Attachment 305322 Details for Bug 446314 – dmesg output

dmesg output

dmesg (text/plain), 17.57 KB, created by Sam Steingold on 2008-05-14 02:21:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Sam Steingold

Created: 2008-05-14 02:21:00 UTC

Size: 17.57 KB

patch

obsolete

>Linux version 2.6.22.7-57.fc6 (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-13)) #1 SMP Fri Sep 21 20:23:24 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000cc000 - 00000000000d2000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
> BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data)
> BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>767MB LOWMEM available.
>found SMP MP-table at 000fb880
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 196592) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   196592
>  HighMem    196592 ->   196592
>early_node_map[1] active PFN ranges
>    0:        0 ->   196592
>On node 0 totalpages: 196592
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1503 pages used for memmap
>  Normal zone: 190993 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FA610, 0014 (r0 AMI   )
>ACPI: RSDT 2FFF0000, 002C (r1 AMIINT VIA_K7         10 MSFT       97)
>ACPI: FACP 2FFF0030, 0081 (r1 AMIINT VIA_K7         11 MSFT       97)
>ACPI: DSDT 2FFF0120, 319A (r1    VIA   VIA_K7     1000 MSFT  100000D)
>ACPI: FACS 2FFF8000, 0040
>ACPI: APIC 2FFF00C0, 0054 (r1 AMIINT VIA_K7          9 MSFT       97)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:6 APIC version 16
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
>Built 1 zonelists.  Total pages: 195057
>Kernel command line: ro root=/dev/hda2  rhgb
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ce000 soft=c07ae000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1533.088 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 772808k/786368k available (2253k kernel code, 12952k reserved, 1204k data, 268k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf0800000 - 0xff7fe000   ( 239 MB)
>    lowmem  : 0xc0000000 - 0xefff0000   ( 767 MB)
>      .init : 0xc0766000 - 0xc07a9000   ( 268 kB)
>      .data : 0xc0633580 - 0xc0760584   (1204 kB)
>      .text : 0xc0400000 - 0xc0633580   (2253 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3068.02 BogoMIPS (lpj=1534011)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU: After all inits, caps: 0383f3ff c1cbfbff 00000000 00000420 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: AMD Athlon(tm) XP 1800+ stepping 02
>Total of 1 processors activated (3068.02 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1536 bytes
>Time: 18:37:59  Date: 04/11/108
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfdb21, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [URP2] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: dde00000-dfefffff
>  PREFETCH window: d9c00000-ddcfffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 1363k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1210531079.312:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 2011BA9563911839
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU1] (supports 16 throttling states)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected VIA KT266/KY266x/KT333 chipset
>agpgart: AGP aperture is 64M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:11.1
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci0000:00:11.1
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: WDC WD2500PB-55FBA0, ATA DISK drive
>hdb: HDS728040PLAT20, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: Pioneer DVD-ROM ATAPIModel DVD-106S 012, ATAPI CD/DVD-ROM drive
>hdd: CR-48XATE, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
>hdb: max request size: 512KiB
>hdb: 80418240 sectors (41174 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(100)
>hdb: cache flushes supported
> hdb: hdb1
>ide-floppy driver 0.99.newide
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Processor cpuid 662 not supported
>Using IPI No-Shortcut mode
>  Magic number: 8:310:645
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 268k freed
>Write protecting the kernel read-only data: 927k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:11.2[D] -> GSI 5 (level, low) -> IRQ 5
>uhci_hcd 0000:00:11.2: UHCI Host Controller
>uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:11.2: irq 5, io base 0x0000dc00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:11.3[D] -> GSI 5 (level, low) -> IRQ 5
>uhci_hcd 0000:00:11.3: UHCI Host Controller
>uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:11.3: irq 5, io base 0x0000e000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:11.4[D] -> GSI 5 (level, low) -> IRQ 5
>uhci_hcd 0000:00:11.4: UHCI Host Controller
>uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:11.4: irq 5, io base 0x0000e400
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>usb 1-2: new low speed USB device using uhci_hcd and address 2
>usb 1-2: configuration #1 chosen from 1 choice
>hiddev96: USB HID v1.11 Device [Belkin UPS] on usb-0000:00:11.2-2
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: hda2: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 261656
>ext3_orphan_cleanup: deleting unreferenced inode 1225143
>ext3_orphan_cleanup: deleting unreferenced inode 1272971
>ext3_orphan_cleanup: deleting unreferenced inode 1323259
>ext3_orphan_cleanup: deleting unreferenced inode 1322106
>ext3_orphan_cleanup: deleting unreferenced inode 1224136
>ext3_orphan_cleanup: deleting unreferenced inode 310874
>ext3_orphan_cleanup: deleting unreferenced inode 1143329
>ext3_orphan_cleanup: deleting unreferenced inode 261878
>ext3_orphan_cleanup: deleting unreferenced inode 783670
>ext3_orphan_cleanup: deleting unreferenced inode 864965
>ext3_orphan_cleanup: deleting unreferenced inode 767391
>ext3_orphan_cleanup: deleting unreferenced inode 767343
>ext3_orphan_cleanup: deleting unreferenced inode 1145108
>ext3_orphan_cleanup: deleting unreferenced inode 2334944
>ext3_orphan_cleanup: deleting unreferenced inode 2334919
>ext3_orphan_cleanup: deleting unreferenced inode 2334705
>ext3_orphan_cleanup: deleting unreferenced inode 2334703
>ext3_orphan_cleanup: deleting unreferenced inode 2334811
>ext3_orphan_cleanup: deleting unreferenced inode 865303
>ext3_orphan_cleanup: deleting unreferenced inode 767323
>ext3_orphan_cleanup: deleting unreferenced inode 1142712
>ext3_orphan_cleanup: deleting unreferenced inode 1273336
>ext3_orphan_cleanup: deleting unreferenced inode 1142506
>ext3_orphan_cleanup: deleting unreferenced inode 1273241
>ext3_orphan_cleanup: deleting unreferenced inode 1273228
>ext3_orphan_cleanup: deleting unreferenced inode 1273394
>ext3_orphan_cleanup: deleting unreferenced inode 1224316
>ext3_orphan_cleanup: deleting unreferenced inode 1273189
>ext3_orphan_cleanup: deleting unreferenced inode 1144052
>ext3_orphan_cleanup: deleting unreferenced inode 1273205
>ext3_orphan_cleanup: deleting unreferenced inode 1144230
>ext3_orphan_cleanup: deleting unreferenced inode 1144109
>ext3_orphan_cleanup: deleting unreferenced inode 1273239
>ext3_orphan_cleanup: deleting unreferenced inode 1224924
>ext3_orphan_cleanup: deleting unreferenced inode 1273338
>ext3_orphan_cleanup: deleting unreferenced inode 1273356
>ext3_orphan_cleanup: deleting unreferenced inode 1224923
>ext3_orphan_cleanup: deleting unreferenced inode 1225819
>ext3_orphan_cleanup: deleting unreferenced inode 1225793
>ext3_orphan_cleanup: deleting unreferenced inode 1273278
>ext3_orphan_cleanup: deleting unreferenced inode 1226521
>ext3_orphan_cleanup: deleting unreferenced inode 1225700
>ext3_orphan_cleanup: deleting unreferenced inode 1226271
>ext3_orphan_cleanup: deleting unreferenced inode 1225442
>ext3_orphan_cleanup: deleting unreferenced inode 1226423
>ext3_orphan_cleanup: deleting unreferenced inode 1226391
>ext3_orphan_cleanup: deleting unreferenced inode 1226191
>ext3_orphan_cleanup: deleting unreferenced inode 1226176
>ext3_orphan_cleanup: deleting unreferenced inode 1225935
>ext3_orphan_cleanup: deleting unreferenced inode 1226495
>ext3_orphan_cleanup: deleting unreferenced inode 1225837
>ext3_orphan_cleanup: deleting unreferenced inode 1226503
>ext3_orphan_cleanup: deleting unreferenced inode 1225423
>ext3_orphan_cleanup: deleting unreferenced inode 1225927
>ext3_orphan_cleanup: deleting unreferenced inode 1225896
>ext3_orphan_cleanup: deleting unreferenced inode 1225824
>ext3_orphan_cleanup: deleting unreferenced inode 1225746
>ext3_orphan_cleanup: deleting unreferenced inode 1225667
>ext3_orphan_cleanup: deleting unreferenced inode 1225603
>ext3_orphan_cleanup: deleting unreferenced inode 1226140
>ext3_orphan_cleanup: deleting unreferenced inode 1225271
>ext3_orphan_cleanup: deleting unreferenced inode 1226497
>ext3_orphan_cleanup: deleting unreferenced inode 1224041
>EXT3-fs: hda2: 64 orphan inodes deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 16
>eth0: RealTek RTL8139 at 0xf081ef00, 00:50:ba:c8:0d:c7, IRQ 16
>eth0:  Identified 8139 chip type 'RTL-8139C'
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>NET: Registered protocol family 23
>parport_pc 00:04: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>hdc: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(66)
>Uniform CD-ROM driver Revision: 3.20
>hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 17
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3 FS on hda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1020116k swap on /dev/hda3.  Priority:-1 extents:1 across:1020116k
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (6143 buckets, 49144 max)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>eth0: no IPv6 routers present
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18
>usb 1-2: USB disconnect, address 2
>usb 1-2: new low speed USB device using uhci_hcd and address 3
>usb 1-2: configuration #1 chosen from 1 choice
>hiddev96: USB HID v1.11 Device [Belkin UPS] on usb-0000:00:11.2-2
>UDP: short packet: From 60.48.187.87:4671 1483/1480 to 192.168.7.3:4672

Actions: View

Attachments on bug 446314: 305322 | 305570 | 305571 | 305572 | 305573 | 305575 | 305576 | 305577 | 305580 | 305581 | 305583 | 305584 | 305585 | 305586 | 305588 | 305589 | 305590 | 305592 | 305594 | 305595 | 305597 | 305598 | 305599 | 305600 | 305602 | 305603 | 305604