Attachment 304992 Details for Bug 445302 – dmesg

dmesg

dmesg (text/plain), 28.53 KB, created by Daniel Benamy on 2008-05-09 22:48:17 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Daniel Benamy

Created: 2008-05-09 22:48:17 UTC

Size: 28.53 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-14.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Thu May 1 06:06:21 EDT 2008
>Command line: ro root=UUID=fac3b3c7-736f-4464-8607-e2106245cd60 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000097000 (usable)
> BIOS-e820: 0000000000097000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
> BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
> BIOS-e820: 000000003ffbe000 - 000000003fff0000 (ACPI NVS)
> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 151) 0 entries of 3200 used
>Entering add_active_range(0, 256, 262064) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI present.
>ACPI: RSDP 000F8E50, 0014 (r0 ACPIAM)
>ACPI: RSDT 3FFB0000, 0034 (r1 M S I  OEMRSDT   1000705 MSFT       97)
>ACPI: FACP 3FFB0200, 0084 (r2 M S I  OEMFACP   1000705 MSFT       97)
>ACPI: DSDT 3FFB0440, 5A5B (r1  0AAAA 0AAAA000        0 INTL 20051117)
>ACPI: FACS 3FFBE000, 0040
>ACPI: APIC 3FFB0390, 006C (r1 M S I  OEMAPIC   1000705 MSFT       97)
>ACPI: MCFG 3FFB0400, 003C (r1 M S I  OEMMCFG   1000705 MSFT       97)
>ACPI: OEMB 3FFBE040, 0061 (r1 M S I  AMI_OEM   1000705 MSFT       97)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003ffb0000
>Entering add_active_range(0, 0, 151) 0 entries of 3200 used
>Entering add_active_range(0, 256, 262064) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000003ffb0000
>  NODE_DATA [000000000000b000 - 0000000000012fff]
>  bootmap [0000000000013000 -  000000000001aff7] pages 8
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-75db3b] TEXT DATA BSS
>early res: 3 [37d0f000-37fefc71] RAMDISK
>early res: 4 [97000-9ffff] EBDA
>early res: 5 [8000-afff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      151
>    0:      256 ->   262064
>On node 0 totalpages: 261959
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1390 pages reserved
>  DMA zone: 2545 pages, LIFO batch:0
>  DMA32 zone: 3526 pages used for memmap
>  DMA32 zone: 254442 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 0000000000097000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
>PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 45232 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 256987
>Policy zone: DMA32
>Kernel command line: ro root=UUID=fac3b3c7-736f-4464-8607-e2106245cd60 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 2399.913 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 1024616k/1048256k available (2656k kernel code, 23220k reserved, 1396k data, 356k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>Calibrating delay using timer specific routine.. 4801.92 BogoMIPS (lpj=2400962)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>using mwait in idle threads.
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 16666065
>Detected 16.666 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4799.87 BogoMIPS (lpj=2399937)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM1)
>Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=6272 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>net_namespace: 1016 bytes
>Time: 18:38:26  Date: 05/09/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  DD, should be CE [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 19 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:parse DMAR table failure.
>PCI-GART: No AMD northbridge found.
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>system 00:0c: ioport range 0xa10-0xaef has been reserved
>system 00:0c: ioport range 0xae0-0xaef has been reserved
>system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0d: ioport range 0x800-0x87f has been reserved
>system 00:0d: ioport range 0x480-0x4bf has been reserved
>system 00:0d: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:0d: iomem range 0xfed20000-0xfed8ffff has been reserved
>system 00:0f: iomem range 0xffc00000-0xffefffff could not be reserved
>system 00:10: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:10: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:11: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:12: iomem range 0x0-0x9ffff could not be reserved
>system 00:12: iomem range 0xc0000-0xcffff has been reserved
>system 00:12: iomem range 0xe0000-0xfffff could not be reserved
>system 00:12: iomem range 0x100000-0x3fffffff could not be reserved
>system 00:12: iomem range 0x0-0x0 could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: 0xfc000000-0xfe9fffff
>  PREFETCH window: 0x00000000c0000000-0x00000000dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: d000-dfff
>  MEM window: 0xfea00000-0xfeafffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: e000-efff
>  MEM window: 0xfeb00000-0xfebfffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2947k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1210358306.399:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 3FFBE0B0, 01D2 (r1    AMI   CPU1PM        1 INTL 20051117)
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: SSDT 3FFBE290, 0143 (r1    AMI   CPU2PM        1 INTL 20051117)
>ACPI: ACPI0007:01 is registered as cooling_device1
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 8:160:645
>Freeing unused kernel memory: 356k freed
>Write protecting the kernel read-only data: 1120k
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-14.fc9.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-14.fc9.x86_64 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b800
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b480
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.2
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>usb 6-2: new low speed USB device using uhci_hcd and address 2
>usb 6-2: configuration #1 chosen from 1 choice
>input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input1
>input,hidraw0: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1d.1-2
>input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input2
>input,hidraw1: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:1d.1-2
>usb 6-2: New USB device found, idVendor=0a81, idProduct=0101
>usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 6-2: Product: USB Keyboard
>usb 6-2: Manufacturer: CHESEN
>usb 7-1: new low speed USB device using uhci_hcd and address 2
>usb 7-1: configuration #1 chosen from 1 choice
>input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/input/input3
>input,hidraw2: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.2-1
>usb 7-1: New USB device found, idVendor=046d, idProduct=c50e
>usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 7-1: Product: USB RECEIVER
>usb 7-1: Manufacturer: Logitech
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfbfff000 port 0xfbfff100 irq 19
>ata2: SATA max UDMA/133 abar m2048@0xfbfff000 port 0xfbfff180 irq 19
>ata3: SATA max UDMA/133 abar m2048@0xfbfff000 port 0xfbfff200 irq 19
>ata4: SATA max UDMA/133 abar m2048@0xfbfff000 port 0xfbfff280 irq 19
>ata5: SATA max UDMA/133 abar m2048@0xfbfff000 port 0xfbfff300 irq 19
>ata6: SATA max UDMA/133 abar m2048@0xfbfff000 port 0xfbfff380 irq 19
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: Maxtor 7H500F0, HA431DN0, max UDMA/133
>ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-7: Maxtor 7H500F0, HA431DN0, max UDMA/133
>ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata2.00: configured for UDMA/133
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33, ATAPI AN
>ata3.00: applying bridge limits
>ata3.00: configured for UDMA/33
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 7H500F0   HA43 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      Maxtor 7H500F0   HA43 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
>sd 1:0:0:0: [sdb] Attached SCSI disk
>scsi 2:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1210358315.443:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux:8192 avtab hash slots allocated. Num of rules:170455
>SELinux:8192 avtab hash slots allocated. Num of rules:170455
>security:  6 users, 12 roles, 2277 types, 116 bools, 1 sens, 1024 cats
>security:  72 classes, 170455 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1210358316.097:3): policy loaded auid=4294967295 ses=4294967295
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
>ACPI: Power Button (CM) [PWRB]
>iTCO_vendor_support: vendor-support=0
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>scsi 2:0:0:0: Attached scsi generic sg2 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>r8169 0000:04:00.0: no MSI. Back to INTx.
>eth0: RTL8168b/8111b at 0xffffc200004f6000, 00:16:17:ef:40:47, XID 38000000 IRQ 17
>ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 20 (level, low) -> IRQ 20
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>firewire_ohci: Added fw-ohci device 0000:05:04.0, OHCI version 1.10
>input: PC Speaker as /devices/platform/pcspkr/input/input6
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x1
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2857: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2861:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2865:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2866:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:2874:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Line-Out Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Switch, skipped
>ppdev: user-space parallel port driver
>firewire_core: created device fw0: GUID 0010dc0001029ba7, S400
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-6, type ext3), uses xattr
>Adding 2096440k swap on /dev/mapper/isw_cfiigbeafd_Volume0p5.  Priority:-1 extents:1 across:2096440k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 445302: 304992