Attachment 305029 Details for Bug 445964 – dmesg

dmesg

attach_dmesg.txt (text/plain), 24.38 KB, created by Konrad Mosoń on 2008-05-10 17:07:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Konrad Mosoń

Created: 2008-05-10 17:07:02 UTC

Size: 24.38 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-14.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Thu May 1 06:28:41 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000037fd0000 (usable)
> BIOS-e820: 0000000037fd0000 - 0000000037fde000 (ACPI data)
> BIOS-e820: 0000000037fde000 - 0000000038000000 (ACPI NVS)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>895MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>found SMP MP-table at [c00ff780] 000ff780
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 229328) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229328
>  HighMem    229328 ->   229328
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   229328
>On node 0 totalpages: 229328
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1759 pages used for memmap
>  Normal zone: 223473 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F8380, 0014 (r0 ACPIAM)
>ACPI: RSDT 37FD0000, 003C (r1 A M I  OEMRSDT   2000709 MSFT       97)
>ACPI: FACP 37FD0200, 0084 (r2 A M I  OEMFACP   2000709 MSFT       97)
>ACPI: DSDT 37FD05E0, 65A9 (r1  A0598 A0598000        0 INTL  2002026)
>ACPI: FACS 37FDE000, 0040
>ACPI: APIC 37FD0390, 005C (r1 A M I  OEMAPIC   2000709 MSFT       97)
>ACPI: MCFG 37FD03F0, 003C (r1 A M I  OEMMCFG   2000709 MSFT       97)
>ACPI: BOOT 37FD05B0, 0028 (r1 A M I  OEMBOOT   2000709 MSFT       97)
>ACPI: SLIC 37FD0430, 0176 (r1 A M I  OEMSLIC   2000709 MSFT       97)
>ACPI: OEMB 37FDE040, 0056 (r1 A M I  AMI_OEM   2000709 MSFT       97)
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:14 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 38000000:c6e00000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227537
>Kernel command line: ro root=LABEL=/ verbose rhgb vga=792 -ata_generic
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07b9000 soft=c0799000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1866.824 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 901636k/917312k available (2236k kernel code, 15080k reserved, 1121k data, 284k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf7fd0000   ( 895 MB)
>      .init : 0xc074f000 - 0xc0796000   ( 284 kB)
>      .data : 0xc062f37d - 0xc0747800   (1121 kB)
>      .text : 0xc0400000 - 0xc062f37d   (2236 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3736.50 BogoMIPS (lpj=1868253)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 20k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Celeron(R) M CPU        440  @ 1.86GHz stepping 0c
>Total of 1 processors activated (3736.50 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3728 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 17:48:40  Date: 05/10/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
> 00:06: mem resource (0xfff80000-0xffffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
> 00:09: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
> 00:09: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
> 00:0a: mem resource (0xe0000000-0xefffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 3 of device 0000:00:00.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>system 00:05: ioport range 0x500-0x53f has been reserved
>system 00:06: ioport range 0x4d0-0x4d1 has been reserved
>system 00:06: ioport range 0x40b-0x40b has been reserved
>system 00:06: ioport range 0x4d6-0x4d6 has been reserved
>system 00:06: ioport range 0xc00-0xc01 has been reserved
>system 00:06: ioport range 0xc14-0xc14 has been reserved
>system 00:06: ioport range 0xc50-0xc51 has been reserved
>system 00:06: ioport range 0xc52-0xc52 has been reserved
>system 00:06: ioport range 0xc6c-0xc6c has been reserved
>system 00:06: ioport range 0xc6f-0xc6f has been reserved
>system 00:06: ioport range 0xcd4-0xcd5 has been reserved
>system 00:06: ioport range 0xcd6-0xcd7 has been reserved
>system 00:06: ioport range 0xcd8-0xcdf has been reserved
>system 00:06: ioport range 0x800-0x89f has been reserved
>system 00:06: ioport range 0x480-0x4bf has been reserved
>system 00:06: ioport range 0x900-0x90f has been reserved
>system 00:06: ioport range 0x910-0x91f has been reserved
>system 00:06: ioport range 0x4000-0x4004 has been reserved
>system 00:06: ioport range 0x4005-0x40ff has been reserved
>system 00:09: ioport range 0x250-0x25f has been reserved
>system 00:0b: iomem range 0x0-0x9ffff could not be reserved
>system 00:0b: iomem range 0xc0000-0xcffff could not be reserved
>system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0b: iomem range 0x100000-0x37ffffff could not be reserved
>system 00:0b: iomem range 0x0-0x0 could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: 0xfe100000-0xfe1fffff
>  PREFETCH window: 0x00000000bdf00000-0x00000000ddefffff
>PCI: Bus 3, cardbus bridge: 0000:02:01.0
>  IO window: 0x0000a000-0x0000a0ff
>  IO window: 0x0000a400-0x0000a4ff
>  PREFETCH window: 0x44000000-0x47ffffff
>  MEM window: 0x48000000-0x4bffffff
>PCI: Bridge: 0000:00:14.4
>  IO window: a000-bfff
>  MEM window: 0xfe200000-0xfeafffff
>  PREFETCH window: 0x00000000ddf00000-0x00000000dfefffff
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2594k freed
>Simple Boot Flag at 0xff set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1210441719.389:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:05.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 4608k, total 16384k
>vesafb: mode is 1024x768x24, linelength=3072, pages=6
>vesafb: protected mode interface info at c000:518e
>vesafb: pmi: set display start = c00c51fc, set palette = c00c5236
>vesafb: pmi: ports = 9810 9816 9854 9838 983c 985c 9800 9804 98b0 98b2 98b4 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (60 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>Yenta: CardBus bridge found at 0000:02:01.0 [1043:13d7]
>Yenta: ISA IRQ mask 0x0eb8, PCI irq 16
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff
>cs: IO port probe 0xa000-0xbfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xfe200000 - 0xfeafffff
>pcmcia: parent PCI bridge Memory window: 0xddf00000 - 0xdfefffff
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 8:335:845
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 908k
>Marking TSC unstable due to: TSC halts in idle.
>ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.2: irq 19, io mem 0xfebfd000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-14.fc9.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:13.2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 19, io mem 0xfebff000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x92a0b1, caps: 0xa0471b/0x200000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-14.fc9.i686 ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.0
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 19, io mem 0xfebfe000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-14.fc9.i686 ohci_hcd
>usb usb3: SerialNumber: 0000:00:13.1
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>usb 1-6: new high speed USB device using ehci_hcd and address 4
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:14.1 to 64
>ACPI: PCI interrupt for device 0000:00:14.1 disabled
>usb 1-6: configuration #1 chosen from 1 choice
>usb 1-6: New USB device found, idVendor=0b05, idProduct=171b
>usb 1-6: New USB device strings: Mfr=16, Product=32, SerialNumber=0
>usb 1-6: Product: USB2.0 WLAN
>usb 1-6: Manufacturer: ASUS
>usb 2-1: new full speed USB device using ohci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-1: New USB device found, idVendor=06b9, idProduct=4061
>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-1: Product: Speed Touch 330 
>usb 2-1: Manufacturer: THOMSON
>usb 2-1: SerialNumber: 000E505A58FA
>usb 2-2: new low speed USB device using ohci_hcd and address 3
>usb 2-2: configuration #1 chosen from 1 choice
>input: A4Tech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input3
>input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:13.0-2
>usb 2-2: New USB device found, idVendor=09da, idProduct=0006
>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2: Product: USB Optical Mouse
>usb 2-2: Manufacturer: A4Tech
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
>scsi0 : pata_atiixp
>scsi1 : pata_atiixp
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
>ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L632D, AS05, max UDMA/33
>ata1.01: configured for UDMA/33
>ata2.00: ATA-6: ST98823A, 3.06, max UDMA/100
>ata2.00: 156301488 sectors, multi 16: LBA48 
>ata2.00: simplex DMA is claimed by other device, disabling DMA
>ata2.00: configured for PIO4
>scsi 0:0:1:0: CD-ROM            TSSTcorp CD/DVDW TS-L632D AS05 PQ: 0 ANSI: 5
>scsi 1:0:0:0: Direct-Access     ATA      ST98823A         3.06 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 1:0:0:0: [sda] Attached SCSI disk
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: sda3: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 940727
>EXT3-fs: sda3: 1 orphan inode deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1210441758.107:2): selinux=0 auid=4294967295 ses=4294967295
>scsi 0:0:1:0: Attached scsi generic sg0 type 5
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>NET: Registered protocol family 8
>NET: Registered protocol family 20
>piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
>asus-laptop: Asus Laptop Support version 0.42
>asus-laptop: BSTS called, 0x7f returned
>asus-laptop:   A9Rp model detected
>usb 1-6: reset high speed USB device using ehci_hcd and address 4
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>Registered led device: asus::mail
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7
>ACPI: Lid Switch [LID]
>phy0: Selected rate control algorithm 'pid'
>usb 2-1: reset full speed USB device using ohci_hcd and address 2
>usbcore: registered new interface driver speedtch
>zd1211rw 1-6:1.0: phy0
>usbcore: registered new interface driver zd1211rw
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 20
>eth0: RealTek RTL8139 at 0xf8d5ac00, 00:18:f3:f9:a7:5b, IRQ 20
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>ACPI: AC Adapter [AC0] (on-line)
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:02:01.1 [1180:0822] (rev 13)
>ACPI: PCI Interrupt 0000:02:01.1[B] -> GSI 17 (level, low) -> IRQ 17
>sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
>mmc0: SDHCI at 0xfeaff800 irq 17 DMA
>ACPI: Battery Slot [BAT0] (battery present)
>fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
>Symbol init_mm is marked as UNUSED, however this module is using it.
>This symbol will go away in the future.
>Please evalute if this is the right api to use, and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion.
>[fglrx] Maximum main memory to use for locked dma buffers: 803 MBytes.
>[fglrx] ASYNCIO init succeed!
>[fglrx] PAT is enabled successfully!
>[fglrx] module loaded - fglrx 8.47.3 [Mar 29 2008] on minor 0
>ACPI: device:04 is registered as cooling_device1
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input8
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>input: PC Speaker as /devices/platform/pcspkr/input/input9
>usbcore: registered new interface driver snd-usb-audio
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
>ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x3
>ALSA sound/pci/hda/hda_codec.c:2236: hda_codec: model 'asus-laptop' is selected for config 1043:13d7 (ASUS A9rp)
>ALSA sound/pci/hda/hda_codec.c:1058: No slave found for Master Playback Volume
>speedtch 2-1:1.0: found stage 1 firmware speedtch-1.bin
>speedtch 2-1:1.0: found stage 2 firmware speedtch-2.bin
>ATM dev 0: ADSL line is synchronising
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>ATM dev 0: ADSL line is up (1312 kb/s down | 320 kb/s up)
>EXT3 FS on sda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1020088k swap on /dev/sda6.  Priority:-1 extents:1 across:1020088k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard
>KQEMU installed, max_locked_mem=452372kB.
>eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>fuse init (API version 7.9)
>usb 1-6: firmware version 0x4810 and device bootcode version 0x4802 differ
>zd1211rw 1-6:1.0: firmware version 4725
>zd1211rw 1-6:1.0: zd1211b chip 0b05:171b v4802 high 00-18-f3 AL2230_RF pa0 g----
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
>wlan: 0.9.4
>ath_pci: 0.9.4
>PPP generic driver version 2.4.2
>PPP Deflate Compression module registered
>hda-intel: Invalid position buffer, using LPIB read method instead.
>eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>zd1211rw 1-6:1.0: error ioread32(CR_REG1): -110
>wlan0: failed to set freq to 2432 MHz for scan
>ACPI: EC: missing OBF confirmation, don't expect it any longer.
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
>         cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
>         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata1.01: status: { DRDY }
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: device not ready (errno=-16), forcing hardreset
>ata1: soft resetting link
>ata1.01: configured for UDMA/33
>ata1: EH complete

Actions: View

Attachments on bug 445964: 305029 | 305030 | 305031 | 305032 | 305033