Attachment 306387 Details for Bug 447924 – lspci -vvv output

lspci -vvv output

lspcivvv.log (text/plain), 47.78 KB, created by Tom Tracy on 2008-05-22 14:04:31 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tom Tracy

Created: 2008-05-22 14:04:31 UTC

Size: 47.78 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation 5400 Chipset Memory Controller Hub (rev 20)
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 10
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>		Address: fee00000  Data: 0000
>	Capabilities: [6c] Express Root Port (Slot-) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 0
>		Link: Latency L0s <1us, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [100] Advanced Error Reporting
>
>00:01.0 PCI bridge: Intel Corporation 5400 Chipset PCI Express Port 1 (rev 20) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=01, subordinate=04, sec-latency=0
>	I/O behind bridge: 00002000-00003fff
>	Memory behind bridge: d8300000-d84fffff
>	Prefetchable memory behind bridge: 00000000d8800000-00000000d8800000
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>		Address: feeff00c  Data: 4179
>	Capabilities: [6c] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed unknown, Width x8, ASPM L0s L1, Port 4
>		Link: Latency L0s <1us, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
>		Slot: Number 0, PowerLimit 0.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Off, PwrInd Off, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [b0] #0d [0000]
>	Capabilities: [100] Advanced Error Reporting
>
>00:03.0 PCI bridge: Intel Corporation 5400 Chipset PCI Express Port 3 (rev 20) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
>	I/O behind bridge: 0000f000-00000fff
>	Memory behind bridge: fff00000-000fffff
>	Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>		Address: feeff00c  Data: 4181
>	Capabilities: [6c] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed unknown, Width x8, ASPM L0s L1, Port 6
>		Link: Latency L0s <1us, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x0
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
>		Slot: Number 0, PowerLimit 0.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Off, PwrInd Off, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [b0] #0d [0000]
>	Capabilities: [100] Advanced Error Reporting
>
>00:05.0 PCI bridge: Intel Corporation 5400 Chipset PCI Express Port 5 (rev 20) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
>	I/O behind bridge: 0000f000-00000fff
>	Memory behind bridge: fff00000-000fffff
>	Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>		Address: feeff00c  Data: 4189
>	Capabilities: [6c] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed unknown, Width x8, ASPM L0s L1, Port 8
>		Link: Latency L0s <1us, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x0
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
>		Slot: Number 0, PowerLimit 0.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Off, PwrInd Off, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [b0] #0d [0000]
>	Capabilities: [100] Advanced Error Reporting
>
>00:07.0 PCI bridge: Intel Corporation 5400 Chipset PCI Express Port 7 (rev 20) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=07, subordinate=0a, sec-latency=0
>	I/O behind bridge: 00004000-00005fff
>	Memory behind bridge: d8000000-d82fffff
>	Prefetchable memory behind bridge: 00000000d8900000-00000000d8900000
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>		Address: feeff00c  Data: 4191
>	Capabilities: [6c] Express Root Port (Slot-) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed unknown, Width x8, ASPM L0s L1, Port 10
>		Link: Latency L0s <1us, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x8
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [b0] #0d [0000]
>	Capabilities: [100] Advanced Error Reporting
>
>00:09.0 PCI bridge: Intel Corporation 5400 Chipset PCI Express Port 9 (rev 20) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
>	I/O behind bridge: 00006000-00006fff
>	Memory behind bridge: d8500000-d85fffff
>	Prefetchable memory behind bridge: 00000000d8b00000-00000000d8b00000
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>		Address: feeff00c  Data: 4199
>	Capabilities: [6c] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed unknown, Width x4, ASPM L0s L1, Port 12
>		Link: Latency L0s <1us, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
>		Slot: Number 0, PowerLimit 0.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Off, PwrInd Off, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [b0] #0d [0000]
>	Capabilities: [100] Advanced Error Reporting
>
>00:0f.0 System peripheral: Intel Corporation 5400 Chipset QuickData Technology Device (rev 20)
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 10
>	Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] MSI-X: Enable- Mask- TabSize=4
>		Vector table: BAR=0 offset=00002000
>		PBA: BAR=0 offset=00003000
>	Capabilities: [6c] Express Unknown type IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
>		Link: Latency L0s <64ns, L1 <1us
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed unknown, Width x0
>
>00:10.0 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 20)
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:10.1 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 20)
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:10.2 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 20)
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:10.3 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 20)
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:10.4 Host bridge: Intel Corporation 5400 Chipset FSB Registers (rev 20)
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:11.0 Host bridge: Intel Corporation 5400 Chipset CE/SF Registers (rev 20)
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:15.0 Host bridge: Intel Corporation 5400 Chipset FBD Registers (rev 20)
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:15.1 Host bridge: Intel Corporation 5400 Chipset FBD Registers (rev 20)
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:16.0 Host bridge: Intel Corporation 5400 Chipset FBD Registers (rev 20)
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:16.1 Host bridge: Intel Corporation 5400 Chipset FBD Registers (rev 20)
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 09) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
>	I/O behind bridge: 00007000-00007fff
>	Memory behind bridge: d8700000-d87fffff
>	Prefetchable memory behind bridge: 00000000d8c00000-00000000d8c00000
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 1
>		Link: Latency L0s <256ns, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
>		Slot: Number 1, PowerLimit 28.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Unknown, PwrInd Unknown, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>		Address: feeff00c  Data: 41a1
>	Capabilities: [90] #0d [0000]
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [100] Virtual Channel
>	Capabilities: [180] Unknown (5)
>
>00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09) (prog-if 00 [UHCI])
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 20
>	Region 4: I/O ports at 1800 [size=32]
>
>00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09) (prog-if 00 [UHCI])
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 21
>	Region 4: I/O ports at 1820 [size=32]
>
>00:1d.2 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09) (prog-if 00 [UHCI])
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 22
>	Region 4: I/O ports at 1840 [size=32]
>
>00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09) (prog-if 20 [EHCI])
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 23
>	Region 0: Memory at d8a04000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port
>
>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=32
>	I/O behind bridge: 00008000-00008fff
>	Memory behind bridge: d8600000-d86fffff
>	Prefetchable memory behind bridge: 00000000d0000000-00000000d7f00000
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>	Capabilities: [50] #0d [0000]
>
>00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09)
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>
>00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller (rev 09) (prog-if 8a [Master SecP PriP])
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 16
>	Region 0: I/O ports at 01f0 [size=8]
>	Region 1: I/O ports at 03f4 [size=1]
>	Region 2: I/O ports at 0170 [size=8]
>	Region 3: I/O ports at 0374 [size=1]
>	Region 4: I/O ports at 1860 [size=16]
>
>00:1f.2 IDE interface: Intel Corporation 631xESB/632xESB/3100 Chipset SATA IDE Controller (rev 09) (prog-if 8f [Master SecP SecO PriP PriO])
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 17
>	Region 0: I/O ports at 18a0 [size=8]
>	Region 1: I/O ports at 1898 [size=4]
>	Region 2: I/O ports at 1890 [size=8]
>	Region 3: I/O ports at 1874 [size=4]
>	Region 4: I/O ports at 1880 [size=16]
>	Region 5: Memory at d8a04400 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller (rev 09)
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin C routed to IRQ 18
>	Region 4: I/O ports at 1100 [size=32]
>
>01:00.0 PCI bridge: Integrated Device Technology, Inc. Unknown device 8018 (rev 04) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=01, secondary=02, subordinate=04, sec-latency=0
>	I/O behind bridge: 00002000-00003fff
>	Memory behind bridge: d8300000-d84fffff
>	Prefetchable memory behind bridge: 00000000d8800000-00000000d8800000
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Express Upstream Port IRQ 0
>		Device: Supported: MaxPayload 2048 bytes, PhantFunc 0, ExtTag+
>		Device: Latency L0s <64ns, L1 <1us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: SlotPowerLimit 0.000000
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 0
>		Link: Latency L0s <2us, L1 <4us
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [100] Virtual Channel
>
>02:00.0 PCI bridge: Integrated Device Technology, Inc. Unknown device 8018 (rev 04) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
>	I/O behind bridge: 00002000-00002fff
>	Memory behind bridge: d8300000-d83fffff
>	Prefetchable memory behind bridge: 00000000d8800000-00000000d8800000
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Express Downstream Port (Slot-) IRQ 0
>		Device: Supported: MaxPayload 2048 bytes, PhantFunc 0, ExtTag+
>		Device: Latency L0s <64ns, L1 <1us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 1
>		Link: Latency L0s <2us, L1 <4us
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [7c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 00000000feeff00c  Data: 41a9
>	Capabilities: [100] Virtual Channel
>
>02:01.0 PCI bridge: Integrated Device Technology, Inc. Unknown device 8018 (rev 04) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=02, secondary=04, subordinate=04, sec-latency=0
>	I/O behind bridge: 00003000-00003fff
>	Memory behind bridge: d8400000-d84fffff
>	Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Express Downstream Port (Slot-) IRQ 0
>		Device: Supported: MaxPayload 2048 bytes, PhantFunc 0, ExtTag+
>		Device: Latency L0s <64ns, L1 <1us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 2
>		Link: Latency L0s <2us, L1 <4us
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [7c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 00000000feeff00c  Data: 41b1
>	Capabilities: [100] Virtual Channel
>
>03:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (Fiber) (rev 06)
>	Subsystem: Intel Corporation PRO/1000 PF Quad Port Server Adapter
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin B routed to IRQ 2292
>	Region 0: Memory at d8320000 (32-bit, non-prefetchable) [size=128K]
>	Region 1: Memory at d8300000 (32-bit, non-prefetchable) [size=128K]
>	Region 2: I/O ports at 2000 [size=32]
>	[virtual] Expansion ROM at d8800000 [disabled] [size=128K]
>	Capabilities: [c8] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+
>		Address: 00000000feeff00c  Data: 4172
>	Capabilities: [e0] Express Endpoint IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <64us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 0
>		Link: Latency L0s <4us, L1 <64us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>	Capabilities: [100] Advanced Error Reporting
>	Capabilities: [140] Device Serial Number 58-9e-1d-ff-ff-17-15-00
>
>03:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (Fiber) (rev 06)
>	Subsystem: Intel Corporation PRO/1000 PF Quad Port Server Adapter
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 2290
>	Region 0: Memory at d8360000 (32-bit, non-prefetchable) [size=128K]
>	Region 1: Memory at d8340000 (32-bit, non-prefetchable) [size=128K]
>	Region 2: I/O ports at 2020 [size=32]
>	[virtual] Expansion ROM at d8820000 [disabled] [size=128K]
>	Capabilities: [c8] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+
>		Address: 00000000feeff00c  Data: 4182
>	Capabilities: [e0] Express Endpoint IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <64us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 0
>		Link: Latency L0s <4us, L1 <64us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>	Capabilities: [100] Advanced Error Reporting
>	Capabilities: [140] Device Serial Number 58-9e-1d-ff-ff-17-15-00
>
>04:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (Fiber) (rev 06)
>	Subsystem: Intel Corporation PRO/1000 PF Quad Port Server Adapter
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin B routed to IRQ 2291
>	Region 0: Memory at d8420000 (32-bit, non-prefetchable) [size=128K]
>	Region 1: Memory at d8400000 (32-bit, non-prefetchable) [size=128K]
>	Region 2: I/O ports at 3000 [size=32]
>	Capabilities: [c8] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+
>		Address: 00000000feeff00c  Data: 417a
>	Capabilities: [e0] Express Endpoint IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <64us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 0
>		Link: Latency L0s <4us, L1 <64us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>	Capabilities: [100] Advanced Error Reporting
>	Capabilities: [140] Device Serial Number 5a-9e-1d-ff-ff-17-15-00
>
>04:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (Fiber) (rev 06)
>	Subsystem: Intel Corporation PRO/1000 PF Quad Port Server Adapter
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 2289
>	Region 0: Memory at d8460000 (32-bit, non-prefetchable) [size=128K]
>	Region 1: Memory at d8440000 (32-bit, non-prefetchable) [size=128K]
>	Region 2: I/O ports at 3020 [size=32]
>	Capabilities: [c8] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+
>		Address: 00000000feeff00c  Data: 418a
>	Capabilities: [e0] Express Endpoint IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <64us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 0
>		Link: Latency L0s <4us, L1 <64us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>	Capabilities: [100] Advanced Error Reporting
>	Capabilities: [140] Device Serial Number 5a-9e-1d-ff-ff-17-15-00
>
>07:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=07, secondary=08, subordinate=09, sec-latency=0
>	I/O behind bridge: 00004000-00004fff
>	Memory behind bridge: d8000000-d80fffff
>	Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [44] Express Upstream Port IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: SlotPowerLimit 0.000000
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x8
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [80] #0d [0000]
>	Capabilities: [100] Advanced Error Reporting
>
>07:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=07, secondary=0a, subordinate=0a, sec-latency=64
>	I/O behind bridge: 00005000-00005fff
>	Memory behind bridge: d8100000-d81fffff
>	Prefetchable memory behind bridge: 00000000d8900000-00000000d8900000
>	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal+ Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 256 bytes, MaxReadReq 256 bytes
>		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x8
>	Capabilities: [6c] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [80] #0d [0000]
>	Capabilities: [d8] PCI-X bridge device
>		Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
>		Status: Dev=00:00.3 64bit- 133MHz- SCD- USC- SCO- SRD-
>		Upstream: Capacity=65535 CommitmentLimit=65535
>		Downstream: Capacity=65535 CommitmentLimit=65535
>	Capabilities: [100] Advanced Error Reporting
>
>08:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=08, secondary=09, subordinate=09, sec-latency=0
>	I/O behind bridge: 00004000-00004fff
>	Memory behind bridge: d8000000-d80fffff
>	Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [44] Express Downstream Port (Slot-) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 2048 bytes
>		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x8
>	Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 00000000feeff00c  Data: 41b9
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [80] #0d [0000]
>	Capabilities: [100] Advanced Error Reporting
>
>09:00.0 Ethernet controller: Intel Corporation 82598EB 10 Gigabit AF Network Connection (rev 01)
>	Subsystem: Intel Corporation 10 Gigabit XF SR Server Adapter
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 54
>	Region 0: Memory at d8040000 (32-bit, non-prefetchable) [size=128K]
>	Region 1: Memory at d8000000 (32-bit, non-prefetchable) [size=256K]
>	Region 2: I/O ports at 4000 [size=32]
>	Region 3: Memory at d8060000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: [40] Power Management version 3
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [60] MSI-X: Enable+ Mask- TabSize=18
>		Vector table: BAR=3 offset=00000000
>		PBA: BAR=3 offset=00002000
>	Capabilities: [a0] Express Endpoint IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <64us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s L1, Port 0
>		Link: Latency L0s <4us, L1 <64us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x8
>	Capabilities: [100] Advanced Error Reporting
>	Capabilities: [140] Device Serial Number d6-ea-10-ff-ff-21-1b-00
>
>0a:02.0 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
>	Subsystem: Intel Corporation PRO/1000 MT Dual Port Server Adapter
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 52 (63750ns min), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 28
>	Region 0: Memory at d8180000 (64-bit, non-prefetchable) [size=128K]
>	Region 2: Memory at d8100000 (64-bit, non-prefetchable) [size=256K]
>	Region 4: I/O ports at 5000 [size=64]
>	[virtual] Expansion ROM at d8900000 [disabled] [size=256K]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [e4] PCI-X non-bridge device
>		Command: DPERE- ERO+ RBC=512 OST=1
>		Status: Dev=0a:02.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
>	Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>
>0a:02.1 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
>	Subsystem: Intel Corporation PRO/1000 MT Dual Port Server Adapter
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 52 (63750ns min), Cache Line Size: 32 bytes
>	Interrupt: pin B routed to IRQ 29
>	Region 0: Memory at d81a0000 (64-bit, non-prefetchable) [size=128K]
>	Region 2: Memory at d8140000 (64-bit, non-prefetchable) [size=256K]
>	Region 4: I/O ports at 5040 [size=64]
>	[virtual] Expansion ROM at d8940000 [disabled] [size=256K]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [e4] PCI-X non-bridge device
>		Command: DPERE- ERO+ RBC=512 OST=1
>		Status: Dev=0a:02.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
>	Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>
>0b:00.0 Ethernet controller: Intel Corporation 82575EB Gigabit Network Connection (rev 02)
>	Subsystem: Super Micro Computer Inc Unknown device 10a7
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 10
>	Region 0: Memory at d8540000 (32-bit, non-prefetchable) [size=128K]
>	Region 1: Memory at d8520000 (32-bit, non-prefetchable) [size=128K]
>	Region 2: I/O ports at 6000 [size=32]
>	Region 3: Memory at d8500000 (32-bit, non-prefetchable) [size=16K]
>	[virtual] Expansion ROM at d8b00000 [disabled] [size=128K]
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
>	Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [60] MSI-X: Enable- Mask- TabSize=10
>		Vector table: BAR=3 offset=00000000
>		PBA: BAR=3 offset=00002000
>	Capabilities: [a0] Express Endpoint IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <64us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 12
>		Link: Latency L0s <4us, L1 <64us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>	Capabilities: [100] Advanced Error Reporting
>	Capabilities: [140] Device Serial Number 40-cf-7c-ff-ff-48-30-00
>
>0b:00.1 Ethernet controller: Intel Corporation 82575EB Gigabit Network Connection (rev 02)
>	Subsystem: Super Micro Computer Inc Unknown device 10a7
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin B routed to IRQ 11
>	Region 0: Memory at d8580000 (32-bit, non-prefetchable) [size=128K]
>	Region 1: Memory at d8560000 (32-bit, non-prefetchable) [size=128K]
>	Region 2: I/O ports at 6020 [size=32]
>	Region 3: Memory at d8504000 (32-bit, non-prefetchable) [size=16K]
>	[virtual] Expansion ROM at d8b20000 [disabled] [size=128K]
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
>	Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [60] MSI-X: Enable- Mask- TabSize=10
>		Vector table: BAR=3 offset=00000000
>		PBA: BAR=3 offset=00002000
>	Capabilities: [a0] Express Endpoint IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <64us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 12
>		Link: Latency L0s <4us, L1 <64us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>	Capabilities: [100] Advanced Error Reporting
>	Capabilities: [140] Device Serial Number 40-cf-7c-ff-ff-48-30-00
>
>0c:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 02)
>	Subsystem: QLogic Corp. Unknown device 0138
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 2294
>	Region 0: I/O ports at 7000 [size=256]
>	Region 1: Memory at d8700000 (64-bit, non-prefetchable) [size=16K]
>	[virtual] Expansion ROM at d8c00000 [disabled] [size=256K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [4c] Express Endpoint IRQ 0
>		Device: Supported: MaxPayload 1024 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <4us, L1 <1us
>		Device: AtnBtn+ AtnInd+ PwrInd+
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 2048 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 0
>		Link: Latency L0s <4us, L1 unlimited
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch+
>		Link: Speed 2.5Gb/s, Width x4
>	Capabilities: [64] Message Signalled Interrupts: 64bit+ Queue=0/4 Enable+
>		Address: 00000000feeff00c  Data: 41e9
>	Capabilities: [74] Vital Product Data
>	Capabilities: [7c] MSI-X: Enable- Mask- TabSize=16
>		Vector table: BAR=1 offset=00002000
>		PBA: BAR=1 offset=00003000
>	Capabilities: [100] Advanced Error Reporting
>	Capabilities: [138] Power Budgeting
>
>0c:00.1 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 02)
>	Subsystem: QLogic Corp. Unknown device 0138
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin B routed to IRQ 2293
>	Region 0: I/O ports at 7400 [size=256]
>	Region 1: Memory at d8704000 (64-bit, non-prefetchable) [size=16K]
>	[virtual] Expansion ROM at d8c40000 [disabled] [size=256K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [4c] Express Endpoint IRQ 0
>		Device: Supported: MaxPayload 1024 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <4us, L1 <1us
>		Device: AtnBtn+ AtnInd+ PwrInd+
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 2048 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 0
>		Link: Latency L0s <4us, L1 unlimited
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch+
>		Link: Speed 2.5Gb/s, Width x4
>	Capabilities: [64] Message Signalled Interrupts: 64bit+ Queue=0/4 Enable+
>		Address: 00000000feeff00c  Data: 4142
>	Capabilities: [74] Vital Product Data
>	Capabilities: [7c] MSI-X: Enable- Mask- TabSize=16
>		Vector table: BAR=1 offset=00002000
>		PBA: BAR=1 offset=00003000
>	Capabilities: [100] Advanced Error Reporting
>	Capabilities: [138] Power Budgeting
>
>0d:01.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA controller])
>	Subsystem: Super Micro Computer Inc Unknown device a280
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B+
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 66 (2000ns min), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
>	Region 1: I/O ports at 8000 [size=256]
>	Region 2: Memory at d8600000 (32-bit, non-prefetchable) [size=64K]
>	[virtual] Expansion ROM at d8620000 [disabled] [size=128K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>

Actions: View

Attachments on bug 447924: 306386 | 306387