a000-afff
>  MEM window: 0xfde00000-0xfdffffff
>  PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff
>PCI: Bridge: 0000:00:07.0
>  IO window: e000-efff
>  MEM window: 0xfdc00000-0xfdcfffff
>  PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff
>PCI: Bridge: 0000:00:09.0
>  IO window: d000-dfff
>  MEM window: 0xfda00000-0xfdafffff
>  PREFETCH window: 0x00000000fd900000-0x00000000fd9fffff
>PCI: Bridge: 0000:00:0a.0
>  IO window: c000-cfff
>  MEM window: 0xfd800000-0xfd8fffff
>  PREFETCH window: 0x00000000fd700000-0x00000000fd7fffff
>PCI: Bridge: 0000:00:14.4
>  IO window: 9000-9fff
>  MEM window: 0xfd600000-0xfd6fffff
>  PREFETCH window: 0x00000000fd500000-0x00000000fd5fffff
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 9373k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1209675860.756:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:07.0:pcie00]
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:09.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0a.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: ACPI0007:02 is registered as cooling_device2
>ACPI: ACPI0007:03 is registered as cooling_device3
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 8:807:94
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 908k
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>loop: module loaded
>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
>floppy0: no floppy controllers found
>BIOS EDD facility v0.16 2004-Jun-25, 9 devices found
>input: PC Speaker as /devices/platform/pcspkr/input/input3
>squashfs: version 3.3 (2007/10/31) Phillip Lougher
>SCSI subsystem initialized
>Loading iSCSI transport class v2.0-869.
>iscsi: registered transport (tcp)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>libata version 3.00 loaded.
>sata_mv 0000:02:00.0: version 1.20
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>sata_mv: Highpoint RocketRAID BIOS CORRUPTS DATA on all attached drives, regardless of if/how they are configured. BEWARE!
>sata_mv: For data safety, do not use sectors 8-9 on "Legacy" drives, and avoid the final two gigabytes on all RocketRAID BIOS initialized drives.
>sata_mv 0000:02:00.0: Applying 60X1C0 workarounds to unknown rev
>sata_mv 0000:02:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>scsi0 : sata_mv
>scsi1 : sata_mv
>scsi2 : sata_mv
>scsi3 : sata_mv
>ata1: SATA max UDMA/133 mmio m1048576@0xfde00000 port 0xfde22000 irq 17
>ata2: SATA max UDMA/133 mmio m1048576@0xfde00000 port 0xfde24000 irq 17
>ata3: SATA max UDMA/133 mmio m1048576@0xfde00000 port 0xfde26000 irq 17
>ata4: SATA max UDMA/133 mmio m1048576@0xfde00000 port 0xfde28000 irq 17
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: Hitachi HDP725025GLA380, GM2OA50E, max UDMA/133
>ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-8: Hitachi HDP725025GLA380, GM2OA50E, max UDMA/133
>ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata2.00: configured for UDMA/133
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-8: Hitachi HDP725025GLA380, GM2OA50E, max UDMA/133
>ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata3.00: configured for UDMA/133
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDP72502 GM2O PQ: 0 ANSI: 5
>scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDP72502 GM2O PQ: 0 ANSI: 5
>scsi 2:0:0:0: Direct-Access     ATA      Hitachi HDP72502 GM2O PQ: 0 ANSI: 5
>ahci 0000:00:12.0: version 3.0
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
>ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP
>Driver 'sd' needs updating - please use bus_type methods
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 1:0:0:0: [sdb] Attached SCSI disk
>sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 2:0:0:0: [sdc] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part 
>scsi4 : ahci
>scsi5 : ahci
>scsi6 : ahci
>scsi7 : ahci
>ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
>ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
>ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
>ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
>ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5.00: HPA detected: current 488395055, native 488397168
>ata5.00: ATA-8: Hitachi HDP725025GLA380, GM2OA50E, max UDMA/133
>ata5.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata5.00: configured for UDMA/133
>ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata6.00: ATA-7: Hitachi HDT725050VLA360, V56OA7EA, max UDMA/133
>ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata6.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata6.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata6.00: configured for UDMA/133
>ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata7.00: HPA detected: current 488395055, native 488397168
>ata7.00: ATA-8: Hitachi HDP725025GLA380, GM2OA50E, max UDMA/133
>ata7.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata7.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata7.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata7.00: configured for UDMA/133
>ata8: SATA link down (SStatus 0 SControl 300)
>scsi 4:0:0:0: Direct-Access     ATA      Hitachi HDP72502 GM2O PQ: 0 ANSI: 5
>sd 4:0:0:0: [sdd] 488395055 512-byte hardware sectors (250058 MB)
>sd 4:0:0:0: [sdd] Write Protect is off
>sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sdd] 488395055 512-byte hardware sectors (250058 MB)
>sd 4:0:0:0: [sdd] Write Protect is off
>sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1
>sd 4:0:0:0: [sdd] Attached SCSI disk
>sd 4:0:0:0: Attached scsi generic sg3 type 0
>scsi 5:0:0:0: Direct-Access     ATA      Hitachi HDT72505 V56O PQ: 0 ANSI: 5
>sd 5:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB)
>sd 5:0:0:0: [sde] Write Protect is off
>sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 5:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB)
>sd 5:0:0:0: [sde] Write Protect is off
>sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sde: sde1 sde2 sde3
>sd 5:0:0:0: [sde] Attached SCSI disk
>sd 5:0:0:0: Attached scsi generic sg4 type 0
>scsi 6:0:0:0: Direct-Access     ATA      Hitachi HDP72502 GM2O PQ: 0 ANSI: 5
>sd 6:0:0:0: [sdf] 488395055 512-byte hardware sectors (250058 MB)
>sd 6:0:0:0: [sdf] Write Protect is off
>sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00
>sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 6:0:0:0: [sdf] 488395055 512-byte hardware sectors (250058 MB)
>sd 6:0:0:0: [sdf] Write Protect is off
>sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00
>sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdf: sdf1
>sd 6:0:0:0: [sdf] Attached SCSI disk
>sd 6:0:0:0: Attached scsi generic sg5 type 0
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i586 ohci_hcd
>usb usb1: SerialNumber: 0000:00:13.0
>ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i586 ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.1
>ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using ohci_hcd and address 2
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i586 ohci_hcd
>usb usb3: SerialNumber: 0000:00:13.2
>ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i586 ohci_hcd
>usb usb4: SerialNumber: 0000:00:13.3
>ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-1: New USB device found, idVendor=0930, idProduct=6540
>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-1: Product: USB Flash Memory
>usb 1-1: SerialNumber: 0B11FA6131E118DC
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: OHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i586 ohci_hcd
>usb usb5: SerialNumber: 0000:00:13.4
>PCI: Enabling device 0000:04:00.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:04:00.1 to 64
>scsi8 : pata_jmicron
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>eth0: RTL8168b/8111b at 0xf88cc000, 00:1a:4d:5e:f6:36, XID 38000000 IRQ 218
>scsi9 : pata_jmicron
>ata9: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 18
>ata10: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 18
>Initializing USB Mass Storage driver...
>scsi10 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PCI: Enabling device 0000:05:00.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:05:00.1 to 64
>scsi11 : pata_jmicron
>scsi12 : pata_jmicron
>ata11: PATA max UDMA/100 cmd 0xcf00 ctl 0xce00 bmdma 0xcb00 irq 19
>ata12: PATA max UDMA/100 cmd 0xcd00 ctl 0xcc00 bmdma 0xcb08 irq 19
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
>scsi13 : pata_atiixp
>scsi14 : pata_atiixp
>ata13: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
>ata14: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
>ata13.00: ATAPI: LITE-ON DVDRW LH-20A1H, LL07, max UDMA/66
>ata13.00: limited to UDMA/33 due to 40-wire cable
>ata13.00: configured for UDMA/33
>scsi 13:0:0:0: CD-ROM            LITE-ON  DVDRW LH-20A1H   LL07 PQ: 0 ANSI: 5
>scsi 13:0:0:0: Attached scsi generic sg6 type 5
>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:13.5: debug port 1
>ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 10 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: EHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i586 ehci_hcd
>usb usb6: SerialNumber: 0000:00:13.5
>ACPI: PCI Interrupt 0000:06:0e.0[A] -> GSI 22 (level, low) -> IRQ 22
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>firewire_ohci: Added fw-ohci device 0000:06:0e.0, OHCI version 1.10
>usb 6-1: new high speed USB device using ehci_hcd and address 2
>usb 6-1: configuration #1 chosen from 1 choice
>scsi15 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usb 6-1: New USB device found, idVendor=0930, idProduct=6540
>usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 6-1: Product: USB Flash Memory
>usb 6-1: SerialNumber: 0B11FA6131E118DC
>usb 1-1: USB disconnect, address 2
>firewire_core: created device fw0: GUID 00ce110600001a4d, S400
>ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>scsi16 : ahci
>scsi17 : ahci
>ata15: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 17
>ata16: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 17
>ata15: SATA link down (SStatus 0 SControl 300)
>ata16: SATA link down (SStatus 0 SControl 300)
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>scsi18 : ahci
>scsi19 : ahci
>ata17: SATA max UDMA/133 abar m8192@0xfd8fe000 port 0xfd8fe100 irq 18
>ata18: SATA max UDMA/133 abar m8192@0xfd8fe000 port 0xfd8fe180 irq 18
>ata17: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata17.00: ATA-8: Hitachi HDP725025GLA380, GM2OA50E, max UDMA/133
>ata17.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata17.00: configured for UDMA/133
>ata18: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata18.00: ATA-8: Hitachi HDP725025GLA380, GM2OA50E, max UDMA/133
>ata18.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata18.00: configured for UDMA/133
>scsi 18:0:0:0: Direct-Access     ATA      Hitachi HDP72502 GM2O PQ: 0 ANSI: 5
>sd 18:0:0:0: [sdg] 488397168 512-byte hardware sectors (250059 MB)
>sd 18:0:0:0: [sdg] Write Protect is off
>sd 18:0:0:0: [sdg] Mode Sense: 00 3a 00 00
>sd 18:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 18:0:0:0: [sdg] 488397168 512-byte hardware sectors (250059 MB)
>sd 18:0:0:0: [sdg] Write Protect is off
>sd 18:0:0:0: [sdg] Mode Sense: 00 3a 00 00
>sd 18:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdg: unknown partition table
>sd 18:0:0:0: [sdg] Attached SCSI disk
>sd 18:0:0:0: Attached scsi generic sg7 type 0
>scsi 19:0:0:0: Direct-Access     ATA      Hitachi HDP72502 GM2O PQ: 0 ANSI: 5
>sd 19:0:0:0: [sdh] 488397168 512-byte hardware sectors (250059 MB)
>sd 19:0:0:0: [sdh] Write Protect is off
>sd 19:0:0:0: [sdh] Mode Sense: 00 3a 00 00
>sd 19:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 19:0:0:0: [sdh] 488397168 512-byte hardware sectors (250059 MB)
>sd 19:0:0:0: [sdh] Write Protect is off
>sd 19:0:0:0: [sdh] Mode Sense: 00 3a 00 00
>sd 19:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdh: sdh1 sdh2 sdh3
>sd 19:0:0:0: [sdh] Attached SCSI disk
>sd 19:0:0:0: Attached scsi generic sg8 type 0
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 47x/125x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 13:0:0:0: Attached scsi CD-ROM sr0
>ISO 9660 Extensions: Microsoft Joliet Level 3
>Unable to load NLS charset utf8
>Unable to load NLS charset utf8
>ISO 9660 Extensions: RRIP_1991A
>usb-storage: device scan complete
>scsi 15:0:0:0: Direct-Access              USB Flash Memory 6.50 PQ: 0 ANSI: 0 CCS
>scsi 15:0:0:1: CD-ROM                     USB Flash Memory 6.50 PQ: 0 ANSI: 0
>sd 15:0:0:0: [sdi] 3894975 512-byte hardware sectors (1994 MB)
>sd 15:0:0:0: [sdi] Write Protect is off
>sd 15:0:0:0: [sdi] Mode Sense: 45 00 00 08
>sd 15:0:0:0: [sdi] Assuming drive cache: write through
>sd 15:0:0:0: [sdi] 3894975 512-byte hardware sectors (1994 MB)
>sd 15:0:0:0: [sdi] Write Protect is off
>sd 15:0:0:0: [sdi] Mode Sense: 45 00 00 08
>sd 15:0:0:0: [sdi] Assuming drive cache: write through
> sdi: sdi1
>sd 15:0:0:0: [sdi] Attached SCSI removable disk
>sd 15:0:0:0: Attached scsi generic sg9 type 0
>sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
>sr 15:0:0:1: Attached scsi CD-ROM sr1
>sr 15:0:0:1: Attached scsi generic sg10 type 5
>ISOFS: Unable to identify CD-ROM format.
>VFS: Can't find an ext2 filesystem on dev loop0.
>SELinux:8192 avtab hash slots allocated. Num of rules:172102
>SELinux:8192 avtab hash slots allocated. Num of rules:172102
>security:  5 users, 12 roles, 2300 types, 115 bools, 1 sens, 1024 cats
>security:  72 classes, 172102 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1209675894.096:2): policy loaded auid=4294967295 ses=4294967295
>md: raid0 personality registered for level 0
>md: raid1 personality registered for level 1
>xor: automatically using best checksumming function: pIII_sse
>   pIII_sse  : 10188.000 MB/sec
>xor: using function: pIII_sse (10188.000 MB/sec)
>async_tx: api initialized (async)
>raid6: int32x1    621 MB/s
>raid6: int32x2   1128 MB/s
>raid6: int32x4    539 MB/s
>raid6: int32x8    593 MB/s
>raid6: mmxx1     2031 MB/s
>raid6: mmxx2     3781 MB/s
>raid6: sse1x1    1796 MB/s
>raid6: sse1x2    2968 MB/s
>raid6: sse2x1    3496 MB/s
>raid6: sse2x2    5222 MB/s
>raid6: using algorithm sse2x2 (5222 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>md: raid10 personality registered for level 10
>md: linear personality registered for level -1
>GFS2 (built Apr 15 2008 17:25:54) installed
>Lock_Nolock (built Apr 15 2008 17:26:02) installed
>JFS: nTxBlock = 8192, nTxLock = 65536
>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
>SGI XFS Quota Management subsystem
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>device-mapper: multipath round-robin: version 1.0.0 loaded
>device-mapper: multipath emc: version 0.0.3 loaded
>r8169: eth0: link up
>r8169: eth0: link up
>eth0: no IPv6 routers present
>md: md0 stopped.
>md: bind<sdh1>
>md: bind<sde1>
>md: md0: raid array is not clean -- starting background reconstruction
>raid1: raid set md0 active with 2 out of 2 mirrors
>md: resync of RAID array md0
>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
>md: using 128k window, over a total of 200704 blocks.
>md: md1 stopped.
>md: bind<sdh2>
>md: bind<sde3>
>raid1: raid set md1 active with 2 out of 2 mirrors
>md: md2 stopped.
>md: bind<sdh3>
>md: bind<sde2>
>md: md2: raid array is not clean -- starting background reconstruction
>raid1: raid set md2 active with 2 out of 2 mirrors
>md: delaying resync of md2 until md0 has finished (they share one or more physical units)
>md: md3 stopped.
>md: bind<sdb1>
>md: bind<sdc1>
>md: bind<sdd1>
>md: bind<sdf1>
>md: bind<sda1>
>raid5: device sda1 operational as raid disk 0
>raid5: device sdf1 operational as raid disk 4
>raid5: device sdd1 operational as raid disk 3
>raid5: device sdc1 operational as raid disk 2
>raid5: device sdb1 operational as raid disk 1
>raid5: allocated 5252kB for md3
>raid5: raid level 5 set md3 active with 5 out of 5 devices, algorithm 2
>RAID5 conf printout:
> --- rd:5 wd:5
> disk 0, o:1, dev:sda1
> disk 1, o:1, dev:sdb1
> disk 2, o:1, dev:sdc1
> disk 3, o:1, dev:sdd1
> disk 4, o:1, dev:sdf1
>md: md0: resync done.
>md: checkpointing resync of md0.
>md: resync of RAID array md2
>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
>md: using 128k window, over a total of 210443392 blocks.
>md: md0 stopped.
>md: unbind<sde1>
>md: export_rdev(sde1)
>md: unbind<sdh1>
>md: export_rdev(sdh1)
>md: md1 stopped.
>md: unbind<sde3>
>md: export_rdev(sde3)
>md: unbind<sdh2>
>md: export_rdev(sdh2)
>md: md_do_sync() got signal ... exiting
>md: checkpointing resync of md2.
>md: md2 stopped.
>md: unbind<sde2>
>md: export_rdev(sde2)
>md: unbind<sdh3>
>md: export_rdev(sdh3)
>md: md3 stopped.
>md: unbind<sda1>
>md: export_rdev(sda1)
>md: unbind<sdf1>
>md: export_rdev(sdf1)
>md: unbind<sdd1>
>md: export_rdev(sdd1)
>md: unbind<sdc1>
>md: export_rdev(sdc1)
>md: unbind<sdb1>
>md: export_rdev(sdb1)
>md: md0 stopped.
>md: bind<sdh1>
>md: bind<sde1>
>md: md0: raid array is not clean -- starting background reconstruction
>raid1: raid set md0 active with 2 out of 2 mirrors
>md: resync of RAID array md0
>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
>md: using 128k window, over a total of 200704 blocks.
>md: resuming resync of md0 from checkpoint.
>md: md1 stopped.
>md: bind<sdh2>
>md: bind<sde3>
>raid1: raid set md1 active with 2 out of 2 mirrors
>md: md2 stopped.
>md: bind<sdh3>
>md: bind<sde2>
>md: md2: raid array is not clean -- starting background reconstruction
>raid1: raid set md2 active with 2 out of 2 mirrors
>md: delaying resync of md2 until md0 has finished (they share one or more physical units)
>md: md3 stopped.
>md: bind<sdb1>
>md: bind<sdc1>
>md: bind<sdd1>
>md: bind<sdf1>
>md: bind<sda1>
>raid5: device sda1 operational as raid disk 0
>raid5: device sdf1 operational as raid disk 4
>raid5: device sdd1 operational as raid disk 3
>raid5: device sdc1 operational as raid disk 2
>raid5: device sdb1 operational as raid disk 1
>raid5: allocated 5252kB for md3
>raid5: raid level 5 set md3 active with 5 out of 5 devices, algorithm 2
>RAID5 conf printout:
> --- rd:5 wd:5
> disk 0, o:1, dev:sda1
> disk 1, o:1, dev:sdb1
> disk 2, o:1, dev:sdc1
> disk 3, o:1, dev:sdd1
> disk 4, o:1, dev:sdf1
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev md0, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>md: md0: resync done.
>md: checkpointing resync of md0.
>md: resync of RAID array md2
>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
>md: using 128k window, over a total of 210443392 blocks.
>md: resuming resync of md2 from checkpoint.
>md: md0 stopped.
>md: unbind<sde1>
>md: export_rdev(sde1)
>md: unbind<sdh1>
>md: export_rdev(sdh1)
>md: md1 stopped.
>md: unbind<sde3>
>md: export_rdev(sde3)
>md: unbind<sdh2>
>md: export_rdev(sdh2)
>md: md2: resync done.
>md: checkpointing resync of md2.
>md: md2 stopped.
>md: unbind<sde2>
>md: export_rdev(sde2)
>md: unbind<sdh3>
>md: export_rdev(sdh3)
>md: md3 stopped.
>md: unbind<sda1>
>md: export_rdev(sda1)
>md: unbind<sdf1>
>md: export_rdev(sdf1)
>md: unbind<sdd1>
>md: export_rdev(sdd1)
>md: unbind<sdc1>
>md: export_rdev(sdc1)
>md: unbind<sdb1>
>md: export_rdev(sdb1)
>md: md0 stopped.
>md: bind<sdh1>
>md: bind<sde1>
>md: md0: raid array is not clean -- starting background reconstruction
>raid1: raid set md0 active with 2 out of 2 mirrors
>md: resync of RAID array md0
>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
>md: using 128k window, over a total of 200704 blocks.
>md: resuming resync of md0 from checkpoint.
>md: md0: resync done.
>RAID1 conf printout:
> --- wd:2 rd:2
> disk 0, wo:0, o:1, dev:sde1
> disk 1, wo:0, o:1, dev:sdh1
>md: md1 stopped.
>md: bind<sdh2>
>md: bind<sde3>
>raid1: raid set md1 active with 2 out of 2 mirrors
>md: md2 stopped.
>md: bind<sdh3>
>md: bind<sde2>
>md: md2: raid array is not clean -- starting background reconstruction
>raid1: raid set md2 active with 2 out of 2 mirrors
>md: resync of RAID array md2
>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
>md: using 128k window, over a total of 210443392 blocks.
>md: resuming resync of md2 from checkpoint.
>md: md3 stopped.
>md: bind<sdb1>
>md: bind<sdc1>
>md: bind<sdd1>
>md: bind<sdf1>
>md: bind<sda1>
>raid5: device sda1 operational as raid disk 0
>raid5: device sdf1 operational as raid disk 4
>raid5: device sdd1 operational as raid disk 3
>raid5: device sdc1 operational as raid disk 2
>raid5: device sdb1 operational as raid disk 1
>raid5: allocated 5252kB for md3
>raid5: raid level 5 set md3 active with 5 out of 5 devices, algorithm 2
>RAID5 conf printout:
> --- rd:5 wd:5
> disk 0, o:1, dev:sda1
> disk 1, o:1, dev:sdb1
> disk 2, o:1, dev:sdc1
> disk 3, o:1, dev:sdd1
> disk 4, o:1, dev:sdf1
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>atkbd.c: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e060 <keycode>' to make it known.

Actions: View

Attachments on bug 443451: 303234 | 303328 | 303387 | 303396 | 303398 | 303400 | 304355 | 304356 | 304358 | 304359 | 304473 | 304498