Attachment 305056 Details for Bug 445993 – System Config Soundcard Log

System Config Soundcard Log

scsconfig.log (text/plain), 49.39 KB, created by Frank Murphy on 2008-05-11 11:14:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Frank Murphy

Created: 2008-05-11 11:14:57 UTC

Size: 49.39 KB

patch

obsolete

>------- System Config Soundcard Log --------
>Sun May 11 12:03:52 IST 2008
>
>------- lspci --------
>00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
>00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
>00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
>00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
>00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
>00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
>00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
>00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
>00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
>00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
>00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
>00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
>00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
>00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
>00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
>00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)
>00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
>00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
>01:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 LE] (rev a1)
>03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b1)
>04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
>
>------- lspci -vn --------
>00:00.0 0600: 8086:29c0 (rev 02)
>	Subsystem: 1462:7345
>	Flags: bus master, fast devsel, latency 0
>	Capabilities: [e0] Vendor Specific Information <?>
>
>00:01.0 0604: 8086:29c1 (rev 02) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	Memory behind bridge: fc000000-fe8fffff
>	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
>	Capabilities: [88] Subsystem: 8086:0000
>	Capabilities: [80] Power Management version 3
>	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>	Capabilities: [a0] Express Root Port (Slot+), MSI 00
>	Kernel driver in use: pcieport-driver
>
>00:1a.0 0c03: 8086:2937 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: 1462:7345
>	Flags: bus master, medium devsel, latency 0, IRQ 16
>	I/O ports at bc00 [size=32]
>	Capabilities: [50] Vendor Specific Information <?>
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1a.1 0c03: 8086:2938 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: 1462:7345
>	Flags: bus master, medium devsel, latency 0, IRQ 21
>	I/O ports at b880 [size=32]
>	Capabilities: [50] Vendor Specific Information <?>
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1a.7 0c03: 8086:293c (rev 02) (prog-if 20 [EHCI])
>	Subsystem: 1462:7345
>	Flags: bus master, medium devsel, latency 0, IRQ 18
>	Memory at fbfffc00 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>	Capabilities: [58] Debug port: BAR=1 offset=00a0
>	Capabilities: [98] Vendor Specific Information <?>
>	Kernel driver in use: ehci_hcd
>	Kernel modules: ehci-hcd
>
>00:1b.0 0403: 8086:293e (rev 02)
>	Subsystem: 1462:735a
>	Flags: bus master, fast devsel, latency 0, IRQ 22
>	Memory at fbff8000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>	Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
>	Kernel driver in use: HDA Intel
>	Kernel modules: snd-hda-intel
>
>00:1c.0 0604: 8086:2940 (rev 02) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	Capabilities: [40] Express Root Port (Slot+), MSI 00
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>	Capabilities: [90] Subsystem: 1462:7345
>	Capabilities: [a0] Power Management version 2
>	Kernel driver in use: pcieport-driver
>
>00:1c.4 0604: 8086:2948 (rev 02) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>	I/O behind bridge: 0000c000-0000cfff
>	Memory behind bridge: fe900000-fe9fffff
>	Capabilities: [40] Express Root Port (Slot+), MSI 00
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>	Capabilities: [90] Subsystem: 1462:7345
>	Capabilities: [a0] Power Management version 2
>	Kernel driver in use: pcieport-driver
>
>00:1c.5 0604: 8086:294a (rev 02) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
>	I/O behind bridge: 0000d000-0000dfff
>	Memory behind bridge: fea00000-feafffff
>	Capabilities: [40] Express Root Port (Slot+), MSI 00
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>	Capabilities: [90] Subsystem: 1462:7345
>	Capabilities: [a0] Power Management version 2
>	Kernel driver in use: pcieport-driver
>
>00:1d.0 0c03: 8086:2934 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: 1462:7345
>	Flags: bus master, medium devsel, latency 0, IRQ 23
>	I/O ports at b800 [size=32]
>	Capabilities: [50] Vendor Specific Information <?>
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.1 0c03: 8086:2935 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: 1462:7345
>	Flags: bus master, medium devsel, latency 0, IRQ 19
>	I/O ports at b480 [size=32]
>	Capabilities: [50] Vendor Specific Information <?>
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.2 0c03: 8086:2936 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: 1462:7345
>	Flags: bus master, medium devsel, latency 0, IRQ 18
>	I/O ports at b400 [size=32]
>	Capabilities: [50] Vendor Specific Information <?>
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.3 0c03: 8086:2939 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: 1462:7345
>	Flags: bus master, medium devsel, latency 0, IRQ 16
>	I/O ports at b080 [size=32]
>	Capabilities: [50] Vendor Specific Information <?>
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.7 0c03: 8086:293a (rev 02) (prog-if 20 [EHCI])
>	Subsystem: 1462:7345
>	Flags: bus master, medium devsel, latency 0, IRQ 23
>	Memory at fbfff800 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>	Capabilities: [58] Debug port: BAR=1 offset=00a0
>	Capabilities: [98] Vendor Specific Information <?>
>	Kernel driver in use: ehci_hcd
>	Kernel modules: ehci-hcd
>
>00:1e.0 0604: 8086:244e (rev 92) (prog-if 01 [Subtractive decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
>	I/O behind bridge: 0000e000-0000efff
>	Memory behind bridge: feb00000-febfffff
>	Capabilities: [50] Subsystem: 1462:7345
>
>00:1f.0 0601: 8086:2916 (rev 02)
>	Subsystem: 1462:7345
>	Flags: bus master, medium devsel, latency 0
>	Capabilities: [e0] Vendor Specific Information <?>
>	Kernel modules: iTCO_wdt
>
>00:1f.2 0101: 8086:2920 (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
>	Subsystem: 1462:7345
>	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
>	I/O ports at b000 [size=8]
>	I/O ports at ac00 [size=4]
>	I/O ports at a880 [size=8]
>	I/O ports at a800 [size=4]
>	I/O ports at a480 [size=16]
>	I/O ports at a400 [size=16]
>	Capabilities: [70] Power Management version 3
>	Capabilities: [b0] Vendor Specific Information <?>
>	Kernel driver in use: ata_piix
>	Kernel modules: ata_piix
>
>00:1f.3 0c05: 8086:2930 (rev 02)
>	Subsystem: 1462:7345
>	Flags: medium devsel, IRQ 18
>	Memory at fbfff400 (64-bit, non-prefetchable) [size=256]
>	I/O ports at 0400 [size=32]
>	Kernel driver in use: i801_smbus
>	Kernel modules: i2c-i801
>
>00:1f.5 0101: 8086:2926 (rev 02) (prog-if 85 [Master SecO PriO])
>	Subsystem: 1462:7345
>	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
>	I/O ports at a000 [size=8]
>	I/O ports at 9c00 [size=4]
>	I/O ports at 9880 [size=8]
>	I/O ports at 9800 [size=4]
>	I/O ports at 9480 [size=16]
>	I/O ports at 9400 [size=16]
>	Capabilities: [70] Power Management version 3
>	Capabilities: [b0] Vendor Specific Information <?>
>	Kernel driver in use: ata_piix
>	Kernel modules: ata_piix
>
>01:00.0 0300: 10de:01d1 (rev a1) (prog-if 00 [VGA controller])
>	Subsystem: 10b0:0401
>	Flags: bus master, fast devsel, latency 0, IRQ 16
>	Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
>	Memory at d0000000 (64-bit, prefetchable) [size=256M]
>	Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
>	Expansion ROM at fe8e0000 [disabled] [size=128K]
>	Capabilities: [60] Power Management version 2
>	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>	Capabilities: [78] Express Endpoint, MSI 00
>	Kernel modules: nvidiafb
>
>03:00.0 0101: 11ab:6121 (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
>	Subsystem: 11ab:6121
>	Flags: bus master, fast devsel, latency 0, IRQ 16
>	I/O ports at cc00 [size=8]
>	I/O ports at c880 [size=4]
>	I/O ports at c800 [size=8]
>	I/O ports at c480 [size=4]
>	I/O ports at c400 [size=16]
>	Memory at fe9ffc00 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [48] Power Management version 2
>	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>	Capabilities: [e0] Express Legacy Endpoint, MSI 00
>	Kernel driver in use: pata_marvell
>	Kernel modules: ahci, pata_marvell
>
>04:00.0 0200: 10ec:8168 (rev 01)
>	Subsystem: 1462:345c
>	Flags: bus master, fast devsel, latency 0, IRQ 17
>	I/O ports at d800 [size=256]
>	Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
>	Expansion ROM at feac0000 [disabled] [size=128K]
>	Capabilities: [40] Power Management version 2
>	Capabilities: [48] Vital Product Data <?>
>	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
>	Capabilities: [60] Express Endpoint, MSI 00
>	Capabilities: [84] Vendor Specific Information <?>
>	Kernel driver in use: r8169
>	Kernel modules: r8169
>
>------- lsmod --------
>Module                  Size  Used by
>autofs4                20356  2 
>coretemp                9472  0 
>f71882fg               12296  0 
>hwmon                   6300  2 coretemp,f71882fg
>ipv6                  221660  18 
>ipt_REJECT              6784  2 
>xt_tcpudp               6656  1 
>nf_conntrack_ipv4      11396  2 
>xt_state                5888  2 
>nf_conntrack           49748  2 nf_conntrack_ipv4,xt_state
>iptable_filter          6528  1 
>ip_tables              13840  1 iptable_filter
>x_tables               15236  4 ipt_REJECT,xt_tcpudp,xt_state,ip_tables
>loop                   16772  0 
>dm_multipath           18056  0 
>sr_mod                 17064  0 
>cdrom                  32796  1 sr_mod
>snd_hda_intel         330144  1 
>snd_seq_dummy           6660  0 
>ahci                   26760  0 
>snd_seq_oss            30364  0 
>snd_seq_midi_event      9600  1 snd_seq_oss
>snd_seq                48448  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>snd_seq_device         10124  3 snd_seq_dummy,snd_seq_oss,snd_seq
>snd_pcm_oss            42496  0 
>snd_mixer_oss          16768  1 snd_pcm_oss
>snd_pcm                67076  2 snd_hda_intel,snd_pcm_oss
>snd_timer              21640  2 snd_seq,snd_pcm
>snd_page_alloc         11400  2 snd_hda_intel,snd_pcm
>snd_hwdep              10500  1 snd_hda_intel
>snd                    48312  12 snd_hda_intel,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
>pata_marvell            8064  0 
>iTCO_wdt               13476  0 
>iTCO_vendor_support     6916  1 iTCO_wdt
>serio_raw               8708  0 
>pcspkr                  6272  0 
>button                 10000  0 
>sg                     31028  0 
>r8169                  27396  0 
>soundcore               9288  1 snd
>i2c_i801               11920  0 
>i2c_core               20628  1 i2c_i801
>ata_piix               20100  2 
>ata_generic             8964  0 
>pata_acpi               8192  0 
>libata                126688  5 ahci,pata_marvell,ata_piix,ata_generic,pata_acpi
>dm_snapshot            18468  0 
>dm_zero                 5632  0 
>dm_mirror              26116  0 
>dm_mod                 48980  12 dm_multipath,dm_snapshot,dm_zero,dm_mirror
>usb_storage            75912  2 
>sd_mod                 25624  6 
>scsi_mod              120820  5 sr_mod,sg,libata,usb_storage,sd_mod
>ext3                  108424  2 
>jbd                    40852  1 ext3
>mbcache                10116  1 ext3
>uhci_hcd               22928  0 
>ohci_hcd               22276  0 
>ehci_hcd               32268  0 
>
>------- /etc/modprobe.conf --------
>
>
>------- /etc/asound.conf --------
>
>
>------- aplay -l --------
>**** List of PLAYBACK Hardware Devices ****
>card 0: Intel [HDA Intel], device 0: ALC883 Analog [ALC883 Analog]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
>card 0: Intel [HDA Intel], device 1: ALC883 Digital [ALC883 Digital]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
>
>------- amixer --------
>
>
>------- /proc/asound/version --------
>Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC).
>
>------- rpm -q alsa-lib --------
>alsa-lib-1.0.16-3.fc9.i386
>
>------- rpm -q alsa-utils --------
>alsa-utils-1.0.16-2.fc9.i386
>
>------- /proc/asound/modules --------
> 0 snd_hda_intel
>
>------- /proc/asound/pcm --------
>00-02: ALC883 Analog : ALC883 Analog : capture 1
>00-01: ALC883 Digital : ALC883 Digital : playback 1
>00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1
>
>------- /etc/sysconfig/hwconf --------
>
>
>------- dmesg --------
>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-14.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Thu May 1 06:28:41 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
> BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
> BIOS-e820: 000000007ffbe000 - 000000007fff0000 (ACPI NVS)
> BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>found SMP MP-table at [c00ff780] 000ff780
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 524208) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524208
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   524208
>On node 0 totalpages: 524208
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2303 pages used for memmap
>  HighMem zone: 292529 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F9850, 0014 (r0 ACPIAM)
>ACPI: RSDT 7FFB0000, 0038 (r1 103107 RSDT1015 20071031 MSFT       97)
>ACPI: FACP 7FFB0200, 0084 (r2 103107 FACP1015 20071031 MSFT       97)
>ACPI: DSDT 7FFB0440, 52B7 (r1  0AAAA 0AAAA000        0 INTL 20051117)
>ACPI: FACS 7FFBE000, 0040
>ACPI: APIC 7FFB0390, 006C (r1 103107 APIC1015 20071031 MSFT       97)
>ACPI: MCFG 7FFB0400, 003C (r1 103107 OEMMCFG  20071031 MSFT       97)
>ACPI: OEMB 7FFBE040, 0061 (r1 103107 OEMB1015 20071031 MSFT       97)
>ACPI: GSCI 7FFBE0B0, 2024 (r1 103107 GMCHSCI  20071031 MSFT       97)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>Processor #2 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>Processor #3 6:15 APIC version 20
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
>PM: Registered nosave memory: 000000000009d000 - 000000000009e000
>PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
>PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520113
>Kernel command line: ro root=/dev/VolGroup01/LogVol00 irqpoll pci=routeirq
>Misrouted IRQ fixup and polling support enabled
>This may significantly impact system performance
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07b9000 soft=c0799000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2531.748 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2070264k/2096832k available (2236k kernel code, 25176k reserved, 1121k data, 284k init, 1179328k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074f000 - 0xc0796000   ( 284 kB)
>      .data : 0xc062f37d - 0xc0747800   (1121 kB)
>      .text : 0xc0400000 - 0xc062f37d   (2236 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>Calibrating delay using timer specific routine.. 5076.66 BogoMIPS (lpj=2538330)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07
>Booting processor 1/1 ip 4000
>CPU 1 irqstacks, hard=c07ba000 soft=c079a000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5062.59 BogoMIPS (lpj=2531297)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07
>Booting processor 2/2 ip 4000
>CPU 2 irqstacks, hard=c07bb000 soft=c079b000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5062.59 BogoMIPS (lpj=2531296)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#2.
>CPU2: Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07
>Booting processor 3/3 ip 4000
>CPU 3 irqstacks, hard=c07bc000 soft=c079c000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5062.61 BogoMIPS (lpj=2531307)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#3.
>CPU3: Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz stepping 07
>Total of 4 processors activated (20264.46 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Brought up 4 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=3728 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>  domain 1: span 0000000f
>   groups: 00000003 0000000c
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>  domain 1: span 0000000f
>   groups: 00000003 0000000c
>CPU2 attaching sched-domain:
> domain 0: span 0000000c
>  groups: 00000004 00000008
>  domain 1: span 0000000f
>   groups: 0000000c 00000003
>CPU3 attaching sched-domain:
> domain 0: span 0000000c
>  groups: 00000008 00000004
>  domain 1: span 0000000f
>   groups: 0000000c 00000003
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 11:00:54  Date: 05/11/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: Error attaching device data
>ACPI: Error attaching device data
>ACPI: Error attaching device data
>ACPI: Error attaching device data
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>system 00:06: ioport range 0xa00-0xadf has been reserved
>system 00:06: ioport range 0xae0-0xaef has been reserved
>system 00:07: ioport range 0x4d0-0x4d1 has been reserved
>system 00:07: ioport range 0x800-0x87f has been reserved
>system 00:07: ioport range 0x480-0x4bf has been reserved
>system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved
>system 00:09: iomem range 0xffc00000-0xffefffff could not be reserved
>system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0c: iomem range 0x0-0x9ffff could not be reserved
>system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
>system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved
>system 00:0c: iomem range 0x0-0x0 could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: 0xfc000000-0xfe8fffff
>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: c000-cfff
>  MEM window: 0xfe900000-0xfe9fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: d000-dfff
>  MEM window: 0xfea00000-0xfeafffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: e000-efff
>  MEM window: 0xfeb00000-0xfebfffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3279k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1210503653.685:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: ACPI0007:02 is registered as cooling_device2
>ACPI: ACPI0007:03 is registered as cooling_device3
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 2
>Switched to high resolution mode on CPU 3
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 8:944:23
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel read-only data: 908k
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-14.fc9.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-14.fc9.i686 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-14.fc9.i686 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 2-1: new high speed USB device using ehci_hcd and address 2
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-14.fc9.i686 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b800
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-14.fc9.i686 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b480
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-1: New USB device found, idVendor=0411, idProduct=00db
>usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>usb 2-1: Product: BUFFALO INC. USB-SATA Bridge
>usb 2-1: Manufacturer: BUFFALO INC.
>usb 2-1: SerialNumber: SAMSUNG HMS17ZJD0Q107323      
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25-14.fc9.i686 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25-14.fc9.i686 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b080
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.25-14.fc9.i686 uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.3
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usb 6-2: new full speed USB device using uhci_hcd and address 2
>usb 6-2: configuration #1 chosen from 1 choice
>hub 6-2:1.0: USB hub found
>hub 6-2:1.0: 4 ports detected
>usb 6-2: New USB device found, idVendor=0557, idProduct=7000
>usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 6-2.1: new low speed USB device using uhci_hcd and address 3
>usb 6-2.1: configuration #1 chosen from 1 choice
>input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.1/6-2.1:1.0/input/input1
>input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-2.1
>usb 6-2.1: New USB device found, idVendor=413c, idProduct=2003
>usb 6-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 6-2.1: Product: Dell USB Keyboard
>usb 6-2.1: Manufacturer: Dell
>usb 6-2.4: new low speed USB device using uhci_hcd and address 4
>usb 6-2.4: configuration #1 chosen from 1 choice
>input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.4/6-2.4:1.0/input/input2
>input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2.4
>usb 6-2.4: New USB device found, idVendor=0461, idProduct=4d15
>usb 6-2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>usb 6-2.4: Product: USB Optical Mouse
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>scsi 0:0:0:0: Direct-Access     SAMSUNG  HM121HI               PQ: 0 ANSI: 2
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 38 00 00 00
>sd 0:0:0:0: [sda] Assuming drive cache: write through
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 38 00 00 00
>sd 0:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>ata_piix 0000:00:1f.2: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi1 : ata_piix
>scsi2 : ata_piix
>ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
>ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.01: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
>ata1.01: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.01: configured for UDMA/133
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.01: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
>ata2.01: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.01: configured for UDMA/133
>scsi 1:0:1:0: Direct-Access     ATA      SAMSUNG HD321KJ  CP10 PQ: 0 ANSI: 5
>sd 1:0:1:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
>sd 1:0:1:0: [sdb] Write Protect is off
>sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:1:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
>sd 1:0:1:0: [sdb] Write Protect is off
>sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 1:0:1:0: [sdb] Attached SCSI disk
>scsi 2:0:1:0: Direct-Access     ATA      SAMSUNG HD321KJ  CP10 PQ: 0 ANSI: 5
>sd 2:0:1:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
>sd 2:0:1:0: [sdc] Write Protect is off
>sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:1:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
>sd 2:0:1:0: [sdc] Write Protect is off
>sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 2:0:1:0: [sdc] Attached SCSI disk
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
>ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-7: Hitachi HDT725050VLA360, V56OA7EA, max UDMA/133
>ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDT72505 V56O PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1
>sd 3:0:0:0: [sdd] Attached SCSI disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1210503672.357:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux:8192 avtab hash slots allocated. Num of rules:172315
>SELinux:8192 avtab hash slots allocated. Num of rules:172315
>security:  8 users, 12 roles, 2301 types, 116 bools, 1 sens, 1024 cats
>security:  72 classes, 172315 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1210503672.803:3): policy loaded auid=4294967295 ses=4294967295
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>r8169 0000:04:00.0: no MSI. Back to INTx.
>eth0: RTL8168b/8111b at 0xf88f8000, 00:19:db:b4:a7:64, XID 38000000 IRQ 17
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:1:0: Attached scsi generic sg1 type 0
>sd 2:0:1:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ACPI: Power Button (CM) [PWRB]
>input: PC Speaker as /devices/platform/pcspkr/input/input5
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>scsi5 : pata_marvell
>scsi6 : pata_marvell
>ata5: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 16
>ata6: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 16
>BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00 
>ata5.00: ATAPI: Optiarc DVD RW AD-5170A, 1.11, max UDMA/66
>ata5.00: configured for UDMA/66
>BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00 
>scsi 5:0:0:0: CD-ROM            Optiarc  DVD RW AD-5170A  1.11 PQ: 0 ANSI: 5
>scsi 5:0:0:0: Attached scsi generic sg4 type 5
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x1
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2857: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
>ALSA sound/pci/hda/hda_codec.c:2861:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2865:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2866:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:2874:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 5:0:0:0: Attached scsi CD-ROM sr0
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Line-Out Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Switch, skipped
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>Adding 2031608k swap on /dev/mapper/VolGroup01-LogVol01.  Priority:-2 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>f71882fg: Not a Fintek device
>f71882fg: Found F71882FG chip at 0xa00, revision 32
>coretemp coretemp.0: Using relative temperature scale!
>coretemp coretemp.1: Using relative temperature scale!
>coretemp coretemp.2: Using relative temperature scale!
>coretemp coretemp.3: Using relative temperature scale!
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>r8169: eth0: link up
>r8169: eth0: link up
>eth0: no IPv6 routers present
>usb 6-2.4: USB disconnect, address 4
>usb 6-2.4: new low speed USB device using uhci_hcd and address 5
>usb 6-2.4: configuration #1 chosen from 1 choice
>input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2.4/6-2.4:1.0/input/input6
>input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2.4
>usb 6-2.4: New USB device found, idVendor=0461, idProduct=4d15
>usb 6-2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>usb 6-2.4: Product: USB Optical Mouse
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>warning: process `python2' used the deprecated sysctl system call with 1.23.
>

Actions: View

Attachments on bug 445993: 305056 | 305057 | 305058