Attachment 304431 Details for Bug 445049 – Full dmesg

Full dmesg

log.log (text/plain), 33.39 KB, created by Andy Lawrence on 2008-05-02 22:59:46 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andy Lawrence

Created: 2008-05-02 22:59:46 UTC

Size: 33.39 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-14.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Thu May 1 06:06:21 EDT 2008
>Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
> BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
> BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
> BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
> BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 158) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524000) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.5 present.
>ACPI: RSDP 000F7860, 0014 (r0 IntelR)
>ACPI: RSDT 7FEE3000, 0034 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 7FEE3080, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 7FEE3100, 4D0B (r1 INTELR AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 7FEE0000, 0040
>ACPI: MCFG 7FEE7F00, 003C (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC 7FEE7E40, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: SSDT 7FEE85A0, 0380 (r1  PmRef    CpuPm     3000 INTL 20041203)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007fee0000
>Entering add_active_range(0, 0, 158) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524000) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007fee0000
>  NODE_DATA [000000000000c000 - 0000000000013fff]
>  bootmap [0000000000014000 -  0000000000023fdf] pages 10
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-75db3b] TEXT DATA BSS
>early res: 3 [37c84000-37fefa58] RAMDISK
>early res: 4 [9e000-adfff] EBDA
>early res: 5 [8000-bfff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      158
>    0:      256 ->   524000
>On node 0 totalpages: 523902
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1398 pages reserved
>  DMA zone: 2544 pages, LIFO batch:0
>  DMA32 zone: 7108 pages used for memmap
>  DMA32 zone: 512796 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009e000 - 000000000009f000
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 45232 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515340
>Policy zone: DMA32
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 3059.948 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2057444k/2096000k available (2656k kernel code, 38164k reserved, 1396k data, 356k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>Calibrating delay using timer specific routine.. 6122.33 BogoMIPS (lpj=3061168)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 21249640
>Detected 21.249 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6119.75 BogoMIPS (lpj=3059875)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=6272 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>net_namespace: 1016 bytes
>Time: 22:17:23  Date: 05/02/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000 - efffffff
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *5 7 9 10 11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 4 5 *7 9 10 11 12)
>ACPI: PCI Interrupt Link [LNK1] (IRQs *4 5 7 9 10 11 12)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:parse DMAR table failure.
>PCI-GART: No AMD northbridge found.
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0x880-0x88f has been reserved
>system 00:09: ioport range 0x400-0x4bf could not be reserved
>system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:0d: iomem range 0xf0000-0xfffff could not be reserved
>system 00:0d: iomem range 0x7ff00000-0x7fffffff has been reserved
>system 00:0d: iomem range 0x7fee0000-0x7fefffff could not be reserved
>system 00:0d: iomem range 0x0-0x9ffff could not be reserved
>system 00:0d: iomem range 0x100000-0x7fedffff could not be reserved
>system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0d: iomem range 0xfed14000-0xfed1dfff has been reserved
>system 00:0d: iomem range 0xfed20000-0xfed9ffff has been reserved
>system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0d: iomem range 0xffb00000-0xffb7ffff has been reserved
>system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved
>system 00:0d: iomem range 0xe0000-0xeffff has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: d000-dfff
>  MEM window: 0xf8000000-0xfbffffff
>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: c000-cfff
>  MEM window: 0xfde00000-0xfdefffff
>  PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff
>PCI: Bridge: 0000:00:1c.4
>  IO window: b000-bfff
>  MEM window: 0xfda00000-0xfdafffff
>  PREFETCH window: 0x00000000fd900000-0x00000000fd9fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: a000-afff
>  MEM window: 0xfdd00000-0xfddfffff
>  PREFETCH window: 0x00000000fdc00000-0x00000000fdcfffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3502k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1209766643.391:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>Allocate Port Service[0000:00:1c.4:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7FEE7F80, 022A (r1  PmRef  Cpu0Ist     3000 INTL 20041203)
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: SSDT 7FEE8440, 0152 (r1  PmRef  Cpu1Ist     3000 INTL 20041203)
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI Error (dswstate-0226): No result objects! State=ffff81007e27b800 [20070126]
>ACPI Exception (dsutils-0642): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070126]
>ACPI Exception (dsutils-0735): AE_AML_NO_RETURN_VALUE, While creating Arg 1 [20070126]
>ACPI Error (psparse-0537): Method parse/execution failed [\_TZ_.THRM._TMP] (Node ffff81007fb3e900), AE_AML_NO_RETURN_VALUE
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 8:197:299
>Freeing unused kernel memory: 356k freed
>Write protecting the kernel read-only data: 1120k
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-14.fc9.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-14.fc9.x86_64 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1a.2 to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1a.2
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.2
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd100 irq 19
>ata2: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd180 irq 19
>ata3: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd200 irq 19
>ata4: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd280 irq 19
>ata5: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd300 irq 19
>ata6: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd380 irq 19
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L08, max UDMA/100, ATAPI AN
>ata1.00: configured for UDMA/100
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-7: ST380811AS, 3.AAE, max UDMA/133
>ata2.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata2.00: configured for UDMA/133
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: CD-ROM            LITE-ON  DVDRW LH-20A1S   9L08 PQ: 0 ANSI: 5
>scsi 1:0:0:0: Direct-Access     ATA      ST380811AS       3.AA PQ: 0 ANSI: 5
>sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 1:0:0:0: [sda] Attached SCSI disk
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>scsi6 : ahci
>scsi7 : ahci
>ata7: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 16
>ata8: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 16
>ata7: SATA link down (SStatus 0 SControl 300)
>ata8: SATA link down (SStatus 0 SControl 300)
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1209766660.139:2): selinux=0 auid=4294967295 ses=4294967295
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ACPI: Power Button (CM) [PWRB]
>ACPI: \_SB_.PCI0.PEX4.JMB0.IDE0.PRI0: found ejectable bay
>ACPI: \_SB_.PCI0.PEX4.JMB0.IDE0.PRI0: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.PEX4.JMB0.IDE0.PRI0] Added
>ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.1 to 64
>ACPI: PCI interrupt for device 0000:03:00.1 disabled
>input: PC Speaker as /devices/platform/pcspkr/input/input5
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 23 (level, low) -> IRQ 23
>eth0: RTL8169sc/8110sc at 0xffffc2000033e000, 00:50:8d:bb:de:d8, XID 18000000 IRQ 23
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 22 (level, low) -> IRQ 22
>eth1: RTL8169sc/8110sc at 0xffffc20000342000, 00:50:8d:bb:de:d9, XID 18000000 IRQ 22
>ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.1 to 64
>scsi8 : pata_jmicron
>scsi9 : pata_jmicron
>ata9: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 17
>ata10: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 17
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 18 (level, low) -> IRQ 18
>ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 23 (level, low) -> IRQ 23
>ath5k_pci 0000:04:04.0: registered as 'phy0'
>phy0: Selected rate control algorithm 'pid'
>ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
>ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 21
>firewire_ohci: Added fw-ohci device 0000:04:02.0, OHCI version 1.10
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x1
>ALSA sound/pci/hda/hda_codec.c:2236: hda_codec: model '6stack-dig' is selected for config 147b:1083 (Abit IP35-PRO)
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Line-Out Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Switch, skipped
>firewire_core: created device fw0: GUID 00508d0000b80276, S400
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>mtrr: base(0xd0000000) is not aligned on a size(0xff00000) boundary
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>fuse init (API version 7.9)
>w83627ehf: Found W83627DHG chip at 0x290
>coretemp coretemp.0: Using relative temperature scale!
>coretemp coretemp.1: Using relative temperature scale!
>mtrr: no MTRR for d0000000,ff00000 found
>mtrr: base(0xd0000000) is not aligned on a size(0xff00000) boundary
>r8169: eth1: link up
>r8169: eth1: link up
>r8169: eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:e0:98:f9:13:a0
>wlan0: authenticate with AP 00:e0:98:f9:13:a0
>wlan0: RX authentication from 00:e0:98:f9:13:a0 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:e0:98:f9:13:a0
>wlan0: RX AssocResp from 00:e0:98:f9:13:a0 (capab=0x461 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:e0:98:f9:13:a0)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>wlan0: No ProbeResp from current AP 00:e0:98:f9:13:a0 - assume out of range
>eth1: no IPv6 routers present
>wlan0: no IPv6 routers present
>wlan0: RX deauthentication from 00:e0:98:f9:13:a0 (reason=2)
>wlan0: deauthenticated
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: Found 2 processor cores.
>vboxdrv: fAsync=0 u64DiffCores=3285.
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 1.6.0 (interface 0x00070001).
>NetworkManager: Corrupted page table at address 7f953869e848
>PGD 71dc2067 PUD 71dc3067 PMD 71dc4067 PTE 8000800077c61067
>Bad pagetable: 000d [1] SMP 
>CPU 0 
>Modules linked in: vboxdrv nfs lockd nfs_acl coretemp w83627ehf hwmon_vid hwmon fuse sunrpc ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables loop dm_multipath ipv6 snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event arc4 ecb snd_seq crypto_blkcipher snd_seq_device snd_pcm_oss snd_mixer_oss ath5k snd_pcm snd_timer mac80211 snd_page_alloc firewire_ohci i2c_i801 snd_hwdep pata_jmicron r8169 firewire_core pcspkr cfg80211 pata_acpi crc_itu_t i2c_core bay snd ata_generic button iTCO_wdt iTCO_vendor_support soundcore sr_mod cdrom sg floppy dm_snapshot dm_zero dm_mirror dm_mod ahci libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
>Pid: 2235, comm: NetworkManager Not tainted 2.6.25-14.fc9.x86_64 #1
>RIP: 0033:[<00000036c8ef2165>]  [<00000036c8ef2165>]
>RSP: 002b:00007fff406bd018  EFLAGS: 00010246
>RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffffffffff
>RDX: 0000000000001770 RSI: 0000000000000003 RDI: 0000000000000000
>RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001
>R10: 0000000000000001 R11: 0000000000000206 R12: 00000000011389f0
>R13: 00000000011389f0 R14: 0000000000000001 R15: 000000000065a980
>FS:  00007f953869e780(0000) GS:ffffffff813f6000(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: 00007f953869e848 CR3: 0000000071cb3000 CR4: 00000000000006e0
>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>Process NetworkManager (pid: 2235, threadinfo ffff810071dca000, task ffff810071dc8000)
>
>RIP  [<00000036c8ef2165>]
> RSP <00007fff406bd018>
>---[ end trace ef51479770fd9cdc ]---
>NetworkManager: Corrupted page table at address 7f953869e810
>PGD 71dc2067 PUD 71dc3067 PMD 71dc4067 PTE 8000800077c61067
>Bad pagetable: 000b [2] SMP 
>CPU 0 
>Modules linked in: vboxdrv nfs lockd nfs_acl coretemp w83627ehf hwmon_vid hwmon fuse sunrpc ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables loop dm_multipath ipv6 snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event arc4 ecb snd_seq crypto_blkcipher snd_seq_device snd_pcm_oss snd_mixer_oss ath5k snd_pcm snd_timer mac80211 snd_page_alloc firewire_ohci i2c_i801 snd_hwdep pata_jmicron r8169 firewire_core pcspkr cfg80211 pata_acpi crc_itu_t i2c_core bay snd ata_generic button iTCO_wdt iTCO_vendor_support soundcore sr_mod cdrom sg floppy dm_snapshot dm_zero dm_mirror dm_mod ahci libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
>Pid: 2235, comm: NetworkManager Tainted: G      D  2.6.25-14.fc9.x86_64 #1
>RIP: 0010:[<ffffffff811326a0>]  [<ffffffff811326a0>] __put_user_4+0x20/0x30
>RSP: 0000:ffff810071dcbcd0  EFLAGS: 00010202
>RAX: 0000000000402144 RBX: ffff810071dc8000 RCX: 00007f953869e810
>RDX: 0000000000000000 RSI: ffff8100759d6000 RDI: 00007f953869e810
>RBP: ffff810071dcbcf8 R08: ffff810071dca000 R09: ffffffff81443ac8
>R10: ffffffff81363c64 R11: ffff810071dcbd28 R12: 0000000000000000
>R13: ffff8100759d6000 R14: 0000000000000246 R15: 0000000000000000
>FS:  0000000000000000(0000) GS:ffffffff813f6000(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: 00007f953869e810 CR3: 0000000071cb3000 CR4: 00000000000006e0
>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>Process NetworkManager (pid: 2235, threadinfo ffff810071dca000, task ffff810071dc8000)
>Stack:  ffffffff810322b2 ffff810071c8b800 ffff8100759d6000 ffff810071dc8000
> 0000000000000009 ffff810071dcbd28 ffffffff81035fd2 ffff810071dc8000
> 0000000000000246 ffff810071dc8000 0000000000000009 ffff810071dcbd78
>Call Trace:
> [<ffffffff810322b2>] ? mm_release+0x70/0x90
> [<ffffffff81035fd2>] exit_mm+0x1f/0xfa
> [<ffffffff81037b7a>] do_exit+0x27f/0x656
> [<ffffffff81292a7d>] oops_begin+0x0/0x90
> [<ffffffff81021bd4>] pgtable_bad+0x94/0x9d
> [<ffffffff8129430e>] do_page_fault+0x383/0x89a
> [<ffffffff8100b9a5>] ? do_notify_resume+0x89a/0x8d6
> [<ffffffff81047b03>] ? autoremove_wake_function+0x0/0x38
> [<ffffffff812906c8>] ? thread_return+0x63/0xa7
> [<ffffffff8106d214>] ? audit_syscall_exit+0x331/0x353
> [<ffffffff812924e9>] error_exit+0x0/0x51
>
>
>Code: 48 ff c9 eb 62 66 0f 1f 44 00 00 65 4c 8b 04 25 10 00 00 00 49 81 e8 d8 1f 00 00 48 83 c1 03 72 0f 49 3b 48 20 73 09 48 83 e9 03 <89> 11 31 c0 c3 48 83 e9 03 eb 31 0f 1f 44 00 00 65 4c 8b 04 25 
>RIP  [<ffffffff811326a0>] __put_user_4+0x20/0x30
> RSP <ffff810071dcbcd0>
>---[ end trace ef51479770fd9cdc ]---
>Fixing recursive fault but reboot is needed!

Actions: View

Attachments on bug 445049: 304431 | 306684