Attachment 304744 Details for Bug 445353 – Syslog from /tmp/syslog if it gives any help

Syslog from /tmp/syslog if it gives any help

syslog (text/plain), 26.15 KB, created by Johannes Berg on 2008-05-07 07:54:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Johannes Berg

Created: 2008-05-07 07:54:34 UTC

Size: 26.15 KB

patch

obsolete

><6>Initializing cgroup subsys cpuset
><6>Initializing cgroup subsys cpu
><5>Linux version 2.6.25-0.234.rc9.git1.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080404 (Red Hat 4.3.0-6) (GCC) ) #1 SMP Tue Apr 15 18:02:48 EDT 2008
><6>Command line: initrd=initrd.img BOOT_IMAGE=vmlinuz 
><6>BIOS-provided physical RAM map:
><6> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
><6> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
><6> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
><6> BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable)
><6> BIOS-e820: 000000007ffc0000 - 000000007ffce000 (ACPI data)
><6> BIOS-e820: 000000007ffce000 - 000000007fff0000 (ACPI NVS)
><6> BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
><6> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
><6> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
><6> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
><7>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 524224) 1 entries of 3200 used
><6>end_pfn_map = 1048576
><6>DMI present.
><4>ACPI: RSDP 000FB810, 0014 (r0 ACPIAM)
><4>ACPI: RSDT 7FFC0000, 003C (r1 A_M_I_ OEMRSDT   9000713 MSFT       97)
><4>ACPI: FACP 7FFC0200, 0084 (r2 A_M_I_ OEMFACP   9000713 MSFT       97)
><4>ACPI: DSDT 7FFC0440, 5288 (r1  A0626 A0626000        0 INTL  2002026)
><4>ACPI: FACS 7FFCE000, 0040
><4>ACPI: APIC 7FFC0390, 0070 (r1 A_M_I_ OEMAPIC   9000713 MSFT       97)
><4>ACPI: MCFG 7FFC0400, 003C (r1 A_M_I_ OEMMCFG   9000713 MSFT       97)
><4>ACPI: OEMB 7FFCE040, 0060 (r1 A_M_I_ AMI_OEM   9000713 MSFT       97)
><4>ACPI: HPET 7FFC56D0, 0038 (r1 A_M_I_ OEMHPET0  9000713 MSFT       97)
><4>ACPI: SSDT 7FFC5710, 028A (r1 A_M_I_ POWERNOW        1 AMD         1)
><6>Scanning NUMA topology in Northbridge 24
><6>No NUMA configuration found
><6>Faking a node at 0000000000000000-000000007ffc0000
><7>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 524224) 1 entries of 3200 used
><6>Bootmem setup node 0 0000000000000000-000000007ffc0000
><6>  NODE_DATA [000000000000c000 - 0000000000013fff]
><6>  bootmap [0000000000014000 -  0000000000023ff7] pages 10
><6>early res: 0 [0-fff] BIOS data page
><6>early res: 1 [6000-7fff] SMP_TRAMPOLINE
><6>early res: 2 [200000-75873b] TEXT DATA BSS
><6>early res: 3 [7f625000-7ff9fdad] RAMDISK
><6>early res: 4 [9fc00-a0bff] EBDA
><6>early res: 5 [8000-bfff] PGTABLE
><7> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
><7> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
><7> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
><7> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
><7> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
><7> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
><7> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
><7> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
><7> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
><7> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
><7> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
><7> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
><7> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
><7> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  DMA32        4096 ->  1048576
><4>  Normal    1048576 ->  1048576
><4>Movable zone start PFN for each node
><4>early_node_map[2] active PFN ranges
><4>    0:        0 ->      159
><4>    0:      256 ->   524224
><7>On node 0 totalpages: 524127
><7>  DMA zone: 56 pages used for memmap
><7>  DMA zone: 1378 pages reserved
><7>  DMA zone: 2565 pages, LIFO batch:0
><7>  DMA32 zone: 7111 pages used for memmap
><7>  DMA32 zone: 513017 pages, LIFO batch:31
><7>  Normal zone: 0 pages used for memmap
><7>  Movable zone: 0 pages used for memmap
><6>Detected use of extended apic ids on hypertransport bus
><6>ACPI: PM-Timer IO Port: 0x508
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
><6>Processor #0 (Bootup-CPU)
><6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
><6>Processor #1
><6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
><6>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ9 used by override.
><7>ACPI: IRQ14 used by override.
><7>ACPI: IRQ15 used by override.
><6>Setting APIC routing to flat
><6>ACPI: HPET id: 0x10de8201 base: 0xfed00000
><6>Using ACPI (MADT) for SMP configuration information
><6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
><6>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
><6>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
><6>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
><6>SMP: Allowing 2 CPUs, 0 hotplug CPUs
><6>PERCPU: Allocating 43120 bytes of per cpu data
><4>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515582
><4>Policy zone: DMA32
><5>Kernel command line: initrd=initrd.img BOOT_IMAGE=vmlinuz 
><4>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 32768 bytes)
><6>TSC calibrated against PM_TIMER
><4>Marking TSC unstable due to TSCs unsynchronized
><6>time.c: Detected 2511.381 MHz processor.
><7>spurious 8259A interrupt: IRQ7.
><4>Console: colour VGA+ 80x25
><6>console [tty0] enabled
><6>Checking aperture...
><6>Node 0: aperture @ 8e0000000 size 32 MB
><3>Aperture beyond 4GB. Ignoring.
><6>No AGP bridge found
><6>Memory: 2052260k/2096896k available (2646k kernel code, 44248k reserved, 1390k data, 352k init)
><7>CPA: page pool initialized 1 of 1 pages preallocated
><6>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
><7>hpet clockevent registered
><4>Calibrating delay using timer specific routine.. 5026.52 BogoMIPS (lpj=2513261)
><6>Security Framework initialized
><6>SELinux:  Initializing.
><7>SELinux:  Starting in permissive mode
><6>selinux_register_security:  Registering secondary module capability
><6>Capability LSM initialized as secondary
><6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
><6>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
><4>Mount-cache hash table entries: 256
><6>Initializing cgroup subsys ns
><6>Initializing cgroup subsys cpuacct
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 512K (64 bytes/line)
><6>CPU 0/0 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><6>ACPI: Core revision 20070126
><6>Using local APIC timer interrupts.
><7>APIC timer calibration result 12556947
><6>Detected 12.556 MHz APIC timer.
><6>Booting processor 1/2 APIC 0x1
><4>Initializing CPU#1
><4>Calibrating delay using timer specific routine.. 5022.50 BogoMIPS (lpj=2511250)
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 512K (64 bytes/line)
><6>CPU 1/1 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 1
><4>AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 02
><6>Brought up 2 CPUs
><7>sizeof(vma)=176 bytes
><7>sizeof(page)=56 bytes
><7>sizeof(inode)=560 bytes
><7>sizeof(dentry)=208 bytes
><7>sizeof(ext3inode)=760 bytes
><7>sizeof(buffer_head)=104 bytes
><7>sizeof(skbuff)=224 bytes
><7>sizeof(task_struct)=6256 bytes
><7>CPU0 attaching sched-domain:
><7> domain 0: span 00000000,00000003
><7>  groups: 00000000,00000001 00000000,00000002
><7>  domain 1: span 00000000,00000003
><7>   groups: 00000000,00000003
><7>CPU1 attaching sched-domain:
><7> domain 0: span 00000000,00000003
><7>  groups: 00000000,00000002 00000000,00000001
><7>  domain 1: span 00000000,00000003
><7>   groups: 00000000,00000003
><6>net_namespace: 1016 bytes
><4>Time:  9:38:45  Date: 05/07/08
><6>NET: Registered protocol family 16
><6>No dock devices found.
><6>ACPI: bus type pci registered
><7>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
><7>PCI: Not using MMCONFIG.
><6>PCI: Using configuration type 1
><7>ACPI: EC: Look up EC in DSDT
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S1 S3 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><6>PCI: Transparent bridge - 0000:00:04.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
><6>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11
><6>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
><6>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
><6>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
><6>ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
><6>ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
><6>ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
><6>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
><6>ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
><6>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
><6>ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
><6>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
><4>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  22, should be 15 [20070126]
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 16 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><6>NetLabel: Initializing
><6>NetLabel:  domain hash size = 128
><6>NetLabel:  protocols = UNLABELED CIPSOv4
><6>NetLabel:  unlabeled traffic allowed by default
><6>DMAR:parse DMAR table failure.
><6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
><6>hpet0: 3 32-bit timers, 25000000 Hz
><4>ACPI: RTC can wake from S4
><7>Switched to high resolution mode on CPU 0
><7>Switched to high resolution mode on CPU 1
><6>system 00:07: ioport range 0x4d0-0x4d1 has been reserved
><6>system 00:07: ioport range 0x800-0x80f has been reserved
><6>system 00:07: ioport range 0x500-0x57f has been reserved
><6>system 00:07: ioport range 0x580-0x5ff has been reserved
><6>system 00:07: ioport range 0x800-0x87f could not be reserved
><6>system 00:07: ioport range 0x880-0x8ff has been reserved
><6>system 00:07: ioport range 0xd00-0xd7f has been reserved
><6>system 00:07: ioport range 0xd80-0xdff has been reserved
><6>system 00:07: ioport range 0x900-0x97f has been reserved
><6>system 00:07: ioport range 0x980-0x9ff has been reserved
><6>system 00:07: ioport range 0x2000-0x207f has been reserved
><6>system 00:07: ioport range 0x2080-0x20ff has been reserved
><6>system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
><6>system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
><6>system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
><6>system 00:07: iomem range 0xffb80000-0xffffffff could not be reserved
><6>system 00:07: iomem range 0xff300000-0xff3fffff has been reserved
><6>system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
><6>system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
><6>system 00:09: iomem range 0x0-0x0 could not be reserved
><6>system 00:0c: ioport range 0x230-0x23f has been reserved
><6>system 00:0c: ioport range 0x290-0x29f has been reserved
><6>system 00:0c: ioport range 0xa00-0xa0f has been reserved
><6>system 00:0c: ioport range 0xa10-0xa1f has been reserved
><6>system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
><6>system 00:0f: iomem range 0x0-0x9ffff could not be reserved
><6>system 00:0f: iomem range 0xc0000-0xcffff has been reserved
><6>system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
><6>system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
><6>system 00:0f: iomem range 0xff780000-0xffffffff could not be reserved
><6>PCI: Bridge: 0000:00:04.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:09.0
><6>  IO window: e000-efff
><6>  MEM window: 0xdc000000-0xdfffffff
><6>  PREFETCH window: 0x00000000c0000000-0x00000000cfffffff
><6>PCI: Bridge: 0000:00:0b.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:0c.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><7>PCI: Setting latency timer of device 0000:00:04.0 to 64
><7>PCI: Setting latency timer of device 0000:00:09.0 to 64
><7>PCI: Setting latency timer of device 0000:00:0b.0 to 64
><7>PCI: Setting latency timer of device 0000:00:0c.0 to 64
><6>NET: Registered protocol family 2
><6>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
><6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
><6>TCP: Hash tables configured (established 262144 bind 65536)
><6>TCP reno registered
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 9707k freed
><6>audit: initializing netlink socket (disabled)
><5>type=2000 audit(1210153124.617:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><7>SELinux:  Registering netfilter hooks
><6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><6>pci 0000:00:00.0: Enabling HT MSI Mapping
><6>pci 0000:00:04.0: Enabling HT MSI Mapping
><6>pci 0000:00:05.0: Enabling HT MSI Mapping
><6>pci 0000:00:07.0: Enabling HT MSI Mapping
><6>pci 0000:00:08.0: Enabling HT MSI Mapping
><6>pci 0000:00:08.1: Enabling HT MSI Mapping
><6>pci 0000:00:09.0: Enabling HT MSI Mapping
><6>pci 0000:00:0b.0: Enabling HT MSI Mapping
><6>pci 0000:00:0c.0: Enabling HT MSI Mapping
><7>pci 0000:02:00.0: Boot video device
><7>PCI: Setting latency timer of device 0000:00:09.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:09.0:pcie00]
><7>PCI: Setting latency timer of device 0000:00:0b.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:0b.0:pcie00]
><7>PCI: Setting latency timer of device 0000:00:0c.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:0c.0:pcie00]
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>ACPI: ACPI0007:00 is registered as cooling_device0
><6>ACPI: ACPI0007:01 is registered as cooling_device1
><7>hpet_resources: 0xfed00000 is busy
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.103
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>brd: module loaded
><6>input: Macintosh mouse button emulation as /devices/virtual/input/input0
><6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
><6>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
><6>rtc0: alarms up to one year, y3k
><6>cpuidle: using governor ladder
><6>cpuidle: using governor menu
><6>usbcore: registered new interface driver hiddev
><6>usbcore: registered new interface driver usbhid
><6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
><6>TCP cubic registered
><6>Initializing XFRM netlink socket
><6>NET: Registered protocol family 1
><6>NET: Registered protocol family 17
><4>registered taskstats version 1
><4>  Magic number: 8:53:626
><6>Freeing unused kernel memory: 352k freed
><6>Write protecting the kernel read-only data: 1116k
><6>RPC: Registered udp transport module.
><6>RPC: Registered tcp transport module.
><6>loop: module loaded
><6>Floppy drive(s): fd0 is 1.44M
><6>FDC 0 is a post-1991 82077
><6>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
><6>input: PC Speaker as /devices/platform/pcspkr/input/input2
><6>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
><6>squashfs: version 3.3 (2007/10/31) Phillip Lougher
><5>SCSI subsystem initialized
><6>Loading iSCSI transport class v2.0-869.
><5>iscsi: registered transport (tcp)
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
><4>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
><6>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 23
><7>PCI: Setting latency timer of device 0000:00:02.0 to 64
><6>ohci_hcd 0000:00:02.0: OHCI Host Controller
><6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
><6>ohci_hcd 0000:00:02.0: irq 23, io mem 0xdbfff000
><7>libata version 3.00 loaded.
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 10 ports detected
><27>May  7 09:38:46 udevd-event[863]: node_symlink: device node '/dev/rtc' already exists, link to '/dev/rtc0' will not overwrite it
><6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: OHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.x86_64 ohci_hcd
><6>usb usb1: SerialNumber: 0000:00:02.0
><7>pata_amd 0000:00:06.0: version 0.3.10
><7>PCI: Setting latency timer of device 0000:00:06.0 to 64
><6>scsi0 : pata_amd
><6>scsi1 : pata_amd
><6>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
><6>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
><7>ata2: port disabled. ignoring.
><4>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
><6>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22
><7>PCI: Setting latency timer of device 0000:00:02.1 to 64
><6>ehci_hcd 0000:00:02.1: EHCI Host Controller
><6>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
><6>ehci_hcd 0000:00:02.1: debug port 1
><7>PCI: cache line size of 64 is not supported by device 0000:00:02.1
><6>ehci_hcd 0000:00:02.1: irq 22, io mem 0xdbffec00
><6>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 10 ports detected
><6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
><6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: EHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.x86_64 ehci_hcd
><6>usb usb2: SerialNumber: 0000:00:02.1
><4>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
><6>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 21
><7>PCI: Setting latency timer of device 0000:00:08.0 to 64
><6>ACPI: PCI interrupt for device 0000:00:08.0 disabled
><4>ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
><6>ACPI: PCI Interrupt 0000:00:08.1[B] -> Link [LSA1] -> GSI 20 (level, low) -> IRQ 20
><7>PCI: Setting latency timer of device 0000:00:08.1 to 64
><6>ACPI: PCI interrupt for device 0000:00:08.1 disabled
><6>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
><4>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
><6>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LMAC] -> GSI 23 (level, low) -> IRQ 23
><7>PCI: Setting latency timer of device 0000:00:07.0 to 64
><6>forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:1e:8c:9c:fc:c5
><6>forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
><7>sata_nv 0000:00:08.0: version 3.5
><6>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 21
><7>PCI: Setting latency timer of device 0000:00:08.0 to 64
><6>scsi2 : sata_nv
><6>scsi3 : sata_nv
><6>ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 21
><6>ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 21
><6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata3.00: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100
><6>ata3.00: configured for UDMA/100
><6>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>ata4.00: ATA-8: WDC WD2500AAJS-00VTA0, 01.01B01, max UDMA/133
><6>ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
><6>ata4.00: configured for UDMA/133
><5>scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203D  SB00 PQ: 0 ANSI: 5
><5>scsi 3:0:0:0: Direct-Access     ATA      WDC WD2500AAJS-0 01.0 PQ: 0 ANSI: 5
><6>ACPI: PCI Interrupt 0000:00:08.1[B] -> Link [LSA1] -> GSI 20 (level, low) -> IRQ 20
><7>PCI: Setting latency timer of device 0000:00:08.1 to 64
><6>scsi4 : sata_nv
><6>scsi5 : sata_nv
><6>ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 20
><6>ata6: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 20
><6>ata5: SATA link down (SStatus 0 SControl 300)
><6>ata6: SATA link down (SStatus 0 SControl 300)
><4>Driver 'sr' needs updating - please use bus_type methods
><4>sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 2:0:0:0: Attached scsi CD-ROM sr0
><4>Driver 'sd' needs updating - please use bus_type methods
><5>sd 3:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
><5>sd 3:0:0:0: [sda] Write Protect is off
><7>sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 3:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
><5>sd 3:0:0:0: [sda] Write Protect is off
><7>sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda:<5>sr 2:0:0:0: Attached scsi generic sg0 type 5
><5>sd 3:0:0:0: Attached scsi generic sg1 type 0
><4> sda1 sda2 sda3
><5>sd 3:0:0:0: [sda] Attached SCSI disk
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><7>eth0: no IPv6 routers present
><4>ISOFS: Unable to identify CD-ROM format.
><4>VFS: Can't find an ext2 filesystem on dev loop0.
><7>SELinux:8192 avtab hash slots allocated. Num of rules:172102
><7>SELinux:8192 avtab hash slots allocated. Num of rules:172102
><7>security:  5 users, 12 roles, 2300 types, 115 bools, 1 sens, 1024 cats
><7>security:  72 classes, 172102 rules
><7>SELinux:  Completing initialization.
><7>SELinux:  Setting up existing superblocks.
><7>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
><7>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
><7>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><7>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
><7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><7>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
><7>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
><7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><7>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><6>SELinux: policy loaded with handle_unknown=allow
><5>type=1403 audit(1210153154.169:2): policy loaded auid=4294967295 ses=4294967295
><6>md: raid0 personality registered for level 0
><6>md: raid1 personality registered for level 1
><6>xor: automatically using best checksumming function: generic_sse
><6>   generic_sse:  7712.000 MB/sec
><6>xor: using function: generic_sse (7712.000 MB/sec)
><6>async_tx: api initialized (async)
><4>raid6: int64x1   2214 MB/s
><4>raid6: int64x2   2933 MB/s
><4>raid6: int64x4   2234 MB/s
><4>raid6: int64x8   2257 MB/s
><4>raid6: sse2x1    3546 MB/s
><4>raid6: sse2x2    4640 MB/s
><4>raid6: sse2x4    4855 MB/s
><4>raid6: using algorithm sse2x4 (4855 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><6>md: raid10 personality registered for level 10
><6>md: linear personality registered for level -1
><4>GFS2 (built Apr 15 2008 18:05:17) installed
><6>Lock_Nolock (built Apr 15 2008 18:05:42) installed
><6>JFS: nTxBlock = 8192, nTxLock = 65536
><6>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
><6>SGI XFS Quota Management subsystem
><6>device-mapper: uevent: version 1.0.3
><6>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
><6>device-mapper: multipath: version 1.0.5 loaded
><6>device-mapper: multipath round-robin: version 1.0.0 loaded
><6>device-mapper: multipath emc: version 0.0.3 loaded
><4>mtrr: base(0xc0000000) is not aligned on a size(0xff00000) boundary

Actions: View

Attachments on bug 445353: 304741 | 304743 | 304744