Attachment 305129 Details for Bug 446058 – dmesg output

dmesg output

dmesg (text/plain), 101.59 KB, created by Owen Taylor on 2008-05-12 13:55:05 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Owen Taylor

Created: 2008-05-12 13:55:05 UTC

Size: 101.59 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-14.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Thu May 1 06:06:21 EDT 2008
>Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet i915.modeset=1
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cdaa2000 (usable)
> BIOS-e820: 00000000cdaa2000 - 00000000cdb53000 (ACPI NVS)
> BIOS-e820: 00000000cdb53000 - 00000000ceec6000 (usable)
> BIOS-e820: 00000000ceec6000 - 00000000ceec8000 (reserved)
> BIOS-e820: 00000000ceec8000 - 00000000cef84000 (usable)
> BIOS-e820: 00000000cef84000 - 00000000cefe5000 (ACPI NVS)
> BIOS-e820: 00000000cefe5000 - 00000000cefea000 (usable)
> BIOS-e820: 00000000cefea000 - 00000000cefff000 (ACPI data)
> BIOS-e820: 00000000cefff000 - 00000000cf000000 (usable)
> BIOS-e820: 00000000cf000000 - 00000000d0000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
> BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 000000012c000000 (usable)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 842402) 1 entries of 3200 used
>Entering add_active_range(0, 842579, 847558) 2 entries of 3200 used
>Entering add_active_range(0, 847560, 847748) 3 entries of 3200 used
>Entering add_active_range(0, 847845, 847850) 4 entries of 3200 used
>Entering add_active_range(0, 847871, 847872) 5 entries of 3200 used
>Entering add_active_range(0, 1048576, 1228800) 6 entries of 3200 used
>end_pfn_map = 1228800
>DMI 2.4 present.
>ACPI: RSDP 000FE020, 0014 (r0 INTEL )
>ACPI: RSDT CEFFD038, 0064 (r1 INTEL  DQ3510J       22F       1000013)
>ACPI: FACP CEFFC000, 00F4 (r2 INTEL  DQ3510J       22F MSFT  1000013)
>ACPI: DSDT CEFF8000, 3C61 (r1 INTEL  DQ3510J       22F MSFT  1000013)
>ACPI: FACS CEF91000, 0040
>ACPI: APIC CEFF7000, 0078 (r1 INTEL  DQ3510J       22F MSFT  1000013)
>ACPI: WDDT CEFF6000, 0040 (r1 INTEL  DQ3510J       22F MSFT  1000013)
>ACPI: MCFG CEFF5000, 003C (r1 INTEL  DQ3510J       22F MSFT  1000013)
>ACPI: ASF! CEFF4000, 00A6 (r32 INTEL  DQ3510J       22F MSFT  1000013)
>ACPI: SSDT CEFF2000, 0204 (r1 INTEL     CpuPm      22F MSFT  1000013)
>ACPI: SSDT CEFF1000, 0175 (r1 INTEL   Cpu0Ist      22F MSFT  1000013)
>ACPI: SSDT CEFF0000, 0175 (r1 INTEL   Cpu1Ist      22F MSFT  1000013)
>ACPI: SSDT CEFEF000, 0175 (r1 INTEL   Cpu2Ist      22F MSFT  1000013)
>ACPI: SSDT CEFEE000, 0175 (r1 INTEL   Cpu3Ist      22F MSFT  1000013)
>ACPI: SSDT CEFED000, 00DD (r1 INTEL   Cpu0Cst      22F MSFT  1000013)
>ACPI: SSDT CEFEC000, 00DD (r1 INTEL   Cpu1Cst      22F MSFT  1000013)
>ACPI: SSDT CEFEB000, 00DD (r1 INTEL   Cpu2Cst      22F MSFT  1000013)
>ACPI: SSDT CEFEA000, 00DD (r1 INTEL   Cpu3Cst      22F MSFT  1000013)
>ACPI: SPCR CEFF3000, 0050 (r1 INTEL  DQ3510J       22F MSFT  1000013)
>ACPI: TCPA CEF85000, 0A87 (r1 INTEL  TIANO           2 MSFT  1000013)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000012c000000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 842402) 1 entries of 3200 used
>Entering add_active_range(0, 842579, 847558) 2 entries of 3200 used
>Entering add_active_range(0, 847560, 847748) 3 entries of 3200 used
>Entering add_active_range(0, 847845, 847850) 4 entries of 3200 used
>Entering add_active_range(0, 847871, 847872) 5 entries of 3200 used
>Entering add_active_range(0, 1048576, 1228800) 6 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000012c000000
>  NODE_DATA [000000000000e000 - 0000000000015fff]
>  bootmap [0000000000016000 -  000000000003b7ff] pages 26
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-75db3b] TEXT DATA BSS
>early res: 3 [37c51000-37fef017] RAMDISK
>early res: 4 [9f800-a07ff] EBDA
>early res: 5 [8000-dfff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
> [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
> [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
> [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
> [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
> [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
> [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
> [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
> [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
> [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
> [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006e00000 on node 0
> [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007200000 on node 0
> [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007600000 on node 0
> [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007a00000 on node 0
> [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007e00000 on node 0
> [ffffe20004200000-ffffe200043fffff] PMD ->ffff810008200000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1228800
>Movable zone start PFN for each node
>early_node_map[7] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   842402
>    0:   842579 ->   847558
>    0:   847560 ->   847748
>    0:   847845 ->   847850
>    0:   847871 ->   847872
>    0:  1048576 ->  1228800
>On node 0 totalpages: 1027702
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1385 pages reserved
>  DMA zone: 2558 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 829199 pages, LIFO batch:31
>  Normal zone: 2464 pages used for memmap
>  Normal zone: 177760 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>PM: Registered nosave memory: 00000000cdaa2000 - 00000000cdb53000
>PM: Registered nosave memory: 00000000ceec6000 - 00000000ceec8000
>PM: Registered nosave memory: 00000000cef84000 - 00000000cefe5000
>PM: Registered nosave memory: 00000000cefea000 - 00000000cefff000
>PM: Registered nosave memory: 00000000cf000000 - 00000000d0000000
>PM: Registered nosave memory: 00000000d0000000 - 00000000f0000000
>PM: Registered nosave memory: 00000000f0000000 - 00000000f8000000
>PM: Registered nosave memory: 00000000f8000000 - 00000000ffc00000
>PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
>Allocating PCI resources starting at d2000000 (gap: d0000000:20000000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 45232 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1009517
>Policy zone: Normal
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet i915.modeset=1
>Unknown boot option `i915.modeset=1': ignoring
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 2657.320 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x8421000 - 0xc421000
>Memory: 3975628k/4915200k available (2656k kernel code, 135180k reserved, 1396k data, 356k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>Calibrating delay using timer specific routine.. 5316.83 BogoMIPS (lpj=2658416)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 20760310
>Detected 20.760 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5633.48 BogoMIPS (lpj=2816742)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=6272 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>net_namespace: 1016 bytes
>Time: 13:36:01  Date: 05/12/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at f0000000 - f7ffffff
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xf0000000-0xf7ffffff could not be reserved
>system 00:01: iomem range 0xfeb00000-0xfeb03fff has been reserved
>system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
>system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
>system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
>system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
>system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
>system 00:01: iomem range 0xc0000-0xdffff has been reserved
>system 00:01: iomem range 0xe0000-0xfffff could not be reserved
>system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved
>system 00:06: ioport range 0x500-0x53f has been reserved
>system 00:06: ioport range 0x400-0x47f has been reserved
>system 00:06: ioport range 0x680-0x6ff has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: 0xe0500000-0xe05fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: 0xe0600000-0xe06fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: 1000-1fff
>  MEM window: 0xe0100000-0xe01fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: disabled.
>  MEM window: 0xe0700000-0xe07fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: 0xe0800000-0xe08fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: 0xe0000000-0xe00fffff
>  PREFETCH window: disabled.
>PCI: Enabling device 0000:00:1c.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Enabling device 0000:00:1c.1 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Enabling device 0000:00:1c.3 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Enabling device 0000:00:1c.4 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3704k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1210599361.420:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>Allocate Port Service[0000:00:1c.2:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>Allocate Port Service[0000:00:1c.3:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>Allocate Port Service[0000:00:1c.4:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Monitor-Mwait will be used to enter C-1 state
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel Q35 Chipset.
>agpgart: Detected 7164K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 17
>0000:00:03.3: ttyS1 at I/O 0x2470 (irq = 17) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 8:852:634
>  hash matches device 0000:00:1c.1:pcie00
>Freeing unused kernel memory: 356k freed
>Write protecting the kernel read-only data: 1120k
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 17, io mem 0xe0426400
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-14.fc9.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0426000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-14.fc9.x86_64 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 18, io base 0x000020c0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x000020a0
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.2 to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 17, io base 0x00002080
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1a.2
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002060
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002040
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002020
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.2
>md: raid1 personality registered for level 1
>xor: automatically using best checksumming function: generic_sse
>   generic_sse:  9876.000 MB/sec
>xor: using function: generic_sse (9876.000 MB/sec)
>async_tx: api initialized (async)
>raid6: int64x1   2605 MB/s
>raid6: int64x2   3312 MB/s
>raid6: int64x4   2468 MB/s
>raid6: int64x8   2281 MB/s
>raid6: sse2x1    4605 MB/s
>usb 7-1: new low speed USB device using uhci_hcd and address 2
>raid6: sse2x2    5187 MB/s
>raid6: sse2x4    8027 MB/s
>raid6: using algorithm sse2x4 (8027 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:03.2 to 64
>ACPI: PCI interrupt for device 0000:00:03.2 disabled
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>usb 7-1: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input1
>input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1
>Fixing up Logitech keyboard report descriptor
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input2
>input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1
>usb 7-1: New USB device found, idVendor=046d, idProduct=c517
>usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 7-1: Product: USB Receiver
>usb 7-1: Manufacturer: Logitech
>ata_piix 0000:00:1f.2: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 21 (level, low) -> IRQ 21
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x2468 ctl 0x249c bmdma 0x2430 irq 21
>ata2: SATA max UDMA/133 cmd 0x2460 ctl 0x2498 bmdma 0x2438 irq 21
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-6: ST380013AS, 3.18, max UDMA/133
>ata1.00: 156301488 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/133
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATA-6: ST380013AS, 3.18, max UDMA/133
>ata2.00: 156301488 sectors, multi 16: LBA48 
>ata2.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      ST380013AS       3.18 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      ST380013AS       3.18 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
>sd 1:0:0:0: [sdb] Attached SCSI disk
>ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 21 (level, low) -> IRQ 21
>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x2458 ctl 0x2494 bmdma 0x2410 irq 21
>ata4: SATA max UDMA/133 cmd 0x2450 ctl 0x2490 bmdma 0x2418 irq 21
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>md: md0 stopped.
>md: bind<sdb5>
>md: bind<sda5>
>raid1: raid set md0 active with 2 out of 2 mirrors
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1210599371.381:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux:8192 avtab hash slots allocated. Num of rules:172315
>SELinux:8192 avtab hash slots allocated. Num of rules:172315
>security:  8 users, 12 roles, 2301 types, 116 bools, 1 sens, 1024 cats
>security:  72 classes, 172315 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1210599371.843:3): policy loaded auid=4294967295 ses=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
>e1000e: Copyright (c) 1999-2007 Intel Corporation.
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>input: PC Speaker as /devices/platform/pcspkr/input/input3
>eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:07:1d:2a
>eth0: Intel(R) PRO/1000 Network Connection
>eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>scsi4 : pata_marvell
>scsi5 : pata_marvell
>ata5: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 18
>ata6: DUMMY
>BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>ata5.00: ATAPI: SAMSUNG CDRW/DVD SM-352N, TA00, max UDMA/33
>[drm] Initialized drm 1.1.0 20060810
>mm/memory.c:127: bad pmd ffff810000207208(9090909090909090).
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>setting up 8122368 bytes of VRAM space
>setting up 260313088 bytes of TT space
>ata5.00: configured for UDMA/33
>scsi 4:0:0:0: CD-ROM            SAMSUNG  CDRW/DVD SM-352N TA00 PQ: 0 ANSI: 5
>scsi 4:0:0:0: Attached scsi generic sg2 type 5
>ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:06:03.0, OHCI version 1.0
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 18 (level, low) -> IRQ 18
>                        (SDVO_CMD_GET_DEVICE_CAPS)
>02 43 00 01 01 01 01 00 (Success)
>00                      (SDVO_CMD_SET_TARGET_INPUT)
>                        (Success)
>                        (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
>C4 09 20 4E             (Success)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x4
>hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2857: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2861:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2865:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2866:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:2874:    inputs: mic=0x18, fmic=0x1a, line=0x19, fline=0x0, cd=0x0, aux=0x0
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Center Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave LFE Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Line-Out Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Center Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave LFE Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave IEC958 Playback Switch, skipped
>i2c-adapter i2c-0: unable to read EDID block.
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 1x/52x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>i2c-adapter i2c-0: unable to read EDID block.
>firewire_core: created device fw0: GUID 0090270001ef0ff5, S400
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>allocated 2048x2048 fb: 0x007bf000, bo ffff810129c80a00
>00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>                        (Success)
>[drm] TMDS-1: set mode 1280x1024 24
>01 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>                        (Success)
>30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
>                        (Success)
>30 70 13 00 1E 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2)
>                        (Success)
>00                      (SDVO_CMD_SET_TARGET_INPUT)
>                        (Success)
>30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
>                        (Success)
>30 70 13 00 1E 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
>                        (Success)
>01                      (SDVO_CMD_SET_CLOCK_RATE_MULT)
>                        (Success)
>                        (SDVO_CMD_GET_TRAINED_INPUTS)
>01                      (Success)
>01 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>                        (Success)
>Console: switching to colour frame buffer device 160x64
>fb0: intelfb frame buffer device
>00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>                        (Success)
>[drm] TMDS-1: set mode 1280x1024 24
>01 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
>                        (Success)
>30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
>                        (Success)
>30 70 13 00 1E 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2)
>                        (Success)
>00                      (SDVO_CMD_SET_TARGET_INPUT)
>                        (Success)
>30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
>                        (Success)
>30 70 13 00 1E 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
>                        (Success)
>01                      (SDVO_CMD_SET_CLOCK_RATE_MULT)
>                        (Success)
>                        (SDVO_CMD_GET_TRAINED_INPUTS)
>01                      (Success)
>01 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
>                        (Success)
>[drm] Initialized i915 1.12.0 20071122 on minor 0
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>type=1400 audit(1210599386.907:4): avc:  denied  { read } for  pid=1602 comm="mount" name="X" dev=dm-0 ino=565251 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:var_t:s0 tclass=lnk_file
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>type=1400 audit(1210599387.130:5): avc:  denied  { read } for  pid=1602 comm="mount" name="X" dev=dm-0 ino=565251 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:var_t:s0 tclass=lnk_file
>type=1400 audit(1210599387.130:6): avc:  denied  { read } for  pid=1602 comm="mount" name="X" dev=dm-0 ino=565251 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:var_t:s0 tclass=lnk_file
>type=1400 audit(1210599387.130:7): avc:  denied  { read } for  pid=1602 comm="mount" name="X" dev=dm-0 ino=565251 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:var_t:s0 tclass=lnk_file
>Adding 506008k swap on /dev/sda1.  Priority:-1 extents:1 across:506008k
>Adding 506008k swap on /dev/sdb1.  Priority:-2 extents:1 across:506008k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>coretemp coretemp.0: Using relative temperature scale!
>coretemp coretemp.1: Using relative temperature scale!
>Loading iSCSI transport class v2.0-869.
>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>virbr0: starting userspace STP failed, starting kernel STP
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
>eth0: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>virbr0: no IPv6 routers present
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>eth0: no IPv6 routers present
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: DAC-1: no EDID data
>                        (SDVO_CMD_GET_ATTACHED_DISPLAYS)
>01 00                   (Success)
>02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
>set status page addr 0xffffffff

Actions: View

Attachments on bug 446058: 305128 | 305129