Attachment 305797 Details for Bug 447039 – dmesg-2.6.26-0.13.rc2.git5.fc10.x86_64.txt with backtrace

dmesg-2.6.26-0.13.rc2.git5.fc10.x86_64.txt with backtrace

dmesg-2.6.26-0.13.rc2.git5.fc10.x86_64.txt (text/plain), 37.30 KB, created by Joachim Frieben on 2008-05-17 10:54:05 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Joachim Frieben

Created: 2008-05-17 10:54:05 UTC

Size: 37.30 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.26-0.13.rc2.git5.fc10.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Fri May 16 17:52:54 EDT 2008
>Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet sda=20023,255,63
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000098000 (usable)
> BIOS-e820: 0000000000098000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
> BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
> BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
> BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 152) 0 entries of 25600 used
>Entering add_active_range(0, 256, 524000) 1 entries of 25600 used
>max_pfn_mapped = 1048576
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping
>DMI 2.3 present.
>ACPI: RSDP 000F7A90, 0014 (r0 Nvidia)
>ACPI: RSDT 7FEE3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 7FEE30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 7FEE3180, 64F5 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 7FEE0000, 0040
>ACPI: SRAT 7FEE98C0, 0090 (r1 AMD    HAMMER          1 AMD         1)
>ACPI: MCFG 7FEE99C0, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC 7FEE96C0, 006C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>SRAT: PXM 0 -> APIC 0 -> Node 0
>SRAT: Node 0 PXM 0 0-a0000
>Entering add_active_range(0, 0, 152) 0 entries of 25600 used
>SRAT: Node 0 PXM 0 100000-80000000
>Entering add_active_range(0, 256, 524000) 1 entries of 25600 used
>NUMA: Allocated memnodemap from c000 - d080
>NUMA: Using 20 for the hash shift.
>Bootmem setup node 0 0000000000000000-000000007fee0000
>  NODE_DATA [000000000000d080 - 000000000002207f]
>  bootmap [0000000000023000 -  0000000000032fdf] pages 10
>  early res: 0 [0-fff] BIOS data page
>  early res: 1 [6000-7fff] TRAMPOLINE
>  early res: 2 [200000-dea9e7] TEXT DATA BSS
>  early res: 3 [37c80000-37fef658] RAMDISK
>  early res: 4 [9f800-fffff] BIOS reserved
>  early res: 5 [8000-bfff] PGTABLE
>  early res: 6 [c000-d07f] MEMNODEMAP
> [ffffe20000000000-ffffe20002ffffff] PMD -> [ffff810001200000-ffff8100041fffff] on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      152
>    0:      256 ->   524000
>On node 0 totalpages: 523896
>  DMA zone: 96 pages used for memmap
>  DMA zone: 3156 pages reserved
>  DMA zone: 740 pages, LIFO batch:0
>  DMA32 zone: 12185 pages used for memmap
>  DMA32 zone: 507719 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
>SMP: Allowing 2 CPUs, 1 hotplug CPUs
>PERCPU: Allocating 437808 bytes of per cpu data
>NR_CPUS: 64, nr_cpu_ids: 2
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 508459
>Policy zone: DMA32
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet sda=20023,255,63
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 1004.628 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1712 kB
> per task-struct memory footprint: 3456 bytes
>Checking aperture...
>Node 0: aperture @ 0 size 32 MB
>No AGP bridge found
>Memory: 2029420k/2096000k available (2785k kernel code, 66164k reserved, 1573k data, 1320k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 2011.45 BogoMIPS (lpj=1005727)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>ACPI: Core revision 20080321
>CPU0: AMD Opteron(tm) Processor 146 stepping 01
>Using local APIC timer interrupts.
>APIC timer calibration result 12557853
>Detected 12.557 MHz APIC timer.
>Brought up 1 CPUs
>Total of 1 processors activated (2011.45 BogoMIPS).
>sizeof(vma)=176 bytes
>sizeof(page)=96 bytes
>sizeof(inode)=1088 bytes
>sizeof(dentry)=256 bytes
>sizeof(ext3inode)=1488 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=9560 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0
>  groups: 0
>khelper used greatest stack depth: 6072 bytes left
>net_namespace: 1352 bytes
>Time: 12:05:48  Date: 05/17/08
>NET: Registered protocol family 16
>No dock devices found.
>khelper used greatest stack depth: 6008 bytes left
>node 0 link 0: io port [6000, ffff]
>TOM: 0000000080000000 aka 2048M
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [feb00000, fec0ffff]
>node 0 link 0: mmio [80000000, febfffff]
>node 0 link 0: mmio [e0000000, e05fffff]
>bus: [00,05] on node 0 link 0
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [a0000, bffff]
>bus: 00 index 2 mmio: [80000000, fcffffffff]
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG at e0000000 - efffffff
>PCI: Using configuration type 1 for base access
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:09.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 3 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LPCA] (IRQs 3 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:parse DMAR table failure.
>ACPI: RTC can wake from S4
>system 00:01: ioport range 0x1000-0x107f has been reserved
>system 00:01: ioport range 0x1080-0x10ff has been reserved
>system 00:01: ioport range 0x1400-0x147f has been reserved
>system 00:01: ioport range 0x1480-0x14ff has been reserved
>system 00:01: ioport range 0x1800-0x187f has been reserved
>system 00:01: ioport range 0x1880-0x18ff has been reserved
>system 00:01: iomem range 0xa0000000-0x9fffffff could not be reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0xca0-0xcaf has been reserved
>system 00:02: ioport range 0x800-0x87f has been reserved
>system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:0e: iomem range 0xd1800-0xd3fff has been reserved
>system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
>system 00:0e: iomem range 0x7fee0000-0x7fefffff could not be reserved
>system 00:0e: iomem range 0xffff0000-0xffffffff could not be reserved
>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>system 00:0e: iomem range 0x100000-0x7fedffff could not be reserved
>system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:0e: iomem range 0xfee00000-0xfeefffff could not be reserved
>system 00:0e: iomem range 0xfefff000-0xfeffffff could not be reserved
>system 00:0e: iomem range 0xfff80000-0xfff80fff could not be reserved
>system 00:0e: iomem range 0xfff90000-0xfffbffff could not be reserved
>system 00:0e: iomem range 0xfffed000-0xfffeffff could not be reserved
>PCI: Bridge: 0000:00:09.0
>  IO window: a000-afff
>  MEM window: 0xfc000000-0xfdffffff
>  PREFETCH window: 0x00000000fea00000-0x00000000feafffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: 9000-9fff
>  MEM window: 0xfe900000-0xfe9fffff
>  PREFETCH window: 0x00000000fe800000-0x00000000fe8fffff
>PCI: Bridge: 0000:00:0c.0
>  IO window: 8000-8fff
>  MEM window: 0xfe700000-0xfe7fffff
>  PREFETCH window: 0x00000000fe600000-0x00000000fe6fffff
>PCI: Bridge: 0000:00:0d.0
>  IO window: 7000-7fff
>  MEM window: 0xfe500000-0xfe5fffff
>  PREFETCH window: 0x00000000fe400000-0x00000000fe4fffff
>PCI: Bridge: 0000:00:0e.0
>  IO window: 6000-6fff
>  MEM window: 0xfe300000-0xfe3fffff
>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 3517k freed
>khelper used greatest stack depth: 5736 bytes left
>audit: initializing netlink socket (disabled)
>type=2000 audit(1211025948.753:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 3970 for ipc namespace ffffffff81407370
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:00.0: Enabling HT MSI Mapping
>pci 0000:00:0b.0: Enabling HT MSI Mapping
>pci 0000:00:0b.0: Found enabled HT MSI Mapping
>pci 0000:00:0b.0: Linking AER extended capability
>pci 0000:00:0c.0: Enabling HT MSI Mapping
>pci 0000:00:0c.0: Found enabled HT MSI Mapping
>pci 0000:00:0c.0: Linking AER extended capability
>pci 0000:00:0d.0: Enabling HT MSI Mapping
>pci 0000:00:0d.0: Found enabled HT MSI Mapping
>pci 0000:00:0d.0: Linking AER extended capability
>pci 0000:00:0e.0: Enabling HT MSI Mapping
>pci 0000:00:0e.0: Found enabled HT MSI Mapping
>pci 0000:00:0e.0: Linking AER extended capability
>pci 0000:05:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0b.0:pcie00]
>Allocate Port Service[0000:00:0b.0:pcie03]
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0c.0:pcie00]
>Allocate Port Service[0000:00:0c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0d.0:pcie00]
>Allocate Port Service[0000:00:0d.0:pcie03]
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0e.0:pcie00]
>Allocate Port Service[0000:00:0e.0:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: PNP0C0B:00 is registered as cooling_device0
>ACPI: Fan [FAN] (on)
>ACPI: ACPI0007:00 is registered as cooling_device1
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (40 C)
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 8:56:77
>Freeing unused kernel memory: 1320k freed
>Write protecting the kernel read-only data: 3980k
>ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.1: reset hcs_params 0x101488 dbg=1 cc=1 pcc=4 !ppc ports=8
>ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 0 0 
>ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park
>ehci_hcd 0000:00:02.1: park 0
>ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:02.1: bogus port configuration: cc=1 x pcc=4 < ports=8
>ehci_hcd 0000:00:02.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: supports USB remote wakeup
>ehci_hcd 0000:00:02.1: irq 23, io mem 0xfeb00000
>ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:02.1: init command 010009 (park)=0 ithresh=1 period=256 RUN
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: default language 0x0409
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.26-0.13.rc2.git5.fc10.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:02.1
>modprobe used greatest stack depth: 4112 bytes left
>hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 80 td 96
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: created debug files
>ohci_hcd 0000:00:02.0: irq 22, io mem 0xfebff000
>ohci_hcd 0000:00:02.0: OHCI controller state
>ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
>ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
>ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
>ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH
>ohci_hcd 0000:00:02.0: hcca frame #0003
>ohci_hcd 0000:00:02.0: roothub.a 01000208 POTPGT=1 NPS NDP=8(8)
>ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
>ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [6] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [7] 0x00000100 PPS
>usb usb2: default language 0x0409
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: global over-current protection
>hub 2-0:1.0: power on to power good time: 2ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: no over-current condition exists
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.26-0.13.rc2.git5.fc10.x86_64 ohci_hcd
>usb usb2: SerialNumber: 0000:00:02.0
>hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0000
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>pata_amd 0000:00:06.0: version 0.3.10
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>scsi0 : pata_amd
>scsi1 : pata_amd
>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
>input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2
>ata1.00: ATA-7: HDT722516DLAT80, V43OA96A, max UDMA/133
>ata1.00: 321672960 sectors, multi 16: LBA48 
>ata1: nv_mode_filter: 0x7f39f&0x7f01f->0x7f01f, BIOS=0x7f000 (0xc700c000) ACPI=0x7f01f (15:600:0x13)
>ata1.00: configured for UDMA/133
>ata2.01: both IDENTIFYs aborted, assuming NODEV
>ata2.00: ATAPI: HITACHI DVD-ROM GD-7500, 0008, max UDMA/33
>ata2: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc700c000) ACPI=0x701f (60:600:0x13)
>ata2.00: configured for UDMA/33
>isa bounce pool size: 16 pages
>scsi 0:0:0:0: Direct-Access     ATA      HDT722516DLAT80  V43O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            HITACHI  DVD-ROM GD-7500  0008 PQ: 0 ANSI: 5
>modprobe used greatest stack depth: 2832 bytes left
>ohci_hcd 0000:00:02.0: auto-stop root hub
>hub 1-0:1.0: hub_suspend
>usb usb1: bus auto-suspend
>ehci_hcd 0000:00:02.1: suspend root hub
>hub 2-0:1.0: hub_suspend
>usb usb2: bus auto-suspend
>ohci_hcd 0000:00:02.0: suspend root hub
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>ACPI: PCI interrupt for device 0000:00:07.0 disabled
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>ACPI: PCI interrupt for device 0000:00:08.0 disabled
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: 8192 avtab hash slots, 165481 rules.
>SELinux: 8192 avtab hash slots, 165481 rules.
>SELinux:  8 users, 12 roles, 2301 types, 113 bools, 1 sens, 1024 cats
>SELinux:  72 classes, 165481 rules
>SELinux:  permission open in class dir not defined in policy
>SELinux:  permission open in class file not defined in policy
>SELinux:  permission open in class chr_file not defined in policy
>SELinux:  permission open in class blk_file not defined in policy
>SELinux:  permission open in class fifo_file not defined in policy
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1211025957.704:2): policy loaded auid=4294967295 ses=4294967295
>usb usb2: uevent
>usb 2-0:1.0: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ACPI: Power Button (CM) [PWRB]
>sata_nv 0000:00:07.0: version 3.5
>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 21
>ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 21
>ata3: SATA link down (SStatus 0 SControl 300)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>ata4: SATA link down (SStatus 0 SControl 300)
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>scsi4 : sata_nv
>scsi5 : sata_nv
>ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 20
>ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 20
>ata5: SATA link down (SStatus 0 SControl 300)
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 14x/40x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ata6: SATA link down (SStatus 0 SControl 300)
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:e0:81:5f:8a:cc
>forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
>ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
>ath5k_pci 0000:01:0a.0: registered as 'phy0'
>input: PC Speaker as /devices/platform/pcspkr/input/input5
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>phy0: Selected rate control algorithm 'pid'
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
>firewire_ohci: Added fw-ohci device 0000:01:06.0, OHCI version 1.10
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>tg3.c:v3.92 (May 2, 2008)
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>eth1: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:e0:81:5f:8a:cb
>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth1: dma_rwctrl[76180000] dma_mask[64-bit]
>intel8x0_measure_ac97_clock: measured 51673 usecs
>intel8x0: clocking to 46798
>firewire_core: created device fw0: GUID 00e081000026c505, S400
>ppdev: user-space parallel port driver
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>kjournald2 starting.  Commit interval 5 seconds
>EXT4 FS on dm-1, internal journal
>EXT4-fs: mounted filesystem with ordered data mode.
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>SELinux: initialized (dev dm-1, type ext4dev), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>[drm] Initialized radeon 1.28.0 20060524 on minor 0
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>Adding 4194296k swap on /dev/mapper/VolGroup00-LogVol03.  Priority:-1 extents:1 across:4194296k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>powernow-k8: Found 1 AMD Opteron(tm) Processor 146 processors (1 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0x2 (1000 MHz), vid 0xe
>powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x8
>powernow-k8:    2 : fid 0xc (2000 MHz), vid 0x6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>usb usb2: usb auto-resume
>ohci_hcd 0000:00:02.0: resume root hub
>hub 2-0:1.0: hub_resume
>usb usb1: usb auto-resume
>ehci_hcd 0000:00:02.1: resume root hub
>hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0000
>hub 1-0:1.0: hub_resume
>hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
>ohci_hcd 0000:00:02.0: auto-stop root hub
>hub 2-0:1.0: hub_suspend
>usb usb2: bus auto-suspend
>ohci_hcd 0000:00:02.0: suspend root hub
>hub 1-0:1.0: hub_suspend
>usb usb1: bus auto-suspend
>ehci_hcd 0000:00:02.1: suspend root hub
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>eth0: no IPv6 routers present
>mtrr: no MTRR for d0000000,8000000 found
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>Marking TSC unstable due to cpufreq changes
>Clocksource tsc unstable (delta = 88788425 ns)
>
>=======================================================
>[ INFO: possible circular locking dependency detected ]
>2.6.26-0.13.rc2.git5.fc10.x86_64 #1
>-------------------------------------------------------
>ksoftirqd/0/4 is trying to acquire lock:
> (&pcsp_chip.substream_lock){++..}, at: [<ffffffffa0265333>] pcsp_do_timer+0x5a/0x2b3 [snd_pcsp]
>
>but task is already holding lock:
> (&cpu_base->lock){++..}, at: [<ffffffff8104e0a8>] hrtimer_interrupt+0x79/0x14f
>
>which lock already depends on the new lock.
>
>
>the existing dependency chain (in reverse order) is:
>
>-> #4 (&cpu_base->lock){++..}:
>       [<ffffffff81058334>] __lock_acquire+0xbcf/0xd5f
>       [<ffffffff81058522>] lock_acquire+0x5e/0x78
>       [<ffffffff812b1e5d>] _spin_lock_irqsave+0x36/0x69
>       [<ffffffff8104da9a>] lock_hrtimer_base+0x25/0x4b
>       [<ffffffff8104dc76>] hrtimer_start+0x24/0x15e
>       [<ffffffff8102dccc>] enqueue_rt_entity+0x212/0x23d
>       [<ffffffff8102dfcd>] enqueue_task_rt+0x60/0x89
>       [<ffffffff81027844>] enqueue_task+0x4d/0x58
>       [<ffffffff81027871>] activate_task+0x22/0x2a
>       [<ffffffff8102ceab>] try_to_wake_up+0x186/0x1dd
>       [<ffffffff8102cf2e>] wake_up_process+0x10/0x12
>       [<ffffffff812ac90c>] migration_call+0xdf/0x4d3
>       [<ffffffff815164e7>] migration_init+0x46/0x57
>       [<ffffffff815035ce>] kernel_init+0x5f/0x344
>       [<ffffffff8100cec8>] child_rip+0xa/0x12
>       [<ffffffffffffffff>] 0xffffffffffffffff
>
>-> #3 (&rt_b->rt_runtime_lock){+...}:
>       [<ffffffff81058334>] __lock_acquire+0xbcf/0xd5f
>       [<ffffffff81058522>] lock_acquire+0x5e/0x78
>       [<ffffffff812b1d47>] _spin_lock+0x26/0x53
>       [<ffffffff8102dc99>] enqueue_rt_entity+0x1df/0x23d
>       [<ffffffff8102dfcd>] enqueue_task_rt+0x60/0x89
>       [<ffffffff81027844>] enqueue_task+0x4d/0x58
>       [<ffffffff81027871>] activate_task+0x22/0x2a
>       [<ffffffff8102ceab>] try_to_wake_up+0x186/0x1dd
>       [<ffffffff8102cf2e>] wake_up_process+0x10/0x12
>       [<ffffffff812ac90c>] migration_call+0xdf/0x4d3
>       [<ffffffff815164e7>] migration_init+0x46/0x57
>       [<ffffffff815035ce>] kernel_init+0x5f/0x344
>       [<ffffffff8100cec8>] child_rip+0xa/0x12
>       [<ffffffffffffffff>] 0xffffffffffffffff
>
>-> #2 (&rq->rq_lock_key){++..}:
>       [<ffffffff81058334>] __lock_acquire+0xbcf/0xd5f
>       [<ffffffff81058522>] lock_acquire+0x5e/0x78
>       [<ffffffff812b1d47>] _spin_lock+0x26/0x53
>       [<ffffffff8102c5a4>] task_rq_lock+0x42/0x78
>       [<ffffffff8102cd59>] try_to_wake_up+0x34/0x1dd
>       [<ffffffff8102cf2e>] wake_up_process+0x10/0x12
>       [<ffffffff8103c1b8>] __tasklet_schedule+0x86/0xa6
>       [<ffffffffa02651d1>] snd_pcsp_trigger+0xac/0xbe [snd_pcsp]
>       [<ffffffffa0146b97>] snd_pcm_do_start+0x27/0x29 [snd_pcm]
>       [<ffffffffa0146ad5>] snd_pcm_action_single+0x2d/0x5b [snd_pcm]
>       [<ffffffffa0148779>] snd_pcm_action_lock_irq+0x86/0xac [snd_pcm]
>       [<ffffffffa014aebe>] snd_pcm_common_ioctl1+0x4c0/0xcee [snd_pcm]
>       [<ffffffffa014bbe3>] snd_pcm_playback_ioctl1+0x252/0x26f [snd_pcm]
>       [<ffffffffa014c49e>] snd_pcm_playback_ioctl+0x2e/0x36 [snd_pcm]
>       [<ffffffff810bdf9a>] vfs_ioctl+0x2a/0x78
>       [<ffffffff810be239>] do_vfs_ioctl+0x251/0x26b
>       [<ffffffff810be2a8>] sys_ioctl+0x55/0x79
>       [<ffffffff8100c120>] tracesys+0xd5/0xda
>       [<ffffffffffffffff>] 0xffffffffffffffff
>
>-> #1 (&substream->self_group.lock){.+..}:
>       [<ffffffffffffffff>] 0xffffffffffffffff
>
>-> #0 (&pcsp_chip.substream_lock){++..}:
>       [<ffffffffffffffff>] 0xffffffffffffffff
>
>other info that might help us debug this:
>
>1 lock held by ksoftirqd/0/4:
> #0:  (&cpu_base->lock){++..}, at: [<ffffffff8104e0a8>] hrtimer_interrupt+0x79/0x14f
>
>stack backtrace:
>Pid: 4, comm: ksoftirqd/0 Not tainted 2.6.26-0.13.rc2.git5.fc10.x86_64 #1
>
>Call Trace:
> <IRQ>  [<ffffffff810574ca>] print_circular_bug_tail+0x70/0x7b
> [<ffffffff810572e2>] ? print_circular_bug_entry+0x48/0x4f
> [<ffffffff81058237>] __lock_acquire+0xad2/0xd5f
> [<ffffffff81011dc7>] ? native_sched_clock+0x50/0x6d
> [<ffffffff81011dc7>] ? native_sched_clock+0x50/0x6d
> [<ffffffff8104dffe>] ? ktime_get+0x11/0x42
> [<ffffffff81058522>] lock_acquire+0x5e/0x78
> [<ffffffffa0265333>] ? :snd_pcsp:pcsp_do_timer+0x5a/0x2b3
> [<ffffffff812b1e5d>] _spin_lock_irqsave+0x36/0x69
> [<ffffffff812b1bf1>] ? _spin_unlock_irq+0x2b/0x30
> [<ffffffffa02652d9>] ? :snd_pcsp:pcsp_do_timer+0x0/0x2b3
> [<ffffffffa0265333>] :snd_pcsp:pcsp_do_timer+0x5a/0x2b3
> [<ffffffff8104e128>] ? hrtimer_interrupt+0xf9/0x14f
> [<ffffffffa02652d9>] ? :snd_pcsp:pcsp_do_timer+0x0/0x2b3
> [<ffffffff8104d4bc>] __run_hrtimer+0x79/0xa7
> [<ffffffff8104e113>] hrtimer_interrupt+0xe4/0x14f
> [<ffffffff8101aa65>] smp_apic_timer_interrupt+0x85/0xa3
> [<ffffffff8100cceb>] apic_timer_interrupt+0x6b/0x70
> <EOI>  [<ffffffff812b1c38>] ? _spin_unlock_irqrestore+0x42/0x47
> [<ffffffff8104db82>] ? hrtimer_try_to_cancel+0x85/0x92
> [<ffffffff8104dba3>] ? hrtimer_cancel+0x14/0x20
> [<ffffffff812aeef6>] ? schedule+0x135/0x825
> [<ffffffff8100e4d8>] ? do_softirq+0x84/0x8a
> [<ffffffff8103c28d>] ? ksoftirqd+0x34/0xcf
> [<ffffffff8103c259>] ? ksoftirqd+0x0/0xcf
> [<ffffffff8104a9e7>] ? kthread+0x49/0x76
> [<ffffffff8100cec8>] ? child_rip+0xa/0x12
> [<ffffffff8100c5df>] ? restore_args+0x0/0x30
> [<ffffffff8104a99e>] ? kthread+0x0/0x76
> [<ffffffff8100cebe>] ? child_rip+0x0/0x12
>
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

Actions: View

Attachments on bug 447039: 305797