Attachment 304430 Details for Bug 443855 – dmesg without printer attached

dmesg without printer attached

dmesg-without-printer (text/plain), 24.12 KB, created by Gus Wirth on 2008-05-02 22:59:13 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gus Wirth

Created: 2008-05-02 22:59:13 UTC

Size: 24.12 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24.4-64.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sat Mar 29 09:54:46 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f5520
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 262128) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262128
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   262128
>On node 0 totalpages: 262128
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 255 pages used for memmap
>  HighMem zone: 32497 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP 000F6F00, 0014 (r0 AWARD )
>ACPI: RSDT 3FFF3000, 002C (r1 AWARD  AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 3FFF3040, 0074 (r1 AWARD  AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 3FFF30C0, 3ABB (r1 AWARD  AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 3FFF0000, 0040
>ACPI: APIC 3FFF6B80, 005A (r1 AWARD  AWRDACPI 42302E31 AWRD        0)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:12 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260081
>Kernel command line: ro root=LABEL=/
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07bb000 soft=c079b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1599.602 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1031092k/1048512k available (2237k kernel code, 16656k reserved, 1131k data, 288k init, 131008k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0750000 - 0xc0798000   ( 288 kB)
>      .data : 0xc062f789 - 0xc074a724   (1131 kB)
>      .text : 0xc0400000 - 0xc062f789   (2237 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3199.95 BogoMIPS (lpj=1599978)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 128K (64 bytes/line)
>CPU: After all inits, caps: 078bf3ff e3d3fbff 00000000 00000410 00000001 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: AMD Sempron(tm) Processor 2600+ stepping 02
>Total of 1 processors activated (3199.95 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1680 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 64 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 16:05:48  Date: 05/01/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>system 00:00: iomem range 0xd0000-0xd3fff has been reserved
>system 00:00: iomem range 0xd8800-0xdbfff has been reserved
>system 00:00: iomem range 0xf0000-0xfbfff could not be reserved
>system 00:00: iomem range 0xfc000-0xfffff could not be reserved
>system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved
>system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved
>system 00:00: iomem range 0xffee0000-0xffefffff has been reserved
>system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved
>system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved
>system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x800-0x805 has been reserved
>system 00:02: ioport range 0x290-0x297 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: ec000000-edffffff
>  PREFETCH window: e8000000-ebffffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3095k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1209657947.509:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key A149FFC6EE301D40
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI: Thermal Zone [THRM] (40 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected AGP bridge 0
>agpgart: AGP aperture is 64M @ 0xe4000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Power state transitions not supported
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 8:277:84
>Freeing unused kernel memory: 288k freed
>Write protecting the kernel read-only data: 894k
>ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 16
>ehci_hcd 0000:00:03.3: EHCI Host Controller
>ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
>PCI: cache line size of 64 is not supported by device 0000:00:03.3
>ehci_hcd 0000:00:03.3: irq 16, io mem 0xee022000
>ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 17
>ohci_hcd 0000:00:03.0: OHCI Host Controller
>ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:03.0: irq 17, io mem 0xee024000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 18
>ohci_hcd 0000:00:03.1: OHCI Host Controller
>ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:03.1: irq 18, io mem 0xee020000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 19
>ohci_hcd 0000:00:03.2: OHCI Host Controller
>ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:03.2: irq 19, io mem 0xee021000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>USB Universal Host Controller Interface driver v3.0
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 20
>ACPI: PCI interrupt for device 0000:00:05.0 disabled
>pata_sis 0000:00:02.5: version 0.5.2
>scsi0 : pata_sis
>scsi1 : pata_sis
>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
>ata1.00: ATA-6: IC35L060AVV207-0, V22OA66A, max UDMA/100
>ata1.00: 120103200 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2.01: ATAPI: Optiarc DVD RW AD-7190A, 1.01, max UDMA/66
>ata2.01: configured for UDMA/66
>scsi 0:0:0:0: Direct-Access     ATA      IC35L060AVV207-0 V22O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 120103200 512-byte hardware sectors (61493 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 120103200 512-byte hardware sectors (61493 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:1:0: CD-ROM            Optiarc  DVD RW AD-7190A  1.01 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 21
>scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
>        <Adaptec 2940 SCSI adapter>
>        aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
>
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>scsi 2:0:2:0: Processor         HP       C2520A           3503 PQ: 0 ANSI: 2
> target2:0:2: Beginning Domain Validation
> target2:0:2: Ending Domain Validation
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:8192 avtab hash slots allocated.Num of rules:219040
>SELinux:8192 avtab hash slots allocated.Num of rules:219040
>security:  8 users, 12 roles, 2385 types, 114 bools, 1 sens, 1024 cats
>security:  67 classes, 219040 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>audit(1209657978.917:2): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:1:0: Attached scsi generic sg1 type 5
>scsi 2:0:2:0: Attached scsi generic sg2 type 3
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:1:0: Attached scsi CD-ROM sr0
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [FUTS]
>sata_sis 0000:00:05.0: version 1.0
>ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 20
>sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
>scsi3 : sata_sis
>sis900.c: v1.08.10 Apr. 2 2006
>scsi4 : sata_sis
>ata3: SATA max UDMA/133 cmd 0xe300 ctl 0xe400 bmdma 0xe700 irq 20
>ata4: SATA max UDMA/133 cmd 0xe500 ctl 0xe600 bmdma 0xe708 irq 20
>Floppy drive(s): fd0 is 1.44M
>input: PC Speaker as /class/input/input6
>FDC 0 is a post-1991 82077
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ata3.00: ATA-7: ST3500630A, 3.AAE, max UDMA/100
>ata3.00: 976773168 sectors, multi 16: LBA48 
>ata3.00: applying bridge limits
>parport0: Legacy device
>ata3.00: configured for UDMA/100
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 3:0:0:0: Direct-Access     ATA      ST3500630A       3.AA PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 3:0:0:0: [sdb] Attached SCSI disk
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 21
>0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
>0000:00:04.0: Using transceiver found at address 1 as default
>eth0: SiS 900 PCI Fast Ethernet at 0xe200, IRQ 21, 00:14:2a:46:65:b7
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 22
>eth1: RTL8110s at 0xf881e000, 00:40:f4:eb:c6:d9, XID 04000000 IRQ 22
>pata_via 0000:00:0a.0: version 0.3.3
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 23
>scsi5 : pata_via
>scsi6 : pata_via
>ata5: PATA max UDMA/133 cmd 0xe800 ctl 0xe900 bmdma 0xec00 irq 23
>ata6: PATA max UDMA/133 cmd 0xea00 ctl 0xeb00 bmdma 0xec08 irq 23
>ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 23
>intel8x0_measure_ac97_clock: measured 50897 usecs
>intel8x0: clocking to 48000
>udev: renamed network interface eth0 to eth1
>udev: renamed network interface eth1_rename to eth0
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda7, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda8, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda6, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda9, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda9, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 514040k swap on /dev/sda5.  Priority:-1 extents:1 across:514040k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>r8169: eth0: link up
>r8169: eth0: link up
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>audit(1209658001.053:3): audit_pid=1726 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 22
>ppdev: user-space parallel port driver
>ppdev0: registered pardevice
>sysctl table check failed: /dev/parport/parport0/devices/ppdev0/timeslice  Sysctl already exists
>Pid: 2479, comm: xsane Not tainted 2.6.24.4-64.fc8 #1
> [<c0442bef>] set_fail+0x3b/0x43
> [<c0443006>] sysctl_check_table+0x40f/0x460
> [<c04352d5>] sysctl_head_finish+0x18/0x22
> [<c044301a>] sysctl_check_table+0x423/0x460
> [<c04352d5>] sysctl_head_finish+0x18/0x22
> [<c044301a>] sysctl_check_table+0x423/0x460
> [<c04352d5>] sysctl_head_finish+0x18/0x22
> [<c044301a>] sysctl_check_table+0x423/0x460
> [<c04352d5>] sysctl_head_finish+0x18/0x22
> [<c044301a>] sysctl_check_table+0x423/0x460
> [<c04352d5>] sysctl_head_finish+0x18/0x22
> [<c044301a>] sysctl_check_table+0x423/0x460
> [<c043429d>] sysctl_set_parent+0x19/0x2a
> [<c0435536>] register_sysctl_table+0x45/0x7e
> [<f89f0294>] parport_device_proc_register+0xa2/0xbc [parport]
> [<f89eeb1b>] parport_register_device+0x1bb/0x20c [parport]
> [<f89d96ff>] pp_ioctl+0x13b/0x700 [ppdev]
> [<f89d91c6>] pp_irq+0x0/0x45 [ppdev]
> [<c04930cc>] do_ioctl+0x4c/0x62
> [<c0493319>] vfs_ioctl+0x237/0x249
> [<c0493370>] sys_ioctl+0x45/0x5d
> [<c04051da>] syscall_call+0x7/0xb
> =======================
>ppdev0: registered pardevice
>ppdev0: negotiated back to compatibility mode because user-space forgot
>ppdev0: released pardevice because user-space forgot
>ppdev0: unregistered pardevice
>parport0: ppdev0 forgot to release port
>ppdev0: unregistered pardevice
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>APIC error on CPU0: 00(40)
>APIC error on CPU0: 40(40)
>cdrom: This disc doesn't have any tracks I recognize!
>APIC error on CPU0: 40(40)
>APIC error on CPU0: 40(40)
>APIC error on CPU0: 40(40)
>APIC error on CPU0: 40(40)
>APIC error on CPU0: 40(40)
>APIC error on CPU0: 40(40)
>APIC error on CPU0: 40(40)
>SELinux:8192 avtab hash slots allocated.Num of rules:219146
>SELinux:8192 avtab hash slots allocated.Num of rules:219146
>security:  8 users, 12 roles, 2385 types, 115 bools, 1 sens, 1024 cats
>security:  67 classes, 219146 rules
>SELinux: policy loaded with handle_unknown=allow
>SELinux:8192 avtab hash slots allocated.Num of rules:219146
>SELinux:8192 avtab hash slots allocated.Num of rules:219146
>security:  8 users, 12 roles, 2385 types, 115 bools, 1 sens, 1024 cats
>security:  67 classes, 219146 rules
>SELinux: policy loaded with handle_unknown=allow
>SELinux:8192 avtab hash slots allocated.Num of rules:219146
>SELinux:8192 avtab hash slots allocated.Num of rules:219146
>security:  8 users, 12 roles, 2385 types, 115 bools, 1 sens, 1024 cats
>security:  67 classes, 219146 rules
>SELinux: policy loaded with handle_unknown=allow
>audit(1209749494.847:226): audit_pid=0 old=1726 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>audit(1209749496.910:227): audit_pid=13784 old=0 by auid=500 subj=unconfined_u:system_r:auditd_t:s0
>APIC error on CPU0: 40(40)
>UDP: short packet: From 209.222.2.2:6574 34813/71 to 192.168.1.200:42807
>APIC error on CPU0: 40(40)
>APIC error on CPU0: 40(40)
>APIC error on CPU0: 40(40)
>ppdev0: registered pardevice
>ppdev0: unregistered pardevice
>ppdev0: registered pardevice
>ppdev0: unregistered pardevice

Actions: View

Attachments on bug 443855: 304315 | 304316 | 304318 | 304430