Attachment 306326 Details for Bug 447826 – dmesg output after Recursive Fault

dmesg output after Recursive Fault

kernel.dmesg (text/plain), 49.41 KB, created by Nigel Jones on 2008-05-21 23:13:20 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Nigel Jones

Created: 2008-05-21 23:13:20 UTC

Size: 49.41 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25.3-18.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Tue May 13 04:54:47 EDT 2008
>Command line: ro root=UUID=222bf89b-2f86-4c1a-bdad-547a81f6794c quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
> BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data)
> BIOS-e820: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS)
> BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 851840) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
>end_pfn_map = 1245184
>DMI 2.4 present.
>ACPI: RSDP 000FBD90, 0014 (r0 ACPIAM)
>ACPI: RSDT CFF80000, 0040 (r1 NEC              5000730 MSFT       97)
>ACPI: FACP CFF80200, 0084 (r2 A_M_I_ OEMFACP   5000730 MSFT       97)
>ACPI: DSDT CFF805C0, 7A0C (r1  A0807 A0807000        0 INTL 20060113)
>ACPI: FACS CFF8E000, 0040
>ACPI: APIC CFF80390, 006C (r1 A_M_I_ OEMAPIC   5000730 MSFT       97)
>ACPI: MCFG CFF80400, 003C (r1 A_M_I_ OEMMCFG   5000730 MSFT       97)
>ACPI: SLIC CFF80440, 0176 (r1 NEC              5000730 MSFT       97)
>ACPI: OEMB CFF8E040, 0081 (r1 A_M_I_ AMI_OEM   5000730 MSFT       97)
>ACPI: HPET CFF87FD0, 0038 (r1 A_M_I_ OEMHPET   5000730 MSFT       97)
>ACPI: OSFR CFF88010, 00B0 (r1 A_M_I_ OEMOSFR   5000730 MSFT       97)
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000130000000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 851840) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000130000000
>  NODE_DATA [000000000000e000 - 0000000000015fff]
>  bootmap [0000000000016000 -  000000000003bfff] pages 26
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-75db3b] TEXT DATA BSS
>early res: 3 [37d17000-37fefb75] RAMDISK
>early res: 4 [9f800-a07ff] EBDA
>early res: 5 [8000-dfff] PGTABLE
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
> [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
> [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
> [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
> [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
> [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
> [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
> [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
> [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
> [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
> [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006e00000 on node 0
> [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007200000 on node 0
> [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007600000 on node 0
> [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007a00000 on node 0
> [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007e00000 on node 0
> [ffffe20004200000-ffffe200043fffff] PMD ->ffff810008200000 on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1245184
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   851840
>    0:  1048576 ->  1245184
>On node 0 totalpages: 1048351
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1385 pages reserved
>  DMA zone: 2558 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 833464 pages, LIFO batch:31
>  Normal zone: 2688 pages used for memmap
>  Normal zone: 193920 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0xffffffff base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000
>PM: Registered nosave memory: 00000000cff8e000 - 00000000cffe0000
>PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
>PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
>PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
>PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
>Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 45232 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1029942
>Policy zone: Normal
>Kernel command line: ro root=UUID=222bf89b-2f86-4c1a-bdad-547a81f6794c quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 2669.783 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x8421000 - 0xc421000
>Memory: 4059012k/4980736k available (2657k kernel code, 134392k reserved, 1395k data, 356k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 5342.49 BogoMIPS (lpj=2671248)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 20857676
>Detected 20.857 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5339.43 BogoMIPS (lpj=2669718)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=224 bytes
>sizeof(task_struct)=6272 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000001 00000000,00000002
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000003
>  groups: 00000000,00000002 00000000,00000001
>  domain 1: span 00000000,00000003
>   groups: 00000000,00000003
>net_namespace: 1016 bytes
>Time:  9:10:55  Date: 05/21/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  62, should be 59 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>system 00:07: ioport range 0x290-0x297 has been reserved
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x800-0x87f has been reserved
>system 00:08: ioport range 0x480-0x4bf has been reserved
>system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
>system 00:08: iomem range 0xffa00000-0xffafffff has been reserved
>system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
>system 00:08: iomem range 0xffe00000-0xffefffff has been reserved
>system 00:08: iomem range 0xfff00000-0xfffffffe could not be reserved
>system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>system 00:0e: iomem range 0xc0000-0xcffff has been reserved
>system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
>system 00:0e: iomem range 0x0-0x0 could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: 0xfc000000-0xfe9fffff
>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: 0x00000000faf00000-0x00000000faffffff
>PCI: Bridge: 0000:00:1c.4
>  IO window: e000-efff
>  MEM window: 0xfeb00000-0xfebfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: disabled.
>  MEM window: 0xfea00000-0xfeafffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2914k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1211361055.393:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT CFF8E0D0, 01D2 (r1    AMI   CPU1PM        1 INTL 20060113)
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: SSDT CFF8E2B0, 0143 (r1    AMI   CPU2PM        1 INTL 20060113)
>ACPI: ACPI0007:01 is registered as cooling_device1
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 8:141:172
>  hash matches device 0000:00:1c.0:pcie00
>Freeing unused kernel memory: 356k freed
>Write protecting the kernel read-only data: 1120k
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 1-0:1.0: unable to enumerate USB device on port 1
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 1-0:1.0: unable to enumerate USB device on port 2
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.2 to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000dc00
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1a.2
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d080
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb 1-4: new high speed USB device using ehci_hcd and address 4
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d400
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>usb 1-4: configuration #1 chosen from 1 choice
>usb 1-4: New USB device found, idVendor=059b, idProduct=0275
>usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-4: Product: External HD
>usb 1-4: Manufacturer: Iomega
>usb 1-4: SerialNumber: 44A302A8
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.2
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>ACPI: PCI interrupt for device 0000:03:00.0 disabled
>usb 2-3: new high speed USB device using ehci_hcd and address 2
>usb 2-3: configuration #1 chosen from 1 choice
>usb 2-3: New USB device found, idVendor=1516, idProduct=8628
>usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-3: Product: MicroDrive 2GB
>usb 2-3: Manufacturer: DSE
>usb 2-3: SerialNumber: 00000000000000006CB02AE3
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input1
>input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:1a.0-1
>usb 3-1: New USB device found, idVendor=045e, idProduct=00e1
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: Microsoft Wireless Optical Mouse® 1.00
>usb 3-1: Manufacturer: Microsoft
>usb 3-2: new low speed USB device using uhci_hcd and address 3
>usb 3-2: configuration #1 chosen from 1 choice
>input: Cypress Cypress PS/2 Keyboard - PS/2 Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2
>input,hidraw1: USB HID v1.00 Keyboard [Cypress Cypress PS/2 Keyboard - PS/2 Mouse] on usb-0000:00:1a.0-2
>input: Cypress Cypress PS/2 Keyboard - PS/2 Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input3
>input,hidraw2: USB HID v1.00 Mouse [Cypress Cypress PS/2 Keyboard - PS/2 Mouse] on usb-0000:00:1a.0-2
>usb 3-2: New USB device found, idVendor=04b4, idProduct=8081
>usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-2: Product: Cypress PS/2 Keyboard - PS/2 Mouse
>usb 3-2: Manufacturer: Cypress
>ata_piix 0000:00:1f.2: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
>ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 22
>ata2: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 22
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: WDC WD3200AAKS-00TMA0, 12.01C01, max UDMA/133
>ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATA-7: ST3750330AS, SD04, max UDMA/133
>ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      ST3750330AS      SD04 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
>sd 1:0:0:0: [sdb] Attached SCSI disk
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 22 (level, low) -> IRQ 22
>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc480 irq 22
>ata4: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc488 irq 22
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATAPI: ASUS    DRW-1814BLT, 1.04, max UDMA/66
>ata3.00: configured for UDMA/66
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 2:0:0:0: CD-ROM            ASUS     DRW-1814BLT      1.04 PQ: 0 ANSI: 5
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: sdb2: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 223500
>ext3_orphan_cleanup: deleting unreferenced inode 223520
>ext3_orphan_cleanup: deleting unreferenced inode 33864
>ext3_orphan_cleanup: deleting unreferenced inode 33777
>ext3_orphan_cleanup: deleting unreferenced inode 33775
>ext3_orphan_cleanup: deleting unreferenced inode 991260
>ext3_orphan_cleanup: deleting unreferenced inode 991259
>ext3_orphan_cleanup: deleting unreferenced inode 991258
>ext3_orphan_cleanup: deleting unreferenced inode 991257
>ext3_orphan_cleanup: deleting unreferenced inode 991256
>ext3_orphan_cleanup: deleting unreferenced inode 991255
>ext3_orphan_cleanup: deleting unreferenced inode 991254
>ext3_orphan_cleanup: deleting unreferenced inode 991253
>ext3_orphan_cleanup: deleting unreferenced inode 991252
>ext3_orphan_cleanup: deleting unreferenced inode 991251
>ext3_orphan_cleanup: deleting unreferenced inode 991250
>ext3_orphan_cleanup: deleting unreferenced inode 991249
>ext3_orphan_cleanup: deleting unreferenced inode 991248
>ext3_orphan_cleanup: deleting unreferenced inode 991247
>ext3_orphan_cleanup: deleting unreferenced inode 991246
>ext3_orphan_cleanup: deleting unreferenced inode 991245
>ext3_orphan_cleanup: deleting unreferenced inode 991244
>ext3_orphan_cleanup: deleting unreferenced inode 991243
>ext3_orphan_cleanup: deleting unreferenced inode 991242
>ext3_orphan_cleanup: deleting unreferenced inode 33808
>ext3_orphan_cleanup: deleting unreferenced inode 33810
>ext3_orphan_cleanup: deleting unreferenced inode 991240
>ext3_orphan_cleanup: deleting unreferenced inode 991239
>ext3_orphan_cleanup: deleting unreferenced inode 991238
>ext3_orphan_cleanup: deleting unreferenced inode 991237
>ext3_orphan_cleanup: deleting unreferenced inode 991236
>ext3_orphan_cleanup: deleting unreferenced inode 1253393
>ext3_orphan_cleanup: deleting unreferenced inode 1253507
>ext3_orphan_cleanup: deleting unreferenced inode 1319598
>ext3_orphan_cleanup: deleting unreferenced inode 1384561
>ext3_orphan_cleanup: deleting unreferenced inode 1319439
>ext3_orphan_cleanup: deleting unreferenced inode 1384491
>ext3_orphan_cleanup: deleting unreferenced inode 1320044
>ext3_orphan_cleanup: deleting unreferenced inode 1302557
>ext3_orphan_cleanup: deleting unreferenced inode 1385068
>ext3_orphan_cleanup: deleting unreferenced inode 1385054
>ext3_orphan_cleanup: deleting unreferenced inode 1385090
>ext3_orphan_cleanup: deleting unreferenced inode 1385045
>ext3_orphan_cleanup: deleting unreferenced inode 1385041
>ext3_orphan_cleanup: deleting unreferenced inode 1302556
>ext3_orphan_cleanup: deleting unreferenced inode 106550
>ext3_orphan_cleanup: deleting unreferenced inode 1385030
>ext3_orphan_cleanup: deleting unreferenced inode 1384472
>ext3_orphan_cleanup: deleting unreferenced inode 794650
>ext3_orphan_cleanup: deleting unreferenced inode 1384452
>ext3_orphan_cleanup: deleting unreferenced inode 1384451
>EXT3-fs: sdb2: 51 orphan inodes deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1211361067.707:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux:8192 avtab hash slots allocated. Num of rules:166029
>SELinux:8192 avtab hash slots allocated. Num of rules:166029
>security:  8 users, 12 roles, 2308 types, 113 bools, 1 sens, 1024 cats
>security:  72 classes, 166029 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sdb2, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1211361068.274:3): policy loaded auid=4294967295 ses=4294967295
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>scsi4 : pata_marvell
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>scsi5 : pata_marvell
>ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
>ata6: PATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16
>BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00 
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
>iTCO_vendor_support: vendor-support=0
>ACPI: Power Button (CM) [PWRB]
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sr 2:0:0:0: Attached scsi generic sg2 type 5
>Initializing USB Mass Storage driver...
>scsi6 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>scsi7 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00 
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>input: PC Speaker as /devices/platform/pcspkr/input/input6
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>atl1 0000:02:00.0: version 2.0.7
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x1
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2857: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
>ALSA sound/pci/hda/hda_codec.c:2861:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2865:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2866:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:2874:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Line-Out Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Switch, skipped
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sdb2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb5, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 4096532k swap on /dev/sda6.  Priority:-1 extents:1 across:4096532k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>usb-storage: device scan complete
>usb-storage: device scan complete
>scsi 7:0:0:0: Direct-Access     DSE      MicroDrive 2GB   1.00 PQ: 0 ANSI: 2
>scsi 6:0:0:0: Direct-Access     ST332082 0A               3.AA PQ: 0 ANSI: 0
>sd 6:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
>sd 6:0:0:0: [sdc] Write Protect is off
>sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00
>sd 6:0:0:0: [sdc] Assuming drive cache: write through
>sd 6:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
>sd 6:0:0:0: [sdc] Write Protect is off
>sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00
>sd 6:0:0:0: [sdc] Assuming drive cache: write through
> sdc:<6>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>irqbalance[1790]: segfault at 4 ip 3161ca2366 sp 7fff95aa3720 error 6 in libc-2.8.so[3161c00000+162000]
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
> sdc1 sdc2 sdc3 sdc4 < sdc5 >
>sd 6:0:0:0: [sdc] Attached SCSI disk
>sd 6:0:0:0: Attached scsi generic sg3 type 0
>sd 7:0:0:0: [sdd] 4057088 512-byte hardware sectors (2077 MB)
>sd 7:0:0:0: [sdd] Write Protect is off
>sd 7:0:0:0: [sdd] Mode Sense: 23 00 00 00
>sd 7:0:0:0: [sdd] Assuming drive cache: write through
>sd 7:0:0:0: [sdd] 4057088 512-byte hardware sectors (2077 MB)
>sd 7:0:0:0: [sdd] Write Protect is off
>sd 7:0:0:0: [sdd] Mode Sense: 23 00 00 00
>sd 7:0:0:0: [sdd] Assuming drive cache: write through
> sdd: sdd1
>sd 7:0:0:0: [sdd] Attached SCSI removable disk
>sd 7:0:0:0: Attached scsi generic sg4 type 0
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>Machine check events logged
>atl1 0000:02:00.0: Unable to enable MSI: -22
>atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
>eth0: no IPv6 routers present
>yum[3208]: segfault at 7fc018f8d000 ip 3163ccf909 sp 7fff28483510 error 7 in librpmdb-4.4.so[3163c00000+119000]
>------------[ cut here ]------------
>kernel BUG at mm/filemap.c:126!
>invalid opcode: 0000 [1] SMP 
>CPU 0 
>Modules linked in: bridge bnep rfcomm l2cap bluetooth fuse sunrpc ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq freq_table dm_mirror dm_multipath dm_mod snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event ahci snd_seq snd_seq_device pcspkr snd_pcm_oss floppy snd_mixer_oss snd_pcm i2c_i801 i2c_core snd_timer usb_storage atl1 snd_page_alloc sg snd_hwdep iTCO_wdt snd soundcore iTCO_vendor_support button pata_marvell mii sr_mod cdrom ata_piix pata_acpi ata_generic libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
>Pid: 3248, comm: rm Tainted: G   M     2.6.25.3-18.fc9.x86_64 #1
>RIP: 0010:[<ffffffff8107ae76>]  [<ffffffff8107ae76>] __remove_from_page_cache+0x3c/0x8d
>RSP: 0018:ffff8100cb40bcb8  EFLAGS: 00010046
>RAX: 00000000fffffff0 RBX: ffffe20003891278 RCX: 0000000000000005
>RDX: 0000000000002710 RSI: 00000000fffffffe RDI: ffff81000000f000
>RBP: ffff8100cb40bcc8 R08: ffff81012fc02100 R09: 0000000000000000
>R10: 0000000002d56d58 R11: 0000000000000002 R12: ffff8101071c0dd8
>R13: ffff8101071c0dd8 R14: 0000000000000007 R15: ffff8100cb40bdb0
>FS:  00007fdbab7016f0(0000) GS:ffffffff813f6000(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>CR2: 00007fffb37172f0 CR3: 00000000cf99c000 CR4: 00000000000006e0
>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>Process rm (pid: 3248, threadinfo ffff8100cb40a000, task ffff8100cf8b0000)
>Stack:  ffff8101071c0df0 ffffe20003891278 ffff8100cb40bcf8 ffffffff8107aef8
> ffff8100cb40bce8 ffffe20003891278 00000000000000a1 00000000000000a1
> ffff8100cb40bd18 ffffffff81081b69 0000000000000007 ffffe20003891278
>Call Trace:
> [<ffffffff8107aef8>] remove_from_page_cache+0x31/0x45
> [<ffffffff81081b69>] truncate_complete_page+0x39/0x4f
> [<ffffffff81081c6a>] truncate_inode_pages_range+0xeb/0x38a
> [<ffffffff81081f16>] truncate_inode_pages+0xd/0xf
> [<ffffffff88036e9e>] :ext3:ext3_delete_inode+0x18/0xd2
> [<ffffffff88036e86>] ? :ext3:ext3_delete_inode+0x0/0xd2
> [<ffffffff810b855e>] generic_delete_inode+0xaf/0x136
> [<ffffffff810b85fa>] generic_drop_inode+0x15/0x158
> [<ffffffff810b7803>] iput+0x7c/0x80
> [<ffffffff810af596>] do_unlinkat+0xf9/0x14f
> [<ffffffff81013073>] ? syscall_trace_enter+0xb5/0xb9
> [<ffffffff810af71f>] sys_unlinkat+0x24/0x26
> [<ffffffff8100c052>] tracesys+0xd5/0xda
>
>
>Code: 20 49 8d 7c 24 08 e8 d5 47 0b 00 48 c7 43 18 00 00 00 00 49 ff 4c 24 48 be 05 00 00 00 48 89 df e8 a3 9a 00 00 83 7b 0c 00 78 04 <0f> 0b eb fe f6 03 10 74 43 49 8b 44 24 68 f6 40 10 01 75 38 48 
>RIP  [<ffffffff8107ae76>] __remove_from_page_cache+0x3c/0x8d
> RSP <ffff8100cb40bcb8>
>---[ end trace 19e12edef24e1df6 ]---
>BUG: sleeping function called from invalid context at kernel/rwsem.c:21
>in_atomic():0, irqs_disabled():1
>Pid: 3248, comm: rm Tainted: G   M  D  2.6.25.3-18.fc9.x86_64 #1
>
>Call Trace:
> [<ffffffff8104a5fe>] ? lock_hrtimer_base+0x25/0x4b
> [<ffffffff8102aa71>] __might_sleep+0xb4/0xb6
> [<ffffffff812913a2>] down_read+0x1d/0x2e
> [<ffffffff8105d3f5>] acct_collect+0x42/0x19f
> [<ffffffff81037bf8>] do_exit+0x21d/0x656
> [<ffffffff81292c6d>] oops_begin+0x0/0x90
> [<ffffffff8100d942>] die+0x5d/0x66
> [<ffffffff81293141>] do_trap+0x110/0x11f
> [<ffffffff8100dfec>] do_invalid_op+0x93/0x9c
> [<ffffffff8107ae76>] ? __remove_from_page_cache+0x3c/0x8d
> [<ffffffff8112f832>] ? radix_tree_delete+0x207/0x21c
> [<ffffffff812926d9>] error_exit+0x0/0x51
> [<ffffffff8107ae76>] ? __remove_from_page_cache+0x3c/0x8d
> [<ffffffff8107ae70>] ? __remove_from_page_cache+0x36/0x8d
> [<ffffffff8107aef8>] ? remove_from_page_cache+0x31/0x45
> [<ffffffff81081b69>] ? truncate_complete_page+0x39/0x4f
> [<ffffffff81081c6a>] ? truncate_inode_pages_range+0xeb/0x38a
> [<ffffffff81081f16>] ? truncate_inode_pages+0xd/0xf
> [<ffffffff88036e9e>] ? :ext3:ext3_delete_inode+0x18/0xd2
> [<ffffffff88036e86>] ? :ext3:ext3_delete_inode+0x0/0xd2
> [<ffffffff810b855e>] ? generic_delete_inode+0xaf/0x136
> [<ffffffff810b85fa>] ? generic_drop_inode+0x15/0x158
> [<ffffffff810b7803>] ? iput+0x7c/0x80
> [<ffffffff810af596>] ? do_unlinkat+0xf9/0x14f
> [<ffffffff81013073>] ? syscall_trace_enter+0xb5/0xb9
> [<ffffffff810af71f>] ? sys_unlinkat+0x24/0x26
> [<ffffffff8100c052>] ? tracesys+0xd5/0xda
>
>wish[3370]: segfault at 18 ip 3161c808f0 sp 7fff1490fef8 error 4 in libc-2.8.so[3161c00000+162000]
>wish[3528] general protection ip:3161c808f0 sp:7fff61504d28 error:0 in libc-2.8.so[3161c00000+162000]
>end_request: I/O error, dev sr0, sector 8388024
>Buffer I/O error on device sr0, logical block 1048503
>Buffer I/O error on device sr0, logical block 1048504
>Buffer I/O error on device sr0, logical block 1048505
>end_request: I/O error, dev sr0, sector 8388032
>Buffer I/O error on device sr0, logical block 1048504
>end_request: I/O error, dev sr0, sector 8388056
>Buffer I/O error on device sr0, logical block 1048507
>Buffer I/O error on device sr0, logical block 1048508
>Buffer I/O error on device sr0, logical block 1048509
>Buffer I/O error on device sr0, logical block 1048510
>Buffer I/O error on device sr0, logical block 1048511
>Buffer I/O error on device sr0, logical block 1048512
>usb 3-2: USB disconnect, address 3
>hub 1-0:1.0: unable to enumerate USB device on port 2
>usb 3-2: new low speed USB device using uhci_hcd and address 4
>usb 3-2: configuration #1 chosen from 1 choice
>input: Cypress Cypress PS/2 Keyboard - PS/2 Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input7
>input,hidraw1: USB HID v1.00 Keyboard [Cypress Cypress PS/2 Keyboard - PS/2 Mouse] on usb-0000:00:1a.0-2
>input: Cypress Cypress PS/2 Keyboard - PS/2 Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input8
>input,hidraw2: USB HID v1.00 Mouse [Cypress Cypress PS/2 Keyboard - PS/2 Mouse] on usb-0000:00:1a.0-2
>usb 3-2: New USB device found, idVendor=04b4, idProduct=8081
>usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-2: Product: Cypress PS/2 Keyboard - PS/2 Mouse
>usb 3-2: Manufacturer: Cypress
>usb 3-2: USB disconnect, address 4
>hub 1-0:1.0: unable to enumerate USB device on port 2
>usb 3-2: new low speed USB device using uhci_hcd and address 5
>usb 3-2: configuration #1 chosen from 1 choice
>input: Cypress Cypress PS/2 Keyboard - PS/2 Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input9
>input,hidraw1: USB HID v1.00 Keyboard [Cypress Cypress PS/2 Keyboard - PS/2 Mouse] on usb-0000:00:1a.0-2
>input: Cypress Cypress PS/2 Keyboard - PS/2 Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input10
>input,hidraw2: USB HID v1.00 Mouse [Cypress Cypress PS/2 Keyboard - PS/2 Mouse] on usb-0000:00:1a.0-2
>usb 3-2: New USB device found, idVendor=04b4, idProduct=8081
>usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-2: Product: Cypress PS/2 Keyboard - PS/2 Mouse
>usb 3-2: Manufacturer: Cypress
>end_request: I/O error, dev sr0, sector 8388020
>printk: 1 messages suppressed.
>Buffer I/O error on device sr0, logical block 2097005
>Buffer I/O error on device sr0, logical block 2097006
>Buffer I/O error on device sr0, logical block 2097007
>Buffer I/O error on device sr0, logical block 2097008
>Buffer I/O error on device sr0, logical block 2097009
>Buffer I/O error on device sr0, logical block 2097010
>Buffer I/O error on device sr0, logical block 2097011
>klauncher[2502] general protection ip:3163842ae8 sp:7ffff133de70 error:0 in libX11.so.6.2.0[3163800000+106000]
>Eeek! page_mapcount(page) went negative! (-1)
>  page pfn = 2979
>  page->flags = 8000001007c
>  page->count = 1
>  page->mapping = ffff8100cb2b41d8
>  vma->vm_ops = 0x0
>------------[ cut here ]------------
>kernel BUG at mm/rmap.c:669!
>invalid opcode: 0000 [2] SMP 
>CPU 0 
>Modules linked in: bridge bnep rfcomm l2cap bluetooth fuse sunrpc ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq freq_table dm_mirror dm_multipath dm_mod snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event ahci snd_seq snd_seq_device pcspkr snd_pcm_oss floppy snd_mixer_oss snd_pcm i2c_i801 i2c_core snd_timer usb_storage atl1 snd_page_alloc sg snd_hwdep iTCO_wdt snd soundcore iTCO_vendor_support button pata_marvell mii sr_mod cdrom ata_piix pata_acpi ata_generic libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
>Pid: 2326, comm: X Tainted: G   M  D  2.6.25.3-18.fc9.x86_64 #1
>RIP: 0010:[<ffffffff8108f093>]  [<ffffffff8108f093>] page_remove_rmap+0x120/0x13a
>RSP: 0018:ffff8101238d3d48  EFLAGS: 00010246
>RAX: 0000000000000000 RBX: ffffe20000091278 RCX: ffffffff8136ba54
>RDX: 0000000000008282 RSI: 0000000000000046 RDI: ffffffff814e64e4
>RBP: ffff8101238d3d58 R08: 0000000000000000 R09: 00000000ffffffff
>R10: ffffffff8136ba6a R11: 0000000000000030 R12: ffff8101188e0e70
>R13: 00007ff586d6a000 R14: 00000000001fb000 R15: ffff8100cf8f8b50
>FS:  00007ff599fba780(0000) GS:ffffffff813f6000(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: 0000000004d52e60 CR3: 0000000000201000 CR4: 00000000000006e0
>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>Process X (pid: 2326, threadinfo ffff8101238d2000, task ffff8101238ac000)
>Stack:  8000000002979020 ffffe20000091278 ffff8101238d3e58 ffffffff8108743f
> 80000001235eb067 00007ff587ab5fff 00007ff587ab5fff 00007ff587ab5fff
> 0000000000000000 ffff8101238d3e70 ffffffffffffffff 0000000000000000
>Call Trace:
> [<ffffffff8108743f>] unmap_vmas+0x45d/0x7a4
> [<ffffffff8108b0a5>] exit_mmap+0x76/0xed
> [<ffffffff8103248f>] mmput+0x42/0x8e
> [<ffffffff81036185>] exit_mm+0xf2/0xfa
> [<ffffffff81037c5a>] do_exit+0x27f/0x656
> [<ffffffff810380ac>] do_group_exit+0x7b/0x96
> [<ffffffff810380d9>] sys_exit_group+0x12/0x14
> [<ffffffff8100c052>] tracesys+0xd5/0xda
>
>
>Code: e8 41 92 fc ff 49 8b 84 24 90 00 00 00 48 85 c0 74 19 48 8b 40 20 48 85 c0 74 10 48 8b 70 58 48 c7 c7 a8 ba 36 81 e8 1b 92 fc ff <0f> 0b eb fe 48 8b 77 18 83 e6 01 f7 de 83 c6 04 e8 6b 58 ff ff 
>RIP  [<ffffffff8108f093>] page_remove_rmap+0x120/0x13a
> RSP <ffff8101238d3d48>
>---[ end trace 19e12edef24e1df6 ]---
>Fixing recursive fault but reboot is needed!

Actions: View

Attachments on bug 447826: 306326 | 306449