Attachment 305721 Details for Bug 446947 – full dmesg log

full dmesg log

dmesg.log (text/plain), 23.83 KB, created by Zing on 2008-05-16 18:43:23 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Zing

Created: 2008-05-16 18:43:23 UTC

Size: 23.83 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-14.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Thu May 1 06:06:21 EDT 2008
>Command line: ro root=UUID=5b47522e-2ec4-4d73-a678-8f239d4e4a7e selinux=0
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
> BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
> BIOS-e820: 000000003ff70000 - 000000003ff7b000 (ACPI data)
> BIOS-e820: 000000003ff7b000 - 000000003ff80000 (ACPI NVS)
> BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 154) 0 entries of 3200 used
>Entering add_active_range(0, 256, 262000) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI present.
>ACPI: RSDP 000F74D0, 0024 (r2 PTLTD )
>ACPI: XSDT 3FF78CEA, 0044 (r1 PTLTD  	 XSDT    6040000  LTP        0)
>ACPI: FACP 3FF7AE1C, 00F4 (r3 AMD    HAMMER    6040000 PTEC    F4240)
>ACPI: DSDT 3FF78D2E, 207A (r1 AMD-K8  AMDACPI  6040000 MSFT  100000E)
>ACPI: FACS 3FF7BFC0, 0040
>ACPI: HPET 3FF7AF10, 0038 (r1 AMD    HAMMER    6040000 PTEC        0)
>ACPI: APIC 3FF7AF48, 0068 (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: SPCR 3FF7AFB0, 0050 (r1 PTLTD  $UCRTBL$  6040000 PTL         1)
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003ff70000
>Entering add_active_range(0, 0, 154) 0 entries of 3200 used
>Entering add_active_range(0, 256, 262000) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000003ff70000
>  NODE_DATA [000000000000b000 - 0000000000012fff]
>  bootmap [0000000000013000 -  000000000001afef] pages 8
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-75db3b] TEXT DATA BSS
>early res: 3 [37c54000-37feff42] RAMDISK
>early res: 4 [9ac00-9bbff] EBDA
>early res: 5 [8000-afff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      154
>    0:      256 ->   262000
>On node 0 totalpages: 261898
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1382 pages reserved
>  DMA zone: 2556 pages, LIFO batch:0
>  DMA32 zone: 3526 pages used for memmap
>  DMA32 zone: 254378 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x02] address[0xfc000000] gsi_base[24])
>IOAPIC[1]: apic_id 2, address 0xfc000000, GSI 24-27
>ACPI: IOAPIC (id[0x03] address[0xfc001000] gsi_base[28])
>IOAPIC[2]: apic_id 3, address 0xfc001000, GSI 28-31
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x102282a0 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009a000 - 000000000009b000
>PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
>PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 45232 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 256934
>Policy zone: DMA32
>Kernel command line: ro root=UUID=5b47522e-2ec4-4d73-a678-8f239d4e4a7e selinux=0
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>TSC calibrated against PM_TIMER
>time.c: Detected 2392.544 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Node 0: aperture @ 0 size 32 MB
>No AGP bridge found
>Memory: 1023772k/1048000k available (2656k kernel code, 23820k reserved, 1396k data, 356k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4788.70 BogoMIPS (lpj=2394350)
>Security Framework initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 28k freed
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 12461156
>Detected 12.461 MHz APIC timer.
>Brought up 1 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=6272 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000001
>  groups: 00000000,00000001
>net_namespace: 1016 bytes
>Time: 17:54:58  Date: 05/16/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.TP2P._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 10 11) *7
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 5 10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 8 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:parse DMAR table failure.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 32-bit timers, 14318180 Hz
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xe0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:00: iomem range 0xffc00000-0xfff7ffff has been reserved
>system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
>system 00:06: ioport range 0x4d0-0x4d1 has been reserved
>system 00:06: ioport range 0x1100-0x117f has been reserved
>system 00:06: ioport range 0x1180-0x11ff has been reserved
>system 00:06: ioport range 0x300-0x307 has been reserved
>system 00:06: ioport range 0x421-0x42f has been reserved
>system 00:06: ioport range 0xca2-0xca3 has been reserved
>system 00:06: iomem range 0xc0000-0xc7fff has been reserved
>PCI: Bridge: 0000:00:06.0
>  IO window: 2000-2fff
>  MEM window: 0xfc100000-0xfdffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0a.0
>  IO window: 3000-3fff
>  MEM window: 0xfe000000-0xfe0fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0b.0
>  IO window: 4000-4fff
>  MEM window: 0xfe100000-0xfe1fffff
>  PREFETCH window: disabled.
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3695k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1210960498.408:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:0a.0: MSI quirk detected; subordinate MSI disabled
>pci 0000:00:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
>pci 0000:00:0b.0: MSI quirk detected; subordinate MSI disabled
>pci 0000:00:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
>pci 0000:01:05.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: ACPI0007:00 is registered as cooling_device0
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Switched to high resolution mode on CPU 0
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 8:888:946
>  hash matches device tty3
>Freeing unused kernel memory: 356k freed
>Write protecting the kernel read-only data: 1120k
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:01:00.0[D] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:01:00.0: OHCI Host Controller
>ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:01:00.0: irq 19, io mem 0xfc100000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-14.fc9.x86_64 ohci_hcd
>usb usb1: SerialNumber: 0000:01:00.0
>ACPI: PCI Interrupt 0000:01:00.1[D] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:01:00.1: OHCI Host Controller
>ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:01:00.1: irq 19, io mem 0xfc101000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-14.fc9.x86_64 ohci_hcd
>usb usb2: SerialNumber: 0000:01:00.1
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>Fusion MPT base driver 3.04.06
>Copyright (c) 1999-2007 LSI Corporation
>Fusion MPT SPI Host driver 3.04.06
>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 26 (level, low) -> IRQ 26
>mptbase: ioc0: Initiating bringup
>usb 1-1: new low speed USB device using ohci_hcd and address 2
>ioc0: LSI53C1030 B2: Capabilities={Initiator}
>usb 1-1: configuration #1 chosen from 1 choice
>input: USBPS2 as /devices/pci0000:00/0000:00:06.0/0000:01:00.0/usb1/1-1/1-1:1.0/input/input1
>input,hidraw0: USB HID v1.00 Keyboard [USBPS2] on usb-0000:01:00.0-1
>input: USBPS2 as /devices/pci0000:00/0000:00:06.0/0000:01:00.0/usb1/1-1/1-1:1.1/input/input2
>input,hidraw1: USB HID v1.00 Mouse [USBPS2] on usb-0000:01:00.0-1
>usb 1-1: New USB device found, idVendor=0d3d, idProduct=0001
>usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>usb 1-1: Product: USBPS2
>scsi0 : ioc0: LSI53C1030 B2, FwRev=01032316h, Ports=1, MaxQ=222, IRQ=26
>shpchp: HPC vendor_id 1022 device_id 7460 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>libata version 3.00 loaded.
>pata_amd 0000:00:07.1: version 0.3.10
>scsi1 : pata_amd
>scsi2 : pata_amd
>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1020 irq 14
>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1028 irq 15
>ata2.00: ATAPI: CD-224E, 2.9B, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi: waiting for bus probes to complete ...
>scsi 0:0:0:0: Direct-Access     LSILOGIC 1030 IM       IM 1000 PQ: 0 ANSI: 2
>scsi 0:0:8:0: Processor         IBM      25P3495a S320  1 1    PQ: 0 ANSI: 2
> target0:0:8: Beginning Domain Validation
> target0:0:8: Ending Domain Validation
> target0:0:8: asynchronous
>scsi 0:1:0:0: Direct-Access     IBM-ESXS ST336753LC    FN B85D PQ: 0 ANSI: 3
>mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
>mptbase: ioc0:   volume is now optimal, enabled, quiesced
>mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0 id=0
>mptbase: ioc0:   PhysDisk is now online, quiesced
>mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1 id=0
>mptbase: ioc0:   PhysDisk is now online, quiesced
> target0:1:0: Beginning Domain Validation
> target0:1:0: Domain Validation skipping write tests
> target0:1:0: Ending Domain Validation
>mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
>mptbase: ioc0:   volume is now optimal, enabled
>mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0 id=0
>mptbase: ioc0:   PhysDisk is now online
>mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1 id=0
>mptbase: ioc0:   PhysDisk is now online
> target0:1:0: FAST-40 SCSI 40.0 MB/s ST (25 ns, offset 63)
>scsi 0:1:1:0: Direct-Access     IBM-ESXS ST336753LC    FN B85D PQ: 0 ANSI: 3
>mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
>mptbase: ioc0:   volume is now optimal, enabled, quiesced
>mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0 id=0
>mptbase: ioc0:   PhysDisk is now online, quiesced
>mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1 id=0
>mptbase: ioc0:   PhysDisk is now online, quiesced
> target0:1:1: Beginning Domain Validation
> target0:1:1: Ending Domain Validation
>mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
>mptbase: ioc0:   volume is now optimal, enabled
>mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0 id=0
>mptbase: ioc0:   PhysDisk is now online
>mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1 id=0
>mptbase: ioc0:   PhysDisk is now online
> target0:1:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
>sd 0:0:0:0: [sda] 71020544 512-byte hardware sectors (36363 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 03 00 00 08
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 71020544 512-byte hardware sectors (36363 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 03 00 00 08
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 2:0:0:0: CD-ROM            TEAC     CD-224E          2.9B PQ: 0 ANSI: 5
>Emulex LightPulse Fibre Channel SCSI driver 8.2.5
>Copyright(c) 2004-2008 Emulex.  All rights reserved.
>ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 28 (level, low) -> IRQ 28
>scsi3 :  on PCI bus 03 device 18 irq 28
>ACPI: PCI Interrupt 0000:03:03.1[B] -> GSI 29 (level, low) -> IRQ 29
>scsi4 :  on PCI bus 03 device 19 irq 29
>lpfc 0000:03:03.0: 0:1303 Link Up Event x1 received Data: x1 xf7 x10 x0
>scsi 3:0:0:0: Direct-Access     NETAPP   LUN              0.2  PQ: 0 ANSI: 4
>scsi 3:0:1:0: Direct-Access     NETAPP   LUN              0.2  PQ: 0 ANSI: 4
>sd 3:0:0:0: [sdb] 2147483648 512-byte hardware sectors (1099512 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: bd 00 00 08
>sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdb] 2147483648 512-byte hardware sectors (1099512 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: bd 00 00 08
>sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sdb: unknown partition table
>sd 3:0:0:0: [sdb] Attached SCSI disk
>sd 3:0:1:0: [sdc] 2147483648 512-byte hardware sectors (1099512 MB)
>sd 3:0:1:0: [sdc] Write Protect is off
>sd 3:0:1:0: [sdc] Mode Sense: bd 00 00 08
>sd 3:0:1:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:1:0: [sdc] 2147483648 512-byte hardware sectors (1099512 MB)
>sd 3:0:1:0: [sdc] Write Protect is off
>sd 3:0:1:0: [sdc] Mode Sense: bd 00 00 08
>sd 3:0:1:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sdc: unknown partition table
>sd 3:0:1:0: [sdc] Attached SCSI disk
>device-mapper: multipath: version 1.0.5 loaded
>device-mapper: multipath round-robin: version 1.0.0 loaded
>scsi: waiting for bus probes to complete ...
>lpfc 0000:03:03.1: 1:1303 Link Up Event x1 received Data: x1 xf7 x10 x0
>scsi 4:0:0:0: Direct-Access     NETAPP   LUN              0.2  PQ: 0 ANSI: 4
>scsi 4:0:1:0: Direct-Access     NETAPP   LUN              0.2  PQ: 0 ANSI: 4
>sd 4:0:0:0: [sdd] 2147483648 512-byte hardware sectors (1099512 MB)
>sd 4:0:0:0: [sdd] Write Protect is off
>sd 4:0:0:0: [sdd] Mode Sense: bd 00 00 08
>sd 4:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sdd] 2147483648 512-byte hardware sectors (1099512 MB)
>sd 4:0:0:0: [sdd] Write Protect is off
>sd 4:0:0:0: [sdd] Mode Sense: bd 00 00 08
>sd 4:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sdd: unknown partition table
>sd 4:0:0:0: [sdd] Attached SCSI disk
>sd 4:0:1:0: [sde] 2147483648 512-byte hardware sectors (1099512 MB)
>sd 4:0:1:0: [sde] Write Protect is off
>sd 4:0:1:0: [sde] Mode Sense: bd 00 00 08
>sd 4:0:1:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:1:0: [sde] 2147483648 512-byte hardware sectors (1099512 MB)
>sd 4:0:1:0: [sde] Write Protect is off
>sd 4:0:1:0: [sde] Mode Sense: bd 00 00 08
>sd 4:0:1:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sde: unknown partition table
>sd 4:0:1:0: [sde] Attached SCSI disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ACPI: Power Button (CM) [PWRB]
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 0:0:8:0: Attached scsi generic sg1 type 3
>scsi 0:1:0:0: Attached scsi generic sg2 type 0
>scsi 0:1:1:0: Attached scsi generic sg3 type 0
>sr 2:0:0:0: Attached scsi generic sg4 type 5
>sd 3:0:0:0: Attached scsi generic sg5 type 0
>sd 3:0:1:0: Attached scsi generic sg6 type 0
>sd 4:0:0:0: Attached scsi generic sg7 type 0
>sd 4:0:1:0: Attached scsi generic sg8 type 0
>AMD768 RNG detected
>tg3.c:v3.90 (April 12, 2008)
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 24 (level, low) -> IRQ 24
>eth0: Tigon3 [partno(BCM95704A6) rev 2003 PHY(5701)] (PCIX:100MHz:64-bit) 10/100/1000Base-T Ethernet 00:0d:60:14:9c:14
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[0]
>eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
>ACPI: PCI Interrupt 0000:02:01.1[B] -> GSI 25 (level, low) -> IRQ 25
>eth1: Tigon3 [partno(BCM95704A6) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000Base-T Ethernet 00:0d:60:14:9c:15
>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
>input: PC Speaker as /devices/platform/pcspkr/input/input5
>multipath.stati[1330]: segfault at 188 ip 472067 sp 7fffcaa9c508 error 4 in multipath.static[400000+e9000]
>loop: module loaded
>EXT3 FS on sda1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 524280k swap on /dev/mapper/mainvg-swaplv.  Priority:-1 extents:1 across:524280k
>powernow-k8: Found 1 AMD Opteron(tm) Processor 250 processors (1 cpu cores) (version 2.20.00)
>powernow-k8: BIOS error - no PSB or ACPI _PSS objects
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>multipathd[1778]: segfault at 188 ip 41352a sp 7fff5715f7f0 error 4 in multipathd[400000+38000]
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>Fusion MPT misc device (ioctl) driver 3.04.06
>mptctl: Registered with Fusion MPT base driver
>mptctl: /dev/mptctl @ (major,minor=10,220)
>eth0: no IPv6 routers present
> rport-3:0-4: blocked FC remote port time out: removing rport
> rport-4:0-4: blocked FC remote port time out: removing rport
>multipath[2474]: segfault at 188 ip ad4136 sp 7fffed9afb18 error 4 in libc-2.8.so[a53000+162000]
>multipath[2545]: segfault at 188 ip ad4136 sp 7fff5f85e9c8 error 4 in libc-2.8.so[a53000+162000]
>multipathd[2602]: segfault at 188 ip 41352a sp 7fffe0d85500 error 4 in multipathd[400000+38000]
>multipathd[2660]: segfault at 188 ip 41352a sp 7ffff9e26f40 error 4 in multipathd[400000+38000]
>multipathd[2669]: segfault at 188 ip 41352a sp 7fff43638730 error 4 in multipathd[400000+38000]
>multipathd[2832]: segfault at 188 ip 41352a sp 7fff80b2db80 error 4 in multipathd[400000+38000]
>multipathd[2867]: segfault at 188 ip 41352a sp 7fff5313e190 error 4 in multipathd[400000+38000]
>multipath[2872]: segfault at 188 ip 7f5972ee3136 sp 7fff7b1db2b8 error 4 in libc-2.8.so[7f5972e62000+162000]

Actions: View

Attachments on bug 446947: 305720 | 305721 | 305723 | 309955 | 309956 | 309957