Attachment 304361 Details for Bug 439685 – /var/log/ fies, ifconfig -a and iwconfig (usb-stick attached, but no lan-cabel)

/var/log/ fies, ifconfig -a and iwconfig (usb-stick attached, but no lan-cabel)

if-iwconfig_and-system-logs.txt (text/plain), 57.22 KB, created by Erhard Kroeger on 2008-05-02 04:25:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Erhard Kroeger

Created: 2008-05-02 04:25:04 UTC

Size: 57.22 KB

patch

obsolete

>********************************************************************************************************************************************
>/var/log/dmesg
>********************************************************************************************************************************************
>Initializing cgroup subsys cpuset
>Linux version 2.6.24.5-87.fc8 (mockbuild@hammer2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Apr 25 01:24:12 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
> BIOS-e820: 000000001bef0000 - 000000001beff000 (ACPI data)
> BIOS-e820: 000000001beff000 - 000000001bf00000 (ACPI NVS)
> BIOS-e820: 000000001bf00000 - 000000001c000000 (reserved)
> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>446MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 114416) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   114416
>  HighMem    114416 ->   114416
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   114416
>On node 0 totalpages: 114416
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 861 pages used for memmap
>  Normal zone: 109459 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F7290, 0014 (r0 PTLTD )
>ACPI: RSDT 1BEF8B70, 0030 (r1 PTLTD    RSDT    6040000  LTP        0)
>ACPI: FACP 1BEFEE2B, 0074 (r1 ATI    Raptor    6040000 ATI     F4240)
>ACPI: DSDT 1BEF8BA0, 628B (r1    ATI U1_M1535  6040000 MSFT  100000D)
>ACPI: FACS 1BEFFFC0, 0040
>ACPI: BOOT 1BEFEE9F, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>ACPI: SSDT 1BEFEEC7, 0139 (r1 PTLTD  POWERNOW  6040000  LTP        1)
>ACPI: DMI detected: Hewlett-Packard
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x8008
>Allocating PCI resources starting at 20000000 (gap: 1c000000:e3fc0000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000
>swsusp: Registered nosave memory region: 00000000000d0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113523
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffb000 (0138d000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07bb000 soft=c079b000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1855.198 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 444824k/457664k available (2238k kernel code, 12212k reserved, 1131k data, 288k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xdc800000 - 0xff7fe000   ( 559 MB)
>    lowmem  : 0xc0000000 - 0xdbef0000   ( 446 MB)
>      .init : 0xc0750000 - 0xc0798000   ( 288 kB)
>      .data : 0xc062f955 - 0xc074a724   (1131 kB)
>      .text : 0xc0400000 - 0xc062f955   (2238 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3711.69 BogoMIPS (lpj=1855846)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: After all inits, caps: 0383f1ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0e28)
>CPU0: AMD mobile AMD Athlon(tm) XP2500+ stepping 00
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 64 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 18:50:40  Date: 05/01/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd87b, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 8000-803f claimed by ali7101 ACPI
>PCI quirk: region 8040-805f claimed by ali7101 SMB
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 *10)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 7 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *10)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 7 11) *10
>ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 10)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7)
>ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 6 10) *9
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>system 00:07: ioport range 0x40b-0x40b has been reserved
>system 00:07: ioport range 0x480-0x48f has been reserved
>system 00:07: ioport range 0x4d0-0x4d1 has been reserved
>system 00:07: ioport range 0x4d6-0x4d6 has been reserved
>system 00:07: ioport range 0x8000-0x807f could not be reserved
>system 00:07: ioport range 0xff00-0xff01 has been reserved
>system 00:07: ioport range 0x8004-0x8005 has been reserved
>system 00:07: ioport range 0xfe00-0xfefe has been reserved
>system 00:07: iomem range 0xd0400000-0xd0400fff has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: d0100000-d01fffff
>  PREFETCH window: e0000000-efffffff
>PCI: Bus 2, cardbus bridge: 0000:00:0a.0
>  IO window: 00001000-000010ff
>  IO window: 00001400-000014ff
>  PREFETCH window: 20000000-23ffffff
>  MEM window: 24000000-27ffffff
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3654k freed
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1209667840.487:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 3D560214AA8BF33
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb.
>Activating ISA DMA hang workarounds.
>Boot video device is 0000:01:05.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Thermal Zone [THRM] (62 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected Ati IGP320/M chipset
>agpgart: AGP aperture is 64M @ 0xd4000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3
>PCI: setting IRQ 3 as level-triggered
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKG] -> GSI 3 (level, low) -> IRQ 3
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:00:0a.0 [0000:0000]
>Yenta O2: res at 0x94/0xD4: 00/ea
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x04b8, PCI irq 11
>Socket status: 30000007
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor ladder
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>atkbd.c: Unknown key pressed (translated set 2, code 0xee on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xee on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known.
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
>powernow: No PST tables match this cpuid (0x7a0)
>powernow: This is indicative of a broken BIOS.
>powernow: Trying ACPI perflib
>powernow: Minimum speed 530 MHz. Maximum speed 1855 MHz.
>powernow-k8: Processor cpuid 6a0 not supported
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 8:763:846
>Freeing unused kernel memory: 288k freed
>Write protecting the kernel read-only data: 894k
>Marking TSC unstable due to: TSC halts in idle.
>Time: acpi_pm clocksource has been installed.
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKU] -> GSI 10 (level, low) -> IRQ 10
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 10, io mem 0xd0004000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: Unable to derive IRQ for device 0000:00:10.0
>scsi0 : pata_ali
>scsi1 : pata_ali
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8080 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8088 irq 15
>usb 1-2: new low speed USB device using ohci_hcd and address 2
>ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD4A, max UDMA/100
>ata1.00: 117210240 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>usb 1-2: configuration #1 chosen from 1 choice
>input: HID 062a:0000 as /class/input/input3
>input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:02.0-2
>ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, 0C29, max MWDMA2
>ata2.00: configured for MWDMA2
>scsi 0:0:0:0: Direct-Access     ATA      IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4241N 0C29 PQ: 0 ANSI: 5
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1209667850.056:2): selinux=0 auid=4294967295
>FDC 0 is a post-1991 82077
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>input: PC Speaker as /class/input/input4
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>natsemi dp8381x driver, version 2.1, Sept 11, 2006
>  originally by Donald Becker <becker@scyld.com>
>  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>natsemi eth0: NatSemi DP8381[56] at 0xd0008000 (0000:00:12.0), 00:0b:cd:7a:44:8f, IRQ 11, port TP.
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
>alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>input: Lid Switch as /class/input/input7
>ACPI: Lid Switch [LID]
>PCI: Enabling device 0000:00:11.0 (0000 -> 0001)
>ALi_M1535: initialized. timeout=60 sec (nowayout=0)
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
>alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
>firewire_ohci: Added fw-ohci device 0000:00:0c.0, OHCI version 1.10
>ACPI: Battery Slot [BAT1] (battery present)
>input: Video Bus as /class/input/input8
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>firewire_core: created device fw0: GUID 000bcd009e34c31d, S400
>udev: renamed network interface eth0 to wlan0
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5
>AC'97 1 does not respond - RESET
>AC'97 1 access is not valid [0xffffffff], removing mixer.
>ali mixer 1 creating error.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.28.0 20060524 on minor 0
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 917496k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:917496k
>********************************************************************************************************************************************
>/var/log/messages
>********************************************************************************************************************************************
>May  1 20:51:22 localhost rsyslogd: [origin software="rsyslogd" swVersion="2.0.2" x-pid="1709" x-info="http://www.rsyslog.com"][x-configInfo udpReception="No" udpPort="514" tcpReception="No" tcpPort="0"] restart
>May  1 20:51:22 localhost kernel: rklogd 2.0.2, log source = /proc/kmsg started.
>May  1 20:51:22 localhost kernel: Initializing cgroup subsys cpuset
>May  1 20:51:22 localhost kernel: Linux version 2.6.24.5-87.fc8 (mockbuild@hammer2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Apr 25 01:24:12 EDT 2008
>May  1 20:51:22 localhost kernel: BIOS-provided physical RAM map:
>May  1 20:51:22 localhost kernel:  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
>May  1 20:51:22 localhost kernel:  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
>May  1 20:51:22 localhost kernel:  BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
>May  1 20:51:22 localhost kernel:  BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
>May  1 20:51:22 localhost kernel:  BIOS-e820: 000000001bef0000 - 000000001beff000 (ACPI data)
>May  1 20:51:22 localhost kernel:  BIOS-e820: 000000001beff000 - 000000001bf00000 (ACPI NVS)
>May  1 20:51:22 localhost kernel:  BIOS-e820: 000000001bf00000 - 000000001c000000 (reserved)
>May  1 20:51:22 localhost kernel:  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
>May  1 20:51:22 localhost kernel: 0MB HIGHMEM available.
>May  1 20:51:22 localhost kernel: 446MB LOWMEM available.
>May  1 20:51:22 localhost kernel: Using x86 segment limits to approximate NX protection
>May  1 20:51:22 localhost kernel: Zone PFN ranges:
>May  1 20:51:22 localhost kernel:   DMA             0 ->     4096
>May  1 20:51:22 localhost kernel:   Normal       4096 ->   114416
>May  1 20:51:22 localhost kernel:   HighMem    114416 ->   114416
>May  1 20:51:22 localhost kernel: Movable zone start PFN for each node
>May  1 20:51:22 localhost kernel: early_node_map[1] active PFN ranges
>May  1 20:51:22 localhost kernel:     0:        0 ->   114416
>May  1 20:51:22 localhost kernel: DMI 2.3 present.
>May  1 20:51:22 localhost kernel: Using APIC driver default
>May  1 20:51:22 localhost kernel: ACPI: RSDP 000F7290, 0014 (r0 PTLTD )
>May  1 20:51:22 localhost kernel: ACPI: RSDT 1BEF8B70, 0030 (r1 PTLTD    RSDT    6040000  LTP        0)
>May  1 20:51:22 localhost kernel: ACPI: FACP 1BEFEE2B, 0074 (r1 ATI    Raptor    6040000 ATI     F4240)
>May  1 20:51:22 localhost kernel: ACPI: DSDT 1BEF8BA0, 628B (r1    ATI U1_M1535  6040000 MSFT  100000D)
>May  1 20:51:22 localhost kernel: ACPI: FACS 1BEFFFC0, 0040
>May  1 20:51:22 localhost kernel: ACPI: BOOT 1BEFEE9F, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>May  1 20:51:22 localhost kernel: ACPI: SSDT 1BEFEEC7, 0139 (r1 PTLTD  POWERNOW  6040000  LTP        1)
>May  1 20:51:22 localhost kernel: ACPI: DMI detected: Hewlett-Packard
>May  1 20:51:22 localhost kernel: ATI board detected. Disabling timer routing over 8254.
>May  1 20:51:22 localhost kernel: ACPI: PM-Timer IO Port: 0x8008
>May  1 20:51:22 localhost kernel: Allocating PCI resources starting at 20000000 (gap: 1c000000:e3fc0000)
>May  1 20:51:22 localhost kernel: swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>May  1 20:51:22 localhost kernel: swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000
>May  1 20:51:22 localhost kernel: swsusp: Registered nosave memory region: 00000000000d0000 - 0000000000100000
>May  1 20:51:22 localhost kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113523
>May  1 20:51:22 localhost kernel: Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>May  1 20:51:22 localhost kernel: Local APIC disabled by BIOS -- you can enable it with "lapic"
>May  1 20:51:22 localhost kernel: Enabling fast FPU save and restore... done.
>May  1 20:51:22 localhost kernel: Enabling unmasked SIMD FPU exception support... done.
>May  1 20:51:22 localhost kernel: Initializing CPU#0
>May  1 20:51:22 localhost kernel: CPU 0 irqstacks, hard=c07bb000 soft=c079b000
>May  1 20:51:22 localhost kernel: PID hash table entries: 2048 (order: 11, 8192 bytes)
>May  1 20:51:22 localhost kernel: Detected 1855.198 MHz processor.
>May  1 20:51:22 localhost kernel: Console: colour VGA+ 80x25
>May  1 20:51:22 localhost kernel: console [tty0] enabled
>May  1 20:51:22 localhost kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>May  1 20:51:22 localhost kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>May  1 20:51:22 localhost kernel: Memory: 444824k/457664k available (2238k kernel code, 12212k reserved, 1131k data, 288k init, 0k highmem)
>May  1 20:51:22 localhost kernel: virtual kernel memory layout:
>May  1 20:51:22 localhost kernel:     fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>May  1 20:51:22 localhost kernel:     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>May  1 20:51:22 localhost kernel:     vmalloc : 0xdc800000 - 0xff7fe000   ( 559 MB)
>May  1 20:51:22 localhost kernel:     lowmem  : 0xc0000000 - 0xdbef0000   ( 446 MB)
>May  1 20:51:22 localhost kernel:       .init : 0xc0750000 - 0xc0798000   ( 288 kB)
>May  1 20:51:22 localhost kernel:       .data : 0xc062f955 - 0xc074a724   (1131 kB)
>May  1 20:51:22 localhost kernel:       .text : 0xc0400000 - 0xc062f955   (2238 kB)
>May  1 20:51:22 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
>May  1 20:51:22 localhost kernel: SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>May  1 20:51:22 localhost kernel: Calibrating delay using timer specific routine.. 3711.69 BogoMIPS (lpj=1855846)
>May  1 20:51:22 localhost kernel: Security Framework initialized
>May  1 20:51:22 localhost kernel: SELinux:  Initializing.
>May  1 20:51:22 localhost kernel: selinux_register_security:  Registering secondary module capability
>May  1 20:51:22 localhost kernel: Capability LSM initialized as secondary
>May  1 20:51:22 localhost kernel: Mount-cache hash table entries: 512
>May  1 20:51:22 localhost kernel: Initializing cgroup subsys ns
>May  1 20:51:22 localhost kernel: Initializing cgroup subsys cpuacct
>May  1 20:51:22 localhost kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>May  1 20:51:22 localhost kernel: CPU: L2 Cache: 512K (64 bytes/line)
>May  1 20:51:22 localhost kernel: Intel machine check architecture supported.
>May  1 20:51:22 localhost kernel: Intel machine check reporting enabled on CPU#0.
>May  1 20:51:22 localhost kernel: Compat vDSO mapped to ffffe000.
>May  1 20:51:22 localhost kernel: Checking 'hlt' instruction... OK.
>May  1 20:51:22 localhost kernel: SMP alternatives: switching to UP code
>May  1 20:51:22 localhost kernel: Freeing SMP alternatives: 14k freed
>May  1 20:51:22 localhost kernel: ACPI: Core revision 20070126
>May  1 20:51:22 localhost kernel: ACPI: setting ELCR to 0200 (from 0e28)
>May  1 20:51:22 localhost kernel: CPU0: AMD mobile AMD Athlon(tm) XP2500+ stepping 00
>May  1 20:51:22 localhost kernel: SMP motherboard not detected.
>May  1 20:51:22 localhost kernel: Local APIC not detected. Using dummy APIC emulation.
>May  1 20:51:22 localhost kernel: Brought up 1 CPUs
>May  1 20:51:22 localhost kernel: net_namespace: 64 bytes
>May  1 20:51:22 localhost kernel: Booting paravirtualized kernel on bare hardware
>May  1 20:51:22 localhost kernel: Time: 18:50:40  Date: 05/01/08
>May  1 20:51:22 localhost kernel: NET: Registered protocol family 16
>May  1 20:51:22 localhost kernel: No dock devices found.
>May  1 20:51:22 localhost kernel: ACPI: bus type pci registered
>May  1 20:51:22 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd87b, last bus=2
>May  1 20:51:22 localhost kernel: PCI: Using configuration type 1
>May  1 20:51:22 localhost kernel: Setting up standard PCI resources
>May  1 20:51:22 localhost kernel: ACPI: Interpreter enabled
>May  1 20:51:22 localhost kernel: ACPI: (supports S0 S3 S4 S5)
>May  1 20:51:22 localhost kernel: ACPI: Using PIC for interrupt routing
>May  1 20:51:22 localhost kernel: ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
>May  1 20:51:22 localhost kernel: ACPI: EC: driver started in poll mode
>May  1 20:51:22 localhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
>May  1 20:51:22 localhost kernel: PCI quirk: region 8000-803f claimed by ali7101 ACPI
>May  1 20:51:22 localhost kernel: PCI quirk: region 8040-805f claimed by ali7101 SMB
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 *10)
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 7 *11)
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *10)
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 10) *0, disabled.
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 10) *0, disabled.
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 7 11) *10
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 10)
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7)
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 6 10) *9
>May  1 20:51:22 localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
>May  1 20:51:22 localhost kernel: pnp: PnP ACPI init
>May  1 20:51:22 localhost kernel: ACPI: bus type pnp registered
>May  1 20:51:22 localhost kernel: pnp: PnP ACPI: found 11 devices
>May  1 20:51:22 localhost kernel: ACPI: ACPI bus type pnp unregistered
>May  1 20:51:22 localhost kernel: ACPI: EC: non-query interrupt received, switching to interrupt mode
>May  1 20:51:22 localhost kernel: usbcore: registered new interface driver usbfs
>May  1 20:51:22 localhost kernel: usbcore: registered new interface driver hub
>May  1 20:51:22 localhost kernel: usbcore: registered new device driver usb
>May  1 20:51:22 localhost kernel: PCI: Using ACPI for IRQ routing
>May  1 20:51:22 localhost kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>May  1 20:51:22 localhost kernel: NetLabel: Initializing
>May  1 20:51:22 localhost kernel: NetLabel:  domain hash size = 128
>May  1 20:51:22 localhost kernel: NetLabel:  protocols = UNLABELED CIPSOv4
>May  1 20:51:22 localhost kernel: NetLabel:  unlabeled traffic allowed by default
>May  1 20:51:22 localhost kernel: Time: tsc clocksource has been installed.
>May  1 20:51:22 localhost kernel: system 00:07: ioport range 0x40b-0x40b has been reserved
>May  1 20:51:22 localhost kernel: system 00:07: ioport range 0x480-0x48f has been reserved
>May  1 20:51:22 localhost kernel: system 00:07: ioport range 0x4d0-0x4d1 has been reserved
>May  1 20:51:22 localhost kernel: system 00:07: ioport range 0x4d6-0x4d6 has been reserved
>May  1 20:51:22 localhost kernel: system 00:07: ioport range 0x8000-0x807f could not be reserved
>May  1 20:51:22 localhost kernel: system 00:07: ioport range 0xff00-0xff01 has been reserved
>May  1 20:51:22 localhost kernel: system 00:07: ioport range 0x8004-0x8005 has been reserved
>May  1 20:51:22 localhost kernel: system 00:07: ioport range 0xfe00-0xfefe has been reserved
>May  1 20:51:22 localhost kernel: system 00:07: iomem range 0xd0400000-0xd0400fff has been reserved
>May  1 20:51:22 localhost kernel: PCI: Bridge: 0000:00:01.0
>May  1 20:51:22 localhost kernel:   IO window: 9000-9fff
>May  1 20:51:22 localhost kernel:   MEM window: d0100000-d01fffff
>May  1 20:51:22 localhost kernel:   PREFETCH window: e0000000-efffffff
>May  1 20:51:22 localhost kernel: PCI: Bus 2, cardbus bridge: 0000:00:0a.0
>May  1 20:51:22 localhost kernel:   IO window: 00001000-000010ff
>May  1 20:51:22 localhost kernel:   IO window: 00001400-000014ff
>May  1 20:51:22 localhost kernel:   PREFETCH window: 20000000-23ffffff
>May  1 20:51:22 localhost kernel:   MEM window: 24000000-27ffffff
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
>May  1 20:51:22 localhost kernel: NET: Registered protocol family 2
>May  1 20:51:22 localhost kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>May  1 20:51:22 localhost kernel: TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>May  1 20:51:22 localhost kernel: TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>May  1 20:51:22 localhost kernel: TCP: Hash tables configured (established 16384 bind 16384)
>May  1 20:51:22 localhost kernel: TCP reno registered
>May  1 20:51:22 localhost kernel: checking if image is initramfs... it is
>May  1 20:51:22 localhost kernel: Freeing initrd memory: 3654k freed
>May  1 20:51:22 localhost kernel: Simple Boot Flag at 0x36 set to 0x1
>May  1 20:51:22 localhost kernel: apm: BIOS not found.
>May  1 20:51:22 localhost kernel: audit: initializing netlink socket (disabled)
>May  1 20:51:22 localhost kernel: audit(1209667840.487:1): initialized
>May  1 20:51:22 localhost kernel: Total HugeTLB memory allocated, 0
>May  1 20:51:22 localhost kernel: VFS: Disk quotas dquot_6.5.1
>May  1 20:51:22 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>May  1 20:51:22 localhost kernel: ksign: Installing public key data
>May  1 20:51:22 localhost kernel: Loading keyring
>May  1 20:51:22 localhost kernel: - Added public key 3D560214AA8BF33
>May  1 20:51:22 localhost kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key)
>May  1 20:51:22 localhost kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>May  1 20:51:22 localhost kernel: io scheduler noop registered
>May  1 20:51:22 localhost kernel: io scheduler anticipatory registered
>May  1 20:51:22 localhost kernel: io scheduler deadline registered
>May  1 20:51:22 localhost kernel: io scheduler cfq registered (default)
>May  1 20:51:22 localhost kernel: ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb.
>May  1 20:51:22 localhost kernel: Activating ISA DMA hang workarounds.
>May  1 20:51:22 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>May  1 20:51:22 localhost kernel: ACPI: CPU0 (power states: C1[C1] C2[C2])
>May  1 20:51:22 localhost kernel: ACPI: Thermal Zone [THRM] (62 C)
>May  1 20:51:22 localhost kernel: isapnp: Scanning for PnP cards...
>May  1 20:51:22 localhost kernel: isapnp: No Plug & Play device found
>May  1 20:51:22 localhost kernel: Real Time Clock Driver v1.12ac
>May  1 20:51:22 localhost kernel: Non-volatile memory driver v1.2
>May  1 20:51:22 localhost kernel: Linux agpgart interface v0.102
>May  1 20:51:22 localhost kernel: agpgart: Detected Ati IGP320/M chipset
>May  1 20:51:22 localhost kernel: agpgart: AGP aperture is 64M @ 0xd4000000
>May  1 20:51:22 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>May  1 20:51:22 localhost kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>May  1 20:51:22 localhost kernel: 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKG] -> GSI 3 (level, low) -> IRQ 3
>May  1 20:51:22 localhost kernel: ACPI: PCI interrupt for device 0000:00:08.0 disabled
>May  1 20:51:22 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>May  1 20:51:22 localhost kernel: input: Macintosh mouse button emulation as /class/input/input0
>May  1 20:51:22 localhost kernel: Yenta: CardBus bridge found at 0000:00:0a.0 [0000:0000]
>May  1 20:51:22 localhost kernel: Yenta O2: res at 0x94/0xD4: 00/ea
>May  1 20:51:22 localhost kernel: Yenta O2: enabling read prefetch/write burst
>May  1 20:51:22 localhost kernel: Yenta: ISA IRQ mask 0x04b8, PCI irq 11
>May  1 20:51:22 localhost kernel: Socket status: 30000007
>May  1 20:51:22 localhost kernel: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>May  1 20:51:22 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
>May  1 20:51:22 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
>May  1 20:51:22 localhost kernel: mice: PS/2 mouse device common for all mice
>May  1 20:51:22 localhost kernel: input: AT Translated Set 2 keyboard as /class/input/input1
>May  1 20:51:22 localhost kernel: cpuidle: using governor ladder
>May  1 20:51:22 localhost kernel: Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
>May  1 20:51:22 localhost kernel: input: SynPS/2 Synaptics TouchPad as /class/input/input2
>May  1 20:51:22 localhost kernel: atkbd.c: Unknown key pressed (translated set 2, code 0xee on isa0060/serio0).
>May  1 20:51:22 localhost kernel: atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known.
>May  1 20:51:22 localhost kernel: atkbd.c: Unknown key released (translated set 2, code 0xee on isa0060/serio0).
>May  1 20:51:22 localhost kernel: atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known.
>May  1 20:51:22 localhost kernel: cpuidle: using governor menu
>May  1 20:51:22 localhost kernel: usbcore: registered new interface driver hiddev
>May  1 20:51:22 localhost kernel: usbcore: registered new interface driver usbhid
>May  1 20:51:22 localhost kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>May  1 20:51:22 localhost kernel: TCP cubic registered
>May  1 20:51:22 localhost kernel: Initializing XFRM netlink socket
>May  1 20:51:22 localhost kernel: NET: Registered protocol family 1
>May  1 20:51:22 localhost kernel: NET: Registered protocol family 17
>May  1 20:51:22 localhost kernel: powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
>May  1 20:51:22 localhost kernel: powernow: No PST tables match this cpuid (0x7a0)
>May  1 20:51:22 localhost kernel: powernow: This is indicative of a broken BIOS.
>May  1 20:51:22 localhost kernel: powernow: Trying ACPI perflib
>May  1 20:51:22 localhost kernel: powernow: Minimum speed 530 MHz. Maximum speed 1855 MHz.
>May  1 20:51:22 localhost kernel: powernow-k8: Processor cpuid 6a0 not supported
>May  1 20:51:22 localhost kernel: Using IPI No-Shortcut mode
>May  1 20:51:22 localhost kernel: registered taskstats version 1
>May  1 20:51:22 localhost kernel:   Magic number: 8:763:846
>May  1 20:51:22 localhost kernel: Freeing unused kernel memory: 288k freed
>May  1 20:51:22 localhost kernel: Write protecting the kernel read-only data: 894k
>May  1 20:51:22 localhost kernel: Marking TSC unstable due to: TSC halts in idle.
>May  1 20:51:22 localhost kernel: Time: acpi_pm clocksource has been installed.
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKU] -> GSI 10 (level, low) -> IRQ 10
>May  1 20:51:22 localhost kernel: ohci_hcd 0000:00:02.0: OHCI Host Controller
>May  1 20:51:22 localhost kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>May  1 20:51:22 localhost kernel: ohci_hcd 0000:00:02.0: irq 10, io mem 0xd0004000
>May  1 20:51:22 localhost kernel: usb usb1: configuration #1 chosen from 1 choice
>May  1 20:51:22 localhost kernel: hub 1-0:1.0: USB hub found
>May  1 20:51:22 localhost kernel: hub 1-0:1.0: 4 ports detected
>May  1 20:51:22 localhost kernel: USB Universal Host Controller Interface driver v3.0
>May  1 20:51:22 localhost kernel: SCSI subsystem initialized
>May  1 20:51:22 localhost kernel: Driver 'sd' needs updating - please use bus_type methods
>May  1 20:51:22 localhost kernel: ACPI: Unable to derive IRQ for device 0000:00:10.0
>May  1 20:51:22 localhost kernel: scsi0 : pata_ali
>May  1 20:51:22 localhost kernel: scsi1 : pata_ali
>May  1 20:51:22 localhost kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8080 irq 14
>May  1 20:51:22 localhost kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8088 irq 15
>May  1 20:51:22 localhost kernel: usb 1-2: new low speed USB device using ohci_hcd and address 2
>May  1 20:51:22 localhost kernel: ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD4A, max UDMA/100
>May  1 20:51:22 localhost kernel: ata1.00: 117210240 sectors, multi 16: LBA48 
>May  1 20:51:22 localhost kernel: ata1.00: configured for UDMA/100
>May  1 20:51:22 localhost kernel: usb 1-2: configuration #1 chosen from 1 choice
>May  1 20:51:22 localhost kernel: input: HID 062a:0000 as /class/input/input3
>May  1 20:51:22 localhost kernel: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:02.0-2
>May  1 20:51:22 localhost kernel: ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, 0C29, max MWDMA2
>May  1 20:51:22 localhost kernel: ata2.00: configured for MWDMA2
>May  1 20:51:22 localhost kernel: scsi 0:0:0:0: Direct-Access     ATA      IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5
>May  1 20:51:22 localhost kernel: sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>May  1 20:51:22 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
>May  1 20:51:22 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>May  1 20:51:22 localhost kernel: sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>May  1 20:51:22 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
>May  1 20:51:22 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>May  1 20:51:22 localhost kernel:  sda: sda1 sda2 sda3
>May  1 20:51:22 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
>May  1 20:51:22 localhost kernel: scsi 1:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4241N 0C29 PQ: 0 ANSI: 5
>May  1 20:51:22 localhost kernel: device-mapper: uevent: version 1.0.3
>May  1 20:51:22 localhost kernel: device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>May  1 20:51:22 localhost kernel: kjournald starting.  Commit interval 5 seconds
>May  1 20:51:22 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
>May  1 20:51:22 localhost kernel: SELinux:  Disabled at runtime.
>May  1 20:51:22 localhost kernel: audit(1209667850.056:2): selinux=0 auid=4294967295
>May  1 20:51:22 localhost kernel: FDC 0 is a post-1991 82077
>May  1 20:51:22 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
>May  1 20:51:22 localhost kernel: scsi 1:0:0:0: Attached scsi generic sg1 type 5
>May  1 20:51:22 localhost kernel: Driver 'sr' needs updating - please use bus_type methods
>May  1 20:51:22 localhost kernel: sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>May  1 20:51:22 localhost kernel: Uniform CD-ROM driver Revision: 3.20
>May  1 20:51:22 localhost kernel: input: PC Speaker as /class/input/input4
>May  1 20:51:22 localhost kernel: cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>May  1 20:51:22 localhost kernel: cs: IO port probe 0x3e0-0x4ff: clean.
>May  1 20:51:22 localhost kernel: cs: IO port probe 0x820-0x8ff: clean.
>May  1 20:51:22 localhost kernel: cs: IO port probe 0xc00-0xcf7: clean.
>May  1 20:51:22 localhost kernel: cs: IO port probe 0xa00-0xaff: clean.
>May  1 20:51:22 localhost kernel: natsemi dp8381x driver, version 2.1, Sept 11, 2006
>May  1 20:51:22 localhost kernel:   originally by Donald Becker <becker@scyld.com>
>May  1 20:51:22 localhost kernel:   2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>May  1 20:51:22 localhost kernel: natsemi eth0: NatSemi DP8381[56] at 0xd0008000 (0000:00:12.0), 00:0b:cd:7a:44:8f, IRQ 11, port TP.
>May  1 20:51:22 localhost kernel: parport_pc 00:09: reported by Plug and Play ACPI
>May  1 20:51:22 localhost kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>May  1 20:51:22 localhost kernel: alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
>May  1 20:51:22 localhost kernel: alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
>May  1 20:51:22 localhost kernel: input: Power Button (FF) as /class/input/input5
>May  1 20:51:22 localhost kernel: ACPI: Power Button (FF) [PWRF]
>May  1 20:51:22 localhost kernel: input: Power Button (CM) as /class/input/input6
>May  1 20:51:22 localhost kernel: ACPI: Power Button (CM) [PWRB]
>May  1 20:51:22 localhost kernel: input: Lid Switch as /class/input/input7
>May  1 20:51:22 localhost kernel: ACPI: Lid Switch [LID]
>May  1 20:51:22 localhost kernel: PCI: Enabling device 0000:00:11.0 (0000 -> 0001)
>May  1 20:51:22 localhost kernel: ALi_M1535: initialized. timeout=60 sec (nowayout=0)
>May  1 20:51:22 localhost kernel: ACPI: AC Adapter [ACAD] (on-line)
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>May  1 20:51:22 localhost kernel: alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
>May  1 20:51:22 localhost kernel: alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
>May  1 20:51:22 localhost kernel: firewire_ohci: Added fw-ohci device 0000:00:0c.0, OHCI version 1.10
>May  1 20:51:22 localhost kernel: ACPI: Battery Slot [BAT1] (battery present)
>May  1 20:51:22 localhost kernel: input: Video Bus as /class/input/input8
>May  1 20:51:22 localhost kernel: ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>May  1 20:51:22 localhost kernel: firewire_core: created device fw0: GUID 000bcd009e34c31d, S400
>May  1 20:51:22 localhost kernel: udev: renamed network interface eth0 to wlan0
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5
>May  1 20:51:22 localhost kernel: AC'97 1 does not respond - RESET
>May  1 20:51:22 localhost kernel: AC'97 1 access is not valid [0xffffffff], removing mixer.
>May  1 20:51:22 localhost kernel: ali mixer 1 creating error.
>May  1 20:51:22 localhost kernel: NET: Registered protocol family 10
>May  1 20:51:22 localhost kernel: lo: Disabled Privacy Extensions
>May  1 20:51:22 localhost kernel: ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>May  1 20:51:22 localhost kernel: [drm] Initialized drm 1.1.0 20060810
>May  1 20:51:22 localhost kernel: [drm] Initialized radeon 1.28.0 20060524 on minor 0
>May  1 20:51:22 localhost kernel: device-mapper: multipath: version 1.0.5 loaded
>May  1 20:51:22 localhost kernel: loop: module loaded
>May  1 20:51:22 localhost kernel: EXT3 FS on dm-0, internal journal
>May  1 20:51:22 localhost kernel: kjournald starting.  Commit interval 5 seconds
>May  1 20:51:22 localhost kernel: EXT3 FS on sda2, internal journal
>May  1 20:51:22 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
>May  1 20:51:22 localhost kernel: Adding 917496k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:917496k
>May  1 20:51:22 localhost kernel: warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>May  1 20:51:22 localhost kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
>May  1 20:51:22 localhost kernel: nf_conntrack version 0.5.0 (7168 buckets, 28672 max)
>May  1 20:51:22 localhost kernel: Clocksource tsc unstable (delta = -230259226 ns)
>May  1 20:51:22 localhost kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
>May  1 20:51:22 localhost kernel: RPC: Registered udp transport module.
>May  1 20:51:22 localhost kernel: RPC: Registered tcp transport module.
>May  1 20:51:22 localhost kernel: fuse init (API version 7.9)
>May  1 20:51:22 localhost auditd[1728]: Started dispatcher: /sbin/audispd pid: 1730
>May  1 20:51:22 localhost kernel: audit(1209667882.754:3): audit_pid=1728 old=0 by auid=4294967295
>May  1 20:51:22 localhost auditd[1728]: Init complete, auditd 1.7.2 listening for events (startup state enable)
>May  1 20:51:22 localhost audispd: af_unix plugin initialized
>May  1 20:51:22 localhost audispd: audispd initialized with q_depth=80 and 1 active plugins
>May  1 20:51:24 localhost automount[1763]: lookup_read_master: lookup(nisplus): couldn't locate nis+ table auto.master
>May  1 20:51:25 localhost acpid: starting up
>May  1 20:51:25 localhost hcid[1790]: Bluetooth HCI daemon
>May  1 20:51:25 localhost kernel: Bluetooth: Core ver 2.11
>May  1 20:51:25 localhost kernel: NET: Registered protocol family 31
>May  1 20:51:25 localhost kernel: Bluetooth: HCI device and connection manager initialized
>May  1 20:51:25 localhost kernel: Bluetooth: HCI socket layer initialized
>May  1 20:51:25 localhost hcid[1790]: Starting SDP server
>May  1 20:51:25 localhost kernel: Bluetooth: L2CAP ver 2.9
>May  1 20:51:25 localhost kernel: Bluetooth: L2CAP socket layer initialized
>May  1 20:51:25 localhost hcid[1790]: Created local server at unix:abstract=/var/run/dbus-MzPkpRs7e8,guid=e1d06e6e54225c6370bdb800481a112d
>May  1 20:51:25 localhost kernel: Bluetooth: RFCOMM socket layer initialized
>May  1 20:51:25 localhost kernel: Bluetooth: RFCOMM TTY layer initialized
>May  1 20:51:25 localhost kernel: Bluetooth: RFCOMM ver 1.8
>May  1 20:51:25 localhost input[1809]: Bluetooth Input daemon
>May  1 20:51:25 localhost input[1809]: Registered input manager path:/org/bluez/input
>May  1 20:51:26 localhost ntpd[1837]: ntpd 4.2.4p2@1.1495-o Mon Sep 24 14:40:07 UTC 2007 (1)
>May  1 20:51:26 localhost ntpd[1838]: precision = 1.000 usec
>May  1 20:51:26 localhost ntpd[1838]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
>May  1 20:51:26 localhost ntpd[1838]: Listening on interface #1 wildcard, ::#123 Disabled
>May  1 20:51:26 localhost ntpd[1838]: Listening on interface #2 lo, ::1#123 Enabled
>May  1 20:51:26 localhost ntpd[1838]: Listening on interface #3 lo, 127.0.0.1#123 Enabled
>May  1 20:51:26 localhost ntpd[1838]: kernel time sync status 0040
>May  1 20:51:26 localhost ntpd[1838]: frequency initialized 0.000 PPM from /var/lib/ntp/drift
>May  1 20:51:26 localhost ntpd[1838]: getaddrinfo: "0.fedora.pool.ntp.org" invalid host address, ignored
>May  1 20:51:26 localhost ntpd[1838]: getaddrinfo: "1.fedora.pool.ntp.org" invalid host address, ignored
>May  1 20:51:26 localhost ntpd[1838]: getaddrinfo: "2.fedora.pool.ntp.org" invalid host address, ignored
>May  1 20:51:28 localhost avahi-daemon[1972]: Found user 'avahi' (UID 498) and group 'avahi' (GID 494).
>May  1 20:51:28 localhost avahi-daemon[1972]: Successfully dropped root privileges.
>May  1 20:51:28 localhost avahi-daemon[1972]: avahi-daemon 0.6.21 starting up.
>May  1 20:51:28 localhost avahi-daemon[1972]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
>May  1 20:51:28 localhost avahi-daemon[1972]: Successfully called chroot().
>May  1 20:51:28 localhost avahi-daemon[1972]: Successfully dropped remaining capabilities.
>May  1 20:51:28 localhost avahi-daemon[1972]: Loading service file /services/ssh.service.
>May  1 20:51:28 localhost avahi-daemon[1972]: System host name is set to 'localhost'. This is not a suitable mDNS host name, looking for alternatives.
>May  1 20:51:28 localhost avahi-daemon[1972]: Network interface enumeration completed.
>May  1 20:51:28 localhost avahi-daemon[1972]: Registering HINFO record with values 'I686'/'LINUX'.
>May  1 20:51:28 localhost avahi-daemon[1972]: Server startup complete. Host name is linux.local. Local service cookie is 992588446.
>May  1 20:51:28 localhost avahi-daemon[1972]: Service "linux" (/services/ssh.service) successfully established.
>May  1 20:51:33 localhost acpid: client connected from 2047[68:68]
>May  1 20:51:35 localhost NetworkManager: <info>  starting...
>May  1 20:51:35 localhost NetworkManager: <info>  wlan0: Device is fully-supported using driver 'natsemi'.
>May  1 20:51:35 localhost NetworkManager: <info>  Now managing wired Ethernet (802.3) device 'wlan0'.
>May  1 20:51:35 localhost NetworkManager: <info>  Bringing up device wlan0
>May  1 20:51:35 localhost kernel: wlan0: DSPCFG accepted after 0 usec.
>May  1 20:51:35 localhost kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>May  1 20:51:35 localhost NetworkManager: <info>  Deactivating device wlan0.
>May  1 20:51:35 localhost NetworkManager: <info>  (wlan0): exported as /org/freedesktop/Hal/devices/net_00_0b_cd_7a_44_8f
>May  1 20:51:35 localhost NetworkManager: <info>  Trying to start the supplicant...
>May  1 20:51:35 localhost NetworkManager: <info>  Trying to start the system settings daemon...
>May  1 20:51:35 localhost NetworkManager: <info>  (wlan0) supplicant interface is now in state 1 (from 0).
>May  1 20:51:35 localhost NetworkManager: <info>  (wlan0) supplicant interface is now in state 2 (from 1).
>May  1 20:51:36 localhost init: open(/dev/pts/0): No such file or directory
>May  1 20:51:38 localhost init:last message repeated 5 times
>May  1 20:51:38 localhost pcscd: winscard.c:219:SCardConnect() Reader E-Gate 0 0 Not Found
>May  1 20:51:38 localhost pcscd:last message repeated 3 times
>May  1 20:51:38 localhost acpid: client connected from 2245[0:0]
>May  1 20:51:39 localhost kernel: agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>May  1 20:51:39 localhost kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>May  1 20:51:39 localhost kernel: agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode
>May  1 20:51:40 localhost kernel: [drm] Setting GART location based on new memory map
>May  1 20:51:40 localhost kernel: [drm] writeback test succeeded in 1 usecs
>May  1 20:52:02 localhost gdm-binary[2240]: GLib-WARNING: In call to g_spawn_sync(), exit status of a child process was requested but SIGCHLD action was set to SIG_IGN and ECHILD was received by waitpid(), so exit status can't be returned. This is a bug in the program calling g_spawn_sync(); either don't request the exit status, or don't set the SIGCHLD action.
>May  1 20:52:08 localhost gconfd (root-2338): (Version 2.20.1) wird gestartet, Prozesskennung 2338, Benutzer Â»rootÂ«
>May  1 20:52:08 localhost gconfd (root-2338): Die Adresse Â»xml:readonly:/etc/gconf/gconf.xml.mandatoryÂ« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelÃ¶st
>May  1 20:52:08 localhost gconfd (root-2338): Die Adresse Â»xml:readwrite:/root/.gconfÂ« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelÃ¶st
>May  1 20:52:08 localhost gconfd (root-2338): Die Adresse Â»xml:readonly:/etc/gconf/gconf.xml.defaultsÂ« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelÃ¶st
>May  1 20:52:12 localhost pulseaudio[2346]: main.c: This program is not intended to be run as root (unless --system is specified).
>May  1 20:52:15 localhost hcid[1790]: Default passkey agent (:1.20, /org/bluez/passkey) registered
>May  1 20:52:15 localhost hcid[1790]: Default authorization agent (:1.20, /org/bluez/auth) registered
>May  1 20:52:15 localhost gconfd (root-2338): Die Adresse Â»xml:readwrite:/root/.gconfÂ« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelÃ¶st
>May  1 20:52:18 localhost ntfs-3g[2392]: Version 1.1120
>May  1 20:52:18 localhost ntfs-3g[2392]: Mounted /dev/sda1 (Read-Write, label "", NTFS 3.1)
>May  1 20:52:18 localhost ntfs-3g[2392]: Cmdline options: rw,nosuid,nodev,uhelper=hal,locale=de_DE.UTF-8
>May  1 20:52:18 localhost ntfs-3g[2392]: Mount options: rw,nosuid,nodev,uhelper=hal,silent,allow_other,nonempty,relatime,fsname=/dev/sda1,blkdev,blksize=4096
>May  1 20:52:18 localhost hald: mounted /dev/sda1 on behalf of uid 0
>May  1 20:53:10 localhost system-config-network[2492]: rm //etc/sysconfig/networking/profiles//default/resolv.conf
>May  1 20:53:10 localhost system-config-network[2492]: ln //etc/resolv.conf //etc/sysconfig/networking/profiles//default/resolv.conf
>May  1 20:55:02 localhost kernel: usb 1-1: new full speed USB device using ohci_hcd and address 3
>May  1 20:55:02 localhost kernel: usb 1-1: configuration #1 chosen from 1 choice
>May  1 20:55:03 localhost kernel: Registered led device: rt73usb-phy0:radio
>May  1 20:55:03 localhost kernel: Registered led device: rt73usb-phy0:assoc
>May  1 20:55:03 localhost kernel: Registered led device: rt73usb-phy0:quality
>May  1 20:55:03 localhost kernel: usbcore: registered new interface driver rt73usb
>********************************************************************************************************************************************
>/var/log/wpasupplicantlog is empty
>********************************************************************************************************************************************
>/etc/rsyslog.conf
>********************************************************************************************************************************************
># Log all kernel messages to the console.
># Logging much else clutters up the screen.
>#kern.*                                                 /dev/console
>
># :msg, contains, "0x06"  		 		~ 
># :msg, contains, "0x07"  		 		~ 
>		 
># Log anything (except mail) of level info or higher.
># Don't log private authentication messages!
>*.info;mail.none;authpriv.none;cron.none                /var/log/messages
>
># The authpriv file has restricted access.
>authpriv.*                                              /var/log/secure
>
># Log all the mail messages in one place.
>mail.*                                                  -/var/log/maillog
>
>
># Log cron stuff
>cron.*                                                  /var/log/cron
>
># Everybody gets emergency messages
>*.emerg                                                 *
>
># Save news errors of level crit and higher in a special file.
>uucp,news.crit                                          /var/log/spooler
>
># Save boot messages also to boot.log
>local7.*                                                /var/log/boot.log
>********************************************************************************************************************************************
>/var/log/boot.log is empty
>********************************************************************************************************************************************
>/var/log/secure
>********************************************************************************************************************************************
>May  1 20:48:55 localhost gdm-binary[2375]: pam_unix(gdm:session): session closed for user root
>May  1 20:48:59 localhost sshd[1885]: Received signal 15; terminating.
>May  1 20:51:26 localhost sshd[1823]: Server listening on :: port 22.
>May  1 20:51:26 localhost sshd[1823]: error: Bind to port 22 on 0.0.0.0 failed: Address already in use.
>May  1 20:52:02 localhost gdm-binary[2240]: pam_keyring(gdm:auth): pam_keyring: starting gnome-keyring-daemon
>May  1 20:52:02 localhost gdm-binary[2240]: pam_keyring(gdm:auth): pam_keyring: unlocking keyring
>May  1 20:52:02 localhost gdm-binary[2240]: pam_keyring(gdm:auth): pam_keyring: going to execute /usr/libexec/pam-keyring-tool -u -s
>May  1 20:52:02 localhost gdm-binary[2240]: pam_keyring(gdm:auth): pam_keyring: PASSWORD successfully unlocked the default keyring
>May  1 20:52:02 localhost gdm-binary[2240]: pam_unix(gdm:session): session opened for user root by (uid=0)
>May  1 20:53:06 localhost userhelper[2489]: pam_timestamp(system-config-network:session): updated timestamp file `/var/run/sudo/root/unknown'
>May  1 20:53:06 localhost userhelper[2492]: running '/usr/sbin/system-config-network ' with root privileges on behalf of 'root'
>********************************************************************************************************************************************
>The output of ifconfig -a and iwconfig. Note that wlan0, as NetworkManager caused it to rename, is the lan interface with the natsemi driver and with no lan-cable plugged in (The laptop connects, when the cable is plugged in): 
>********************************************************************************************************************************************
>[root@localhost ~]# ifconfig -a
>lo        Link encap:Lokale Schleife  
>          inet Adresse:127.0.0.1  Maske:255.0.0.0
>          inet6 Adresse: ::1/128 GÃ¼ltigkeitsbereich:Maschine
>          UP LOOPBACK RUNNING  MTU:16436  Metric:1
>          RX packets:3025 errors:0 dropped:0 overruns:0 frame:0
>          TX packets:3025 errors:0 dropped:0 overruns:0 carrier:0
>          Kollisionen:0 SendewarteschlangenlÃ¤nge:0 
>          RX bytes:2560080 (2.4 MiB)  TX bytes:2560080 (2.4 MiB)
>
>wlan0     Link encap:Ethernet  Hardware Adresse 00:0B:CD:7A:44:8F  
>          UP BROADCAST MULTICAST  MTU:1500  Metric:1
>          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>          Kollisionen:0 SendewarteschlangenlÃ¤nge:1000 
>          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
>          Interrupt:11 Basisadresse:0xe000 
>
>[root@localhost ~]# iwconfig
>lo        no wireless extensions.
>
>wlan0     no wireless extensions.
>
>[root@localhost ~]# 
>

Actions: View

Attachments on bug 439685: 301691 | 301692 | 301693 | 302035 | 302069 | 304361