Attachment 305348 Details for Bug 446366 – Syslog from failed update

Syslog from failed update

syslog (text/plain), 44.38 KB, created by Simon Andrews on 2008-05-14 10:38:32 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Simon Andrews

Created: 2008-05-14 10:38:32 UTC

Size: 44.38 KB

patch

obsolete

><6>Initializing cgroup subsys cpuset
><6>Initializing cgroup subsys cpu
><5>Linux version 2.6.25-14.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Thu May 1 06:06:21 EDT 2008
><6>Command line: initrd=initrd.img BOOT_IMAGE=vmlinuz 
><6>BIOS-provided physical RAM map:
><6> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
><6> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
><6> BIOS-e820: 0000000000100000 - 00000000d7e0ac00 (usable)
><6> BIOS-e820: 00000000d7e0ac00 - 00000000d7e0cc00 (ACPI NVS)
><6> BIOS-e820: 00000000d7e0ec00 - 00000000d7e5cc00 (reserved)
><6> BIOS-e820: 00000000d7e5cc00 - 00000000d7e5ec00 (ACPI data)
><6> BIOS-e820: 00000000d7e5ec00 - 00000000d8000000 (reserved)
><6> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
><6> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
><6> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
><6> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
><6> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
><6> BIOS-e820: 0000000100000000 - 0000000124000000 (usable)
><7>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 884234) 1 entries of 3200 used
><7>Entering add_active_range(0, 1048576, 1196032) 2 entries of 3200 used
><6>end_pfn_map = 1196032
><6>DMI 2.3 present.
><4>ACPI: RSDP 000FEBF0, 0024 (r2 DELL  )
><4>ACPI: XSDT 000FCEDC, 006C (r1 DELL    B8K           14 ASL        61)
><4>ACPI: FACP 000FD004, 00F4 (r3 DELL    B8K           14 ASL        61)
><4>ACPI: DSDT FFF52DE2, 36C9 (r1   DELL    dt_ex     1000 INTL 20050624)
><4>ACPI: FACS D7E0AC00, 0040
><4>ACPI: SSDT FFF565CC, 00AC (r1   DELL    st_ex     1000 INTL 20050624)
><4>ACPI: APIC 000FD0F8, 0092 (r1 DELL    B8K           14 ASL        61)
><4>ACPI: BOOT 000FD18A, 0028 (r1 DELL    B8K           14 ASL        61)
><4>ACPI: ASF! 000FD1B2, 0092 (r32 DELL    B8K           14 ASL        61)
><4>ACPI: MCFG 000FD244, 003E (r1 DELL    B8K           14 ASL        61)
><4>ACPI: HPET 000FD282, 0038 (r1 DELL    B8K           14 ASL        61)
><4>ACPI: TCPA 000FD4DE, 0032 (r1 DELL    B8K           14 ASL        61)
><4>ACPI: SLIC 000FD2BA, 00C0 (r1 DELL    B8K           14 ASL        61)
><5>ACPI: DMI detected: Dell PR 390
><6>No NUMA configuration found
><6>Faking a node at 0000000000000000-0000000124000000
><7>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 884234) 1 entries of 3200 used
><7>Entering add_active_range(0, 1048576, 1196032) 2 entries of 3200 used
><6>Bootmem setup node 0 0000000000000000-0000000124000000
><6>  NODE_DATA [000000000000e000 - 0000000000015fff]
><6>  bootmap [0000000000016000 -  000000000003a7ff] pages 25
><6>early res: 0 [0-fff] BIOS data page
><6>early res: 1 [6000-7fff] SMP_TRAMPOLINE
><6>early res: 2 [200000-75db3b] TEXT DATA BSS
><6>early res: 3 [7f685000-7ffff468] RAMDISK
><6>early res: 4 [9fc00-a0bff] EBDA
><6>early res: 5 [8000-dfff] PGTABLE
><7> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
><7> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
><7> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
><7> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
><7> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
><7> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
><7> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
><7> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
><7> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
><7> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
><7> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
><7> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
><7> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
><7> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
><7> [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
><7> [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
><7> [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
><7> [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
><7> [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
><7> [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
><7> [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
><7> [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
><7> [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
><7> [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0
><7> [ffffe20003800000-ffffe200039fffff] PMD ->ffff810007200000 on node 0
><7> [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007600000 on node 0
><7> [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007a00000 on node 0
><7> [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007e00000 on node 0
><7> [ffffe20004000000-ffffe200041fffff] PMD ->ffff810008200000 on node 0
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  DMA32        4096 ->  1048576
><4>  Normal    1048576 ->  1196032
><4>Movable zone start PFN for each node
><4>early_node_map[3] active PFN ranges
><4>    0:        0 ->      159
><4>    0:      256 ->   884234
><4>    0:  1048576 ->  1196032
><7>On node 0 totalpages: 1031593
><7>  DMA zone: 56 pages used for memmap
><7>  DMA zone: 1385 pages reserved
><7>  DMA zone: 2558 pages, LIFO batch:0
><7>  DMA32 zone: 14280 pages used for memmap
><7>  DMA32 zone: 865858 pages, LIFO batch:31
><7>  Normal zone: 2016 pages used for memmap
><7>  Normal zone: 145440 pages, LIFO batch:31
><7>  Movable zone: 0 pages used for memmap
><6>ACPI: PM-Timer IO Port: 0x808
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
><6>Processor #0 (Bootup-CPU)
><6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
><6>Processor #1
><6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
><6>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
><6>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
><6>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
><6>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
><6>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
><6>ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
><6>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
><6>IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ9 used by override.
><6>Setting APIC routing to flat
><6>ACPI: HPET id: 0x8086a201 base: 0xfed00000
><6>Using ACPI (MADT) for SMP configuration information
><6>PM: Registered nosave memory: 000000000009f000 - 00000000000f0000
><6>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
><6>PM: Registered nosave memory: 00000000d7e0a000 - 00000000d7e0b000
><6>PM: Registered nosave memory: 00000000d7e0b000 - 00000000d7e0c000
><6>PM: Registered nosave memory: 00000000d7e0c000 - 00000000d7e0f000
><6>PM: Registered nosave memory: 00000000d7e0f000 - 00000000d7e5c000
><6>PM: Registered nosave memory: 00000000d7e5c000 - 00000000d7e5d000
><6>PM: Registered nosave memory: 00000000d7e5d000 - 00000000d7e5e000
><6>PM: Registered nosave memory: 00000000d7e5e000 - 00000000d7e5f000
><6>PM: Registered nosave memory: 00000000d7e5f000 - 00000000d8000000
><6>PM: Registered nosave memory: 00000000d8000000 - 00000000f0000000
><6>PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
><6>PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
><6>PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
><6>PM: Registered nosave memory: 00000000fed00000 - 00000000fed20000
><6>PM: Registered nosave memory: 00000000fed20000 - 00000000feda0000
><6>PM: Registered nosave memory: 00000000feda0000 - 00000000fee00000
><6>PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
><6>PM: Registered nosave memory: 00000000fef00000 - 00000000ffb00000
><6>PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
><6>Allocating PCI resources starting at da000000 (gap: d8000000:18000000)
><6>SMP: Allowing 8 CPUs, 6 hotplug CPUs
><6>PERCPU: Allocating 45232 bytes of per cpu data
><4>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1013856
><4>Policy zone: Normal
><5>Kernel command line: initrd=initrd.img BOOT_IMAGE=vmlinuz 
><4>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 32768 bytes)
><6>TSC calibrated against PM_TIMER
><6>time.c: Detected 2128.055 MHz processor.
><4>Console: colour VGA+ 80x25
><6>console [tty0] enabled
><6>Checking aperture...
><7>Calgary: detecting Calgary via BIOS EBDA area
><7>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
><6>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
><6>Placing software IO TLB between 0x8421000 - 0xc421000
><6>Memory: 3985000k/4784128k available (2656k kernel code, 141372k reserved, 1396k data, 356k init)
><7>CPA: page pool initialized 1 of 1 pages preallocated
><6>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=8, Nodes=1
><7>hpet clockevent registered
><4>Calibrating delay using timer specific routine.. 4258.70 BogoMIPS (lpj=2129351)
><6>Security Framework initialized
><6>SELinux:  Initializing.
><7>SELinux:  Starting in permissive mode
><6>selinux_register_security:  Registering secondary module capability
><6>Capability LSM initialized as secondary
><6>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
><6>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
><4>Mount-cache hash table entries: 256
><6>Initializing cgroup subsys ns
><6>Initializing cgroup subsys cpuacct
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 4096K
><6>CPU 0/0 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><6>CPU0: Thermal monitoring enabled (TM2)
><6>using mwait in idle threads.
><6>ACPI: Core revision 20070126
><6>Using local APIC timer interrupts.
><7>APIC timer calibration result 16625427
><6>Detected 16.625 MHz APIC timer.
><6>Booting processor 1/2 APIC 0x1
><4>Initializing CPU#1
><4>Calibrating delay using timer specific routine.. 4256.08 BogoMIPS (lpj=2128041)
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 4096K
><6>CPU 1/1 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 1
><6>CPU1: Thermal monitoring enabled (TM2)
><4>Intel(R) Core(TM)2 CPU          6420  @ 2.13GHz stepping 06
><6>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
><6>Brought up 2 CPUs
><7>sizeof(vma)=176 bytes
><7>sizeof(page)=56 bytes
><7>sizeof(inode)=560 bytes
><7>sizeof(dentry)=208 bytes
><7>sizeof(ext3inode)=760 bytes
><7>sizeof(buffer_head)=104 bytes
><7>sizeof(skbuff)=224 bytes
><7>sizeof(task_struct)=6272 bytes
><7>CPU0 attaching sched-domain:
><7> domain 0: span 00000000,00000003
><7>  groups: 00000000,00000001 00000000,00000002
><7>  domain 1: span 00000000,00000003
><7>   groups: 00000000,00000003
><7>CPU1 attaching sched-domain:
><7> domain 0: span 00000000,00000003
><7>  groups: 00000000,00000002 00000000,00000001
><7>  domain 1: span 00000000,00000003
><7>   groups: 00000000,00000003
><6>net_namespace: 1016 bytes
><4>Time: 10:04:01  Date: 05/14/08
><6>NET: Registered protocol family 16
><6>No dock devices found.
><6>ACPI: bus type pci registered
><6>PCI: Using MMCONFIG at f0000000 - f3ffffff
><6>PCI: Using configuration type 1
><7>ACPI: EC: Look up EC in DSDT
><5>ACPI: BIOS _OSI(Linux) query ignored via DMI
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S1 S3 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><6>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
><6>pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
><6>PCI: Transparent bridge - 0000:00:1e.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]
><6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
><6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
><6>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
><6>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
><6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
><6>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
><6>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
><4>ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] -  00, should be 89 [20070126]
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 11 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><6>NetLabel: Initializing
><6>NetLabel:  domain hash size = 128
><6>NetLabel:  protocols = UNLABELED CIPSOv4
><6>NetLabel:  unlabeled traffic allowed by default
><6>PCI-GART: No AMD northbridge found.
><6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
><6>hpet0: 3 64-bit timers, 14318180 Hz
><4>ACPI: RTC can wake from S4
><7>Switched to high resolution mode on CPU 0
><7>Switched to high resolution mode on CPU 1
><6>system 00:01: ioport range 0x800-0x85f has been reserved
><6>system 00:01: ioport range 0xc00-0xc7f has been reserved
><6>system 00:01: ioport range 0x860-0x8ff could not be reserved
><6>system 00:08: iomem range 0x0-0x9ffff could not be reserved
><6>system 00:08: iomem range 0x100000-0xffffff could not be reserved
><6>system 00:08: iomem range 0x1000000-0xd7e0abff could not be reserved
><6>system 00:08: iomem range 0xf0000-0xfffff could not be reserved
><6>system 00:08: iomem range 0xc0000-0xcffff has been reserved
><6>system 00:08: iomem range 0xfec00000-0xfecfffff could not be reserved
><6>system 00:08: iomem range 0xfee00000-0xfeefffff could not be reserved
><6>system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
><6>system 00:08: iomem range 0xffc00000-0xffffffff could not be reserved
><6>system 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved
><6>system 00:09: iomem range 0xfeda0000-0xfedacfff has been reserved
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: disabled.
><6>  MEM window: 0xe8000000-0xefefffff
><6>  PREFETCH window: 0x00000000d8000000-0x00000000dfffffff
><6>PCI: Bridge: 0000:00:1c.0
><6>  IO window: disabled.
><6>  MEM window: 0xe7f00000-0xe7ffffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1c.4
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1c.5
><6>  IO window: disabled.
><6>  MEM window: 0xe7e00000-0xe7efffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1c.4 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
><7>PCI: Setting latency timer of device 0000:00:1c.5 to 64
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><6>NET: Registered protocol family 2
><6>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
><6>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
><6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
><6>TCP: Hash tables configured (established 524288 bind 65536)
><6>TCP reno registered
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 9705k freed
><6>Simple Boot Flag at 0x7a set to 0x1
><6>audit: initializing netlink socket (disabled)
><5>type=2000 audit(1210759442.507:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><7>SELinux:  Registering netfilter hooks
><6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>pci 0000:01:00.0: Boot video device
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:01.0:pcie00]
><7>Allocate Port Service[0000:00:01.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.0:pcie00]
><7>Allocate Port Service[0000:00:1c.0:pcie02]
><7>Allocate Port Service[0000:00:1c.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:1c.4 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.4:pcie00]
><7>Allocate Port Service[0000:00:1c.4:pcie02]
><7>Allocate Port Service[0000:00:1c.4:pcie03]
><7>PCI: Setting latency timer of device 0000:00:1c.5 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.5:pcie00]
><7>Allocate Port Service[0000:00:1c.5:pcie02]
><7>Allocate Port Service[0000:00:1c.5:pcie03]
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>ACPI: ACPI0007:00 is registered as cooling_device0
><6>ACPI: ACPI0007:01 is registered as cooling_device1
><7>hpet_resources: 0xfed00000 is busy
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.103
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>brd: module loaded
><6>input: Macintosh mouse button emulation as /devices/virtual/input/input0
><6>PNP: No PS/2 controller found. Probing ports directly.
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
><6>rtc0: alarms up to one day
><6>cpuidle: using governor ladder
><6>cpuidle: using governor menu
><6>usbcore: registered new interface driver hiddev
><6>usbcore: registered new interface driver usbhid
><6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
><6>TCP cubic registered
><6>Initializing XFRM netlink socket
><6>NET: Registered protocol family 1
><6>NET: Registered protocol family 17
><4>registered taskstats version 1
><4>  Magic number: 8:616:72
><6>Freeing unused kernel memory: 356k freed
><6>Write protecting the kernel read-only data: 1120k
><6>RPC: Registered udp transport module.
><6>RPC: Registered tcp transport module.
><6>loop: module loaded
><6>Floppy drive(s): fd0 is 1.44M
><4>floppy0: no floppy controllers found
><6>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
><6>input: PC Speaker as /devices/platform/pcspkr/input/input1
><6>squashfs: version 3.3 (2007/10/31) Phillip Lougher
><5>SCSI subsystem initialized
><6>Loading iSCSI transport class v2.0-869.
><5>iscsi: registered transport (tcp)
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><6>USB Universal Host Controller Interface driver v3.0
><6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><7>libata version 3.00 loaded.
><27>May 14 10:04:06 udevd-event[820]: node_symlink: device node '/dev/rtc' already exists, link to '/dev/rtc0' will not overwrite it
><6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: UHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
><6>usb usb1: SerialNumber: 0000:00:1d.0
><6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: UHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
><6>usb usb2: SerialNumber: 0000:00:1d.1
><6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
><6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: UHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
><6>usb usb3: SerialNumber: 0000:00:1d.2
><6>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
><7>PCI: Setting latency timer of device 0000:00:1d.3 to 64
><6>uhci_hcd 0000:00:1d.3: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>usb 1-2: new low speed USB device using uhci_hcd and address 2
><6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb4: Product: UHCI Host Controller
><6>usb usb4: Manufacturer: Linux 2.6.25-14.fc9.x86_64 uhci_hcd
><6>usb usb4: SerialNumber: 0000:00:1d.3
><7>ahci 0000:00:1f.2: version 3.0
><6>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20
><6>usb 1-2: configuration #1 chosen from 1 choice
><6>input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input2
><6>input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-2
><6>usb 1-2: New USB device found, idVendor=413c, idProduct=3012
><6>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 1-2: Product: Dell USB Optical Mouse
><6>usb 1-2: Manufacturer: Dell
><6>usb 2-1: new full speed USB device using uhci_hcd and address 2
><6>usb 2-1: configuration #1 chosen from 1 choice
><6>usb 2-1: New USB device found, idVendor=0644, idProduct=0200
><6>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 2-1: Product: CA-200
><6>usb 2-1: Manufacturer: TEAC
><6>usb 2-1: SerialNumber: 00000600E657
><6>Initializing USB Mass Storage driver...
><6>usb 3-1: new low speed USB device using uhci_hcd and address 2
><6>usb 3-1: configuration #1 chosen from 1 choice
><6>input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input3
><6>input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1
><6>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
><6>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
><7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
><6>scsi0 : ahci
><6>scsi1 : ahci
><6>scsi2 : ahci
><6>scsi3 : ahci
><6>ata1: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970100 irq 20
><6>ata2: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970180 irq 20
><6>ata3: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970200 irq 20
><6>ata4: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970280 irq 20
><6>usb 3-1: New USB device found, idVendor=413c, idProduct=2105
><6>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 3-1: Product: Dell USB Keyboard
><6>usb 3-1: Manufacturer: Dell
><6>usb 3-2: new full speed USB device using uhci_hcd and address 3
><6>usb 3-2: configuration #1 chosen from 1 choice
><6>hub 3-2:1.0: USB hub found
><6>hub 3-2:1.0: 2 ports detected
><6>usb 3-2: New USB device found, idVendor=0424, idProduct=2502
><6>usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
><6>scsi4 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 2
><7>usb-storage: waiting for device to settle before scanning
><6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>ata1.00: ATA-7: ST3250820AS, 3.ADG, max UDMA/133
><6>ata1.00: 488281250 sectors, multi 8: LBA48 NCQ (depth 31/32)
><6>ata1.00: configured for UDMA/133
><6>usb 3-2.1: new full speed USB device using uhci_hcd and address 4
><6>usb 3-2.1: configuration #1 chosen from 1 choice
><6>hub 3-2.1:1.0: USB hub found
><6>hub 3-2.1:1.0: 4 ports detected
><6>usb 3-2.1: New USB device found, idVendor=0424, idProduct=2602
><6>usb 3-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
><6>ata2: SATA link down (SStatus 0 SControl 300)
><6>usb 3-2.1.1: new full speed USB device using uhci_hcd and address 5
><6>usb 3-2.1.1: configuration #1 chosen from 1 choice
><6>usb 3-2.1.1: New USB device found, idVendor=0424, idProduct=2228
><6>usb 3-2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 3-2.1.1: Product: Flash Card Reader
><6>usb 3-2.1.1: Manufacturer: Generic
><6>usb 3-2.1.1: SerialNumber: 0708022004FC
><6>scsi5 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 5
><7>usb-storage: waiting for device to settle before scanning
><6>usbcore: registered new interface driver usb-storage
><6>USB Mass Storage support registered.
><6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>ata3.00: ATA-7: ST3250820AS, 3.ADG, max UDMA/133
><6>ata3.00: 488281250 sectors, multi 8: LBA48 NCQ (depth 31/32)
><6>ata3.00: configured for UDMA/133
><6>ata4: SATA link down (SStatus 0 SControl 300)
><5>scsi 0:0:0:0: Direct-Access     ATA      ST3250820AS      3.AD PQ: 0 ANSI: 5
><5>scsi 2:0:0:0: Direct-Access     ATA      ST3250820AS      3.AD PQ: 0 ANSI: 5
><6>tg3.c:v3.90 (April 12, 2008)
><6>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
><7>PCI: Setting latency timer of device 0000:04:00.0 to 64
><6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1f.1 to 64
><6>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
><6>eth0: Tigon3 [partno(BCM95754) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1a:a0:38:38:11
><6>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
><6>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
><6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
><6>ehci_hcd 0000:00:1d.7: debug port 1
><7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: irq 21, io mem 0xff980800
><4>Driver 'sd' needs updating - please use bus_type methods
><5>sd 0:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 0:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda:<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb5: configuration #1 chosen from 1 choice
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 8 ports detected
><6>usb 1-2: USB disconnect, address 2
><4> sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
><5>sd 0:0:0:0: [sda] Attached SCSI disk
><5>sd 2:0:0:0: [sdb] 488281250 512-byte hardware sectors (250000 MB)
><5>sd 2:0:0:0: [sdb] Write Protect is off
><7>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
><5>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 2:0:0:0: [sdb] 488281250 512-byte hardware sectors (250000 MB)
><5>sd 2:0:0:0: [sdb] Write Protect is off
><7>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
><5>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: sdb1
><5>sd 2:0:0:0: [sdb] Attached SCSI disk
><5>sd 0:0:0:0: Attached scsi generic sg0 type 0
><5>sd 2:0:0:0: Attached scsi generic sg1 type 0
><6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
><6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb5: Product: EHCI Host Controller
><6>usb usb5: Manufacturer: Linux 2.6.25-14.fc9.x86_64 ehci_hcd
><6>usb usb5: SerialNumber: 0000:00:1d.7
><7>ata_piix 0000:00:1f.1: version 2.12
><6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1f.1 to 64
><6>scsi6 : ata_piix
><6>scsi7 : ata_piix
><6>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
><6>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
><6>usb 2-1: USB disconnect, address 2
><6>usb 3-1: USB disconnect, address 2
><6>usb 3-2: USB disconnect, address 3
><6>usb 3-2.1: USB disconnect, address 4
><6>usb 3-2.1.1: USB disconnect, address 5
><6>ata5.00: ATAPI: HL-DT-STDVD+-RW GSA-H21N, B109, max UDMA/33
><6>ata5.00: configured for UDMA/33
><7>ata6: port disabled. ignoring.
><5>scsi 6:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GSA-H21N B109 PQ: 0 ANSI: 5
><5>scsi 6:0:0:0: Attached scsi generic sg2 type 5
><4>Driver 'sr' needs updating - please use bus_type methods
><4>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 6:0:0:0: Attached scsi CD-ROM sr0
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><6>usb 5-3: new high speed USB device using ehci_hcd and address 3
><6>usb 5-3: configuration #1 chosen from 1 choice
><6>scsi8 : SCSI emulation for USB Mass Storage devices
><6>usb 5-3: New USB device found, idVendor=0644, idProduct=0200
><6>usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 5-3: Product: CA-200
><6>usb 5-3: Manufacturer: TEAC
><6>usb 5-3: SerialNumber: 00000600E657
><7>usb-storage: device found at 3
><7>usb-storage: waiting for device to settle before scanning
><6>usb 5-6: new high speed USB device using ehci_hcd and address 5
><6>usb 5-6: configuration #1 chosen from 1 choice
><6>hub 5-6:1.0: USB hub found
><6>hub 5-6:1.0: 2 ports detected
><6>usb 5-6: New USB device found, idVendor=0424, idProduct=2502
><6>usb 5-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
><6>usb 3-1: new low speed USB device using uhci_hcd and address 6
><6>usb 3-1: configuration #1 chosen from 1 choice
><6>input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input4
><6>input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1
><6>usb 3-1: New USB device found, idVendor=413c, idProduct=2105
><6>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 3-1: Product: Dell USB Keyboard
><6>usb 3-1: Manufacturer: Dell
><6>usb 1-2: new low speed USB device using uhci_hcd and address 3
><6>usb 1-2: configuration #1 chosen from 1 choice
><6>input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input5
><6>input,hidraw1: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-2
><6>usb 1-2: New USB device found, idVendor=413c, idProduct=3012
><6>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 1-2: Product: Dell USB Optical Mouse
><6>usb 1-2: Manufacturer: Dell
><6>usb 5-6.1: new high speed USB device using ehci_hcd and address 6
><6>usb 5-6.1: configuration #1 chosen from 1 choice
><6>hub 5-6.1:1.0: USB hub found
><6>hub 5-6.1:1.0: 4 ports detected
><6>usb 5-6.1: New USB device found, idVendor=0424, idProduct=2602
><6>usb 5-6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
><6>usb 5-6.1.1: new high speed USB device using ehci_hcd and address 7
><6>usb 5-6.1.1: configuration #1 chosen from 1 choice
><6>scsi9 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 7
><7>usb-storage: waiting for device to settle before scanning
><6>usb 5-6.1.1: New USB device found, idVendor=0424, idProduct=2228
><6>usb 5-6.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 5-6.1.1: Product: Flash Card Reader
><6>usb 5-6.1.1: Manufacturer: Generic
><6>usb 5-6.1.1: SerialNumber: 0708022004FC
><7>usb-storage: device scan complete
><5>scsi 8:0:0:0: Direct-Access     TEAC     USB   HS-CF Card 4.00 PQ: 0 ANSI: 0
><5>scsi 8:0:0:1: Direct-Access     TEAC     USB   HS-xD/SM   4.00 PQ: 0 ANSI: 0
><5>scsi 8:0:0:2: Direct-Access     TEAC     USB   HS-MS Card 4.00 PQ: 0 ANSI: 0
><5>scsi 8:0:0:3: Direct-Access     TEAC     USB   HS-SD Card 4.00 PQ: 0 ANSI: 0
><5>sd 8:0:0:0: [sdc] Attached SCSI removable disk
><5>sd 8:0:0:0: Attached scsi generic sg3 type 0
><5>sd 8:0:0:1: [sdd] Attached SCSI removable disk
><5>sd 8:0:0:1: Attached scsi generic sg4 type 0
><5>sd 8:0:0:2: [sde] Attached SCSI removable disk
><5>sd 8:0:0:2: Attached scsi generic sg5 type 0
><5>sd 8:0:0:3: [sdf] Attached SCSI removable disk
><5>sd 8:0:0:3: Attached scsi generic sg6 type 0
><7>usb-storage: device scan complete
><5>scsi 9:0:0:0: Direct-Access     Generic  Flash HS-CF      4.44 PQ: 0 ANSI: 0
><5>scsi 9:0:0:1: Direct-Access     Generic  Flash HS-COMBO   4.44 PQ: 0 ANSI: 0
><5>sd 9:0:0:0: [sdg] Attached SCSI removable disk
><5>sd 9:0:0:0: Attached scsi generic sg7 type 0
><5>sd 9:0:0:1: [sdh] Attached SCSI removable disk
><5>sd 9:0:0:1: Attached scsi generic sg8 type 0
><6>ADDRCONF(NETDEV_UP): eth0: link is not ready
><6>tg3: eth0: Link is up at 100 Mbps, half duplex.
><6>tg3: eth0: Flow control is off for TX and off for RX.
><6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
><7>eth0: no IPv6 routers present
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><4>ISOFS: Unable to identify CD-ROM format.
><4>VFS: Can't find an ext2 filesystem on dev loop0.
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><7>SELinux:8192 avtab hash slots allocated. Num of rules:172315
><7>SELinux:8192 avtab hash slots allocated. Num of rules:172315
><7>security:  5 users, 12 roles, 2301 types, 116 bools, 1 sens, 1024 cats
><7>security:  72 classes, 172315 rules
><7>SELinux:  Completing initialization.
><7>SELinux:  Setting up existing superblocks.
><7>SELinux: initialized (dev 0:13, type nfs), uses genfs_contexts
><7>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
><7>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
><7>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
><7>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><7>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
><7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><7>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
><7>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
><7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><7>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><6>SELinux: policy loaded with handle_unknown=allow
><5>type=1403 audit(1210759598.481:2): policy loaded auid=4294967295 ses=4294967295
><6>md: raid0 personality registered for level 0
><6>md: raid1 personality registered for level 1
><6>xor: automatically using best checksumming function: generic_sse
><6>   generic_sse:  7776.000 MB/sec
><6>xor: using function: generic_sse (7776.000 MB/sec)
><6>async_tx: api initialized (async)
><4>raid6: int64x1   2082 MB/s
><4>raid6: int64x2   2648 MB/s
><4>raid6: int64x4   1976 MB/s
><4>raid6: int64x8   1828 MB/s
><4>raid6: sse2x1    2968 MB/s
><4>raid6: sse2x2    3152 MB/s
><4>raid6: sse2x4    6441 MB/s
><4>raid6: using algorithm sse2x4 (6441 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><6>md: raid10 personality registered for level 10
><6>md: linear personality registered for level -1
><4>GFS2 (built May  1 2008 06:08:13) installed
><6>Lock_Nolock (built May  1 2008 06:08:34) installed
><6>JFS: nTxBlock = 8192, nTxLock = 65536
><6>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
><6>SGI XFS Quota Management subsystem
><6>device-mapper: uevent: version 1.0.3
><6>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
><6>device-mapper: multipath: version 1.0.5 loaded
><6>device-mapper: multipath round-robin: version 1.0.0 loaded
><6>device-mapper: multipath emc: version 0.0.3 loaded
><4>mtrr: type mismatch for d8000000,8000000 old: write-back new: write-combining
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda3, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev sda3, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda5, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev sda5, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda7, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev sda7, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda8, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev sda8, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sdb1, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev sdb1, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda5, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev sda5, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda5, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev sda5, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda8, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev sda8, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda7, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev sda7, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sdb1, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev sdb1, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda3, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev sda3, type ext3), uses xattr
><6>Adding 2048248k swap on /dev/sda6.  Priority:-1 extents:1 across:2048248k
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><7>SELinux: initialized (dev loop2, type iso9660), uses genfs_contexts
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><7>SELinux: initialized (dev loop2, type iso9660), uses genfs_contexts
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><7>SELinux: initialized (dev loop2, type iso9660), uses genfs_contexts
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><7>SELinux: initialized (dev loop2, type iso9660), uses genfs_contexts
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><7>SELinux: initialized (dev loop2, type iso9660), uses genfs_contexts
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><7>SELinux: initialized (dev loop2, type iso9660), uses genfs_contexts
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><7>SELinux: initialized (dev loop2, type iso9660), uses genfs_contexts
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><7>SELinux: initialized (dev loop2, type iso9660), uses genfs_contexts
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><7>SELinux: initialized (dev loop1, type iso9660), uses genfs_contexts
><4>inode_doinit_with_dentry:  context_to_sid(unconfined_u:object_r:lib_t:s0) returned 22 for dev=sda5 ino=526899
><4>inode_doinit_with_dentry:  context_to_sid(unconfined_u:object_r:var_t:s0) returned 22 for dev=sda5 ino=2028134
><4>inode_doinit_with_dentry:  context_to_sid(unconfined_u:object_r:var_t:s0) returned 22 for dev=sda5 ino=2028142
><4>inode_doinit_with_dentry:  context_to_sid(unconfined_u:object_r:var_t:s0) returned 22 for dev=sda5 ino=2028132
><4>inode_doinit_with_dentry:  context_to_sid(unconfined_u:object_r:var_t:s0) returned 22 for dev=sda5 ino=2028137
><4>inode_doinit_with_dentry:  context_to_sid(unconfined_u:object_r:var_t:s0) returned 22 for dev=sda5 ino=2028135
><4>inode_doinit_with_dentry:  context_to_sid(unconfined_u:object_r:var_t:s0) returned 22 for dev=sda5 ino=2060383
><4>inode_doinit_with_dentry:  context_to_sid(unconfined_u:object_r:var_t:s0) returned 22 for dev=sda5 ino=2060365
><4>inode_doinit_with_dentry:  context_to_sid(unconfined_u:object_r:var_t:s0) returned 22 for dev=sda5 ino=2060363
><4>inode_doinit_with_dentry:  context_to_sid(unconfined_u:object_r:var_t:s0) returned 22 for dev=sda5 ino=2028164
><4>inode_doinit_with_dentry:  context_to_sid(unconfined_u:object_r:var_t:s0) returned 22 for dev=sda5 ino=2028133
><4>inode_doinit_with_dentry:  context_to_sid(unconfined_u:object_r:var_t:s0) returned 22 for dev=sda5 ino=2028152
><4>inode_doinit_with_dentry:  context_to_sid(unconfined_u:object_r:var_t:s0) returned 22 for dev=sda5 ino=2028139

Actions: View

Attachments on bug 446366: 305347 | 305348